PLplot

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv13453

Modified Files:
	configure 
Log Message:
regenerated with autoconf

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv15582

Modified Files:
	configure 
Log Message:
Merged my modification of the -I ordering with Maurice's preempting
commit.  Also reworked the handling of EXTRA_LIBS to avoid appending
duplicates to LIBS.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv24141

Modified Files:
	Makefile 
Log Message:
Rule to build configure file.  Now just 'make configure' from the top will
cause it to be built and moved into place.  This will be done automatically
when any of configure.in, sysconf.in, or sysloc.in are changed & make is
invoked from the top level.  In this case configure is rerun automatically,
using the reconfig script if present, or just configure if not.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv24605

Modified Files:
	.cvsignore 
Log Message:
Added reconfig to ignore list.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv24771

Modified Files:
	configure 
Log Message:
Respamulated.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv32743

Modified Files:
	configure 
Log Message:
Respamulatto.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv31680

Modified Files:
	configure 
Log Message:
Respamgurlated.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv17860

Modified Files:
	configure 
Log Message:
regenerate with autoconf

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv4248

Modified Files:
	configure 
Log Message:
OOPS.  Forgot to regenerate this until now for stupidtk changes.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv25859

Modified Files:
	configure 
Log Message:
Respamulated.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv2627

Modified Files:
	configure 
Log Message:
regenerated by autoconf

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv30170

Modified Files:
	configure 
Log Message:
regenerated

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv30080

Modified Files:
	configure 
Log Message:
Regurgitated.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv15552

Modified Files:
	configure 
Log Message:
Regenerated from all the latest stuff.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv32600

Modified Files:
	configure 
Log Message:
autoconf the sucker!

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv21064

Modified Files:
	configure 
Log Message:
Stripped support for the long-defunct tcl-dp driver.  There is still code
remaining but it can never be active (only preserved for my future
reference).  A few cleanups as well.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv11585

Modified Files:
	configure 
Log Message:
Regenerated

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv22689

Modified Files:
	configure 
Log Message:
FHS compliance changes.  "Data" files (maps & fonts) are now installed under
$prefix/lib/plplot<version> ($DATA_DIR).  Only the library files (*.so*) go
into $prefix/lib ($LIB_DIR).
Also implemented the centralized release version control in configure.in,
just after AC_INIT, through the macro PACKAGE_VERSION.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv26136

Modified Files:
	configure 
Log Message:
Install data files in the default $prefix/lib/plplot<version>/data dir.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv20901

Modified Files:
	configure 
Log Message:
Regenerate with autoconf to make consistent with last night's changes

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv13285

Modified Files:
	configure 
Log Message:
autoconf

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv14680

Modified Files:
	configure 
Log Message:
regenerate

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv17900

Modified Files:
	configure 
Log Message:
Rekabobulated.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv13189

Modified Files:
	configure 
Log Message:
regenerated.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv20711

Modified Files:
	configure 
Log Message:
Added plplot-config script, which provides cflags and linkage
information for compiling PLplot applications.  This scripts replaces
plplot_linkjage, which was previously generated during the make
process.  The source file is cf/plplot-config.in, in which several
variables are AC_SUBST'ituted.  Some files in cf/ have been changed in
order to make this work.  The most important change regards the
variables {PL,MAT,CXX}LIB_NAME, whose values are set in configure.in
instead of in the Makefile-fragment init.in.  This seems more logical,
at any rate.  Also, install.in was changes to install plplot-config
instead of generating plplot_linkage.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv17879

Modified Files:
	configure 
Log Message:
Resuckulated.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv21115

Modified Files:
      Tag: GNOME
	configure 
Log Message:
Initial checkin for the Gnome driver

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv5452

Modified Files:
	configure 
Log Message:
Merged the GNOME branch into MAIN.  The building of the gnome driver is
disabled by default.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv8513

Modified Files:
	configure 
Log Message:
re-generate corresponding to recent changes

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv22459

Modified Files:
	configure 
Log Message:
Patch by Dean Clamons to clean up some problems seen on HPUX.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv9489

Modified Files:
	configure 
Log Message:
support for Octave.
Should this file be in in CVS? Why not use 'autogen' for development?

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv6282

Modified Files:
	configure 
Log Message:
regenerate

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv22878

Modified Files:
	configure 
Log Message:
redo

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv16496

Modified Files:
	configure 
Log Message:
redo

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv18103

Modified Files:
	configure 
Log Message:
redo

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv31070

Modified Files:
	configure 
Log Message:
redo

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv4491

Modified Files:
	configure 
Log Message:
redo

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv13529

Modified Files:
	configure 
Log Message:
redo

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv22293

Modified Files:
	configure 
Log Message:
Regenerated using wrapper around AC_LANG_CPLUSPLUS to avoid side effects.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv23051

Modified Files:
	configure 
Log Message:
redo

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv3318

Modified Files:
	configure 
Log Message:
Test for png support in libgd.  (Some ancient versions of this library, e.g.,
the version on RedHat 6.2, only support giff).

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv15653

Modified Files:
	configure 
Log Message:
Is it still under CVS control? :-)
Update to reflect Octave bindings build changes.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv1647

Removed Files:
	configure 
Log Message:
Well gentleman, the historic moment has arrived.  Consensus has been reached
that the generated configure should not be in cvs so this is it!

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv4415

Modified Files:
	.cvsignore 
Log Message:
Exclude configure!

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv24428

Modified Files:
	tarup 
Log Message:
Fixed bug.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv3110

Modified Files:
	Makefile 
Log Message:
add cf/aclocal.m4 and cf/version.in dependencies to configure target

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv20496

Added Files:
      Tag: AM-LT
	Makefile.am bootstrap.sh configure.in 
Log Message:

Welcome to the new era of Automake/Libtool configuration for PLplot.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv23098

Modified Files:
      Tag: AM-LT
	bootstrap.sh 
Log Message:
Trying to chmod.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv23879

Modified Files:
      Tag: AM-LT
	bootstrap.sh 
Log Message:
Trying to chmod (again).

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv27232

Added Files:
      Tag: AM-LT
	AUTHORS ChangeLog 
Log Message:

[This is only fot the AM-LT branch.]

The files AUTHORS and ChangeLog are required by Automake.  They are
good to have in the project, anyway.  The later is empty for now.  In
the former, I put the names and SourceForge e-mail addresses of the 7
current members of the PLplot development team.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv27512

Modified Files:
      Tag: AM-LT
	.cvsignore 
Log Message:

Better exclusions for the AM-LT branch.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv28304

Removed Files:
      Tag: AM-LT
	Makefile 
Log Message:

Removing Makefile for top_buildir, since it is always automatically
generated by the configure script under the automake/libtool scheme.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv28967

Modified Files:
      Tag: AM-LT
	.cvsignore 
Log Message:

Improved exclusions for the AM-LT branch.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv28289

Modified Files:
      Tag: AM-LT
	.cvsignore 
Log Message:

Better exclusions.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv30530

Modified Files:
      Tag: AM-LT
	Makefile.am bootstrap.sh configure.in 
Log Message:

This is a first try at installing the PLplot data files (*.fnt and
*.map).  They are now properly being installed into
$prefix/lib/$PACKAGE$VERSION, but I am wondering if "share" would not
be more appropriate than "lib" here.  This is as simple as defining
the Automake variable pkgdata_DATA in lib/Makefile.am.

However, I faced a lot of complications in doing this.  One of them
came from the fact that, traditionally, PLplot used the DATA_DIR
variable, both in source (src/plctrl.c) and in the Makefile.  I have
to redefine pkgdatadir in lib/Makefile.am in order to have this
working.  Also, in doing that, I ran into a series of headaches
involving autoheader.  I fixed everything for now by including the
required file acconfig.h in top_srcdir and by removing
include/plConfig.h from the project.  Also, autoheader (and a
seemingly mysterious "touch" command) have been included in
bootstrap.sh.  In order to have all this working, the top level
Makefile.am and configure.in had to be slightly changed.

Several issues are popping up now and will be soon discussed in
plplot-devel.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv18344

Added Files:
      Tag: AM-LT
	acconfig.h 
Log Message:

Apparently, acconfig.h has not been added in last commit.  Doing it now.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv1641

Modified Files:
      Tag: AM-LT
	configure.in 
Log Message:

Added AM_PRG_CC_STDC, for much magic about guessing the compiler
options necessary for having a ANSI C compiler.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv8794

Modified Files:
      Tag: AM-LT
	acconfig.h configure.in 
Log Message:

I am slowly starting to port the bulk of cf/{configure,sysloc,sysconf}.in 
to the configure.in file of the AM-LT branch.  This small checkin just
integrates checks for some header files, functions and typedefs.
There is still a lot of things to do.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv32277

Modified Files:
      Tag: AM-LT
	bootstrap.sh 
Log Message:
Dummy commit.  Test if the dncvspipe trick works.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv1808

Modified Files:
      Tag: AM-LT
	bootstrap.sh 
Log Message:
Another dummy commit.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv3833

Modified Files:
      Tag: AM-LT
	bootstrap.sh 
Log Message:
Third dummy commit today.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv6148

Modified Files:
      Tag: AM-LT
	bootstrap.sh 
Log Message:
Fourth (and hopefully last) dummy commit.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv20451

Added Files:
      Tag: AM-LT
	acinclude.m4 
Log Message:

The acinclude.m4 file is a verbatim copy of the old cf/aclocal.m4.
Automake includes the contents of this file when generating
aclocal.m4.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv20629

Modified Files:
      Tag: AM-LT
	Makefile.am configure.in 
Log Message:

Initial (working) C++ binding support with automake/libtool.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv28303

Modified Files:
      Tag: AM-LT
	configure.in 
Log Message:

Added support for F77 bindings build & install on branch AM-LT.
Optional compilation is available through option --enable-f77.
Availability of the m4 preprocessor program is checked using
AC_CHECK_PROGS (this is not done in the MAIN trunk, but it should).
Checking for a f77 compiler (AC_PROG_F77) is done conditioned to
$enable_f77 = yes.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv3668

Modified Files:
      Tag: AM-LT
	configure.in 
Log Message:

Added support for generation of libraries with tagged name in case of
use of PL_DOUBLE.  The trick is done using Automake conditionals
(with_double) and has been implemented for libplplot, libplcxx, and
libplf77.  The definition of the library version number (a la Libtool)
is done now in configure.in (look at variable SOVERSION) and is
AC_SUBSTituted.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv14112

Modified Files:
      Tag: AM-LT
	Makefile.am acconfig.h configure.in 
Log Message:

This is a preliminary (albeit working) implementation of the selective
building of drivers for inclusion in libplplot.  A convenience library
(libpldrv.la) is built in the drivers directory and libplplot is
linked against it.  Drivers are selected using --enable-<driver>
options to configure, like in the current configuration scheme.  An
AC_SUBSTituted variable called DRIVERS contains the names of the *.lo
objects, on which libpldrv depends.

This implementation has still one problem, namely the fact that the
PL_DRIVERS_LIST variable in configure.in contains a list of the files
in the drivers directory, not the actual drivers, like in the current
configuration scheme.  For instance, "gd" appears in PL_DRIVERS_LIST
and PLD_gd gets defined in plDevs.h.  However, drivers/gd.c needs the
definition of PLD_jpeg and PLD_png.  I will work out a solution for
this problem as soon as possible.

For now, I can include some "easy" drivers in libplplotd, like ps and
xfig.  This is already a big step forward.

There are some miscellaneous changes going with this commit, like the
proper definition of M4_FLAGS (with -DDOUBLE, that was missing) and
the definition "CLEANFILES = sfstubs.f" in bindings/f77/Makefile.am.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv6754

Modified Files:
      Tag: AM-LT
	configure.in 
Log Message:

This commit contains experimental (albeit working) code for building
and intalling xwin.c as module that can be dlopen'ed.  Of course, this
does not work without the code in the dyndrv branch and the whole
system has to be changed to allow configuration of all drivers.
Nevertheless, I am saving this into CVS before my computer dies and I
loose this work.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv18163

Modified Files:
      Tag: AM-LT
	configure.in 
Log Message:

Added Marice LeBrun's user configurability code (via cf_plplot.in
file).  Also, the configure script will output some results of the
configuration process, like in the good old days.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv21200

Added Files:
      Tag: AM-LT
	COPYING COPYRIGHTS Changes Changes.log Changes.old 
	Installation README.1st README.local aclocal.m4 fixes pltar 
	pltar.cmd pltar1 pltar2 pltgz plzip plzip.cmd plzoo plzoo.cmd 
	plzoo2 problems zooup 
Log Message:
First merge against MAIN

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv2878

Modified Files:
	CHANGES FAQ INSTALL NEWS PROBLEMS README 
Log Message:
Update to current 5.1.0 state.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv8957

Modified Files:
	INSTALL 
Log Message:
Warn about Gnu make and tweak other parts of this documentation.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv8889

Modified Files:
	README 
Log Message:
Rework credits and supported systems and front-ends to reflect the current
situation.  Also, many tweaks.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv25815

Modified Files:
	Makefile 
Log Message:
Fixed a nit with configure build command.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv16469

Modified Files:
	PROBLEMS 
Log Message:
As requested on the list.  Please update this file has you solve problems,
tackle new features, etc.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv659

Modified Files:
	PROBLEMS 
Log Message:
Tweak wording.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv29075

Modified Files:
	PROBLEMS 
Log Message:
I (AWI) can no longer replicate the problems I was having before with the
plframe cmap1 palette manipulation GUI so I am removing it from the PROBLEMS
list.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv25773

Modified Files:
	PROBLEMS 
Log Message:
Mentioned maintenance of fortran interface that needs doing.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv4693

Modified Files:
	PROBLEMS 
Log Message:
Add update website to essential, minor category with reference to
http://www.fe.up.pt/~jcard/plplot-www/index.html where Joao is currently
experimenting with some changes.

Update of /cvsroot/plplot/plplot
In directory usw-pr-cvs1:/tmp/cvs-serv8399

Modified Files:
	PROBLEMS 
Log Message:
Note on required plplot-config fix to deal with additional libraries we
build.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv3146

Modified Files:
      Tag: AT
	.cvsignore 
Added Files:
      Tag: AT
	AUTHORS COPYING ChangeLog Makefile.am TODO.AM-LT acconfig.h 
	acinclude.m4 bootstrap.sh configure.in 
Removed Files:
      Tag: AT
	Makefile 
Log Message:
Initial commit of AT branch.  Details of how this was created will be posted
to plplot_devel

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv11001

Modified Files:
      Tag: AT
	.cvsignore ChangeLog Makefile.am acconfig.h configure.in 
Log Message:
AT changes to make xwin and ps dynamic drivers work on Linux.  Here are some
details for the various files:

	* .cvsignore files: convenience changes.
	* Makefile.am: reorder src first, then drivers (since dynamic 
	drivers depend on src).  Will take care of static drivers later.
	* acconfig.h: ENABLE_DYNDRIVERS DRIVERS_DB, and switch the old
	drivers list to a new complete devices list.
	* configure.in: incorporate HEAD static and dynamic driver handling
	from old cf/configure.in. Changed DATA_DIR back to current standard
	ENABLE_DYNDRIVERS, DRIVERS_DB. Current standard for dynamic driver
	names.
	* drivers/Makefile.am: Current static drivers don't work, but
	added working versions of xwin and ps dynamic drivers.
	* drivers/ps.c: PLPLOT_VERSION ==> VERSION
	* examples/c/*.c examples/c/*.h: change to old include style without
	the "plplot/".
	* src/Makefile.am: completed list of files to include in libplplot;
	hacked in -lm -ldl -lfreetype (freetype should be option); and
	disabled use of convenience library for static drivers (to be
	revisited later).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv12438

Removed Files:
      Tag: AT
	COPYING 
Log Message:
Change this text to LGPL text which is appropriate for PLplot

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv12835

Added Files:
      Tag: AT
	COPYING 
Log Message:
remove and add cycle to change to LGPL version of license (which is the
appropriate one for PLplot).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv14038

Modified Files:
      Tag: AT
	ChangeLog configure.in 
Log Message:
As agreed with Rafael change from GPL to LGPL for his contributions to AM-LT
to be consistent with most of the rest of PLplot.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv12300

Modified Files:
      Tag: AT
	.cvsignore Makefile.am acconfig.h configure.in 
Log Message:
	* with_freetype automake conditional
	* partial preparation for libltdl change

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv18254

Added Files:
      Tag: AT
	sysloc.in 
Log Message:
Initial commit of this file (a copy of cf/sysloc.in) in the top-level
directory.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv19556

Modified Files:
      Tag: AT
	sysloc.in 
Log Message:
Rip out a lot of OS dependent stuff that should not be needed for AT approach.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv19911

Modified Files:
      Tag: AT
	ChangeLog configure.in 
Log Message:
Finally found a reasonable solution for configuring freetype using
FREETYPEINCCMD and FREETYPELIBCMD.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv29155

Modified Files:
      Tag: AT
	ChangeLog 
Log Message:
Add plConfig.h to installed headers.  This allows examples to compile
properly for the first time.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv28484

Modified Files:
      Tag: AT
	bootstrap.sh 
Log Message:
Add libtoolize line for libltdl support

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv15464

Modified Files:
      Tag: AT
	ChangeLog 
Log Message:
Finish change from dlopen style of API to cross-platform libltdl.

	* Remove aclocal.m4 from cvs control (was stale cvs deleted file which
	  is automatically generated in any case with an up-to-date version
	  using ./bootstrap.sh).
	* Makefile.am files: add support for libltdl.
	* include/disptab.h: New PLDispatchInit typedef consistent with lt_ptr.
	* include/plcore.h: Change dlhand type.
	* src/plcore.c: Switch from dlopen API to libltdl API (a fair number
	  of changes because of new types for dlopen and dlsym equivalents,
	  and need for lt_dlinit() and lt_dlexit() calls which I chose to
	  make for each stream created and destroyed.)

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv9095

Modified Files:
      Tag: AT
	ChangeLog 
Log Message:
Changes to make "make dist" include every file that is required.
        * Makefile.am files: some reorganization, but mostly adding
	  EXTRA_DIST macros so the distributed tarball generated by
	  make dist has everything it needs.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv25701

Modified Files:
      Tag: AT
	ChangeLog configure.in 
Log Message:
configure.in and /bindings/f77/Makefile.am: Cross-platform glitches fixed
for solaris.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv22674

Modified Files:
      Tag: AT
	ChangeLog Makefile.am configure.in 
Log Message:
Added support for examples/c examples/c++ and examples/f77.  To keep rules
simple copied fmacs.m4 from bindings/f77 to examples/f77.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv3707

Modified Files:
      Tag: AT
	ChangeLog Makefile.am configure.in 
Log Message:
Support for generating Makefile.examples in each of the examples directories
plus added Makefile.examples.in files in c c++ and f77.  Only the
c version has been tested so far, and I expect further changes will be
required in c++/Makefile.examples.in and f77/Makefile.examples.in.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv22022

Modified Files:
      Tag: AT
	.cvsignore ChangeLog 
Log Message:
Changes so that the c++ example can be built with make -f Makefile.examples.

Also .cvsignore changes and additions for convenience.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv18176

Modified Files:
      Tag: AT
	ChangeLog 
Log Message:
Make examples/f77 builds work using make -f Makefile.examples.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv25538

Modified Files:
      Tag: AT
	ChangeLog configure.in 
Log Message:
Made python front end work on the AT branch.

* Creation of python extension modules now works.  Replaced the setup.py
method (which had some cross-platform question marks) with a libtools
method.
			    
* Fixed build of xwin_drv.so so it links to libplplot.  Without this the
python examples won't work with the xwin driver.
	          
* Install of python examples including new plplot_python_start.py which is
configured to make accessible to python the directory which contains the
installed plplot python extensions (assuming that might not be in the
standard system location).

* Fixed single precision bugs in bindings/c++/Makefile.am
bindings/f77/Makefile.am.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv375

Modified Files:
      Tag: AT
	ChangeLog configure.in 
Log Message:
Drop configuration of bindings/python/setup.py since this method is now
abandoned.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv20216

Modified Files:
      Tag: AT
	ChangeLog Makefile.am configure.in 
Log Message:
AT build of libplplottcl and the utilities plrender, pltek, and pltcl.
(The last of these links to libplplottcl).  

The installed pltcl is able to execute up to the point where it cannot find
plplot tcl resources which are not yet part of the AT install.  So this
commit is only a partial step toward getting plplot to work under pltcl and
tclsh.

* AT build of libplplottcl (including a substantial reorganization of
configure.in).
		  
* AT build of utilities plrender, pltek, and pltcl.
			  
* AT reorganize src/Makefile.am, but no substantive changes.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv24720

Modified Files:
      Tag: AT
	configure.in 
Log Message:
Finish AT tcl binding.  These are only small fairly non-consequential 
refinements that I did while trying to debug the extended search problem
(which had a simple solution which I will discuss on list).

Prepare the start of the tk and tk-x-plat bindings by dropping "plplot/"
from the #include statements in the source files.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv16166

Modified Files:
      Tag: AT
	ChangeLog configure.in 
Log Message:
Finish AT libplplottcltk.so* build when itcl and tk are enabled.  This has
been tested by linking pltcl (which links to this library), and no undefined
symbols were found in that test.  However, actual functionality tests for
libplplottcltk.so* will come later.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv32719

Modified Files:
      Tag: AT
	acinclude.m4 
Log Message:
Copy cf/aclocal.m4 to this file.  This should help to sort out autoconf 2.5.x
problems found by Joao for AT branch.

Note, Rafael did this copy before for the AM-LT branch, and the result
propagated to the AT branch, but that was an old version of cf/aclocal.m4
which Maurice has since upgraded to make it compatible with autoconf 2.5.x..

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv7776

Modified Files:
      Tag: AT
	ChangeLog configure.in 
Log Message:
Deal with AT conversion of bindings/tk: build and install plserver and
install *.tcl, *.itk, and palette (*.pal) files.  The examples/tcl/tclIndex
stuff is bogus; that file is generated and should (eventually) be removed
from cvs after the merge of AT into MAIN.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv17600

Modified Files:
      Tag: AT
	configure.in 
Log Message:
New $LIBTAG_drv.la suffix on dynamic drivers list elements to be compatible
with libtool.

Reorder some lists into a reasonable order that humans can understand.

Quote some argument lists.  That continues to work on my mixed 2.13-2.53
system, and it should help those with a pure autoconf 2.53 system.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv17109

Modified Files:
      Tag: AT
	configure.in 
Log Message:
Make most dynamic drivers work under AT.  

For example, plmeta now works, and plrender also works fine for the plmeta
file that was created. 

There are still some problem dynamic drivers.  I still need to add the
correct library lines to build gd_drv.so so that the png and jpeg devices
work.  plserver works fine, and so does loading tk_drv.so and running
examples under wish. But -dev tk (which uses the same shared object) does
not work for some reason which I am still tracking down.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv21664

Modified Files:
      Tag: AT
	ChangeLog configure.in 
Log Message:
Finish (nearly) all the dynamic driver builds for AT. Checked that gnome,
png, xfig, ntk all worked.  Also, package require Plplotter (which accesses
the tkwin_drv.so shared object) also works, and -dev tkwin works (although
it simply returns the usual error message about no widget being available
since this is not a stand-alone driver).  As far as I know, the only driver
that still has errors under AT is tk.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv30933

Modified Files:
      Tag: AT
	ChangeLog 
Log Message:
Instead of using the concatanation of all compiler flags for all dynamic
drivers, apply only those compiler flags that are appropriate to each
dynamic driver.  This makes a huge reduction in the command line when gnome
driver flags are involved, and probably saves significant computer time as
well when you avoid searching all those gnome header directories for each
dynamic driver.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv16646

Modified Files:
      Tag: AT
	configure.in 
Log Message:
AT install of examples/tk.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv28306

Modified Files:
      Tag: AT
	ChangeLog Makefile.am configure.in 
Log Message:
Bring test directory under autotools control. Result is that plplot-test.sh
runs in the installed AT examples directory and gives identical results with
the installed MAIN examples directory (except in a few cases where there is
version skew between the examples since AT was branched from MAIN).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv13122

Modified Files:
	.cvsignore COPYING configure.in 
Added Files:
	AUTHORS ChangeLog Makefile.am TODO.AM-LT acconfig.h 
	acinclude.m4 bootstrap.sh sysloc.in 
Removed Files:
	Makefile 
Log Message:
Merged AT branch into MAIN, a new configuration era has started

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv24717

Added Files:
	configure.ac 
Log Message:
This was configure.in from the AT branch.  But that file was in the attic
(i.e., long ago deleted on MAIN) so there was a name clash, and that
file name cannot be used any more.  Fortunately, configure.ac is also
an acceptable name for autoconf to understand, so that is what we will
use from now on.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv25813

Modified Files:
	.cvsignore 
Log Message:
tweak

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv18032

Modified Files:
	ChangeLog configure.ac 
Log Message:
Begin configuration of octave using autotools.  plplot_octave.oct (the
octave wrapper for the plplot library) builds and installs without problems.
However, no other part of octave done (although coming soon) so
plplot_octave.oct not tested yet.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv27353

Modified Files:
	ChangeLog 
Log Message:
Put in Joao's recent gcc 3.2.x fix

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv24395

Modified Files:
	ChangeLog configure.ac 
Log Message:
(mostly) finish configuration of octave using autotools.  Over to Joao now
to sort out why the installed p7.m and p15.m examples don't work and why
none of the x??.m examples work.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv9600

Modified Files:
	ChangeLog Makefile.am 
Log Message:
Clean up Makefile.am files and also switch from LIBADD to LDFLAGS for
interlibrary dependencies as suggested by documentation.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv20035

Modified Files:
	ChangeLog 
Log Message:
Change fortran and C++ driver names to libplplotf77 and libplplotcxx because
of name-clash concerns.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv31807

Modified Files:
	ChangeLog 
Log Message:
Configure test executables in examples for c++, f77, and tk.  make check
builds the uninstalled c, c++, f77, and tk examples fine, and plplot-test.sh
works with these uninstalled examples with some limitations that are
discussed on list.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv9854

Modified Files:
	ChangeLog Makefile.am configure.ac 
Log Message:
Make all static drivers (except for tk and tkwin whose implementation will
be more complicated) work using the automake convenience library approach.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv12618

Modified Files:
	ChangeLog configure.ac 
Log Message:
default enable_tk is changed to yes.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv19133

Modified Files:
	.cvsignore ChangeLog 
Log Message:
Make tk and tkwin static drivers work. This completes the static drivers
configuration.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv19819

Modified Files:
	.cvsignore 
Log Message:
tweaks.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv32290

Modified Files:
	ChangeLog 
Log Message:
Search for Pltk and Plplotter entry points in libplplot if a search in the
dynamic drivers fails. This is required for static drivers since in that
case the entry points (and drivers) are put in libplplot.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv4222

Modified Files:
	ChangeLog PROBLEMS 
Log Message:
Reorganize and update PROBLEMS to set our priorities about what must be
accomplished before the next release.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv11927

Modified Files:
	PROBLEMS 
Log Message:
Yet another set of changes to our PROBLEMS file reflecting  list
traffic in the last month or so.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv7384

Modified Files:
	bootstrap.sh 
Log Message:
Add --copy option to automake so that it will make copies rather than
symlinks.  This should facilitate making tarballs for cross-platform testing.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv26799

Modified Files:
	ChangeLog configure.ac 
Log Message:
Only run AM_PATH_PYTHON(1.5) if python is enabled.  Hopefully, this will solve
Joao's OSF1 problem with python.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv27445

Modified Files:
	ChangeLog 
Log Message:
Change from lt_dlopen to lt_dlopenext for more cross-platform suffix
generality.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv29200

Modified Files:
	ChangeLog sysloc.in 
Log Message:
Sort out configuration problems when tcl disabled.  This has been tested
both with and without dynamic drivers, and hopefully will finally sort
out the OSF1 build problems Joao has encountered.

sysloc.in: has_tcl is now set to enable_tcl.

bindings/Makefile.am: pkgIndex.tcl now only built if tcl enabled.
	
utils/Makefile.am: pltcl now only built if tcl enabled.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv21765

Modified Files:
	ChangeLog 
Log Message:
Comment out premature removal of libltdl resources in plend since plinit may
be called again after a call to plend.  In fact there is no way to guarantee
any particular call to plend is the last so these libltdl resources must
always remain allocated until the overall programme exits.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv26345

Modified Files:
	ChangeLog configure.ac 
Log Message:
xflags and lmflag activated for drivers which need linking to X libraries or
the math library.  Additional AM_CONDITIONALS were done in configure.ac to
help implement this.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv4686

Modified Files:
	ChangeLog 
Log Message:
Tweak install logic for cases where python, tcl, or tk are not enabled.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv29704

Modified Files:
	ChangeLog configure.ac 
Log Message:
Drop ".so" suffix from records in created drivers.db. Apparently, this makes
libtldl work properly on OSF1, and it still also works properly on Linux
with this change.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv8289

Modified Files:
	.cvsignore 
Log Message:
tweak

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv11678

Modified Files:
	sysloc.in 
Log Message:
Use the builtin matwrap when the user has none installed. AT merge change of directories.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv31905

Modified Files:
	acconfig.h configure.ac 
Log Message:
Check the existence of isinf() and finite(). At least OSF1 does not seems to have isinf().
This is needed for the c example x08c.c. Not mandatory, however, look at the comment in x08c.c:

/*
 Note that isinf() is not needed with the standard XPTS, YPTS
 and x and y minimum and maximum values, but if the user changes
 any of these, then we can get the log of a negative number.
*/

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv19373

Modified Files:
	sysloc.in 
Log Message:
Strip directory from mkoctfile and octave in case user specify it.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv7886

Modified Files:
	ChangeLog PROBLEMS 
Log Message:
Document octave example problems now fixed.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv14258

Modified Files:
	configure.ac 
Log Message:
Default tkwin is set to yes.  

Prepare, but comment out for now (until Vince checks out this fix) a
possible cygwin fix.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv5643

Modified Files:
	ChangeLog configure.ac 
Log Message:
Implement autotools support for building and installing java plplot wrapper
library, libplplotjava, java/plplot/core classes, and installing java source
for examples in java/plplot/examples.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv6233

Modified Files:
	ChangeLog 
Log Message:
tweak

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv1458

Modified Files:
	PROBLEMS 
Log Message:
Document some configuration issues with --disable-shared that need to
be addressed.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv5646

Modified Files:
	sysloc.in 
Log Message:
Correct typo that allows 'configure' to use a specific Octave version.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv6265

Modified Files:
	sysloc.in 
Log Message:
Check for tcl/tk-8.4 and itcl/itk-3.3. Suse-8.1 are shipped with those.
"itk" is not detected, however.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv24843

Modified Files:
	configure.ac 
Log Message:
Eliminated space after all -L options as libtool evidently doesn't like
these, and switched to a uniform "stringified" way of writing this whole
section.  Looks good in font-lock mode..

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv12149

Modified Files:
	AUTHORS 
Log Message:
Update this list to coincide with our sourceforge developers

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv15364

Modified Files:
	README 
Log Message:
Refer to the AUTHORS file for credits.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv23310

Modified Files:
	Makefile.am 
Log Message:
Configure installation of some overall documentation files.  

Compared to old configuration dropped the following files:

CHANGES ToDo (too outdated and superseded by ChangeLog and PROBLEMS)
README.local (empty)
mklinks (not relevant?).  Maurice, please stick this in if relevant.

Compared to old configuration added the following files:

AUTHORS (up to date list of the PLplot core team)

COPYING (GPL is relevant to octave)

ChangeLog (Account of our non-trivial changes which I have been updating
since the start of the AM project.  The rest of you, please add your bit to
this file when you make a non-trivial commit).

PROBLEMS (For now this has every PLplot problem where there are plans of
some sort to get it straightened out.  This file could complement the ToDo
file where more grand plans for the distant future of PLplot could be
discussed.)

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv26641

Modified Files:
	Copyright 
Log Message:
Mention octave front end license is GPL.

Alan W. Irwin writes:
 > mklinks (not relevant?).  Maurice, please stick this in if relevant.

mklinks was a good idea at the time but these days a better solution
is available.  Basically mklinks let you put plplot under
/usr/local/plplot-version and then make symlinks into /usr/local/bin, lib,
man, and so on.  And most importantly, later remove them.

These days it's more common to provide a package manifest and an uninstall
facility.  Of course that is part of rpm's appeal, but anyone can do it.
Now that we're using the install command (/usr/bin/install on my system)
to do the install (which has become quite noisy again BTW), we can wrap
that with a script that generates the manifest.  Given the manifest, an
uninstall utility is trivial.

-- 
Maurice LeBrun    mjl@...
Research Organization for Information Science and Technology of Japan (RIST)

On Sun, 22 Dec 2002, Maurice LeBrun wrote:

> These days it's more common to provide a package manifest and an uninstall
> facility.

"make uninstall" may provide this facility with the current configuration
scheme.  But I haven't tried it to make sure it actually removes everything.

Alan

email: irwin@...
phone: 250-727-2902	FAX: 250-721-7715
snail-mail:
Dr. Alan W. Irwin
Department of Physics and Astronomy,
University of Victoria, P.O. Box 3055,
Victoria, British Columbia, Canada, V8W 3P6
__________________________

Linux-powered astrophysics
__________________________

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv4775

Modified Files:
	configure.ac 
Log Message:
Fixes to get definitions for CPP (via plConfig.h) correct -- AM_CONFIG_HEADER
must be called *before* AC_DEFINE's that are to go into the headers.  Solves
the infamous -dev tk problem.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv9221

Modified Files:
	acconfig.h 
Log Message:
Put trailing include guard at the end of the file where it belongs.. yikes!

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv14553

Modified Files:
	PROBLEMS ChangeLog 
Log Message:
tweak

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv29566

Modified Files:
	configure.ac 
Log Message:
Set plplot_config_invocation so that the config summary at the end contains
the command used for configuration, also create reconfig script as a
convenience (good when long configure lines are used).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv30033

Modified Files:
	Makefile.am 
Log Message:
Added reconfig to CLEANFILES.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv10192

Modified Files:
	configure.ac 
Log Message:
Add support for KAI C++ (vendor C++ compiler).  Also remove config summary
output for LDC, LDCXX, LDF77, since these are no longer being used.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv6759

Modified Files:
	acconfig.h configure.ac 
Log Message:
See if the system has usleep(), needed by the x01c.c C demo when the -xor cmd line option is used.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv26199

Modified Files:
	ChangeLog 
Log Message:
Use CC, CXX, and F77 symbols rather than hard-coded compiler names.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv15792

Modified Files:
	ChangeLog 
Log Message:
*/Makefile.examples.in: clean target

*/Makefile.am: implement install of Makefile.examples renamed to Makefile for
user convenience.

Alan W. Irwin writes:
 > Update of /cvsroot/plplot/plplot
 > In directory sc8-pr-cvs1:/tmp/cvs-serv15792
 > 
 > Modified Files:
 > 	ChangeLog 
 > Log Message:
 > */Makefile.examples.in: clean target
 > 
 > */Makefile.am: implement install of Makefile.examples renamed to Makefile for
 > user convenience.

Are you updating this by hand?  I noticed a change of mine in there and *I*
didn't put it in, so I'm wondering what's going on.

-- 
Maurice LeBrun    mjl@...
Research Organization for Information Science and Technology of Japan (RIST)

On Tue, 24 Dec 2002, Maurice LeBrun wrote:

> Are you updating this by hand?  I noticed a change of mine in there and *I*
> didn't put it in, so I'm wondering what's going on.

Yes.  I put in some entries into ChangeLog (the filename is recommended by
info automake) for you and Joao to make clear this is not just "my" file. I
encourage both of you to delete or change your entry any way you like, and
of course more entries from you and the rest of the PLplot developers when
you make an important change in the future would be most appreciated.

Alan

email: irwin@...
phone: 250-727-2902	FAX: 250-721-7715
snail-mail:
Dr. Alan W. Irwin
Department of Physics and Astronomy,
University of Victoria, P.O. Box 3055,
Victoria, British Columbia, Canada, V8W 3P6
__________________________

Linux-powered astrophysics
__________________________

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv4549

Modified Files:
	ChangeLog 
Log Message:
My changes so far today.  My, Changelog + font-lock mode looks nice.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv2725

Modified Files:
	ChangeLog 
Log Message:
Some other changes I did yesterday.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv17220

Modified Files:
	configure.ac 
Log Message:
Moved AC_PROG_CXX outside the enable_cxx conditional as a workaround to
problem discovered with latest versions of auto{make,conf} (1.7 & 2.57).
So now we always check for the presence of a C++ compiler although we
may not be using that info.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv18227

Modified Files:
	Makefile.am 
Log Message:
Goodbye to COPYING.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv21868

Modified Files:
	configure.ac Makefile.am 
Added Files:
	plplot-double.pc.in plplot.pc.in 
Log Message:
Add pkgconfig macros

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv29496

Modified Files:
	ChangeLog 
Log Message:
Implement new swig-based Java API.  Two-dimensional arrays are not
implemented yet which means 6 of the examples do not work, but the rest do
work, and in fact example 18 works completely for the first time ever
because all PLplot functions in the common API that have variable or
one-dimensional array arguments have been completely implemented in Java.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv17744

Modified Files:
	.cvsignore 
Log Message:
Tweak

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv31181

Modified Files:
	ChangeLog 
Log Message:
Implement the simpler 2-d arrays for the swig-based Java API.  This means
all examples now work other than x09 (contours), x15 (shade plots with
plshade), and x16 (shade plots with plshades).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv2623

Modified Files:
	ChangeLog 
Log Message:
Implement additional 2-d arrays for the swig-based Java API. These new
typemaps allow plcont (and x09.java) to work.  Note, only the 2-d version is
implemented, there is no angle wrap code, and kx, lx, ky, ly always have to
be in the argument list.  In other words this is the raw java interface to
PLplot.  Thus, a number of adjustments had to be made to x09.java to work
with this raw interface.  However, once the user-friendly interface is done,
it should be possible to overload 1-d arrays when needed for xg0 through
yg1, have angle wrap code, and also drop kx, lx, ky, ly.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv17675

Modified Files:
	ChangeLog 
Log Message:
Implement typemaps for defined_func and fill_func which allow x15.java and
x16.java to work properly.  Note, I removed the local versions of plshades
from x16.java since plshades is now defined in the PLplot java interface
API.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv19316

Modified Files:
	ChangeLog 
Log Message:
Note on app-defaults files.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv22114

Modified Files:
	ChangeLog 
Log Message:
Implement plParseOpts for new Java interface and change all examples to use
it again.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv3953

Modified Files:
	ChangeLog PROBLEMS 
Log Message:
Finished Java swig-based interface to Plplot for now.  Current limitations
are detailed in bindings/java/README.javaAPI.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv3658

Modified Files:
	ChangeLog PROBLEMS 
Log Message:
Made the appropriate python interface changes so we are now uniformly based
on swig version 1.3.17 for both our java and python interfaces!  The
required changes turned out to be minimal, but absolutely necessary because
of a paradigm shift that occurred in the swig approach for earlier versions
of the unstable swig 1.3.x series.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv6996

Modified Files:
	ChangeLog PROBLEMS configure.ac sysloc.in 
Log Message:
Changed version number of PLplot package *and* associated libraries to 5.2.0
in anticipation of the forthcoming release.  To get this to work properly
must have a fresh checkout or else run 'make distclean' before trying this
change.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv23363

Modified Files:
	ChangeLog 
Log Message:
plplot-test.sh.in test_java.sh : Added the java examples to our test
procedure which builds all of our non-interactive example plots.  Also
tweaked most of the remaining scripts in test.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv21509

Modified Files:
	ChangeLog 
Log Message:
Make 8th Java example give the same result (to 1 unit in last digit of
postscript file) as new 8th C example.  This involved defining some
additional constants for the swig java interface file as well as substantial
changes in x08.java.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv6009

Modified Files:
	ChangeLog 
Log Message:
Make changes in 11th java example that make it exactly consistent with newly
changed C example.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv21743

Removed Files:
	COPYING 
Log Message:
Attempt to fix state information on zombied files (those in attic with
state exp rather than state dead).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv22887

Removed Files:
	COPYRIGHTS Changes Changes.log Changes.old Installation 
	README.1st README.local aclocal.m4 
Log Message:
Attempt to fix state information on zombied files (those in attic with
state exp rather than state dead).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv27768

Removed Files:
	configure.in 
Log Message:
Attempt to fix state information on zombied files (those in attic with
state exp rather than state dead).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv30038

Removed Files:
	fixes pltar pltar.cmd pltar1 pltar2 pltgz plzip plzip.cmd 
	plzoo plzoo.cmd plzoo2 problems 
Log Message:
Attempt to fix state information on zombied files (those in attic with
state exp rather than state dead).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv10049

Removed Files:
	zooup 
Log Message:
Attempt to fix state information on zombied files (those in attic with
state exp rather than state dead).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv10482

Modified Files:
	ChangeLog 
Log Message:
Make 9th and 11th Python example consistent with recently changed C
examples.  This concludes the Python consistency effort (at least until the
next change in the C examples).  All python and java examples now agree
exactly in their results.  The long-standing discrepancy in the last page of
example 9 between the C example and now both the java and python examples
persists both for single and double precision libplplot (and C example 9).
So this suggests there may be some precision problem with the C example 9,
but I cannot find it!

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv14834

Modified Files:
	ChangeLog 
Log Message:
Make 8th, 9th and 11th Tcl examples consistent with recently changed C
examples.  This concludes the Tcl consistency effort (at least until the
next change in the C examples). 

All python and java examples now agree exactly in their results, and tcl
examples agree quite closely also with java and python.  The long-standing
discrepancy in the last page of example 9 between the C example and now all
of the java, python, and tcl examples persists both for single and double
precision libplplot (and C example 9). So this suggests there may be some
problem with the C example 9, but I cannot find it!

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv16332

Modified Files:
	PROBLEMS 
Log Message:
Revise and update this file consistent with the recent zombie file solution 
and java, python, and tcl consistency work.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv26757

Modified Files:
	sysloc.in 
Log Message:
Wrap setting of PYTHON_INSTDIR in a if test -z so that it can be explicitly
set by the user.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv860

Modified Files:
	Makefile.am configure.ac 
Log Message:
Add plm2gif plpr pstex2eps scripts installation

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv2155

Modified Files:
	ChangeLog PROBLEMS 
Log Message:
Tweaks for last minute stuff before release

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv2686

Modified Files:
	configure.ac 
Log Message:
Remove include/plDevs.h from autoheader control and put it under autoconf
control as discussed on list as a possible solution to the problems
that Joao found with the plplot-5.2.0 tarball).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv19741

Modified Files:
	configure.ac 
Log Message:
Revert back to previous version.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv8313

Modified Files:
	configure.ac sysloc.in 
Log Message:
Simplified python configuration.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv4089

Modified Files:
	bootstrap.sh configure.ac sysloc.in 
Removed Files:
	acconfig.h 
Log Message:
Rafael's patch to improve our autotools configuration after some bad
experiences with plplot-5.2.0.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv1151

Modified Files:
	configure.ac 
Log Message:
AUTOHEADER="echo autoheader ignored" fix put in as well as moving
AC_CONFIG_HEADERS right after AC_INIT as the documentation says to do.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv10201

Modified Files:
	bootstrap.sh 
Log Message:
Make sure you start with zero-length config.h.in file each time ./bootstrap.sh
is invoked.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv27181

Modified Files:
	bootstrap.sh 
Log Message:
Inverted order of autoheader and automake invocations.  This makes the
script work in a freshly checkout CVS tree.  Also, this eliminates the need
for the "touch config.h.in" command, which has been removed.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv30354

Modified Files:
	configure.ac 
Log Message:
Removed the assignement of the AUTOHEADER variable to the dummy echo
command.  Autoheader will be invoked in the Makefile whenever configure.ac
is newer than include/plDev.h.in and/or include/plConfig.h.in.  Now that all
the AC_DEFINE macros have been fixed in configure.ac, the invocation of
autoheader will always succeed.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv13818

Modified Files:
	sysloc.in 
Log Message:
swig version checks suggested by Rafael

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv4525

Modified Files:
	configure.ac sysloc.in 
Log Message:
Some improvements in the swig checks:

1) Versions 1.3.x, x >= 17 are accepted, not only exactly the version 1.3.17.

2) Some stylistic changes like the use of "test" instead of "[".  Also, I do
   not think that echoing the version numbers is useful, since it clutters
   the normal output of the configure script(that is pretty non-standard).
   I commented that. 
   
3) I added AC_MSG_WARN to tell the the user that the available swig is too
   old.  However, in order to not show spurious warning messages to the
   regular user, the AC_MSG_WARN is only run when we are in "maintainer
   mode".  For that to work, I added AM_MAINTAINER_MODE to configure.ac.
   This macro is almost harmless and one of the effects is to define a
   configure option --enable-maintainer-mode.  If you use it, then you will
   see the swig version warning if your swig is older than 1.3.17.  
   
I hope that the introduction of AM_MAINTAINER_MODE will not introduce
undesirable side-effects in the Makefiles.  If that happens or if you
dislike this idea, plese revert to the previous situation.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv17040

Modified Files:
	bootstrap.sh 
Log Message:
Issue messages at stdout about which program is launched, including version
information.  This is accomplished through the defined shell function "run".
Since this apparently does not work with vanilla Bourne shells, I made this
script run /bin/bash.  This is a mild constraint, since the developers that
are going to use the GNU AutoTools, almost certainly have GNU bash installed
in their systems.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv27766

Modified Files:
	configure.ac 
Log Message:
Drop $LIB_TAG from STATIC_DRIVERS list.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv17791

Modified Files:
	sysloc.in 
Log Message:
Remove unneeded cruft from sysloc.in.  This is a substantial (28 per cent)
reduction in the size of this large file.  The result has been tested with
essentially all drivers both for the dynamic driver and static driver case.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv23902

Modified Files:
	ChangeLog 
Log Message:
Tweak

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv498

Modified Files:
	configure.ac 
Log Message:
$LIB_TAG is no more added to the filenames of drivers objects
<driver>_drv.so.  Instead, only the drivers directory gets its name changed
($LIB_DIR/$DATA_DIR/../drivers$LIB_TAG/).  To make things even more
maintainable and robust, a new AC_SUBST variable has been created in
configure.ac: DRV_DIR.  It is used in src/plcore.c instead of the hard-code
string "../drivers".

Of course, this changes does not preclude simultaneous installation of both
single and double precision version of PLplot (although I wonder who on
earth besides Maurice needs that!)

Besides being totally transparent to both users and developers, this changes
has a beneficial side effect: it reduces the complexity of the build scheme
of driver objects and drivers/Makefile.am becomes 20% smaller.

This change has been quickly tested in all the combinations of with- vs.
without-double and enable- vs. disable-dyndrivers.  More extensive tests
need to be done, though.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv3069

Modified Files:
	PROBLEMS 
Log Message:
Tweak to reflect recent changes.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv20758

Modified Files:
	configure.ac 
Log Message:
Removed the unnecessary "_drv" suffix that was added to the filenames of the
driver objects.  I wonder why that has been introduced at the firtst place...

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv30070

Modified Files:
	configure.ac 
Log Message:
Change the way the information about the devices provided by the dyndrivers
are obtained.  Instead of using the cache file drivers.db, the information
is provided by the modules themselves.

Extensive information about this change will be sent to plplot-devel
shortly.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv16366

Modified Files:
	configure.ac 
Log Message:
Cleaned up the ps vs. pstex driver mess.  When dyndrivers are enabled, the 
use of --enable-pstex imply now the inclusion of the ps.so driver module, 
enabling the ps and psc devices.

On the other hand, when --enable-ps and --diasable-pstex are specified, the
pstex.so driver module is not erroneously installed, as it used to be.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv14155

Modified Files:
	bootstrap.sh 
Log Message:
This changes were necessary for me to get Libtool 1.4.3 working properly
with Autoconf 2.57 and Automake 1.7.2.  Apparently, something changed
between the version 1.4.2a and 1.4.3 of Libtool such that its aclocal.m4
does get not installed at all.  This is why the option -I is given to
aclocal now.

If launching simply "./bootstrap.sh" does not work for you, please give it
the arguments:

    ./bootstrap.sh -I <libltdl_inc_dir>
    
where <libltdl_inc_dir> is the location where the Libtool's aclocal.m4 is
found (it defaults to "/usr/share/libtool/libltdl").  In regular Linux
installations (like Debian) there is no need to specify arguments to
bootstrap.sh.  This is particularly necessary if you have built and
installed Libtool by hand.

I also made other two changes in order to get things working: option
--force-missing has been added to the automake call and the order of
invocation of automake and libtoolize are reversed.

The addition of the argument to bootstrap.sh needs to be documented.  I will
do that when I will have some more time.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv6484

Modified Files:
	bootstrap.sh 
Log Message:
Using $* instead of $1 for initializing the aclocal_opts variable.  Now, the
command

    ./bootstrap.sh -I <some_dir>
    
works as I announced it first (i.e. there is no need for quoting the
arguments).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv21952

Modified Files:
	PROBLEMS 
Log Message:
Known CVS permission problems have been fixed by Rafael.  Adjust
make_tarball.sh accordingly.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv30113

Modified Files:
	Makefile.am configure.ac 
Log Message:
This commit regards two unrelated changes that are intertwisted in
Makefile.am.  I will report them separately below, such that reversal of
changes will be easier:

1) Put the doc/ directory under AT control.  This was done by, first, adding
   doc/Makefile to the repository (currently, only the man pages present in
   doc/ are installed); second, by adding doc/Makefile to the list of
   AC_OUTPUT files in configure.ac; and, third, by adding doc to the list of
   SUBDIRS in Makefile.am.
   
2) Changed the order of directories in SUBDIRS, by putting "drivers" after
   "bindings".  This is _very_ important, because the old oreder triggers an
   error in the very specific situation: (a) the option --prefix=/usr is
   given to configure and (b) an old version of the PLplot package is
   already installed under /usr (this happened when I tried to build the
   Debian packages).

There is also another change in Makefile.am: instead of having the list of
directories duplicated in the enable_dyndrivers conditional, only the
DRIVERSDIR variable is set and then used later when setting the value of the
SUBDIRS variable. This is a cosmetic change, I know, but let us follow
William of Occam's maxim: "Pluralitas non est ponenda sine neccesitate".

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv18900

Modified Files:
	Makefile.am 
Log Message:
Corrected ordering of directories.  The previous version was screwed up.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv17001

Modified Files:
	configure.ac 
Log Message:
This is a first try in integrating the DocBook source configuration into the
main configuration scheme.  I did not yet try to actually build the
documentation, but at least bootstrap.sh and configure work.

There is now a configure option --enable-docbook, which is set to "no" by
default.  If it is set to "yes", then the checks in doc/docbook/configure
are realized and the files under doc/docbook are AC_SUBSTituted.

The final goal of this effort will be to integrate the building of the docs
into the main build and set up things such that all the generated files get
included into the tarball with "make dist" (when that will happen,
make_tarball.sh will be rm -f and we will make a big celebration :-).

Alan, if you are hearing to this, please test when you can.  I am almost
sure it won't work perfectly, but I will try to be responsive on the bug
reports.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv20732

Modified Files:
	.cvsignore configure.ac 
Log Message:
Changes to make docbook build work (except for final tarball build involving
make dest):

configure.ac: drop conditional AC_OUTPUT of configurable docbook files.
(Otherwise, makes standard make targets like 'make clean' fail.)
Define AM_CONDITIONAL for enable_docbook

doc/docbook/Makefile.am and doc/docbook/src/Makefile.am: use enable_docbook
AM_CONDITIONAL to skip documentation generation if not enabled by
configuration.  Also, drop redundant definitions which were causing
warnings.

doc/docbook/src/Makefile.am: replace $(PACKAGE) by plplotdoc

The build goes through until the very end when the following error message
is generated:

make[5]: *** No rule to make target dist'.  Stop.

This is generated by the rule

$(BASE).tar.gz: dist-stamp
dist-stamp:
        $(MAKE) dist
	touch dist-stamp

but I don't know how to fix that.  Over to you, Rafael....;-)

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv15508

Modified Files:
	bootstrap.sh 
Log Message:
Drop --force-missing as an option to the run automake command.  It was
incorrectly overwriting the PLplot INSTALL file which is under cvs control
with the generic, boring FSF INSTALL file.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv24906

Modified Files:
	configure.ac 
Log Message:
Fixing the version information in AM_INIT_AUTOMAKE, which was screwed up in
my last cvs commit.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv6975

Modified Files:
	configure.ac 
Log Message:
Since the advent of the Autotools configuration scheme, the replacement of
the string PLPLOT_OCTAVE_DIR in file plplot_octave_path.m is not done
anymore.  The necessary code to do it was in cf/pkg_octave.in, which was
included in one of the old Octave bindings Makefile.

The simplest way that I found to circumvent this problem is to take
advantage of the AC_SUBST mechanism of Autoconf.  Therefore, I cvs removed
the plplot_octave_path.m file and added plplot_octave_path.m.in, which
contains the string @OCTAVE_DIR@ that gets replaced when AC_OUTPUT is
called.

Joao, if you are hearing to this and disagree with my changes, please
manifest yourself.  Without this change, or something functionally
equivalent, the Octave bindings are unusable.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv15378

Modified Files:
	sysloc.in 
Log Message:
The variable OCTAVE_DIR is now set correctly, usign "${prefix}" instead of
"$(PREFIX)".   The AC_SUBSTitution in plplot_octave_path.m works fine now.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv32153

Modified Files:
	sysloc.in 
Log Message:
Made the Octave installation more sane.  This included several changes:

* use_plplot.m and and plplot_octave_path.m get installed in a directory
  belonging to the default Octave path.  This is very important, otherwise
  the users will not be able to issue the command "use_plplot"out of the box.

* For that, I used the technique of calling octave_config_info and checking
  the field localfcnfiledir in sysloc.in.

* The other files m files are installed, as usual in
  ${prefix}/share/plplot_octave.  The .oct file is isntalled in Octave
  binary the version-specific directory.
  
* There are now three AC_SUBSTituted variabels that get propagted in the
  Makefile.am's
  
      PLPLOT_OCTAVE_DIR (for the m fiels)
      OCTAVE_M_DIR (for use_plplot.m and and plplot_octave_path.m)
      OCTAVE_OCT_DIR (for plplot_octave.oct)

* These variables are effectively used in the Makefile.am.  The previous set
  up was completely inconsistent, since the "share/plplot_octave" directory
  was used in may places.  Even worse: it was preceeded by $(datadir).  What
  a mess!
  
* In bindings/octave/PLplot/Makefile.am there are now two different
  installation directories,  one for PLPLOT_OCTAVE_DIR and the other for
  OCTAVE_M_DIR, with the m files being accordingly distributed.

* bindings/octave/PLplot/plplot_octave_path.m.in uses now
  @PLPLOT_OCTAVE_DIR@ in order to get the right isntallation directory.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv9800

Modified Files:
	configure.ac 
Log Message:
This is a first experiment to get the different README (and othe
documentation ) files that are scattered through the source directory tree
into ${datadir}/doc/plplot.

I started by doing the changes for the Octave bindings (please, Joao, check
if this suits you).  The Octave bindings have the following documentation
files: BUGS, FGA, INSTALL, ToDo, USAGE, and README.  They are now installed
in the docdir with the suffix ".octave".  In bindings/octave/Makefile.am,
these files are listed (with the suffix) and there is a simple pattern rule
to "build" the %.octave files form their "sources" %.  These fles are then
installed in $(docdir).  That's simple and elegant, IMHO.

Also, there is now a unique place in configure.ac to define where the doc
files go: the AC_SUBSTituted DOCDIR variable.  This should be propagated to
other Makefile.am's in the source tree.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv15981

Modified Files:
	configure.ac 
Log Message:
Merged the two AC_OUTPUT calls.  This was causing configure to run twice.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv4055

Modified Files:
	sysloc.in 
Log Message:
Improved setting of Octave installation directories, such that all files get
installed under ${prefix}.

The idea is very simple.  First, a new autoconf macro has been defined
(OCTAVE_CONFIG_INFO), which exercises the octave command and print the
appropriate field of the octave_config_info structure.

Second, after running the lines:

        OCTAVE_PREFIX=OCTAVE_CONFIG_INFO(prefix)
        OCTAVE_OCT_DIR=OCTAVE_CONFIG_INFO(octfiledir)
        OCTAVE_M_DIR=OCTAVE_CONFIG_INFO(localfcnfiledir)

the value of OCTAVE_PREFIX (typically "/usr") is stripped from the variables
OCTAVE_OCT_DIR and OCTAVE_M_DIR and replaced by the value given in the
--prefix option.

With this change, Octave files will not get installed in system directories,
only accessible by root.

Joao, does this suits you?

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv18444a

Modified Files:
	configure.ac 
Log Message:
Configure correct version number in pkgIndex.tcl

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv23669

Modified Files:
	configure.ac 
Log Message:
Changes for allowing the use of the Octave bindings with a local version of
the PLplot library.  The previous approach, which used install-exec-local,
was not perfect, since it forced the compilation of plplot_octave.oct twice.

This is how things work now:

* Introduced an option --enable-octave-install-local to configure.  When it
  is given, mkoctfile will be called with LD_RUN pointing to the directory
  .libs in the source tree.  Otherwise, it points to the installation
  directory for libplplot.  This option defaults to "no".
  
* Introduced the Automake conditional octave_install_local, whcih does the
  trick in bindings/octave/Makefile.am

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv9459

Modified Files:
	sysloc.in 
Log Message:
When setting the OCTAVE_OCT_DIR, use "localoctfiledir" instead "octfiledir".
This avoid a versioned directory and does not force the dependency of the
octave-plplot package on a specific version of Octave.  This is a tiny
change that will make a huge difference, since many Debian users could not
install/rebuild my packages.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv19543

Modified Files:
	configure.ac sysloc.in 
Log Message:
Changed the Octave bindings compilation/installation along the lines
discussed privately with Joao and Alan. I think that I found a much cleaner
and more elegant way to fix the problems, but I did not make extensive
checks.  Please, do them if you can.

In detail:

  * Use option --compile when mkoctfile accepts it.  This is implemented
    through a configure test and a AM_CONDITIONAL.  In file
    bindings/octave/Makefile.am, rules are set up such that
    plplot_octave.oct will either depend on plplot_octave.cc or
    plplot_octave.o.  Also, when mkoctfile accepts --compile, there is a a
    rule to build plplot_octave.o from plplot_octave.cc.

  * plplot_oct.oct file is always linked using LD_RUN_PATH pointing to the
    local directory containing libplplot.  That way, there is no need to do
    "make install" in order to test the Octave bindings.  (This was the
    behavior already, before my last changes.)

  * I reverted to the previous technique which uses install-exec-local. At
    install time, the version of plplot_octave.oct linked against $(libdir)
    is generated and installed. However, I improved the implementation,
    avoiding the clumsy approach with the .samename directory.  For that,
    option -o is given to mkoctfile.

I also removed the configure option --enable-octave-install-local which has
been introduced previously.  That was not a good idea.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv11635

Modified Files:
	configure.ac sysloc.in 
Log Message:
Removed AM_MAINTAINER_MODE from configure.ac and also the test on
USE_MAINTAINER_MODE in sysloc.in (swig checks).  I have introduced this, but
just concluded that it is useless and has the bad side effect of preventing
automatic regeneration of the Makefile's when the associated Makefile.am's
are modified.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv4928

Modified Files:
	sysloc.in 
Log Message:
Moved the AM_CONDITIONAL for mkoctfile_accepts_c_flag outside the if/tehn/fi
for enable_octave.  AM_CONDITIONAL's should never be executed conditionally.
This resulted in an error when option --disable-octave was given to
configure.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv28647

Modified Files:
	configure.ac 
Log Message:

Use AC_HELP_STRING whenever AC_ARG_{WITH,ENABLE} is involved.  This is the
right way of doing things in order to have nicely formatted help strings.
With this change, "configure --help" looks okay now.

There is still a glitch: some help strings show "$enable_<var>" instead of
the value of variable enable_<var>, like this:

  --enable-xwin           enable xwin device driver ($enable_xwin)
  
This has nothing to do with the current change and happened also before.  I
think that this is due to a recent change in Autoconf, where a delimiter of
a here-document string is quoted, preventing variable substitution.  My
guess is that there is nothing that we can do to fix that, but I will
investigate later.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv2044

Modified Files:
	configure.ac 
Log Message:

Oops, forgot to commit this file, with the changes needed for the new "mem"
driver.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv29608

Modified Files:
	configure.ac sysloc.in 
Log Message:

This is a revival of the --with-rpath option to configure, which has been
ripped out from sysloc.in when the AT branch has been created.  I need this
to build Lintian clean packages in Debian.

Setting -rpath may be a handy thing for users who do not have root access,
but enforcing it by default is not a Good Thing to do.  In particular,
Debian Policy enforces the non-use of rpath for upgradability reasons.

This changes is transparent and harmless, and the PLplot build will happens
as before, since with_rpath is set to "yes" by default.  Please, do not undo
this change in the future!

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv15534

Modified Files:
	configure.ac 
Log Message:

Use the Automake conditional with_rpath in bindings/octave/Makefile.am to
conditionally include the setting of LD_RUN_PATH when generating
plplot_octave-libdir.oct.  Also, change the rule install-exec-local to
install-exec-hook, such that the installation of plplot_octave-libdir.oct
really happens after all the other files are installed.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv18800

Modified Files:
	configure.ac 
Log Message:

Moved some definitions and AC_SUBSTitution opf variables from
doc/docbook/configure.ac to configure.ac, so that they fall outside the
conditional enable_docbook and the some target files get correctly installed
without needing to be built.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv4987

Modified Files:
	sysloc.in 
Log Message:

Make the checks for oct/m files installation dirs work with Octave 2.0.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv10884

Modified Files:
	sysloc.in 
Log Message:
Oops, there was a spurious echo command left behind in my last commit of
this file.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv32712

Modified Files:
	configure.ac 
Log Message:
Use AC_CONFIG_FILES instead of the deprecated method of passing arguments to
AC_OUTPUT.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv32256

Modified Files:
	sysloc.in 
Log Message:
Replace non-working has_x11 logic with tested have_x logic.
Remove PLF77PATH, PLF77LIBS, and with_dbmalloc cruft.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv1034

Modified Files:
	configure.ac 
Log Message:
Change defaults:

with_freetype=yes
enable_dyndrivers=yes
enable_octave=yes
enable_ntk=yes

remove dbmalloc and fseek cruft.

Move AC_PATH_XTRA before sysloc.in include so that automatic have_x logic
that comes with this macro works in sysloc.in and can completely replace the
non-working has_x11 logic there.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv29782

Modified Files:
	configure.ac sysloc.in 
Log Message:
One more default change:

with_double=yes

Remove with_gcc

Replace with_shlib with enable_shared logic.  Now, octave, python, and java
all rightly depend on shared libraries being built.

Output reorganized including the have_x result, enable_shared and
enable_static, and with_debug, with_opt, with_warn, and with_profile
separated out waiting for further action.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv15428

Modified Files:
	plplot.pc.in plplot-double.pc.in 
Log Message:
Added FreeType library flags to be AC_SUBSTituted by configure.  Changed the
description string for plplot-double.pc.in, to avoid the "(double precison)"
being shown twice when using pkg-config --list-all.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv16383

Modified Files:
	configure.ac 
Log Message:

Changed the SOVERSION to 8:0:3, as per my post in plplot-devel.  This soname
version change is necessary, since the PLplot library API has been changed
(but backward compatibility is guaranteed).  If before the next official
release the API becomes backwards incompatible, we _must_ reset the
SOVERSION to 6:0:0.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv2796

Modified Files:
	INSTALL Makefile.am bootstrap.sh configure.ac 
Log Message:
Moved from "lib" dir to "data" dir

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv7908

Modified Files:
	INSTALL 
Log Message:
Oops. Reverting to version 1.5

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv12040

Modified Files:
	bootstrap.sh 
Log Message:
Oops, reverting to version 1.10

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv16756

Modified Files:
	Makefile.am 
Log Message:
Add the "lib" directory to SUBDIRS.
The "lib" directory contains the csa and nn libraries that support some of plgriddata() algorithms.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv18360

Modified Files:
	configure.ac 
Log Message:
Make the Makefiles in lib, lib/nn and lib/csa.
Verify the existance of libqhull and define HAVE_QHULL.
   The test should also verify that plplot was configured with double and qhull compiled with doubles.
   This last test can be done with:
         #include <qhull/qhull_a.h>;
         assert(sizeof(REAL) == sizeof(double));

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv18892

Modified Files:
	sysloc.in 
Log Message:
Verify the existance of libqhull and define HAVE_QHULL.
   The test should also verify that plplot was configured with double and qhull compiled with doubles.
   This last test can be done with:
         #include <qhull/qhull_a.h>;
         assert(sizeof(REAL) == sizeof(double));
Attempt to define CSALIBS and NNLIBS.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv12112

Modified Files:
	configure.ac 
Log Message:
Added MY_ARG_WITH(double, ...), such that option --with-double is shwon by
configure --help.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv23138

Modified Files:
	configure.ac 
Log Message:
Added MY_ARG_WITH(qhull, ...)

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv32646

Modified Files:
	sysloc.in 
Log Message:
Check for with-double when cheching for Qhull.
Use AC_MSG_WARN instead of AC_MSG_RESULT in some places.

On Sunday 02 March 2003 01:56, Joao Cardoso wrote:
> Update of /cvsroot/plplot/plplot
> In directory sc8-pr-cvs1:/tmp/cvs-serv18892
>
> Modified Files:
> =09sysloc.in
> Log Message:
> Verify the existance of libqhull and define HAVE_QHULL.
>    The test should also verify that plplot was configured with double a=
nd
> qhull compiled with doubles. This last test can be done with:
>          #include <qhull/qhull_a.h>;
>          assert(sizeof(REAL) =3D=3D sizeof(double));

This is a nonsense! Users could reinstall Qhull with floats. Instead, I w=
ill=20
verify this at runtime.

Joao

> Attempt to define CSALIBS and NNLIBS.
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Plplot-cvs mailing list
> Plplot-cvs@...
> https://lists.sourceforge.net/lists/listinfo/plplot-cvs

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv12395a

Modified Files:
	configure.ac 
Log Message:
Show --with-qhull status in the summary.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv31869

Modified Files:
	configure.ac 
Log Message:
OOps, reverted to the previous version in AM_INIT_AUTOMAKE

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv32194

Modified Files:
	Makefile.am 
Log Message:

Put "lib" before "src" in the src_dirs list, which is later included in the
SUBDIRS variable.  Otherwise, the compilation in src/ fails, because it is
done before the libs in lib/ are built.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv2985a

Modified Files:
	sysloc.in 
Log Message:

Changed the occurences of -l{nn,csa} to $(top_builddir)/lib/*/lib*.la.  When
using Libtool, this is the Right Way (TM) of doing things.  The lib*.la
files should always be used for linking, even if those libraries will get
installed in the system later.

The problem with using -l{nn,csa} is that in some cases the library
installed in the system (in /usr/lib, say) is used instead of those built in
the source tree.  I have been bitten by this bug already.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv1677

Modified Files:
	configure.ac 
Log Message:
Reorganize the output summary

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv2468

Modified Files:
	sysloc.in 
Log Message:
Enable the usage of nn/csa even if plplot is configured with floats.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv9934

Modified Files:
	sysloc.in 
Log Message:
Oops, wrong quotes around libcsa/libnn

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv13126

Modified Files:
	configure.ac 
Log Message:
Creates an AM_CONDITIONAL on with_qhull to enable the conditionalal compilation of the nn library if Qhull was not found or was disabled with --with-qhull=no (or --without-qhull)

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv14690

Modified Files:
	sysloc.in 
Log Message:
Small syntax modification on Check for QHull

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv28197

Modified Files:
	sysloc.in 
Log Message:
Add action if-not-found in AC_CHECK_LIB when searching for qhull

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv25619

Modified Files:
	Makefile.am 
Log Message:
Added the directories fonts, rpm, and sys to the dist tarball.  Avoid
inclusion of CVS files with dist-hook.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv18491

Modified Files:
	configure.ac 
Log Message:
Add one more option, with_csa, to conditionaly compile the lib/csa directory.
This might be necessary if for certain OS/architectures there are runtime errors
due to NaN issues in this library -- a test must be written to detect the situation at configure time.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv19371

Modified Files:
	sysloc.in 
Log Message:
Add one more option, with_csa, to conditionaly compile the lib/csa directory.
This might be necessary if for certain OS/architectures there are runtime errors
due to NaN issues in this library -- a test must be written to detect the situation at configure time.
Add correct the CFLAGS to avoid the above described situation under alpha/OSF1.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv23386

Modified Files:
	configure.ac sysloc.in 
Log Message:
Use pthreads with the xwin driver, if --with-pthreads is specified. --with-pthreads defaults to no.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv21778

Modified Files:
	configure.ac Makefile.am 
Log Message:
Moved files plplot*.pc into the newly created directory pkgcfg.  Changed
configure.ac and Makefile.am accordingly.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv22665

Removed Files:
	plplot-double.pc.in plplot.pc.in 
Log Message:
Removed files now in pkgcfg/.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv7853

Modified Files:
	Makefile.am 
Log Message:

Good news for Alan: I revised my way of packaging and decided to include the
debian directory into the distribution tarball.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv17841

Modified Files:
	Makefile.am 
Log Message:
The jadeout.log file, which is generated during the DocBook buidl should be
removed by make clean.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv10678

Modified Files:
	sysloc.in 
Log Message:
After Joao's suggestion, improved the way the plplot_octave-libdir.oct file
is generated, such that it is not doubly compiled (should also work for
octave 2.0).  The check for flag --compile of mkoctfile is removed from
sysloc.in, as well as the AM conditional mkoctfile_accepts_c_flag.  

Also, plplot_octave_txt/* is added to the list of CLEANFILES.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv13190

Modified Files:
	Makefile.am 
Log Message:
Added sysloc.in to EXTRA_DIST.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv10951

Modified Files:
	configure.ac 
Log Message:

Switched :

    plplot.pc.in        -> plplot-float.pc.in
    plplot-double.pc.in -> plplot.pc.in

This reflects the fact that we have now with_double=yes in configure.ac.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv26299

Modified Files:
	configure.ac Makefile.am 
Log Message:

This is the brute force approach to get "make dist" to include (almost) all
the files that are present in a freshly checked out CVS tree.  The notable
exceptions are the directories cf/, new/, tmp/, and bindings/perl5. This was
essentially done by putting files in the EXTRA_DIST variable in the
Makefile.am files.

I really dislike this brute force method, but since we really need to make a
release soon, I see no way of doing otherwise.  I would prefer to take this
opportunity to remove some legacy cruft and to improve our installation in a
file-per-file basis.  For instance, in directory bindings/tcl, I added
blindly the files README.tclAPI and plitclgen to EXTRA_DIST, but it is clear
that they could be installed somewhere with "make install".  Same commentary
for the Python and Java stuff.  Since I am (almost) totally ignorant on
Python, Java and Tcl/Tk, I will really appreciate if competent developers
step in.

This cleanup + installation improvement discussion must take place in the
post-release times.

An aside note: the EXTRA_DIST variable (or the variables it uses) should not
be inside conditionals in Makefile.am, otherwise the distribution tarball
may be wrong.  This is not yet consistently done throughout the source tree.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv14287

Modified Files:
	configure.ac bootstrap.sh 
Log Message:

Added options --version=VER, --date-version, and --help to bootstrap.sh.
Added a comment in configure.ac to remember the developers to not mess up
with the format of the AM_INIT_AUTOMAKE line.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv26906

Modified Files:
	configure.ac 
Log Message:

The AM_CONDITIONALs inside the macro CHECK_PROG (in
doc/docbook/configure.ac) were not being defined when --disable-docbook was
given to configure.  The only relevant AM_CONDITIONAL (namely has_onsgmls)
has been moved outisde the test for enable_docbook in configure.ac.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv31197

Modified Files:
	configure.ac 
Log Message:
Change version number to 5.2.0.cvs as discussed on list.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv24857

Modified Files:
	configure.ac 
Log Message:

Implemented the check of programs and Perl modules necessary to build the
files in bindings/octave/plplot_octave_txt/.  The extension of the present
change is quite large, because the previous situations was quite
constraining.  Indeed, the checks for Perl modules were buried in
bindings/octave/configure.ac, which was included in configure.ac
conditionally on enable_docbook.

To make the idea work, I had to split bindings/octave/configure.ac into two
parts: the first one consisted of macro definitons, configure options
declarations and things alike, that can (and sometimes must) run
inconditionally.  This material has been moved into a new file called
bindings/octave/docbook.m4 (BTW, having two configure.ac in the source tree
was an aberration).

The second part consisted of the actual checks (for programs, DTDs, and Perl
modules), which should be run conditioanlly.  This material has been
inserted into configure.ac.

The specific tests for the Octave bindings regard the program Perl, and the
Perl modules XML::DOM and XML::Parser, which are used by api2text.pl to
build the text documentation files.  If the tests go okay, api2text.pl is
called in bindings/octave/Makefile.am, if needed.  Otherwise, thanks to the
new AM_CONDITIONAL has_xml_pm, if recompilation of the *.txt files is
needed, then the make and shows the error message:

    Perl modules not available: cannot generate plplot_octave_txt/*.txt

This has been tested in trivial cases, but must still be made bullet-proof.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv6874

Modified Files:
	sysloc.in 
Log Message:

Added AC_SUBSTitution of variable OCTAVE_VERSION.  This has no impact in the
current version of the configuration scheme, but I am adding it for
completeness sake.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv3855

Modified Files:
	sysloc.in 
Log Message:
Made OCTAVE_VERSION store just the version number, and not the (<arch>) that
was appended before.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv6116

Modified Files:
	sysloc.in 
Log Message:

The logic for checking the swig verison number is correct now.  If the swig
program was unavailable, configure would die with:

    ./configure: line 12163: < 17: syntax error: operand expected (error 
    token is "< 17")

This fixes Debian Bug#184694.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv26280

Modified Files:
	configure.ac acinclude.m4 
Log Message:
Excerpt of acinclude.m4, regarding this change:

dnl ------------------------------------------------------------------------
dnl Make AC_OUTPUT smarter
dnl     CFFILES_SAVE
dnl     AC_OUTPUT
dnl     CFFILES_RESTORE_MAYBE
dnl The macros below prevent needless touching of <file> when AC_OUTPUT
dnl makes AC_SUBSTitution of <file>.in.  This will avoid unnecessary
dnl recompilations when <file> is in the list of dependencies in a Makefile
dnl rule. These macros should be put around the call to AC_OUTPUT.  They rely
dnl on the autoconf variable ac_config_files, set by the AC_CONFIG_FILES
dnl macro.
dnl
dnl Since this is an experimental feature, a new configure option is
dnl introduced (--enable-smart-ac-output) which defaults to "no".  Hence,
dnl without specifying this option, the behavior of configure is the same
dnl as before.

Alan, if this works as expected (and it does seem to work), then you can go
and change all my "sloppy style" dependencies in the Makefile.am files!

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv1125

Modified Files:
	bootstrap.sh 
Log Message:
Fixed inconsistent spelling bug: aclocal_options ==> aclocal_opts

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv10266

Modified Files:
	sysloc.in 
Log Message:

This is the implementation of Joao's idea: if the Octave prefix does not
coincide with the PLplot one, then the plplot_octave.oct file is installed
in the same directory of the .m scripts (PLPLOT_OCTAVE_DIR).  Otherwise, it
gets installed in the Octave versioned directory present already in the
system (${prefix}/libexec/octave/<version>/oct/<arch>).

This has the nice effect of really limiting the use of PLplot_Octave to the
version of Octave with which the bindings have been built.  I recently knew
that there are binary incompatibilities between the .oct files generated
with mkoctfile-2.1.36 and mkoctfile-2.1.46.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv25095

Modified Files:
	Makefile.am 
Log Message:

Added config.status to EXTRA_DIST list.  This is completely harmless in
normal operation (since this file is regenerated at each call to configure),
but its inclusion in the tarball is essential to avoid unneeded
recompilation of the docs.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv1351

Modified Files:
	configure.ac acinclude.m4 Makefile.am 
Log Message:

I think that I finally got right the avoidance of compilation of the DocBook
files after running configure.  There is now a new configure option, namely
--disable-docbook-build, which is set to "no" by default (the normal
behavior is thus preserved).  There is a new AM_CONDITIONAL (docbook_build,
defined in doc/docbook/docbook.m4) that controls building in
doc/docbook/src/Makefile.am. All my previous hacks involving AC_OUTPUT and
config.status are not needed anymore anmd have been removed from
configure.ac and acinclude.m4.  There is no need for including config.status
in the tarball, and its line has been removed from EXTRA_DIST in
Makefile.am.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv19344

Modified Files:
	configure.ac 
Log Message:
Remove ability of user to modify PYTHON_INSTDIR.  This symbol is only
used in examples/python/plplot_python_start.py.in, but any deviation from
the $pythondir value (with actual prefix replacing the symbolic prefix
used in that symbol) would break examples/python/plplot_python_start.py.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv11834

Modified Files:
	configure.ac 
Log Message:

Implementation of Alan's idea for better control of Docbook documentation
check/build.  The previous options --enable-docbook and
--enable-docbook-build have been replaced by:

  --enable-builddoc       Enable configuration checks and build of DocBook
                          documentation. Default value is "no".

  --with-prebuiltdoc      Assume that the DocBook documentation is already
                          built and present in doc/docbook/src, ready to be
                          installed. This option is useful for package
                          maintainers. Default value is "no".

Specifying both options at the same time is logically inconsistent and will
result in an error message with configure been stopped.

The implementation was quite straightforward, because I just wrapped the two
AM_CONDITIONALs enable_docbook and docbook_build around the two configure
options above.  

A nice improvement over the previous situation is that the Docbook checks
are not exercised when the docs are already present and needs only
installation (i.e. when using --with-prebuiltdoc).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv2094

Modified Files:
	configure.ac 
Log Message:
Define new symbol PLPLOT_TCL_VERSION=5 and use it in the various
configured pkgIndex.tcl files.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv31672

Modified Files:
	acinclude.m4 configure.ac 
Log Message:

Added the definition of macro CHECK_GNU_MAKE in acinclude.m4 and its call in
configure.ac.  This macro checks for the GNU make program.  For now, no
action is taken, but this may be used in the future for disabling the
documentation building, since the make-GNUisms are not going to be removed
from doc/docbook/src/Makefile.am.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv23378

Modified Files:
	configure.ac 
Log Message:
Fix ordering bug (perl must be checked before perl modules) that was
introduced recently with --enable-builddoc changes.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv12448

Modified Files:
	configure.ac 
Log Message:
Refine the perl, XML::DOM and XML::Parser check logic so it will not
occur when the documentation is prebuilt.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv30958

Modified Files:
	configure.ac 
Log Message:
Made check for perl always occur in configure (at Alan's request).  I agree
that this seem necessary, since perl is called to build the tclAPI stuff in
the drivers/ directory.  I have never noticed that and found very strange
that we have this duplication of code in respect to bindings/tcl.  I am
almost sure that it must be an elegant way to avoid this duplication.

Also, for consistency, changed "perl" to "$(PERL)" in drivers/Makefile.am.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv26275

Modified Files:
	configure.ac 
Log Message:
Append $X_CFLAGS to TKINCCMD.  (X_CFLAGS is defined on all platforms,
and some platforms [netbsd for one] need the X include location part of the 
TKINCCMD string in order to compile anything that includes the Tk header).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv28401

Modified Files:
	configure.ac 
Log Message:
This set of changes should fix some (if not all) of the remaining problems
with the tarball generation related to built files generated with Perl.  The
$PERL variable is now set the a warning message in configure.ac, such that
if Perl in not found by configure, make will not die furiously.  I hope I
traced down all the places where Perl scripts are invoked in the Makefile.am
files and I prepended $(PERL) to the calls.  There may be some others
remaining places still (excepted doc/docbook), though.

With the current changes, regular users building from the tarball do not
need Perl available in their systems in order to build and install PLplot.
The last problem that I noticed was with the generation of the
bindings/octave/plplot_octave_txt/*.txt files.  The doc-stamp target has
been brought outside the AM_CONDITIONAL enable_octave and the EXTRA_DIST
variable is not set conditionally anymore.

Also, fixed the macro CHECK_PORG in doc/docbook/docbook.m4, which is used to
detect the Perl program.  The variable PROG is now correctly set to the null
string if the program is not detected.

Unrelated to the above, a check for the libm is introduced before the check
of functions isinf, finite, and isnan.  This should fix the configure
problem in Alpha-OSF.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv24980

Modified Files:
	bootstrap.sh 
Log Message:
Commit Rafael's suggested logic change for improving the default for
aclocal_opts.  The new code works for me, and the logic looks good.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv32572

Modified Files:
	bootstrap.sh 
Log Message:

I am commiting my original version.  The snippet sent to plplot-devel was
just to make sure that it would work in other OSes.  The options given by
the user when invoking bootstrap.sh are should not be overridden.  Also, if
the aclocal directory check does not succeed, fall back to a default
value.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv30203

Modified Files:
	bootstrap.sh 
Log Message:

Show the aclocal options being used.  Also, show the version string used to
patch configure.ac.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv9176

Modified Files:
	configure.ac 
Log Message:

Added signal handler to catch SIGSEGV and print the error that occurred in
libltdl when trying to open the driver module.  This will give us further
informations when problem arises in exotic systems (like netbsd :-).

Also, added a call to macro AC_TYPE_SIGNAL in configure.ac to determine the
return type of signal handlers (#define RETSIGTYPE).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv960

Modified Files:
	configure.ac 
Log Message:

This is the workaround for the broken linker variables set in mkoctfile in
the NetBSD system, as discussed in plplot-devel.  

A new AC_SUSBTituted variable, called MKOCTFILE_VARS, has been created.  If
configure runs in a NetBSD* system and the C++ compiler is g++, then the
SH_LD and SH_LDFLAGS are set appropriately and used in the invokation of
mkoctfile in bindings/octave/Makefile.am.

A flashy warning comment has been put in configure.ac, and a AC_MSG_WARN is
issued when the variables are set.  It looks like this:

    configure: WARNING: Setting mkoctfile variables for broken NetBSD system

Of course, I cannot fully test this changes.  Please, Alan (or whoever),
test it.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv17784

Modified Files:
	sysloc.in 
Log Message:
Fix MATWRAP bug when there is an installed version.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv12541

Modified Files:
	sysloc.in 
Log Message:
Removed the line "MATWRAP=matwrap", which has been made obsolete by the
latest change in the logic for setting the matwrap path.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv20802

Modified Files:
	configure.ac 
Log Message:
Configure test_python.sh with python command name (which is not python on
some evil systems like netbsd and RedHat which use a versioned python
command name).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv18218

Modified Files:
	bootstrap.sh 
Log Message:
Reversed the order of invokation of libtoolize and automake.  With this
change, the ltmain.sh script should be included into the distribution
tarball now.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv20560

Modified Files:
	configure.ac 
Log Message:
If no F77 compiler is found, then the building of the f77 bindings is
disabled.  A configure warning message is shown if this happens.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv16841

Modified Files:
	bootstrap.sh 
Log Message:
Regenerate libltdl/configure by copying configure.in to configure.ac. This
triggers version 2.57 compatibility mode, instead of version 2.13.  The
configure bug that happened when the environment variables CC and F77 are
set should be fixed now.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv27859

Modified Files:
	configure.ac 
Log Message:
If option --prefix is not given to configure, then set $prefix to the
default value ($ac_default_prefix).  This is done just before the setting of
the PLplot install locations variables (LIB_DIR, INCLUDE_DIR, BIN_DIR, and
TCL_DIR).  Actually, this default replacement of $prefix is done when
AC_OUTPUT is invoked, but this was too late, and "NONE" was being inserted
into plConfig.h.  The correct default value (/usr/local) is now used.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv10057

Modified Files:
	sysloc.in 
Log Message:
Removed all spaces between commands in sed scripts.  This should fix the
configuration problems in Alpha/OSF1.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv22357

Modified Files:
	Makefile.am acinclude.m4 bootstrap.sh configure.ac sysloc.in 
Log Message:
Updated Copyright notices by adding year 2003.  This does not cover all the
files changed this year (for instance, drivers/*.c are lacking), but this is
an important step for the legal release of PLplot 5.2.1.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv30909

Modified Files:
	configure.ac 
Log Message:
Move the setting of prefix using $ac_default_prefix before the AC_INCLUsion
of sysloc.in, such that the default prefix is available there.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv31301

Modified Files:
	sysloc.in 
Log Message:
Added four pairs of AC_MSG_CHECKING/AC_MSG_RESULT for some Octave
configuration variables (version, prefix, m_dir, and oct_dir).  

It is nice to have a more verbose configure log, but the reason for this
change is to help me understanding why the Debian build daemon fails for
some exotic architectures (hppa and powerpc) when checking the Octave
configuration.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv13333

Modified Files:
	configure.ac 
Log Message:
Move the inclusion of libm in LIBS to the top, before including sysloc.in, as some detection logic in sysloc.in might need libm.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv31628

Modified Files:
	configure.ac 
Log Message:
Introduce LIBRARY_VERSION to inform tcl/tk of the PLplot library suffix.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv730

Modified Files:
	configure.ac 
Log Message:
Release 5.2.1.rc2

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv7866

Modified Files:
	configure.ac 
Log Message:
Release 5.2.1.rc3

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv13448

Modified Files:
	configure.ac 
Log Message:
Tag release 5.2.1 (in AM_INIT_AUTOMAKE)

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv27855

Modified Files:
	Makefile.am 
Log Message:
Added cf/plplot-config to the list of scripts to install.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv28102

Modified Files:
	configure.ac 
Log Message:
Added cf/plplot-config to the list of files to generate.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv18858

Modified Files:
	Makefile.am configure.ac 
Log Message:
Moved script plplot-config.in from cf/ to scripts/.  Makefile.am and
configure.ac ajusted accordingly.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv19583

Modified Files:
	Makefile.am 
Log Message:
Added config.summary to CLEANFILES list.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv10694

Modified Files:
	sysloc.in 
Log Message:
Reordered some invocations of macros AC_MSG_CHECKING/AC_MSG_RESULT for the
Octave checks, such that these macros occur immediately after/before the
actual checks.  This should help me understand the nature of configure
errors on some Debian architectures.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv8394

Modified Files:
	bootstrap.sh 
Log Message:
Remove two lines from script (cp configure.in configure.ac and rm -f
configure.ac in the libltdl subdirectory) that were causing problems for 
libtool-1.5 (which has a file called configure.ac in this subdirectory).
I believe this change is still backwards-compatible with libtool-1.4.x,
but if not it should be possible to reinstate in a way that does not screw up
libtool-1.5.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv6311

Modified Files:
	bootstrap.sh 
Log Message:
AWI for Rafael Laboissiere: make bootstrap.sh still work with libtool-1.4
(although we should remove this as soon as we are all using libtool-1.5).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv30056

Modified Files:
	sysloc.in configure.ac 
Log Message:
In sysloc.in, changed the list of directories to search for Python headers
(when setting the PYTHON_INC_DIR variable) to have just:

        $prefix/include/python$PYTHON_VERSION
        /usr/include/python$PYTHON_VERSION
		
instead of a long list of all possible Python versioned include dirs.

This change requires that the call to AM_PATH_PYTHON be made before 
AC_INCLUDE(sysloc.in), in configure.in.  

Also, an additional sanity check for non-emptiness of the PYTHON_VERSION
variable is added to sysloc.in, right at the beginning of the Python
configuration section.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv31621

Modified Files:
	configure.ac 
Log Message:
Oops, the last commit have accidentally removed the scripts/plplot-config
entry from AC_CONFIG_FILES.  Putting it back.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv27125

Modified Files:
	sysloc.in 
Log Message:
If a specific version of Python is present in the system, but the header
file has not be found in {$prefix,/usr}/include/python$PYTHON_VERSION/, then
the following loud warning message is issued:

configure: WARNING: Header file for Python version 2.3 has not been found.
configure: WARNING: This probably means that an appropriate Python
configure: WARNING: development package needs to be installed.

(Aside note: we should replace in configure.ac and sysloc.in all the
instances of AC_MSG_RESULT by AC_MSG_WARN, when warning messages are
issued.)

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv14261

Modified Files:
	sysloc.in 
Log Message:
Added /usr/include/tcl8.4* directories to the incdirs_default list.  Without
this, configure fails to find itcl.h and itk.h when PLplot is built against
itcl/itk 3.2 (at least in Debian).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv23365

Modified Files:
	bootstrap.sh configure.ac 
Log Message:
Created a new AC_SUBSTitutable variable RELEASE_DATE in configure.ac.  This
variable is automatically set in ISO 6801 formant (YYYY-MM-DD) by the
bootstrap.sh script when options --version or --date-version are specified.
For now, only plplotdoc.xml.in is using it, fixing that long-lasting bug in
the "Release date" of the documentation.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv16322

Modified Files:
	configure.ac 
Log Message:
Enable java by default since that is a reasonably mature interface now.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv30339

Modified Files:
	configure.ac 
Log Message:
Major change:

    * Added a AC_SUSTitutable variable called CPP_SOVERSION in configure.ac.
      This variable is used in option -version-info for setting the
      soversion of libplplotcxx in file bindings/c++/Makefile.am.
      
Minor changes (in configure.ac):

    * For consistency reason, set RELEASE_DATE=2003-04-22, the actual date
      of release 5.2.1.
      
    * Added some commentaries to the comments preceding the definition of
      SOVERSION.  In particular, the statements about the "secret" libtool
      code are not true.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv15426

Modified Files:
	ChangeLog 
Log Message:
Document recent C++ enhancements.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv20701

Modified Files:
	PROBLEMS 
Log Message:
Brought this file up to date with recent C++ improvements, other issues that
have become resolved, and new issues recognized since the last update.

Developers, please have a look at this file and edit it if you feel there
are issues that should be mentioned/dropped/rewritten.

On the whole, this file is getting gradually smaller which reflects the
patient and much-appreciated efforts of the developers to constantly improve
PLplot.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv2778

Modified Files:
	bootstrap.sh 
Log Message:
Added --force option to the call of libtoolize, forcing the file
ltmain.sh to be overwritten.  This is crucial when running bootstrap.sh with
a new version of Libtool in a non-fresh build tree.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv6053

Modified Files:
	configure.ac 
Log Message:
Made the output of the echo commands that appear before AC_INIT go to stderr
instead of stdout.  This fixes a bug during libtool configuration, since it
relies on a proper functioning of "./configure --fallback-echo" when trying
to determine the maximum command line length.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv18084

Modified Files:
	acinclude.m4 
Log Message:
Added the macro GET_DLNAME(STEM,VERSION_INFO,VARIABLE) to guess the dlname
of a library to be installed by libtool.

For instance, if the following code is used in configure.ac:

    GET_DLNAME([plplottcltk$LIB_TAG], [$SOVERSION], [DLNAME_TCL])
    echo $DLNAME_TCL
	
it will produce:

    libplplottcltkd.so.5
	    
Notice that the code above will work only if placed after the call to
AM_PROG_LIBTOOL and the definitions of $SOVERSION and $LIB_TAG.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv5884

Modified Files:
	configure.ac 
Log Message:
Use Rafael's new GET_DLNAME macro to determine the following dlnames:
DLNAME_LIBPLPLOT, DLNAME_LIBPLPLOTD, DLNAME_LIBPLPLOTTCLTK, and
DLNAME_LIBPLPLOTTCLTKD.  These library dlnames are used to configure the
various bindings/*/pkgIndex.tcl scripts.  Note the scripts currently require
both the single and double-precision names.

Drop LIBRARY_VERSION which is no longer used in these scripts.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv15983

Modified Files:
	acinclude.m4 
Log Message:
The robustness of the macro has been improved.  If GET_DLNAME is called
before AC_LIBTOOL_PROG, the configure script will exit now with an
appropriate error message.  This is not intended for general users, but only
for developers who make changes to configure.ac.

Some comments about the last changes done by Alan:

In the GET_DLNAME macro, $LD was changed to $CC as the command when invoking
libtool --mode=link. Actually, the name of this command is irrelevant to the
actions taken by the libtool script.  However, in version 1.5 (or 1.5.0a) of
libtool, the name is used to guess a "tagged configuration", in case the
option --tag has not been specified.  Using $LD would then trigger an error.
I hope that this macro will be portable across different platforms. The
future will tell us.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv5434

Modified Files:
	acinclude.m4 
Log Message:
Change $LD to $CC in Rafael's new GET_DLNAME macro.  $LD caused "tag" errors
for my particular brand of libtool-1.5 while $CC is fine.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv22992

Modified Files:
	configure.ac 
Log Message:
Quick hack to avoid garbage being stored in the reconfig script when
configure is called recursively with the --fallback-echo option (for
instance, this happens for the checks of maximum command length by the
libtool configuration).

This problem made surface now that we decided to use Libtool 1.5 instead of
1.4.  However, it could have arisen before, because the --falback option and
the implicit rule that the configure script can be called recursively using
this option have always been present in autoconf. In sum, we might try in
the future to restructure configure.ac, in particular rethinking about the
non-orthodox stuff before AC_INIT.  

At any rate, the generation of the reconfig script has been superseded by
"./config.status --recheck".

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv22005

Modified Files:
	PROBLEMS 
Log Message:
Remove NOBRAINDEAD from source tree (except for sys/win-tk and
sys/win32/msdev which I leave to Vince and Olof) as per discussion on list.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv30022

Modified Files:
	PROBLEMS 
Log Message:
Add two issues: generated info file names should be versioned, and xml backend
screws up the info references in Chapter 14 for some reason.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv20137

Modified Files:
	PROBLEMS 
Log Message:
Tweaked wording (docbook2x problem) on problem of missing info references in
Chapter 14.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv14242

Modified Files:
	sysloc.in 
Log Message:
In the check for the Swig version, removed code for sed that was too GNUish.
The check could now be much more portable.

Also, Added a pair of AC_MSG_CHECKING/AC_MSG_RESULT around the version
number check.  In the configure output, something like this will appear now:

    checking Swig version... 1.3.17u-20021128-1508

[ This makes me remember that we should add similar things at some other
  places in configure.ac and sysloc.in.  I have also spotted some improper 
  uses of AC_MSG_RESULT, but this will be fixed when time permits. ]
  
Finally, the robustness of the code has been improved.  In particular, if
something went wrong with the setting of teh variable SWIG_VERSION_MICRO,
then configure choked when doing an arithmetic expansion $(( ... )).  This
is fixed now.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv6582

Modified Files:
	configure.ac 
Log Message:
Allow possibility of DLL's on cygwin as recommended by autobook.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv4239

Modified Files:
	configure.ac 
Log Message:
Fix bug for case when any of libgd, libpng, libjpeg, or libz are available
only as a static library.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv15029

Modified Files:
	sysloc.in 
Log Message:
Changed libnn => libcsironn and libcsa => libcsirocsa to avoid nameclashes
in the future.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv22127

Modified Files:
	sysloc.in 
Log Message:
In include/plplotP.h, include <sys/types.h> before #include <dirent.h>
conditionally to NEED_SYS_TYPES_H, which is AC_DEFINEd in sysloc.in for the
broken MacOSX system (darwin*).

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv11058

Modified Files:
	configure.ac 
Log Message:
Better wording in comment for PL_DOUBLE

The comment preceeding #define PL_DOUBLE is now clearer.  Thanks to Arjen
Markus <arjen.markus@...> for the suggestion.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv7118

Modified Files:
	configure.ac 
Log Message:
Avoid abortion of configure when python is not found

Redefine AC_MSG_ERROR as AC_MSG_WARN around the call to AM_PATH_PYTHON, such
that if python is not found, configure will not stop.

Update of /cvsroot/plplot/plplot
In directory sc8-pr-cvs1:/tmp/cvs-serv27297

Modified Files:
	sysloc.in 
Log Message:
Added -mieee to CXXFLAGS when neeeded. 

Setting the CXXFLAGS variable seems to be necessary for compiling the C++
examples on the Alpha architecture, even when the -mieee option is only
needed for compiling the libcsirocsa and libcsironn libraries.