It looks as if this is either a bug in the Promise ultra 133 Tx2 hardware,
or a bug in the driver. Since you see the same error under Windows and
Linux, can you tell me if the drivers in both cases are proprietary ones
written by Promise, or if one of them is 'open source' and
On Fri, 5 Nov 2004, Bengt-Arne Fjellner wrote:
> Disc supports it!
> I have tried the same disc on the builtin controller and it works fine.
> Just wondering if this is a Program/Bios/Controller/Driver problem.
> And how to test it.
> but here follows output
> .... smartmontools-5.33-1.win32\bin>smartctl.exe -a hdc
> smartctl version 5.33 [i386-pc-mingw32] Copyright (C) 2002-4 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
> =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D
> Device Model: WDC WD600JB-00CRA1
> Serial Number: WD-WMA8F1721798
> Firmware Version: 17.07W17
> User Capacity: 60,022,480,896 bytes
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: 5
> ATA Standard is: Exact ATA specification draft version not indicated
> Local Time is: Fri Nov 05 10:58:33 2004 V=F5steuropa, normaltid
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
> =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D
> SMART overall-health self-assessment test result: PASSED
> General SMART Values:
> Offline data collection status: (0x82) Offline data collection activity
> was completed without error.
> Auto Offline Data Collection: Ena=
> Self-test execution status: ( 247) Self-test routine in progress...
> 70% of test remaining.
> Total time to complete Offline
> data collection: (2340) seconds.
> Offline data collection
> capabilities: (0x3b) SMART execute Offline immediate.
> Auto Offline data collection on/o=
> Suspend Offline collection upon n=
> Offline surface scan supported.
> Self-test supported.
> Conveyance Self-test supported.
> No Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> No General Purpose Logging suppor=
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 43) minutes.
> Conveyance self-test routine
> recommended polling time: ( 5) minutes.
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED=
> WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always =
> 3 Spin_Up_Time 0x0007 115 096 021 Pre-fail Always =
> 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always =
> 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always =
> 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always =
> 9 Power_On_Hours 0x0032 088 088 000 Old_age Always =
> 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always =
> 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always =
> 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always =
> 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always =
> 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always =
> 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always =
> 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always =
> 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline=
> Error SMART Error Log Read failed: Function not implemented
> Smartctl: SMART Error Log Read Failed
> Error SMART Error Self-Test Log Read failed: Function not implemented
> Smartctl: SMART Self Test Log Read Failed
> Device does not support Selective Self Tests/Logging
> Bruce Allen wrote:
> >> On a Promise ultra 133 TX2 controller i get this answer both in
> >> windows and linux. Is this a bug or doesnt this controller/driver
> >> support this feature ?? I have ran these tests under both Os on the
> >> same computer...
> >> Please CC im not on the list
> > Please copy the list for further email.
> >> C:\smartmontools-5.33-1.win32\bin>smartctl.exe -l error -l selftest hd=
> >> smartctl version 5.33 [i386-pc-mingw32] Copyright (C) 2002-4 Bruce All=
> >> Home page is http://smartmontools.sourceforge.net/
> >> =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D
> >> Error SMART Error Log Read failed: Function not implemented
> >> Smartctl: SMART Error Log Read Failed
> >> Error SMART Error Self-Test Log Read failed: Function not implemented
> >> Smartctl: SMART Self Test Log Read Failed
> >> C:\Documents and Settings\baf\Skrivbord\smartmontools-5.33-1.win32\bin=
> > This may be a disk that doesn't support SMART logs. Please send smartc=
> > -a output.
> > Bruce
> Bengt-Arne Fjellner
> 0910-58 53 69