This is also present in the gumdroid 2.6.32 kernel, I swapped to the TWL watchdog as well. I believe it has something to do with the WaterStorm or the version of MLO in the NAND, but I am unsure.
I am upgrading my kernel to 2.6.39 for my Android port, if I get that working, I will be checking the watchdog and if the OMAP watchdog works I'll let you know.
From: Vikram Godbole [mailto:vikram.godbole@...]
Sent: Saturday, 21 April 2012 3:02 PM
Subject: Re: [Gumstix-users] watchdog device
Update: disabling the OMAP watchdog and enabling the TWL4030 watchdog does work; the TWL wdt is able to reboot the COM all the way.
So the question is: what is missing in the OMAP wdt?
On Fri, Apr 20, 2012 at 6:51 PM, Vikram Godbole <vikram.godbole@...>> wrote:
I have a couple of questions on the watchdog timer. I am working on Rowboat kernel 2.6.37, running on a WaterStorm COM/Chestnut43.
1. The default config has the following options enabled (and I see this in current Sakoman configs as well):
Both, the omap and twl4030 watchdog drivers register with minor number WATCHDOG_MINOR. The OMAP driver loads first, and since a device with that minor is already registered, the loading of the TWL4030 watchdog always fails:
twl4030_wdt twl4030_wdt: Failed to register misc device : retval -16
twl4030_wdt: probe of twl4030_wdt failed with error -16
What is the intent here? Surely both watchdog drivers cannot coexist unless the minor numbers are changed? Should only one of the two be enabled by default?
2. I tried running the demo here with the omap watchdog (which is the one that gets loaded first):
and sure enough, if the watchdog isn't kicked, the COM reboots... or rather, tries to. The LCD goes gray and gets bands on it which makes it seem like the machine is trying to reboot- but the reboot doesn't complete. I have to manually press the RESET button on the Chestnut board to reboot. Why is this? Isn't the OMAP watchdog driver capable of rebooting the COM? Or is some other functionality needed for that? I had read on this list sometime back that there is an issue with the OMAP watchdog driver w.r.t. the DM37x CPUs on the Storm series COMs- is that true? I have not tried disabling the OMAP watchdog and enabling the one on the TWL yet.
CAUTION: This message was sent via the Public Internet and its authenticity cannot be guaranteed.
PROPRIETARY: This e-mail contains proprietary information some or all of which may be legally privileged. It is intended for the recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the authority by replying to this e-mail. If you are not the intended recipient you must not use, disclose, distribute, copy, print, or rely on this e-mail.