Get rid of the "quiet" and "rhgb" items in the grub.conf.
Then you will be able to see whats going on.
Its highly likely that your initrd image is stuffed. I boot off
a qla2300 array, and due to a module that was present in the
redhat kernel, but not in the SSI kernel (qla2300_conf), the
initrd failed to include the qla2300 driver.
Also, get the patched mount and mkinitrd commands from roger
tsang. My cluster refused to play until they were in place, and I'd
manually re-run mkinitrd.
On Tue, 2005-08-23 at 11:10 -0700, Wayne West wrote:
> I am having trouble getting the SSI 1.9.1 development kernal to boot. I
> installed the Fedora Core as instructed followed by the installation of
> the SSI openssi-fc3-1.9.1.i686. I ran the install with no aparent issues.
> Upon boot, the system fails with the following:
> Booting 'Fedora Core (2.6.10_ssi_2develsmp)
> Filesystem type is ext2fs, partition type 0x83
> Kernal /vmlinuz-2.6.10-ssi_2develsmp ro root=LABEL=/ rhgb quiet
> [Linux-bzImage, setup=0x1400, size=0x23d90b]
> Initrd /initrd-2.6.10-ssi_2sdevelsmp.img
> [Linux-initrd @ 0x2ff7e000, 0x615fb bytes]
> Uncompressing Linux... OK, booting Kernel.
> kbd-cmd bpa panic_hook
> Instruction(i) BP #0 at 0xc0127720 (panic_hook)
> is enable globally adjust 1
> kbd_cmd defcmd archkbd "" "First line debugging"
> kbd_cmd defcmd archkbdcpu "" "archkdb with only tasks on cpus"
> kbd_cmd defcmd archkbdshort "" "archkbd with less detailed backtrace"
> kbd_cmd defcmd archkbdcommon "" "Common arch debugging"
> Kernel panic - not syncing: no init found. Try passing init= option to kernel.
> Endtering kbd (current=0xc19715b0, pid 2) on processor 0 due to KDB_ENTER()
>  kbd >
> I have tried using the init option as suggested but got the same results.
> The Fedora kernal vmlinuz-2.6.9-1.667 boots fine on this system.
> Any help would be greatly appreciated.
> Wayne West
> SF.Net email is Sponsored by the Better Software Conference & EXPO
> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
> Ssic-linux-users mailing list
> In order to protect our email recipients, Betfair use SkyScan from
> MessageLabs to scan all Incoming and Outgoing mail for viruses.
Andy Phillips, FRAS
Systems Architect, Performance and Test Manager.
Direct Line: 0208 834 8436
Waterfront | Hammersmith Embankment | Chancellors Road London | W6 9HP
The information in this e-mail and any attachment is confidential and is
intended only for the named recipient(s). The e-mail may not be
disclosed or used by any person other than the addressee, nor may it be
copied in any way. If you are not a named recipient please notify the
sender immediately and delete any copies of this message. Any
unauthorized copying, disclosure or distribution of the material in this
e-mail is strictly forbidden.Any view or opinions presented are solely
those of the author and do not necessarily represent those of
Betfair.Betfair is the trading name of The Sporting Exchange Limited
whose registered office is: Waterfront, Hammersmith Embankment,
Chancellors Road, London W6 9HP. Registered in England with No. 3770548.