Bacula

>>>>> On Thu, 19 Jul 2012 11:35:16 +0200, Tobias Dinse said:
> 
> yesterday we have moved our old physical Servers to an esxi 5 
> Environment. I created an new VM with Debian 6 x64 - Hardware passtrough 
> for the Controller (h200 / IBM LTO3 Streamer) and bacula-sd-mysql 
> Version 5.2.6
> 
> I can label / mount all Volumes fine. But if I start an Backup Job the 
> bacula-sd services crasehs with the follow messages:
> ...
> lx03-baculasd-ourcustomer-sd: job.c:95-0 >dird: 3915 Bad Job command. stat=-1 CMD: JobId=4143 job=lx01-gw01-ourcustomer.2012-07-19_11.24.06_08 job_name=lx01-gw01-ourcustomer client_name=lx01-gw01-ourcustomer-fd type=66 level=70 FileSet=Full>Set NoAttr=0 SpoolAttr=0 FileSetMD5=uRUmnm122BMpY7QWJj/eCC SpoolData=1 WritePartAfterJob=1 PreferMountedVols=1 SpoolSize=0 Resched=2616184

Looks like you need to upgrade the version of Bacula that is running the
bacula-dir to 5.2.6 as well (or both to 5.2.10).

__Martin

On 2012-07-19 13:11, Martin Simmons wrote:
>>>>>> On Thu, 19 Jul 2012 11:35:16 +0200, Tobias Dinse said:
>>
>> yesterday we have moved our old physical Servers to an esxi 5
>> Environment. I created an new VM with Debian 6 x64 - Hardware 
>> passtrough
>> for the Controller (h200 / IBM LTO3 Streamer) and bacula-sd-mysql
>> Version 5.2.6
>>
>> I can label / mount all Volumes fine. But if I start an Backup Job 
>> the
>> bacula-sd services crasehs with the follow messages:
>> ...
>> lx03-baculasd-ourcustomer-sd: job.c:95-0 >dird: 3915 Bad Job 
>> command. stat=-1 CMD: JobId=4143 
>> job=lx01-gw01-ourcustomer.2012-07-19_11.24.06_08 
>> job_name=lx01-gw01-ourcustomer client_name=lx01-gw01-ourcustomer-fd 
>> type=66 level=70 FileSet=Full>Set NoAttr=0 SpoolAttr=0 
>> FileSetMD5=uRUmnm122BMpY7QWJj/eCC SpoolData=1 WritePartAfterJob=1 
>> PreferMountedVols=1 SpoolSize=0 Resched=2616184
>
> Looks like you need to upgrade the version of Bacula that is running 
> the
> bacula-dir to 5.2.6 as well (or both to 5.2.10).

The issue: both bacula-dir and bacula-sd *MUST ALWAYS* be the same 
version.

The clue is the 'Bad Job command', which means the SD was asking to do 
something it did not understand.

Have you put both the SD and the DIR to the same version?

Did that fix the problem?

-- 
Dan Langille - http://langille.org/

on the director:

ii  bacula-director-common                   
5.0.2-2.2+b1                        network backup, recovery and 
verification - Director common files
ii  bacula-director-mysql                    
5.0.2-2.2+b1                        network backup, recovery and 
verification - MySQL storage for Director

on sd:

ii  bacula-common                       5.2.6+dfsg-1~bpo60+1         
network backup, recovery and verification - common support files
ii  bacula-common-mysql                 5.2.6+dfsg-1~bpo60+1         
network backup, recovery and verification - MySQL common files
ii  bacula-sd                           5.2.6+dfsg-1~bpo60+1         
network backup, recovery and verification - storage daemon
ii  bacula-sd-mysql                     5.2.6+dfsg-1~bpo60+1         
network backup, recovery and verification - MySQL SD tools

It was my own fail. I tried to use an newer Version of bacula-sd to 
avoid the segmentation error. The true Error Msg of bacula-dir with the 
same versions on both side:


20-Jul 09:35 lx02-oracle-ourcustomer-dir JobId 4147: Start Backup JobId 
4147, Job=lx01-gw01-ourcustomer.2012-07-20_09.35.31_18
20-Jul 09:35 lx02-oracle-ourcustomer-dir JobId 4147: Fatal error:
      Storage daemon didn't accept Device "IBM-LTO3-sd" command.
20-Jul 09:35 lx02-oracle-ourcustomer-dir JobId 4147: Error: Bacula 
lx02-oracle-ourcustomer-dir 5.0.2 (28Apr10): 20-Jul-2012 09:35:33
   Build OS:               i486-pc-linux-gnu debian squeeze/sid
   JobId:                  4147
   Job:                    lx01-gw01-ourcustomer.2012-07-20_09.35.31_18
   Backup Level:           Full
   Client:                 "lx01-gw01-ourcustomer-fd" 5.0.2 (28Apr10) 
i486-pc-linux-gnu,debian,squeeze/sid
   FileSet:                "Full Set" 2007-05-22 17:14:12
   Pool:                   "DonnerstagPool" (From User input)
   Catalog:                "MyCatalog" (From Client resource)
   Storage:                "IBM-LTO3-dir" (From Job resource)
   Scheduled time:         20-Jul-2012 09:35:27
   Start time:             20-Jul-2012 09:35:33
   End time:               20-Jul-2012 09:35:33
   Elapsed time:           0 secs
   Priority:               10
   FD Files Written:       0
   SD Files Written:       0
   FD Bytes Written:       0 (0 B)
   SD Bytes Written:       0 (0 B)
   Rate:                   0.0 KB/s
   Software Compression:   None
   VSS:                    no
   Encryption:             no
   Accurate:               no
   Volume name(s):
   Volume Session Id:      1
   Volume Session Time:    1342769650
   Last Volume Bytes:      64,512 (64.51 KB)
   Non-fatal FD errors:    0
   SD Errors:              0
   FD termination status:
   SD termination status:
   Termination:            *** Backup Error ***


Syslog on sd:

Jul 20 09:35:30 lx03-baculasd-ourcustomer bacula-sd: Bacula interrupted 
by signal 11: Segmentation violation

after getting this error Msg the sd-service crashing down

ps xa|grep bacula-sd
3897 pts/1    S+     0:00 grep bacula-sd

regards

Tobias

Am 19.07.2012 21:35, schrieb Dan Langille:
> On 2012-07-19 13:11, Martin Simmons wrote:
>>>>>>> On Thu, 19 Jul 2012 11:35:16 +0200, Tobias Dinse said:
>>> yesterday we have moved our old physical Servers to an esxi 5
>>> Environment. I created an new VM with Debian 6 x64 - Hardware
>>> passtrough
>>> for the Controller (h200 / IBM LTO3 Streamer) and bacula-sd-mysql
>>> Version 5.2.6
>>>
>>> I can label / mount all Volumes fine. But if I start an Backup Job
>>> the
>>> bacula-sd services crasehs with the follow messages:
>>> ...
>>> lx03-baculasd-ourcustomer-sd: job.c:95-0>dird: 3915 Bad Job
>>> command. stat=-1 CMD: JobId=4143
>>> job=lx01-gw01-ourcustomer.2012-07-19_11.24.06_08
>>> job_name=lx01-gw01-ourcustomer client_name=lx01-gw01-ourcustomer-fd
>>> type=66 level=70 FileSet=Full>Set NoAttr=0 SpoolAttr=0
>>> FileSetMD5=uRUmnm122BMpY7QWJj/eCC SpoolData=1 WritePartAfterJob=1
>>> PreferMountedVols=1 SpoolSize=0 Resched=2616184
>> Looks like you need to upgrade the version of Bacula that is running
>> the
>> bacula-dir to 5.2.6 as well (or both to 5.2.10).
> The issue: both bacula-dir and bacula-sd *MUST ALWAYS* be the same
> version.
>
> The clue is the 'Bad Job command', which means the SD was asking to do
> something it did not understand.
>
> Have you put both the SD and the DIR to the same version?
>
> Did that fix the problem?
>


-- 
# Stegbauer Datawork
# Tobias Dinse
# +49 (8571) 922213
# Oberjulbachring 9, 84387 Julbach

>>>>> On Fri, 20 Jul 2012 09:41:26 +0200, Tobias Dinse said:
> 
> Syslog on sd:
> 
> Jul 20 09:35:30 lx03-baculasd-ourcustomer bacula-sd: Bacula interrupted 
> by signal 11: Segmentation violation
> 
> after getting this error Msg the sd-service crashing down

The next step is to attach gdb to the bacula-sd process before it crashes and
then get backtraces with "thread apply all bt".  You may need to recompile it
with debugging options (CFLAGS="-g").

__Martin

Hi,

the Debug Informations are on the Attachment. It create it manually like 
it was shown on the Bacula Homepage.

regards

Tobias


Am 20.07.2012 20:11, schrieb Martin Simmons:
>>>>>> On Fri, 20 Jul 2012 09:41:26 +0200, Tobias Dinse said:
>> Syslog on sd:
>>
>> Jul 20 09:35:30 lx03-baculasd-ourcustomer bacula-sd: Bacula interrupted
>> by signal 11: Segmentation violation
>>
>> after getting this error Msg the sd-service crashing down
> The next step is to attach gdb to the bacula-sd process before it crashes and
> then get backtraces with "thread apply all bt".  You may need to recompile it
> with debugging options (CFLAGS="-g").
>
> __Martin
>
> ------------------------------------------------------------------------------
> Live Security Virtual Conference
> Exclusive live event will cover all the ways today's security and
> threat landscape has changed and how IT managers can respond. Discussions
> will include endpoint security, mobile security and the latest in malware
> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@...
> https://lists.sourceforge.net/lists/listinfo/bacula-users


-- 
# Stegbauer Datawork
# Tobias Dinse
# +49 (8571) 922213
# Oberjulbachring 9, 84387 Julbach

That's good, but unfortunately the backtrace doesn't show the function names.
Can you recompile bacula with debugging options (just set CFLAGS="-g" in the
environment before running configure).

Also, have you considered upgrading both Director and SD to 5.2.10?

__Martin


>>>>> On Mon, 23 Jul 2012 09:38:44 +0200, Tobias Dinse said:
> 
> Hi,
> 
> the Debug Informations are on the Attachment. It create it manually like 
> it was shown on the Bacula Homepage.
> 
> regards
> 
> Tobias
> 
> 
> Am 20.07.2012 20:11, schrieb Martin Simmons:
> >>>>>> On Fri, 20 Jul 2012 09:41:26 +0200, Tobias Dinse said:
> >> Syslog on sd:
> >>
> >> Jul 20 09:35:30 lx03-baculasd-ourcustomer bacula-sd: Bacula interrupted
> >> by signal 11: Segmentation violation
> >>
> >> after getting this error Msg the sd-service crashing down
> > The next step is to attach gdb to the bacula-sd process before it crashes and
> > then get backtraces with "thread apply all bt".  You may need to recompile it
> > with debugging options (CFLAGS="-g").
> >
> > __Martin
> >
> > ------------------------------------------------------------------------------
> > Live Security Virtual Conference
> > Exclusive live event will cover all the ways today's security and
> > threat landscape has changed and how IT managers can respond. Discussions
> > will include endpoint security, mobile security and the latest in malware
> > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> > _______________________________________________
> > Bacula-users mailing list
> > Bacula-users@...
> > https://lists.sourceforge.net/lists/listinfo/bacula-users
> 
> 
> -- 
> # Stegbauer Datawork
> # Tobias Dinse
> # +49 (8571) 922213
> # Oberjulbachring 9, 84387 Julbach

Ok, I compiled our 5.0.2 Version of Bacula and attached the new report. 
I hope this time its better  bu I can still see an ????.

I also tried to use 5.2.10 with 2 test machines. Both give the same 
error as 5.0.2 :(

regards

Tobias

Am 24.07.2012 19:45, schrieb Martin Simmons:
> That's good, but unfortunately the backtrace doesn't show the function names.
> Can you recompile bacula with debugging options (just set CFLAGS="-g" in the
> environment before running configure).
>
> Also, have you considered upgrading both Director and SD to 5.2.10?
>
> __Martin
>
>
>>>>>> On Mon, 23 Jul 2012 09:38:44 +0200, Tobias Dinse said:
>> Hi,
>>
>> the Debug Informations are on the Attachment. It create it manually like
>> it was shown on the Bacula Homepage.
>>
>> regards
>>
>> Tobias
>>
>>
>> Am 20.07.2012 20:11, schrieb Martin Simmons:
>>>>>>>> On Fri, 20 Jul 2012 09:41:26 +0200, Tobias Dinse said:
>>>> Syslog on sd:
>>>>
>>>> Jul 20 09:35:30 lx03-baculasd-ourcustomer bacula-sd: Bacula interrupted
>>>> by signal 11: Segmentation violation
>>>>
>>>> after getting this error Msg the sd-service crashing down
>>> The next step is to attach gdb to the bacula-sd process before it crashes and
>>> then get backtraces with "thread apply all bt".  You may need to recompile it
>>> with debugging options (CFLAGS="-g").
>>>
>>> __Martin
>>>
>>> ------------------------------------------------------------------------------
>>> Live Security Virtual Conference
>>> Exclusive live event will cover all the ways today's security and
>>> threat landscape has changed and how IT managers can respond. Discussions
>>> will include endpoint security, mobile security and the latest in malware
>>> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
>>> _______________________________________________
>>> Bacula-users mailing list
>>> Bacula-users@...
>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>
>> -- 
>> # Stegbauer Datawork
>> # Tobias Dinse
>> # +49 (8571) 922213
>> # Oberjulbachring 9, 84387 Julbach
> ------------------------------------------------------------------------------
> Live Security Virtual Conference
> Exclusive live event will cover all the ways today's security and
> threat landscape has changed and how IT managers can respond. Discussions
> will include endpoint security, mobile security and the latest in malware
> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@...
> https://lists.sourceforge.net/lists/listinfo/bacula-users


-- 
# Stegbauer Datawork
# Tobias Dinse
# +49 (8571) 922213
# Oberjulbachring 9, 84387 Julbach

On 7/25/2012 9:52 AM, Tobias Dinse wrote:
> Ok, I compiled our 5.0.2 Version of Bacula and attached the new 
> report. I hope this time its better  bu I can still see an ????.
>
> I also tried to use 5.2.10 with 2 test machines. Both give the same 
> error as 5.0.2 :(
>

Check the actual CFLAGS being used. The SIGSEGV may be due to glibc's 
buffer overrun protection being inadvertently turned on with the 
-DFORTIFY_SOURCE flag in CFLAGS.  This is particularly true if you are 
using a package builder rather than configure/make against the source 
tarball. At one time, bacula-sd caused a false positive hit of glibc's 
buffer overrun protection. I don't know if that is still the case, but 
it may well be.

Yes, that's better.

I think this can be caused by a mismatch between the Director or SD configs.

Can you post the Storage, Device and Autochanger sections from the
bacula-dir.conf and bacula-sd.conf?

__Martin


>>>>> On Wed, 25 Jul 2012 15:52:19 +0200, Tobias Dinse said:
> 
> Ok, I compiled our 5.0.2 Version of Bacula and attached the new report. 
> I hope this time its better  bu I can still see an ????.
> 
> I also tried to use 5.2.10 with 2 test machines. Both give the same 
> error as 5.0.2 :(
> 
> regards
> 
> Tobias
> 
> Am 24.07.2012 19:45, schrieb Martin Simmons:
> > That's good, but unfortunately the backtrace doesn't show the function names.
> > Can you recompile bacula with debugging options (just set CFLAGS="-g" in the
> > environment before running configure).
> >
> > Also, have you considered upgrading both Director and SD to 5.2.10?
> >
> > __Martin
> >
> >
> >>>>>> On Mon, 23 Jul 2012 09:38:44 +0200, Tobias Dinse said:
> >> Hi,
> >>
> >> the Debug Informations are on the Attachment. It create it manually like
> >> it was shown on the Bacula Homepage.
> >>
> >> regards
> >>
> >> Tobias
> >>
> >>
> >> Am 20.07.2012 20:11, schrieb Martin Simmons:
> >>>>>>>> On Fri, 20 Jul 2012 09:41:26 +0200, Tobias Dinse said:
> >>>> Syslog on sd:
> >>>>
> >>>> Jul 20 09:35:30 lx03-baculasd-ourcustomer bacula-sd: Bacula interrupted
> >>>> by signal 11: Segmentation violation
> >>>>
> >>>> after getting this error Msg the sd-service crashing down
> >>> The next step is to attach gdb to the bacula-sd process before it crashes and
> >>> then get backtraces with "thread apply all bt".  You may need to recompile it
> >>> with debugging options (CFLAGS="-g").
> >>>
> >>> __Martin
> >>>
> >>> ------------------------------------------------------------------------------
> >>> Live Security Virtual Conference
> >>> Exclusive live event will cover all the ways today's security and
> >>> threat landscape has changed and how IT managers can respond. Discussions
> >>> will include endpoint security, mobile security and the latest in malware
> >>> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> >>> _______________________________________________
> >>> Bacula-users mailing list
> >>> Bacula-users@...
> >>> https://lists.sourceforge.net/lists/listinfo/bacula-users
> >>
> >> -- 
> >> # Stegbauer Datawork
> >> # Tobias Dinse
> >> # +49 (8571) 922213
> >> # Oberjulbachring 9, 84387 Julbach
> > ------------------------------------------------------------------------------
> > Live Security Virtual Conference
> > Exclusive live event will cover all the ways today's security and
> > threat landscape has changed and how IT managers can respond. Discussions
> > will include endpoint security, mobile security and the latest in malware
> > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> > _______________________________________________
> > Bacula-users mailing list
> > Bacula-users@...
> > https://lists.sourceforge.net/lists/listinfo/bacula-users
> 
> 
> -- 
> # Stegbauer Datawork
> # Tobias Dinse
> # +49 (8571) 922213
> # Oberjulbachring 9, 84387 Julbach
> 
>

Ok, here are the parts of our Configuration Files.

Tobias

Am 26.07.2012 20:24, schrieb Martin Simmons:
> Yes, that's better.
>
> I think this can be caused by a mismatch between the Director or SD configs.
>
> Can you post the Storage, Device and Autochanger sections from the
> bacula-dir.conf and bacula-sd.conf?
>
> __Martin
>
>
>>>>>> On Wed, 25 Jul 2012 15:52:19 +0200, Tobias Dinse said:
>> Ok, I compiled our 5.0.2 Version of Bacula and attached the new report.
>> I hope this time its better  bu I can still see an ????.
>>
>> I also tried to use 5.2.10 with 2 test machines. Both give the same
>> error as 5.0.2 :(
>>
>> regards
>>
>> Tobias
>>
>> Am 24.07.2012 19:45, schrieb Martin Simmons:
>>> That's good, but unfortunately the backtrace doesn't show the function names.
>>> Can you recompile bacula with debugging options (just set CFLAGS="-g" in the
>>> environment before running configure).
>>>
>>> Also, have you considered upgrading both Director and SD to 5.2.10?
>>>
>>> __Martin
>>>
>>>
>>>>>>>> On Mon, 23 Jul 2012 09:38:44 +0200, Tobias Dinse said:
>>>> Hi,
>>>>
>>>> the Debug Informations are on the Attachment. It create it manually like
>>>> it was shown on the Bacula Homepage.
>>>>
>>>> regards
>>>>
>>>> Tobias
>>>>
>>>>
>>>> Am 20.07.2012 20:11, schrieb Martin Simmons:
>>>>>>>>>> On Fri, 20 Jul 2012 09:41:26 +0200, Tobias Dinse said:
>>>>>> Syslog on sd:
>>>>>>
>>>>>> Jul 20 09:35:30 lx03-baculasd-ourcustomer bacula-sd: Bacula interrupted
>>>>>> by signal 11: Segmentation violation
>>>>>>
>>>>>> after getting this error Msg the sd-service crashing down
>>>>> The next step is to attach gdb to the bacula-sd process before it crashes and
>>>>> then get backtraces with "thread apply all bt".  You may need to recompile it
>>>>> with debugging options (CFLAGS="-g").
>>>>>
>>>>> __Martin
>>>>>
>>>>> ------------------------------------------------------------------------------
>>>>> Live Security Virtual Conference
>>>>> Exclusive live event will cover all the ways today's security and
>>>>> threat landscape has changed and how IT managers can respond. Discussions
>>>>> will include endpoint security, mobile security and the latest in malware
>>>>> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
>>>>> _______________________________________________
>>>>> Bacula-users mailing list
>>>>> Bacula-users@...
>>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>> -- 
>>>> # Stegbauer Datawork
>>>> # Tobias Dinse
>>>> # +49 (8571) 922213
>>>> # Oberjulbachring 9, 84387 Julbach
>>> ------------------------------------------------------------------------------
>>> Live Security Virtual Conference
>>> Exclusive live event will cover all the ways today's security and
>>> threat landscape has changed and how IT managers can respond. Discussions
>>> will include endpoint security, mobile security and the latest in malware
>>> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
>>> _______________________________________________
>>> Bacula-users mailing list
>>> Bacula-users@...
>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>
>> -- 
>> # Stegbauer Datawork
>> # Tobias Dinse
>> # +49 (8571) 922213
>> # Oberjulbachring 9, 84387 Julbach
>>
>>
> ------------------------------------------------------------------------------
> Live Security Virtual Conference
> Exclusive live event will cover all the ways today's security and
> threat landscape has changed and how IT managers can respond. Discussions
> will include endpoint security, mobile security and the latest in malware
> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@...
> https://lists.sourceforge.net/lists/listinfo/bacula-users


-- 
# Stegbauer Datawork
# Tobias Dinse
# +49 (8571) 922213
# Oberjulbachring 9, 84387 Julbach

There is an inconsistency:

bacula-dir.conf: Autochanger = no
bacula-sd.conf: Autochanger = yes

I think you want Autochanger = no in the bacula-sd.conf because you're not
specifying an Autochanger resource.

__Martin


>>>>> On Fri, 27 Jul 2012 09:24:24 +0200, Tobias Dinse said:
> 
> Ok, here are the parts of our Configuration Files.
> 
> Tobias
> 
> Am 26.07.2012 20:24, schrieb Martin Simmons:
> > Yes, that's better.
> >
> > I think this can be caused by a mismatch between the Director or SD configs.
> >
> > Can you post the Storage, Device and Autochanger sections from the
> > bacula-dir.conf and bacula-sd.conf?
> >
> > __Martin
> >
> >
> >>>>>> On Wed, 25 Jul 2012 15:52:19 +0200, Tobias Dinse said:
> >> Ok, I compiled our 5.0.2 Version of Bacula and attached the new report.
> >> I hope this time its better  bu I can still see an ????.
> >>
> >> I also tried to use 5.2.10 with 2 test machines. Both give the same
> >> error as 5.0.2 :(
> >>
> >> regards
> >>
> >> Tobias
> >>
> >> Am 24.07.2012 19:45, schrieb Martin Simmons:
> >>> That's good, but unfortunately the backtrace doesn't show the function names.
> >>> Can you recompile bacula with debugging options (just set CFLAGS="-g" in the
> >>> environment before running configure).
> >>>
> >>> Also, have you considered upgrading both Director and SD to 5.2.10?
> >>>
> >>> __Martin
> >>>
> >>>
> >>>>>>>> On Mon, 23 Jul 2012 09:38:44 +0200, Tobias Dinse said:
> >>>> Hi,
> >>>>
> >>>> the Debug Informations are on the Attachment. It create it manually like
> >>>> it was shown on the Bacula Homepage.
> >>>>
> >>>> regards
> >>>>
> >>>> Tobias
> >>>>
> >>>>
> >>>> Am 20.07.2012 20:11, schrieb Martin Simmons:
> >>>>>>>>>> On Fri, 20 Jul 2012 09:41:26 +0200, Tobias Dinse said:
> >>>>>> Syslog on sd:
> >>>>>>
> >>>>>> Jul 20 09:35:30 lx03-baculasd-ourcustomer bacula-sd: Bacula interrupted
> >>>>>> by signal 11: Segmentation violation
> >>>>>>
> >>>>>> after getting this error Msg the sd-service crashing down
>>>>> The next step is to attach gdb to the bacula-sd process before it crashes and
>>>>> then get backtraces with "thread apply all bt".  You may need to recompile it
>>>>> with debugging options (CFLAGS="-g").
> >>>>>
>>>>> __Martin
> >>>>>
>>>>> ------------------------------------------------------------------------------
>>>>> Live Security Virtual Conference
>>>>> Exclusive live event will cover all the ways today's security and
>>>>> threat landscape has changed and how IT managers can respond. Discussions
>>>>> will include endpoint security, mobile security and the latest in malware
>>>>> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
>>>>> _______________________________________________
>>>>> Bacula-users mailing list
>>>>> Bacula-users@...
>>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
> >>>> -- 
> >>>> # Stegbauer Datawork
> >>>> # Tobias Dinse
> >>>> # +49 (8571) 922213
> >>>> # Oberjulbachring 9, 84387 Julbach
> >>> ------------------------------------------------------------------------------
> >>> Live Security Virtual Conference
> >>> Exclusive live event will cover all the ways today's security and
> >>> threat landscape has changed and how IT managers can respond. Discussions
> >>> will include endpoint security, mobile security and the latest in malware
> >>> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> >>> _______________________________________________
> >>> Bacula-users mailing list
> >>> Bacula-users@...
> >>> https://lists.sourceforge.net/lists/listinfo/bacula-users
> >>
> >> -- 
> >> # Stegbauer Datawork
> >> # Tobias Dinse
> >> # +49 (8571) 922213
> >> # Oberjulbachring 9, 84387 Julbach
> >>
> >>
> > ------------------------------------------------------------------------------
> > Live Security Virtual Conference
> > Exclusive live event will cover all the ways today's security and
> > threat landscape has changed and how IT managers can respond. Discussions
> > will include endpoint security, mobile security and the latest in malware
> > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> > _______________________________________________
> > Bacula-users mailing list
> > Bacula-users@...
> > https://lists.sourceforge.net/lists/listinfo/bacula-users
> 
> 
> -- 
> # Stegbauer Datawork
> # Tobias Dinse
> # +49 (8571) 922213
> # Oberjulbachring 9, 84387 Julbach