On Thu, Apr 7, 2011 at 5:33 PM, Jarod Wilson <jarod@...> wrote:
> On Apr 7, 2011, at 6:02 PM, D. Stark wrote:
> > Howdy:
> > I've got a Gentoo box running 2.6.36 along with lirc 0.9. Things "work",
> from an irw standpoint. However, dmesg is full of this:
> > mceusb 4-1:1.0: rx data: 84 83 02 81 07 (length=5)
> > mceusb 4-1:1.0: rx data: 84 82 06 82 04 (length=5)
> > mceusb 4-1:1.0: rx data: 84 88 1c 81 13 (length=5)
> > mceusb 4-1:1.0: rx data: 84 82 04 83 02 (length=5)
> > mceusb 4-1:1.0: rx data: 84 85 20 88 13 (length=5)
> > mceusb 4-1:1.0: rx data: 84 81 07 81 0b (length=5)
> > As you know, the mceusb receiver is damn sensitive, so there's a lot of
> hash going on even when I'm not pressing buttons. How do I get rid of it?
> Don't run the driver in debug mode?
> At least with the current mceusb code, that stuff comes from
> mceusb_dev_printdata(), which exits silently when you haven't
> enabled the debug param for the mceusb module.
> > And occasionally, depending which remote button I press (such as Play,
> clear, "the green button"), the PC speaker beeps. Are these two things
> possibly related?
> Jarod Wilson
SOLVED. Just sending this for posterity.
I did some digging. I found this towards the top of
/* module parameters */
static int debug = 1;
static int debug;
My problem was that CONFIG_USB_DEBUG=y was set in my .config. I disabled it,
recompiled, and all the chatter is gone--including the PC speaker beeps.
Thanks for pointing me in the right direct, Jarod.