Hello Jörg and list,
thank you for your help.
I installed the nvidia-260 package and created a nvidia-graphic card
device (I tried both 16 and 24 bit / with and without 3d acceleration).
I also went to http://xtiming.sourceforge.net/cgi-bin/xtiming.pl an
calculated this modline: "1920x1200@..." 210.68 1920 1952 2752 2784 1200
1224 1236 1261
Then I created monitor-device with a 1920x1200 resolution, a 60 Hz-refresh
rate and the modline above.
Now I assigend both devices to my Thinclient. After reboot the X-server
could not be startet (failed to load the nvidia-kernel-module...).
The box of the Zotac ZBox plus reads "next-genereation NVIDIA ION GPU
(with 512 MB ddr3 memory) - so the driver should be ok, right?
Any ideas?
Regards,
Peter
Von: Jörn Frenzel <j.frenzel@...>
An: openthinclient-user@...
Datum: 09.02.2011 21:55
Betreff: Re: [openthinclient-user] 1920x1200 resolution not working
Hello Peter,
as our colleague Daniel Vogel recently mentioned:
Please create a new device of type monitor and configure the modline
according to your needs. In your cases you should use:
"1920x1080@..." 182.28 1920 1952 2640 2672 1080 1102 1113 1135
Visit this site to calculate other modlines:
http://xtiming.sourceforge.net/cgi-bin/xtiming.pl
Please also install the package nvidia-260 to use ION-NG and set the type
of your grafic card to "nvidia".
Regards,
Jörn
--
openthinclient gmbh, Hirschstraße 29, DE-70173 Stuttgart
Amtsgericht Stuttgart: HRB 245 177; USt-ID: DE216017092
Geschäftsführer: Alexander Stecher, Martin Kreiner
http://openthinclient.com
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-
- - - - - - - - - - - - - - - - - - -
Hiermit laden wir Sie zu einem Besuch an unserem Stand auf der CeBIT ein.
Informieren Sie sich über die neue Version der openthinclient Software
Suite 1.0.
Sie finden uns in Halle 4 - Stand A04 (als Partner am BITKOM-Stand).
Für ein kostenloses Fachbesucherticket schreiben Sie uns bitte eine Email
an
cebit@....
Am 09.02.2011 10:26, schrieb P.Neumaier@...:
> Hello
>
> I'm new to Openthinclient but already like it a lot.
>
> My boss recently bought a ZOTAC ZBOX plus:
>
> - ATOM D525
> - Intel NM10 Express Chipset
> - 'Next-Generation NVIDIA ION GPU, 512 MB
>
> Screen: Nec 24" 1920x1200@...
>
> I tried to use Openthinclient to connect to a Citrix Presentation-Server
> using this machine. No matter what I try do to, I can't get the
1920x1200
> resolution working. All I got was 1600x1200.
>
> - I added the 'Monitor 1920x1200@... to my Thinclient
> - I tried the 'Graphics card: 24 Bit'-device
> - I tried the nv and the nvidia-driver
>
> Using Ubuntu 10.10 everything works fine. I know Openthinclient is based
on
> Ubuntu 6.06.... Is there any other thing I could try, or is my machine
too
> new for Openthinclient?
>
> Thank you for your help!
>
> Peter
>
>
>
>
------------------------------------------------------------------------------
> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio
XE:
> Pinpoint memory and threading errors before they happen.
> Find and fix more than 250 security defects in the development cycle.
> Locate bottlenecks in serial and parallel code that limit performance.
> http://p.sf.net/sfu/intel-dev2devfeb
>
>
>
> _______________________________________________
> The Open Source Thin Client Solution http://openthinclient.org
> openthinclient-user@...
> https://lists.sourceforge.net/lists/listinfo/openthinclient-user
------------------------------------------------------------------------------
The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE:
Pinpoint memory and threading errors before they happen.
Find and fix more than 250 security defects in the development cycle.
Locate bottlenecks in serial and parallel code that limit performance.
http://p.sf.net/sfu/intel-dev2devfeb
_______________________________________________
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@...
https://lists.sourceforge.net/lists/listinfo/openthinclient-user
|