Hi,
last week I bought a new Dell Inspiron 6400 and
smartmontools 5.37 under gentoo gives me very
high values in offline uncorrectable and Currently unreadable sectors.
Output of smartctl -a /dev/sda is appended.
I than run extended offline-test wich reported no errors
and also run Fujitsu ATA Diagnostic Tool 7.00 wich also
reported no erros.
Because all that I thought that this may is a problem
with smartmontools and some vendor-defined bytes like
discused in
http://sourceforge.net/mailarchive/message.php?msg_id=461E2518.8080006%40gmx.de
But because I can't find anything with google I think of asking
this mailing list if there is anything kown or if there is
anything I can do to verify these values before contacting support.
Thanks for your help
Carsten Böcker
output of smartctl -a /dev/sda:
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: FUJITSU MHY2160BH
Serial Number: K431T7B2607U
Firmware Version: 0085000B
User Capacity: 160.041.885.696 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Not recognized. Minor revision code: 0x42
Local Time is: Thu Dec 27 14:12:56 2007 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 649) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always
- 161755
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always
- 1
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 221
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always
- 8589934592000
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 3998
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 34
191 G-Sense_Error_Rate 0x0012 100 100 000 Old_age Always
- 3
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 4
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always
- 49 (Lifetime Min/Max 13/54)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 3771
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always
- 39678610374658
198 Offline_Uncorrectable 0x0032 100 100 000 Old_age Always
- 191714181906434
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always
- 1573862
200 Multi_Zone_Error_Rate 0x0032 100 100 000 Old_age Always
- 1417989
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 64
-
# 2 Extended offline Interrupted (host reset) 40% 62
-
# 3 Short offline Completed without error 00% 1
-
# 4 Short offline Completed without error 00% 0
-
# 5 Short offline Completed without error 00% 0
-
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|