A little more info,
I removed the additional USB3 cards and the same things occurs **UNLESS** I
plug the camera in to a USB2 port then it all works..?
So it seems that the problem is something USB3 related? The Nikon D800 has
USB3 support.
Thanks,
Richard
rsadams wrote:
>
> Hi Marcus,
>
> Thanks for the quick response.
>
> I have a Canon Rebel XSI in the office i'll try that tomorrow.
>
> The Kernel Version is : 3.2.0-23-generic
>
> I do have two of these installed, (which I'm now thinking might be a
> problem?)
>
> HighPoint 1144A 4-port USB 3.0 Card.
>
> This is the output from dmesg :
>
> [ 1.188756] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ
> 19
> [ 1.188791] ahci 0000:00:1f.2: irq 52 for MSI/MSI-X
> [ 1.202158] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps
> 0x22 impl SATA mode
> [ 1.202163] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum
> part ems apst
> [ 1.202168] ahci 0000:00:1f.2: setting latency timer to 64
> [ 1.210426] scsi0 : ahci
> [ 1.210472] scsi1 : ahci
> [ 1.210508] scsi2 : ahci
> [ 1.210544] scsi3 : ahci
> [ 1.210580] scsi4 : ahci
> [ 1.210615] scsi5 : ahci
> [ 1.210776] ata1: DUMMY
> [ 1.210778] ata2: SATA max UDMA/133 abar m2048@... port
> 0xf7f36180 irq 52
> [ 1.210779] ata3: DUMMY
> [ 1.210780] ata4: DUMMY
> [ 1.210780] ata5: DUMMY
> [ 1.210782] ata6: SATA max UDMA/133 abar m2048@... port
> 0xf7f36380 irq 52
> [ 1.210984] Fixed MDIO Bus: probed
> [ 1.210995] tun: Universal TUN/TAP device driver, 1.6
> [ 1.210996] tun: (C) 1999-2004 Max Krasnyansky <maxk@...>
> [ 1.211023] PPP generic driver version 2.4.2
> [ 1.211080] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 1.211090] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 1.211101] ehci_hcd 0000:00:1a.0: setting latency timer to 64
> [ 1.211103] ehci_hcd 0000:00:1a.0: EHCI Host Controller
> [ 1.211132] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
> number 1
> [ 1.211152] ehci_hcd 0000:00:1a.0: debug port 2
> [ 1.215040] ehci_hcd 0000:00:1a.0: cache line size of 64 is not
> supported
> [ 1.215051] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7f38000
> [ 1.230092] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> [ 1.230197] hub 1-0:1.0: USB hub found
> [ 1.230199] hub 1-0:1.0: 2 ports detected
> [ 1.230241] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) ->
> IRQ 23
> [ 1.230251] ehci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 1.230253] ehci_hcd 0000:00:1d.0: EHCI Host Controller
> [ 1.230280] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
> number 2
> [ 1.230296] ehci_hcd 0000:00:1d.0: debug port 2
> [ 1.234170] ehci_hcd 0000:00:1d.0: cache line size of 64 is not
> supported
> [ 1.234179] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7f37000
> [ 1.250053] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> [ 1.250148] hub 2-0:1.0: USB hub found
> [ 1.250150] hub 2-0:1.0: 2 ports detected
> [ 1.250188] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 1.250196] uhci_hcd: USB Universal Host Controller Interface driver
> [ 1.250214] xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 1.250235] xhci_hcd 0000:00:14.0: setting latency timer to 64
> [ 1.250237] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 1.250263] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
> number 3
> [ 1.250334] xhci_hcd 0000:00:14.0: cache line size of 64 is not
> supported
> [ 1.250337] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7f20000
> [ 1.250373] xhci_hcd 0000:00:14.0: irq 53 for MSI/MSI-X
> [ 1.250443] xHCI xhci_add_endpoint called for root hub
> [ 1.250444] xHCI xhci_check_bandwidth called for root hub
> [ 1.250457] hub 3-0:1.0: USB hub found
> [ 1.250462] hub 3-0:1.0: 4 ports detected
> [ 1.250501] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 1.250525] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
> number 4
> [ 1.250570] xHCI xhci_add_endpoint called for root hub
> [ 1.250571] xHCI xhci_check_bandwidth called for root hub
> [ 1.250584] hub 4-0:1.0: USB hub found
> [ 1.250589] hub 4-0:1.0: 4 ports detected
> [ 1.301968] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 18 (level, low) ->
> IRQ 18
> [ 1.301998] xhci_hcd 0000:04:00.0: setting latency timer to 64
> [ 1.302001] xhci_hcd 0000:04:00.0: xHCI Host Controller
> [ 1.302043] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus
> number 5
> [ 1.306407] xhci_hcd 0000:04:00.0: irq 18, io mem 0xf7c00000
> [ 1.306445] xhci_hcd 0000:04:00.0: irq 54 for MSI/MSI-X
> [ 1.306448] xhci_hcd 0000:04:00.0: irq 55 for MSI/MSI-X
> [ 1.306451] xhci_hcd 0000:04:00.0: irq 56 for MSI/MSI-X
> [ 1.306454] xhci_hcd 0000:04:00.0: irq 57 for MSI/MSI-X
> [ 1.306457] xhci_hcd 0000:04:00.0: irq 58 for MSI/MSI-X
> [ 1.306547] xHCI xhci_add_endpoint called for root hub
> [ 1.306548] xHCI xhci_check_bandwidth called for root hub
> [ 1.306563] hub 5-0:1.0: USB hub found
> [ 1.306567] hub 5-0:1.0: 2 ports detected
> [ 1.306600] xhci_hcd 0000:04:00.0: xHCI Host Controller
> [ 1.306625] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus
> number 6
> [ 1.306674] xHCI xhci_add_endpoint called for root hub
> [ 1.306675] xHCI xhci_check_bandwidth called for root hub
> [ 1.306689] hub 6-0:1.0: USB hub found
> [ 1.306693] hub 6-0:1.0: 2 ports detected
> [ 1.357865] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 18 (level, low) ->
> IRQ 18
> [ 1.357894] xhci_hcd 0000:05:00.0: setting latency timer to 64
> [ 1.357898] xhci_hcd 0000:05:00.0: xHCI Host Controller
> [ 1.357941] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus
> number 7
> [ 1.362304] xhci_hcd 0000:05:00.0: irq 18, io mem 0xf7b00000
> [ 1.362340] xhci_hcd 0000:05:00.0: irq 59 for MSI/MSI-X
> [ 1.362343] xhci_hcd 0000:05:00.0: irq 60 for MSI/MSI-X
> [ 1.362345] xhci_hcd 0000:05:00.0: irq 61 for MSI/MSI-X
> [ 1.362347] xhci_hcd 0000:05:00.0: irq 62 for MSI/MSI-X
> [ 1.362349] xhci_hcd 0000:05:00.0: irq 63 for MSI/MSI-X
> [ 1.362440] xHCI xhci_add_endpoint called for root hub
> [ 1.362441] xHCI xhci_check_bandwidth called for root hub
> [ 1.362455] hub 7-0:1.0: USB hub found
> [ 1.362460] hub 7-0:1.0: 2 ports detected
> [ 1.362495] xhci_hcd 0000:05:00.0: xHCI Host Controller
> [ 1.362519] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus
> number 8
> [ 1.362567] xHCI xhci_add_endpoint called for root hub
> [ 1.362568] xHCI xhci_check_bandwidth called for root hub
> [ 1.362582] hub 8-0:1.0: USB hub found
> [ 1.362586] hub 8-0:1.0: 2 ports detected
> [ 1.409771] xhci_hcd 0000:06:00.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 1.409800] xhci_hcd 0000:06:00.0: setting latency timer to 64
> [ 1.409804] xhci_hcd 0000:06:00.0: xHCI Host Controller
> [ 1.409843] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus
> number 9
> [ 1.414201] xhci_hcd 0000:06:00.0: irq 16, io mem 0xf7a00000
> [ 1.414236] xhci_hcd 0000:06:00.0: irq 64 for MSI/MSI-X
> [ 1.414238] xhci_hcd 0000:06:00.0: irq 65 for MSI/MSI-X
> [ 1.414241] xhci_hcd 0000:06:00.0: irq 66 for MSI/MSI-X
> [ 1.414243] xhci_hcd 0000:06:00.0: irq 67 for MSI/MSI-X
> [ 1.414245] xhci_hcd 0000:06:00.0: irq 68 for MSI/MSI-X
> [ 1.414332] xHCI xhci_add_endpoint called for root hub
> [ 1.414333] xHCI xhci_check_bandwidth called for root hub
> [ 1.414347] hub 9-0:1.0: USB hub found
> [ 1.414351] hub 9-0:1.0: 2 ports detected
> [ 1.414384] xhci_hcd 0000:06:00.0: xHCI Host Controller
> [ 1.414407] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus
> number 10
> [ 1.414456] xHCI xhci_add_endpoint called for root hub
> [ 1.414457] xHCI xhci_check_bandwidth called for root hub
> [ 1.414471] hub 10-0:1.0: USB hub found
> [ 1.414475] hub 10-0:1.0: 2 ports detected
> [ 1.449723] xhci_hcd 0000:07:00.0: PCI INT A -> GSI 18 (level, low) ->
> IRQ 18
> [ 1.449761] xhci_hcd 0000:07:00.0: setting latency timer to 64
> [ 1.449763] xhci_hcd 0000:07:00.0: xHCI Host Controller
> [ 1.449799] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus
> number 11
> [ 1.454175] xhci_hcd 0000:07:00.0: irq 18, io mem 0xf7900000
> [ 1.454212] xhci_hcd 0000:07:00.0: irq 69 for MSI/MSI-X
> [ 1.454215] xhci_hcd 0000:07:00.0: irq 70 for MSI/MSI-X
> [ 1.454217] xhci_hcd 0000:07:00.0: irq 71 for MSI/MSI-X
> [ 1.454219] xhci_hcd 0000:07:00.0: irq 72 for MSI/MSI-X
> [ 1.454221] xhci_hcd 0000:07:00.0: irq 73 for MSI/MSI-X
> [ 1.454314] xHCI xhci_add_endpoint called for root hub
> [ 1.454316] xHCI xhci_check_bandwidth called for root hub
> [ 1.454332] hub 11-0:1.0: USB hub found
> [ 1.454336] hub 11-0:1.0: 2 ports detected
> [ 1.454372] xhci_hcd 0000:07:00.0: xHCI Host Controller
> [ 1.454394] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus
> number 12
> [ 1.454445] xHCI xhci_add_endpoint called for root hub
> [ 1.454446] xHCI xhci_check_bandwidth called for root hub
> [ 1.454459] hub 12-0:1.0: USB hub found
> [ 1.454464] hub 12-0:1.0: 2 ports detected
> [ 1.513587] xhci_hcd 0000:0a:00.0: PCI INT A -> GSI 17 (level, low) ->
> IRQ 17
> [ 1.513621] xhci_hcd 0000:0a:00.0: setting latency timer to 64
> [ 1.513626] xhci_hcd 0000:0a:00.0: xHCI Host Controller
> [ 1.513658] xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus
> number 13
> [ 1.518077] xhci_hcd 0000:0a:00.0: irq 17, io mem 0xf7700000
> [ 1.518130] xhci_hcd 0000:0a:00.0: irq 74 for MSI/MSI-X
> [ 1.518132] xhci_hcd 0000:0a:00.0: irq 75 for MSI/MSI-X
> [ 1.518134] xhci_hcd 0000:0a:00.0: irq 76 for MSI/MSI-X
> [ 1.518137] xhci_hcd 0000:0a:00.0: irq 77 for MSI/MSI-X
> [ 1.518140] xhci_hcd 0000:0a:00.0: irq 78 for MSI/MSI-X
> [ 1.518259] xHCI xhci_add_endpoint called for root hub
> [ 1.518260] xHCI xhci_check_bandwidth called for root hub
> [ 1.518273] hub 13-0:1.0: USB hub found
> [ 1.518279] hub 13-0:1.0: 2 ports detected
> [ 1.518319] xhci_hcd 0000:0a:00.0: xHCI Host Controller
> [ 1.518342] xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus
> number 14
> [ 1.518396] xHCI xhci_add_endpoint called for root hub
> [ 1.518397] xHCI xhci_check_bandwidth called for root hub
> [ 1.518410] hub 14-0:1.0: USB hub found
> [ 1.518416] hub 14-0:1.0: 2 ports detected
> [ 1.529554] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 1.529576] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.529947] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND
> (20110623/psargs-359)
> [ 1.529954] ACPI Error: Method parse/execution failed
> [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880212769460), AE_NOT_FOUND
> (20110623/psparse-536)
> [ 1.530184] ata2.00: ATA-8: ST2000DM001-9YN164, CC4C, max UDMA/133
> [ 1.530188] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth
> 31/32), AA
> [ 1.530543] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND
> (20110623/psargs-359)
> [ 1.530549] ACPI Error: Method parse/execution failed
> [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880212769460), AE_NOT_FOUND
> (20110623/psparse-536)
> [ 1.530748] ata2.00: configured for UDMA/133
> [ 1.530843] scsi 1:0:0:0: Direct-Access ATA ST2000DM001-9YN1
> CC4C PQ: 0 ANSI: 5
> [ 1.530912] sd 1:0:0:0: Attached scsi generic sg0 type 0
> [ 1.530919] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00
> TB/1.81 TiB)
> [ 1.530921] sd 1:0:0:0: [sda] 4096-byte physical blocks
> [ 1.530976] sd 1:0:0:0: [sda] Write Protect is off
> [ 1.530978] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.530996] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1.531925] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND
> (20110623/psargs-359)
> [ 1.531931] ACPI Error: Method parse/execution failed
> [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff880212769640), AE_NOT_FOUND
> (20110623/psparse-536)
> [ 1.531942] ata6.00: ATAPI: ATAPI iHAS124 C, LL06, max UDMA/100
> [ 1.532787] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND
> (20110623/psargs-359)
> [ 1.532792] ACPI Error: Method parse/execution failed
> [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff880212769640), AE_NOT_FOUND
> (20110623/psparse-536)
> [ 1.532803] ata6.00: configured for UDMA/100
> [ 1.534811] scsi 5:0:0:0: CD-ROM ATAPI iHAS124 C
> LL06 PQ: 0 ANSI: 5
> [ 1.538621] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
> cdda tray
> [ 1.538624] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 1.538712] sr 5:0:0:0: Attached scsi CD-ROM sr0
> [ 1.538751] sr 5:0:0:0: Attached scsi generic sg1 type 5
> [ 1.541522] usb 1-1: new high-speed USB device number 2 using ehci_hcd
> [ 1.577397] sda: sda1 sda2 sda3 < sda5 sda6 >
> [ 1.577650] sd 1:0:0:0: [sda] Attached SCSI disk
> [ 1.581464] xhci_hcd 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) ->
> IRQ 17
> [ 1.581497] xhci_hcd 0000:0b:00.0: setting latency timer to 64
> [ 1.581502] xhci_hcd 0000:0b:00.0: xHCI Host Controller
> [ 1.581540] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus
> number 15
> [ 1.585957] xhci_hcd 0000:0b:00.0: irq 17, io mem 0xf7600000
> [ 1.586011] xhci_hcd 0000:0b:00.0: irq 79 for MSI/MSI-X
> [ 1.586013] xhci_hcd 0000:0b:00.0: irq 80 for MSI/MSI-X
> [ 1.586015] xhci_hcd 0000:0b:00.0: irq 81 for MSI/MSI-X
> [ 1.586017] xhci_hcd 0000:0b:00.0: irq 82 for MSI/MSI-X
> [ 1.586020] xhci_hcd 0000:0b:00.0: irq 83 for MSI/MSI-X
> [ 1.586140] xHCI xhci_add_endpoint called for root hub
> [ 1.586141] xHCI xhci_check_bandwidth called for root hub
> [ 1.586155] hub 15-0:1.0: USB hub found
> [ 1.586161] hub 15-0:1.0: 2 ports detected
> [ 1.586201] xhci_hcd 0000:0b:00.0: xHCI Host Controller
> [ 1.586223] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus
> number 16
> [ 1.586276] xHCI xhci_add_endpoint called for root hub
> [ 1.586277] xHCI xhci_check_bandwidth called for root hub
> [ 1.586290] hub 16-0:1.0: USB hub found
> [ 1.586296] hub 16-0:1.0: 2 ports detected
> [ 1.645344] xhci_hcd 0000:0c:00.0: PCI INT A -> GSI 19 (level, low) ->
> IRQ 19
> [ 1.645378] xhci_hcd 0000:0c:00.0: setting latency timer to 64
> [ 1.645383] xhci_hcd 0000:0c:00.0: xHCI Host Controller
> [ 1.645418] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus
> number 17
> [ 1.649838] xhci_hcd 0000:0c:00.0: irq 19, io mem 0xf7500000
> [ 1.649892] xhci_hcd 0000:0c:00.0: irq 84 for MSI/MSI-X
> [ 1.649894] xhci_hcd 0000:0c:00.0: irq 85 for MSI/MSI-X
> [ 1.649896] xhci_hcd 0000:0c:00.0: irq 86 for MSI/MSI-X
> [ 1.649898] xhci_hcd 0000:0c:00.0: irq 87 for MSI/MSI-X
> [ 1.649900] xhci_hcd 0000:0c:00.0: irq 88 for MSI/MSI-X
> [ 1.650020] xHCI xhci_add_endpoint called for root hub
> [ 1.650021] xHCI xhci_check_bandwidth called for root hub
> [ 1.650035] hub 17-0:1.0: USB hub found
> [ 1.650041] hub 17-0:1.0: 2 ports detected
> [ 1.650080] xhci_hcd 0000:0c:00.0: xHCI Host Controller
> [ 1.650099] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus
> number 18
> [ 1.650150] xHCI xhci_add_endpoint called for root hub
> [ 1.650151] xHCI xhci_check_bandwidth called for root hub
> [ 1.650165] hub 18-0:1.0: USB hub found
> [ 1.650171] hub 18-0:1.0: 2 ports detected
> [ 1.673792] hub 1-1:1.0: USB hub found
> [ 1.673886] hub 1-1:1.0: 6 ports detected
> [ 1.709227] xhci_hcd 0000:0d:00.0: PCI INT A -> GSI 17 (level, low) ->
> IRQ 17
> [ 1.709260] xhci_hcd 0000:0d:00.0: setting latency timer to 64
> [ 1.709265] xhci_hcd 0000:0d:00.0: xHCI Host Controller
> [ 1.709301] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus
> number 19
> [ 1.713717] xhci_hcd 0000:0d:00.0: irq 17, io mem 0xf7400000
> [ 1.713772] xhci_hcd 0000:0d:00.0: irq 89 for MSI/MSI-X
> [ 1.713774] xhci_hcd 0000:0d:00.0: irq 90 for MSI/MSI-X
> [ 1.713777] xhci_hcd 0000:0d:00.0: irq 91 for MSI/MSI-X
> [ 1.713779] xhci_hcd 0000:0d:00.0: irq 92 for MSI/MSI-X
> [ 1.713781] xhci_hcd 0000:0d:00.0: irq 93 for MSI/MSI-X
> [ 1.713900] xHCI xhci_add_endpoint called for root hub
> [ 1.713901] xHCI xhci_check_bandwidth called for root hub
> [ 1.713914] hub 19-0:1.0: USB hub found
> [ 1.713920] hub 19-0:1.0: 2 ports detected
> [ 1.713958] xhci_hcd 0000:0d:00.0: xHCI Host Controller
> [ 1.713980] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus
> number 20
> [ 1.714032] xHCI xhci_add_endpoint called for root hub
> [ 1.714033] xHCI xhci_check_bandwidth called for root hub
> [ 1.714048] hub 20-0:1.0: USB hub found
> [ 1.714054] hub 20-0:1.0: 2 ports detected
> [ 1.749184] xhci_hcd 0000:10:00.0: PCI INT A -> GSI 19 (level, low) ->
> IRQ 19
> [ 1.749218] xhci_hcd 0000:10:00.0: setting latency timer to 64
> [ 1.749221] xhci_hcd 0000:10:00.0: xHCI Host Controller
> [ 1.749253] xhci_hcd 0000:10:00.0: new USB bus registered, assigned bus
> number 21
> [ 1.785075] usb 2-1: new high-speed USB device number 2 using ehci_hcd
> [ 1.810269] xhci_hcd 0000:10:00.0: irq 19, io mem 0xf7e00000
> [ 1.810319] xhci_hcd 0000:10:00.0: irq 94 for MSI/MSI-X
> [ 1.810321] xhci_hcd 0000:10:00.0: irq 95 for MSI/MSI-X
> [ 1.810324] xhci_hcd 0000:10:00.0: irq 96 for MSI/MSI-X
> [ 1.810326] xhci_hcd 0000:10:00.0: irq 97 for MSI/MSI-X
> [ 1.810328] xhci_hcd 0000:10:00.0: irq 98 for MSI/MSI-X
> [ 1.810444] xHCI xhci_add_endpoint called for root hub
> [ 1.810445] xHCI xhci_check_bandwidth called for root hub
> [ 1.810461] hub 21-0:1.0: USB hub found
> [ 1.810467] hub 21-0:1.0: 2 ports detected
> [ 1.810505] xhci_hcd 0000:10:00.0: xHCI Host Controller
> [ 1.810529] xhci_hcd 0000:10:00.0: new USB bus registered, assigned bus
> number 22
> [ 1.810583] xHCI xhci_add_endpoint called for root hub
> [ 1.810584] xHCI xhci_check_bandwidth called for root hub
> [ 1.810598] hub 22-0:1.0: USB hub found
> [ 1.810603] hub 22-0:1.0: 2 ports detected
> [ 1.832989] Refined TSC clocksource calibration: 3116.252 MHz.
> [ 1.832993] Switching to clocksource tsc
> [ 1.845065] usbcore: registered new interface driver libusual
> [ 1.845089] i8042: PNP: No PS/2 controller found. Probing ports
> directly.
> [ 1.847356] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.847359] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 1.847423] mousedev: PS/2 mouse device common for all mice
> [ 1.847494] rtc_cmos 00:06: RTC can wake from S4
> [ 1.847572] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
> [ 1.847596] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet
> irqs
> [ 1.847639] device-mapper: uevent: version 1.0.3
> [ 1.847676] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
> initialised: dm-devel@...
> [ 1.847733] cpuidle: using governor ladder
> [ 1.847813] cpuidle: using governor menu
> [ 1.847814] EFI Variables Facility v0.08 2004-May-17
> [ 1.847918] TCP cubic registered
> [ 1.847973] NET: Registered protocol family 10
> [ 1.848209] NET: Registered protocol family 17
> [ 1.848218] Registering the dns_resolver key type
> [ 1.848365] PM: Hibernation image not present or could not be loaded.
> [ 1.848375] registered taskstats version 1
> [ 1.865000] Magic number: 0:186:593
> [ 1.865040] pci_bus 0000:10: hash matches
> [ 1.865119] rtc_cmos 00:06: setting system clock to 2012-06-18 17:33:49
> UTC (1340040829)
> [ 1.865631] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 1.865632] EDD information not available.
> [ 1.866702] Freeing unused kernel memory: 920k freed
> [ 1.866779] Write protecting the kernel read-only data: 12288k
> [ 1.869541] Freeing unused kernel memory: 1608k freed
> [ 1.871679] Freeing unused kernel memory: 1196k freed
> [ 1.880261] udevd[116]: starting version 175
> [ 1.903196] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
> [ 1.903197] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
> [ 1.903220] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) ->
> IRQ 20
> [ 1.903227] e1000e 0000:00:19.0: setting latency timer to 64
> [ 1.903313] e1000e 0000:00:19.0: irq 99 for MSI/MSI-X
> [ 1.917478] hub 2-1:1.0: USB hub found
> [ 1.917560] hub 2-1:1.0: 8 ports detected
> [ 1.988849] usb 1-1.5: new low-speed USB device number 3 using ehci_hcd
> [ 2.089187] input: Genius Optical Mouse as
> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input2
> [ 2.089318] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID
> v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1a.0-1.5/input0
> [ 2.089325] usbcore: registered new interface driver usbhid
> [ 2.089326] usbhid: USB HID core driver
> [ 2.156540] usb 1-1.6: new low-speed USB device number 4 using ehci_hcd
> [ 2.203000] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1)
> c8:60:00:8a:5a:05
> [ 2.203002] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network
> Connection
> [ 2.203032] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No:
> FFFFFF-0FF
> [ 2.247257] EXT4-fs (sda5): INFO: recovery required on readonly
> filesystem
> [ 2.247259] EXT4-fs (sda5): write access will be enabled during
> recovery
> [ 2.277351] input: USB Keyboard as
> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input3
> [ 2.277509] generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID
> v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1a.0-1.6/input0
> [ 2.294441] input: USB Keyboard as
> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input4
> [ 2.294553] generic-usb 0003:04D9:1603.0003: input,hidraw2: USB HID
> v1.10 Device [ USB Keyboard] on usb-0000:00:1a.0-1.6/input1
> [ 2.407302] usb 22-1: new SuperSpeed USB device number 2 using xhci_hcd
> [ 3.356210] EXT4-fs (sda5): recovery complete
> [ 3.356571] EXT4-fs (sda5): mounted filesystem with ordered data mode.
> Opts: (null)
> [ 8.001762] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 8.029243] udevd[363]: starting version 175
> [ 8.058638] mei: module is from the staging directory, the quality is
> unknown, you have been warned.
> [ 8.058804] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ
> 16
> [ 8.058809] mei 0000:00:16.0: setting latency timer to 64
> [ 8.058855] mei 0000:00:16.0: irq 100 for MSI/MSI-X
> [ 8.059803] lp: driver loaded but no devices found
> [ 8.064084] [drm] Initialized drm 1.1.0 20060810
> [ 8.068431] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ
> 16
> [ 8.068434] i915 0000:00:02.0: setting latency timer to 64
> [ 8.068678] wmi: Mapper loaded
> [ 8.087129] type=1400 audit(1340037235.728:2): apparmor="STATUS"
> operation="profile_load" name="/sbin/dhclient" pid=426
> comm="apparmor_parser"
> [ 8.087338] type=1400 audit(1340037235.728:3): apparmor="STATUS"
> operation="profile_load"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=426
> comm="apparmor_parser"
> [ 8.087458] type=1400 audit(1340037235.728:4): apparmor="STATUS"
> operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script"
> pid=426 comm="apparmor_parser"
> [ 8.088525] Adding 8206332k swap on /dev/sda6. Priority:-1 extents:1
> across:8206332k
> [ 8.119367] i915 0000:00:02.0: irq 101 for MSI/MSI-X
> [ 8.119370] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> [ 8.119371] [drm] Driver supports precise vblank timestamp query.
> [ 8.119844] vgaarb: device changed decodes:
> PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 8.148283] asus_wmi: ASUS WMI generic driver loaded
> [ 8.148578] asus_wmi: Initialization: 0x0
> [ 8.148590] asus_wmi: BIOS WMI version: 0.9
> [ 8.148610] asus_wmi: SFUN value: 0x0
> [ 8.149417] input: Eee PC WMI hotkeys as
> /devices/platform/eeepc-wmi/input/input5
> [ 8.150058] asus_wmi: Backlight controlled by ACPI video driver
> [ 8.522464] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
> [ 8.540418] init: failsafe main process (788) killed by TERM signal
> [ 8.574480] fbcon: inteldrmfb (fb0) is primary device
> [ 8.574545] Console: switching to colour frame buffer device 240x67
> [ 8.574563] fb0: inteldrmfb frame buffer device
> [ 8.574564] drm: registered panic notifier
> [ 8.592887] acpi device:4a: registered as cooling_device9
> [ 8.592999] input: Video Bus as
> /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
> [ 8.593033] ACPI: Video Device [GFX0] (multi-head: yes rom: no post:
> no)
> [ 8.593063] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
> minor 0
> [ 8.593097] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
> low) -> IRQ 22
> [ 8.593143] snd_hda_intel 0000:00:1b.0: irq 102 for MSI/MSI-X
> [ 8.593165] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
> [ 8.684961] ppdev: user-space parallel port driver
> [ 8.694246] Bluetooth: Core ver 2.16
> [ 8.694257] NET: Registered protocol family 31
> [ 8.694258] Bluetooth: HCI device and connection manager initialized
> [ 8.694259] Bluetooth: HCI socket layer initialized
> [ 8.694260] Bluetooth: L2CAP socket layer initialized
> [ 8.694262] Bluetooth: SCO socket layer initialized
> [ 8.694854] type=1400 audit(1340037236.336:5): apparmor="STATUS"
> operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=860
> comm="apparmor_parser"
> [ 8.695184] type=1400 audit(1340037236.336:6): apparmor="STATUS"
> operation="profile_load" name="/usr/sbin/cupsd" pid=860
> comm="apparmor_parser"
> [ 8.695258] Bluetooth: RFCOMM TTY layer initialized
> [ 8.695260] Bluetooth: RFCOMM socket layer initialized
> [ 8.695261] Bluetooth: RFCOMM ver 1.11
> [ 8.713603] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 8.713604] Bluetooth: BNEP filters: protocol multicast
> [ 8.981201] e1000e 0000:00:19.0: irq 99 for MSI/MSI-X
> [ 9.035903] e1000e 0000:00:19.0: irq 99 for MSI/MSI-X
> [ 9.036316] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 9.036447] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 9.139329] type=1400 audit(1340037236.780:7): apparmor="STATUS"
> operation="profile_load"
> name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=902
> comm="apparmor_parser"
> [ 9.139457] type=1400 audit(1340037236.780:8): apparmor="STATUS"
> operation="profile_replace" name="/sbin/dhclient" pid=903
> comm="apparmor_parser"
> [ 9.139684] type=1400 audit(1340037236.784:9): apparmor="STATUS"
> operation="profile_replace"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=903
> comm="apparmor_parser"
> [ 9.139804] type=1400 audit(1340037236.784:10): apparmor="STATUS"
> operation="profile_replace"
> name="/usr/lib/connman/scripts/dhclient-script" pid=903
> comm="apparmor_parser"
> [ 9.140167] type=1400 audit(1340037236.784:11): apparmor="STATUS"
> operation="profile_load" name="/usr/lib/telepathy/mission-control-5"
> pid=906 comm="apparmor_parser"
> [ 9.153422] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
> [ 9.153470] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
> [ 9.153515] input: HDA Intel PCH HDMI/DP,pcm=7 as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
> [ 9.153603] input: HDA Intel PCH HDMI/DP,pcm=3 as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
> [ 9.153692] input: HDA Intel PCH Line as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
> [ 9.153777] input: HDA Intel PCH Front Mic as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
> [ 9.153853] input: HDA Intel PCH Rear Mic as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> [ 9.153926] input: HDA Intel PCH Front Headphone as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> [ 9.153981] input: HDA Intel PCH Line-Out Side as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
> [ 9.154042] input: HDA Intel PCH Line-Out CLFE as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
> [ 9.154084] input: HDA Intel PCH Line-Out Surround as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
> [ 9.154132] input: HDA Intel PCH Line-Out Front as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
> [ 12.662869] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
> Control: Rx/Tx
> [ 12.663238] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 23.006595] eth0: no IPv6 routers present
> [ 32.146420] audit_printk_skb: 36 callbacks suppressed
> [ 32.146422] type=1400 audit(1340037259.827:24): apparmor="DENIED"
> operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5"
> name="/usr/share/gvfs/remote-volume-monitors/" pid=2202
> comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000
> ouid=0
> [ 41.474103] usb 22-1: USB disconnect, device number 2
> [ 42.076752] usb 22-1: new SuperSpeed USB device number 3 using xhci_hcd
> [ 54.129327] usb 22-1: USB disconnect, device number 3
> [ 54.731871] usb 22-1: new SuperSpeed USB device number 4 using xhci_hcd
> [ 69.161345] usb 22-1: USB disconnect, device number 4
> [ 69.764002] usb 22-1: new SuperSpeed USB device number 5 using xhci_hcd
> [ 101.294728] usb 22-1: USB disconnect, device number 5
> [ 104.613729] usb 22-1: new SuperSpeed USB device number 6 using xhci_hcd
> [ 164.310998] usb 22-1: USB disconnect, device number 6
> [ 164.909599] usb 22-1: new SuperSpeed USB device number 7 using xhci_hcd
> [ 173.418926] usb 22-1: USB disconnect, device number 7
> [ 174.021490] usb 22-1: new SuperSpeed USB device number 8 using xhci_hcd
> [ 182.698603] usb 22-1: USB disconnect, device number 8
> [ 186.253235] usb 22-1: new SuperSpeed USB device number 9 using xhci_hcd
> [ 194.986289] usb 22-1: USB disconnect, device number 9
> [ 195.584923] usb 22-1: new SuperSpeed USB device number 10 using
> xhci_hcd
> [ 202.112819] usb 22-1: USB disconnect, device number 10
> [ 205.839276] usb 22-1: new SuperSpeed USB device number 11 using
> xhci_hcd
> [ 283.408871] usb 22-1: USB disconnect, device number 11
> [ 284.011435] usb 22-1: new SuperSpeed USB device number 12 using
> xhci_hcd
> [ 284.878915] usb 22-1: USB disconnect, device number 12
> [ 285.481547] usb 22-1: new SuperSpeed USB device number 13 using
> xhci_hcd
> [ 287.783059] usb 22-1: USB disconnect, device number 13
> [ 292.799798] usb 22-1: new SuperSpeed USB device number 14 using
> xhci_hcd
> [ 580.901805] usb 22-1: USB disconnect, device number 14
> [ 581.504455] usb 22-1: new SuperSpeed USB device number 15 using
> xhci_hcd
> [ 588.851290] usb 22-1: USB disconnect, device number 15
> [ 593.105052] usb 22-1: new SuperSpeed USB device number 16 using
> xhci_hcd
> [ 596.449176] usb 22-1: USB disconnect, device number 16
> [ 597.051811] usb 22-1: new SuperSpeed USB device number 17 using
> xhci_hcd
> [ 698.297951] usb 22-1: USB disconnect, device number 17
> [ 698.896572] usb 22-1: new SuperSpeed USB device number 18 using
> xhci_hcd
> [ 700.095573] usb 22-1: USB disconnect, device number 18
> [ 703.414589] usb 22-1: new SuperSpeed USB device number 19 using
> xhci_hcd
> [ 817.279946] usb 22-1: USB disconnect, device number 19
> [ 817.878571] usb 22-1: new SuperSpeed USB device number 20 using
> xhci_hcd
> [ 1052.963251] usb 22-1: USB disconnect, device number 20
> [ 1053.565586] usb 22-1: new SuperSpeed USB device number 21 using
> xhci_hcd
> [ 1054.927660] usb 22-1: USB disconnect, device number 21
> [ 1058.197112] usb 22-1: new SuperSpeed USB device number 22 using
> xhci_hcd
> [ 1065.995418] usb 22-1: USB disconnect, device number 22
> [ 1066.597746] usb 22-1: new SuperSpeed USB device number 23 using
> xhci_hcd
> [ 1085.727306] usb 22-1: USB disconnect, device number 23
> [ 1086.329679] usb 22-1: new SuperSpeed USB device number 24 using
> xhci_hcd
> [ 1113.145206] usb 22-1: USB disconnect, device number 24
> [ 1113.747519] usb 22-1: new SuperSpeed USB device number 25 using
> xhci_hcd
> [ 1810.589690] usb 22-1: USB disconnect, device number 25
> [ 1811.191957] usb 22-1: new SuperSpeed USB device number 26 using
> xhci_hcd
> [ 1813.612188] usb 22-1: USB disconnect, device number 26
> [ 1816.346597] usb 22-1: new SuperSpeed USB device number 27 using
> xhci_hcd
> [ 1821.697372] usb 22-1: USB disconnect, device number 27
> [ 1822.295674] usb 22-1: new SuperSpeed USB device number 28 using
> xhci_hcd
> [ 1826.065407] usb 22-1: USB disconnect, device number 28
> [ 4103.392020] usb 22-1: new SuperSpeed USB device number 29 using
> xhci_hcd
> [ 4108.087968] usb 22-1: USB disconnect, device number 29
> [ 4108.690261] usb 22-1: new SuperSpeed USB device number 30 using
> xhci_hcd
> [ 4110.679261] usb 22-1: USB disconnect, device number 30
> [ 4111.281586] usb 22-1: new SuperSpeed USB device number 31 using
> xhci_hcd
> [ 4120.373504] usb 22-1: USB disconnect, device number 31
> [ 4120.975861] usb 22-1: new SuperSpeed USB device number 32 using
> xhci_hcd
> [ 4350.512621] usb 22-1: USB disconnect, device number 32
> [ 4351.114980] usb 22-1: new SuperSpeed USB device number 33 using
> xhci_hcd
> [ 4352.213534] usb 22-1: USB disconnect, device number 33
> [ 4354.832157] usb 22-1: new SuperSpeed USB device number 34 using
> xhci_hcd
> [ 4365.313555] usb 22-1: USB disconnect, device number 34
> [ 4367.377217] usb 22-1: new SuperSpeed USB device number 35 using
> xhci_hcd
> [ 4417.294517] usb 22-1: USB disconnect, device number 35
> [ 4417.896825] usb 22-1: new SuperSpeed USB device number 36 using
> xhci_hcd
> [ 4420.097361] usb 22-1: USB disconnect, device number 36
> [ 4420.699601] usb 22-1: new SuperSpeed USB device number 37 using
> xhci_hcd
> [ 4422.153625] usb 22-1: USB disconnect, device number 37
> [ 4426.109830] usb 22-1: new SuperSpeed USB device number 38 using
> xhci_hcd
> [ 4436.271784] usb 22-1: USB disconnect, device number 38
> [ 4436.874140] usb 22-1: new SuperSpeed USB device number 39 using
> xhci_hcd
> [ 4438.268155] usb 22-1: USB disconnect, device number 39
> [ 4442.895129] usb 22-1: new SuperSpeed USB device number 40 using
> xhci_hcd
> [ 4455.233102] usb 22-1: USB disconnect, device number 40
> [ 4455.835420] usb 22-1: new SuperSpeed USB device number 41 using
> xhci_hcd
> [ 6542.867225] usb 22-1: USB disconnect, device number 41
> [ 6543.469555] usb 22-1: new SuperSpeed USB device number 42 using
> xhci_hcd
> [ 6545.514377] usb 22-1: USB disconnect, device number 42
> [ 6550.313035] usb 22-1: new SuperSpeed USB device number 43 using
> xhci_hcd
> [ 6555.651814] usb 22-1: USB disconnect, device number 43
> [ 6556.254170] usb 22-1: new SuperSpeed USB device number 44 using
> xhci_hcd
> [ 6612.200395] usb 22-1: USB disconnect, device number 44
> [ 6612.802761] usb 22-1: new SuperSpeed USB device number 45 using
> xhci_hcd
> [ 6648.837394] usb 22-1: USB disconnect, device number 45
> [ 6649.439750] usb 22-1: new SuperSpeed USB device number 46 using
> xhci_hcd
> [ 7405.262025] usb 22-1: USB disconnect, device number 46
> [ 7405.864364] usb 22-1: new SuperSpeed USB device number 47 using
> xhci_hcd
> [ 7408.619888] usb 22-1: USB disconnect, device number 47
> [ 7414.101307] usb 22-1: new SuperSpeed USB device number 48 using
> xhci_hcd
> [ 7420.086919] usb 22-1: USB disconnect, device number 48
> [ 7420.689245] usb 22-1: new SuperSpeed USB device number 49 using
> xhci_hcd
> [ 7432.436340] usb 22-1: USB disconnect, device number 49
> [ 7433.038688] usb 22-1: new SuperSpeed USB device number 50 using
> xhci_hcd
> [ 7459.391063] usb 22-1: USB disconnect, device number 50
> [ 7459.989380] usb 22-1: new SuperSpeed USB device number 51 using
> xhci_hcd
> [ 9487.262420] usb 22-1: USB disconnect, device number 51
> [15810.769205] usb 22-1: new SuperSpeed USB device number 52 using
> xhci_hcd
> [15820.484086] usb 22-1: USB disconnect, device number 52
> [15821.082378] usb 22-1: new SuperSpeed USB device number 53 using
> xhci_hcd
>
>
> Marcus Meissner wrote:
>>
>> On Mon, Jun 18, 2012 at 12:11:21PM -0700, rsadams wrote:
>>>
>>> Hello All,
>>>
>>> I have a Nikon D800 and gphoto2 2.4.14. The first time I issue a
>>> command
>>> (any command) it's successful. *Any* second command reports the
>>> following
>>> error. Switching the camera off and on again fixes the problem, again
>>> only
>>> for the first command.
>>>
>>> I followed a web post and used:
>>>
>>> killall gvfsd-gphoto2 gvfs-gphoto2-volume-monitor
>>>
>>> But this makes no difference..
>>
>>> *** Error ***
>>> An error occurred in the io-library ('Unspecified error'): Could not
>>> release
>>> interface 0 (No such device).
>>> *** Error (-1: 'Unspecified error') ***
>>
>> This should not happen...
>>
>> Which Linux kernel version do you use?
>> Any interesting things in "dmesg" output?
>> Do you have another camera or computer to cross check the behaviour, e.g.
>> if it happens
>> for other cameras?
>>
>> Ciao, Marcus
>>
>> ------------------------------------------------------------------------------
>> Live Security Virtual Conference
>> Exclusive live event will cover all the ways today's security and
>> threat landscape has changed and how IT managers can respond. Discussions
>> will include endpoint security, mobile security and the latest in malware
>> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
>> _______________________________________________
>> Gphoto-devel mailing list
>> Gphoto-devel@...
>> https://lists.sourceforge.net/lists/listinfo/gphoto-devel
>>
>>
>
>
--
View this message in context: http://old.nabble.com/NikonD800-locks-after-first-access.-Log-included.-tp34032300p34033288.html
Sent from the gphoto-devel mailing list archive at Nabble.com.
|