Quite Universal Circuit Simulator

OK, this is what I want to achieve: I want to plot 20*log(Vout/Vin), where=
=20
Vout is the tension at the right of the C and Vin is V1+

=BFHow can I achieve this?

Regards, Lisandro.


=2D-=20
Ud. est=E1 viendo a la persona que ven nuestros clientes.
 Leyenda pegada en el espejo de una empresa.

Lisandro Dami=E1n Nicanor P=E9rez Meyer
http://perezmeyer.com.ar/

Re: [Qucs-help] Transfer function From: Lisandro <perezmeyer@gm...> - 2007-03-15 17:31 Attachments: pasabajos.dat      pasabajos.dpl      El Jueves 15 Marzo 2007 14:26, Lisandro Dami=E1n Nicanor P=E9rez Meyer escr= ibi=F3: > OK, this is what I want to achieve: I want to plot 20*log(Vout/Vin), where > Vout is the tension at the right of the C and Vin is V1+ > > =BFHow can I achieve this? > > Regards, Lisandro. I add the rest of the related data =2D-=20 The POP3 server service depends on the SMTP server service, which failed to start because of the following error: The operation completed successfully. -- Windows NT Server v3.51 Lisandro Dami=E1n Nicanor P=E9rez Meyer http://perezmeyer.com.ar/

Re: [Qucs-help] Transfer function From: Stefan Jahn <stefan@gr...> - 2007-03-15 17:38 Attachments: pasabajos.sch      pasabajos.dpl      Am Do, 15.03.2007, 18:26, schrieb Lisandro Damián Nicanor Pérez Meyer: Hello Lisandro, > OK, this is what I want to achieve: I want to plot 20*log(Vout/Vin), where > Vout is the tension at the right of the C and Vin is V1+ > > ¿How can I achieve this? Attached how it works. If you want to have a node voltage to be visible in the diagram dialogs you need to name them. That is done by double-clicking wires. In equations you can compute whatever you want to display... Hope this helps, Stefan.

Re: [Qucs-help] Transfer function From: Stefan Jahn <stefan@gr...> - 2007-03-15 17:42 Am Do, 15.03.2007, 18:31, schrieb Lisandro Damián Nicanor Pérez Meyer: Hi again! >> OK, this is what I want to achieve: I want to plot 20*log(Vout/Vin), >> where >> Vout is the tension at the right of the C and Vin is V1+ >> >> ¿How can I achieve this? >> >> Regards, Lisandro. > > I add the rest of the related data You cannot put equations into the diagram. That's why it did not work. Anyway, see my previous mail... Cheers, Stefan.

Re: [Qucs-help] Transfer function From: Lisandro <perezmeyer@gm...> - 2007-03-16 02:20 El Jueves 15 Marzo 2007 14:41, escribi=F3: > Am Do, 15.03.2007, 18:31, schrieb Lisandro Dami=E1n Nicanor P=E9rez Meyer: > > Hi again! > > >> OK, this is what I want to achieve: I want to plot 20*log(Vout/Vin), > >> where > >> Vout is the tension at the right of the C and Vin is V1+ > >> > >> =BFHow can I achieve this? > >> > >> Regards, Lisandro. > > > > I add the rest of the related data > > You cannot put equations into the diagram. That's why it did > not work. > > Anyway, see my previous mail... > > Cheers, Stefan. Great, it worked! I'll comment all the steps ASAP, if possible I'll make aa= n=20 html out of it Thanks!!!! =2D-=20 I still maintain the point that designing a monolithic kernel in 1991 is a fundamental error. Be thankful you are not my student. You would not get a high grade for such a design :-) (Andrew Tanenbaum to Linus Torvalds) Lisandro Dami=E1n Nicanor P=E9rez Meyer http://perezmeyer.com.ar/

379 messages have been excluded from this view by a project administrator.