On Thursday 19 May 2005 06:39 pm, Sebastian Weitzel wrote:
> Zitat von John Clark <jclark@...>:
> > Could you post your tool, while my analyzer only goes up to 2.7 Ghz,
> > I do need to look at various power controls.
> I attached a patch for madwifi-bsd to filter for the test mac and a
> small c file to send the test patterns. Just add the athrawsend.c to
> the madwifi/tools dir and to the Makefile.
unfortunately the link in your May 19 email is broken. It would be nice if you
could activate it again.
I would like to do spectrum analyzer measurement in frequency band up to
5.7Ghz with a Wistron Neweb miniPCI card and need to bring the card into the
test mode. After doing the measurements I will post the results to the list.
> To activate test mode for 11g, Channel 5:
> echo 2 > /proc/sys/dev/athX/rawdev_type
> echo 1 > /proc/sys/dev/athX/rawdev_type
> iwpriv athX mode 3
> iwconfig athX channel 5
> ifconfig athX up
> ifconfig athXraw up
> athrawsend -h