Did you modify the startup script in /usr/bin/gramps? The menu should
just call it. if you're not sure, open a terminal and type"
which gramps
to see where it's coming from
On Wed, May 13, 2009 at 12:58 PM, Dianne Reuby <pramclub@...> wrote:
> Seems it will only load from terminal - if I use the menu, it still has
> the problem.
>
> Dianne
>
> On Tue, 2009-05-12 at 20:23 +0200, Jérôme wrote:
>> https://bugs.edge.launchpad.net/ubuntu/+source/gtkspell/+bug/120569
>> this was an old bug (I hope this should be fixed on 9.04 !)
>>
>> Seems you don't have installed hebrew hspell, but this is just a warning
>> (spell is used on Note Editor as an option)
>> I just find strange that Gramps loads Mozilla xulrunner libs :
>> /usr/lib/xulrunner-1.9.0.10/libxpcom.so
>>
>> True, some people have segmentation faults under Ubuntu-9.04 with
>> 8.10.deb package. http://www.gramps-project.org/bugs/view.php?id=2901
>>
>> Sometimes, this might be fixed by using a modified launcher.
>> Modifying the startup script in /usr/bin/gramps :
>>
>> exec /usr/bin/python $GRAMPSDIR/gramps.py "$@"
>> to:
>> exec /usr/bin/python2.5 -O $GRAMPSDIR/gramps.py "$@"
>>
>>
>>
>>
>> Maybe I need to compile Gramps-3.1.1 under Ubuntu-9.04, because I do not
>> segfaults by using sources !
>>
>>
>>
>> Jérôme
>>
>>
>> Dianne Reuby a écrit :
>> > Thanks. I got the following messages, and it opened with a locked
>> > database:
>> > Hspell: can't open /usr/share/hspell/hebrew.wgz.sizes.
>> > Hspell: can't open /usr/share/hspell/hebrew.wgz.sizes.
>> > location: /usr/lib/xulrunner-1.9.0.10/libxpcom.so
>> > before 3
>> > Database is locked, cannot open it!
>> > Info: Locked by dianne@...
>> >
>> > I unlocked, and it loaded, then closed, and gave me a segmentation
>> > fault. Is it this bug?
>> > https://bugs.edge.launchpad.net/ubuntu/+source/gtkspell/+bug/120569
>> >
>> > Thanks,
>> > Dianne
>> >
>> > On Tue, 2009-05-12 at 19:34 +0200, Jérôme wrote:
>> >> Hello,
>> >>
>> >>
>> >> And no messages on console (i.e : $ gramps) ?
>> >> http://www.gramps-project.org/wiki/index.php?title=Gramps_3.1_Wiki_Manual_-_Getting_Started#To_Start_GRAMPS
>> >>
>> >> As gramps-3.1.1.deb package is not available for 9.04, I suppose the
>> >> best way is to try a compilation !
>> >> http://www.gramps-project.org/wiki/index.php?title=Installation#Installing_from_source
>> >>
>> >>
>> >> Jérôme
>> >>
>> >>
>> >> Dianne Reuby a écrit :
>> >>> I've removed 3.1.1 and reinstalled (using the same .deb package for
>> >>> 8.10) but it hasn't solved the problem.
>> >>>
>> >>> Dianne
>> >>>
>> >>> On Mon, 2009-05-11 at 09:20 +0100, Dianne Reuby wrote:
>> >>>> I used Gramps last night, closed with no problems, took a backup, and
>> >>>> shut down. I was correcting all those names where the surname had been
>> >>>> entered as dashes - quite a lot of changes to "People".
>> >>>>
>> >>>> This morning it doesn't load. I get the "gramps is loading" label in the
>> >>>> panel, and the throbber, then they both vanish and nothing happens. The
>> >>>> first time I thought I hadn't clicked on the menu correctly, so I
>> >>>> clicked again, and it did load, but with the database locked. I rebooted
>> >>>> and tried again, but now I just get the "gramps loading" label and then
>> >>>> nothing.
>> >>>>
>> >>>> I've checked the wiki, but I don't have assistive technologies enabled
>> >>>> (known issues) and I was careful to remove the older version before
>> >>>> installing this one (common problems).
>> >>>>
>> >>>> As I have a backup, I could do a clean install and restore, but I
>> >>>> thought I'd see if there was a less drastic solution.
>> >>>>
>> >>>> I'm using 3.1.1 on Ubuntu 9.04
>> >>>>
>> >>>> TIA
>> >>>>
>> >>>> Dianne
>> >>>
>> >>> ------------------------------------------------------------------------------
>> >>> The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
>> >>> production scanning environment may not be a perfect world - but thanks to
>> >>> Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
>> >>> Series Scanner you'll get full speed at 300 dpi even with all image
>> >>> processing features enabled. http://p.sf.net/sfu/kodak-com
>> >>> _______________________________________________
>> >>> Gramps-users mailing list
>> >>> Gramps-users@...
>> >>> https://lists.sourceforge.net/lists/listinfo/gramps-users
>> >>>
>> >>
>> >
>> >
>>
>>
>
>
> ------------------------------------------------------------------------------
> The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
> production scanning environment may not be a perfect world - but thanks to
> Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
> Series Scanner you'll get full speed at 300 dpi even with all image
> processing features enabled. http://p.sf.net/sfu/kodak-com
> _______________________________________________
> Gramps-users mailing list
> Gramps-users@...
> https://lists.sourceforge.net/lists/listinfo/gramps-users
>
--
Gerald Britton
|