Try checking whether you have Imlib2 installed in some other place. This
probably is the cause of this problem. Remove all traces of Imlib2
(don't forget imlib2-config) in other places of the system, and start
('which imlib2-config', and 'ldconfig -v | grep imlib2' are your
Everything should go well now.
There are build instructions for E17 at the following website:
> Date: Mon, 28 Jan 2002 13:00:30 +0100
> From: Till Adam <till@...>
> To: enlightenment-devel@...
> Subject: [E-devel] [stephane.tranchemer@...: imlib2_loaders and --prefix option]
> ----- Forwarded message from tranchemer stephane <stephane.tranchemer@...> -----
> Subject: imlib2_loaders and --prefix option
> From: tranchemer stephane <stephane.tranchemer@...>
> To: tillsan@...
> X-Mailer: Evolution/1.0.1
> Date: 28 Jan 2002 12:33:38 +0100
> Since I'm not related to the E17 dev mailling list and you are the one
> that modified most recently the CVS tree of imlib2_loaders I'm sending
> this to you.
> I had problems using the --prefix option in the configure command.
> For all the E17 packages I used "sh autogen.sh --prefix=/usr/local/e17"
> to make E17 install where it won't mix with the whole system.
> However, the imlib2_loaders is the only one that has to be installed
> with no prefix option ... else E won't find the lib at configure time.
> Is it imlib2_loaders or E related problem ?
> Is imlib2_loaders should be installed without any prefix option ?
> best regards