gumstix

It won't work unless your kernel is compiled for USB On-The-Go support
as both host and device(default kernels are compiled for host only
mode), as well as providing a gadget driver. (I think, never tried it)
> Hi,
> 
> How can I correctly connect OveroWater with Pinto_TH to a linux computer? I
> did it but there was no connection.
> 
> Thank you,
> 
>   Arm

Thank you for the respond, but according to getting started page
http://www.gumstix.net/images/overo_snapshot_19.pdf. It says Connect a
mini-B to standard A USB cable from USB console port to a USB port on your
computer (green LED will illuminate). The computer will detect the
connection and the COM will mount , but the green LED on my pinto-th board
did not show up and there was no connection to the computer. What do you
think went wrong? 



Victhor Foster wrote:
> 
> It won't work unless your kernel is compiled for USB On-The-Go support
> as both host and device(default kernels are compiled for host only
> mode), as well as providing a gadget driver. (I think, never tried it)
>> Hi,
>> 
>> How can I correctly connect OveroWater with Pinto_TH to a linux computer?
>> I
>> did it but there was no connection.
>> 
>> Thank you,
>> 
>>   Arm
> 
> 
> 
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Sprint
> What will you do first with EVO, the first 4G phone?
> Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
> _______________________________________________
> gumstix-users mailing list
> gumstix-users@...
> https://lists.sourceforge.net/lists/listinfo/gumstix-users
> 
> 

-- 
View this message in context: http://old.nabble.com/Connect-OveroWater-with-Pinto_TH-to-a-linux-computer-tp29081186p29090112.html
Sent from the Gumstix mailing list archive at Nabble.com.

Hi,

On Tue, Jul 6, 2010 at 2:14 PM, arm_555 <arm@...> wrote:
>
> Thank you for the respond, but according to getting started page
> http://www.gumstix.net/images/overo_snapshot_19.pdf. It says Connect a
> mini-B to standard A USB cable from USB console port to a USB port on your
> computer (green LED will illuminate). The computer will detect the
> connection and the COM will mount , but the green LED on my pinto-th board
> did not show up and there was no connection to the computer. What do you
> think went wrong?

The getting started guide was written with a Summit board in mind, not a pinto.

The pinto only has the console available as logic level serial, not
USB like the other daughtercards.

-- 
Dave Hylands
Shuswap, BC, Canada
http://www.DaveHylands.com/

Dylan,

  Thank you so much! Now it all makes sense.

Thank you,

   Arm

-----Original Message-----
From: Dave Hylands [mailto:dhylands@...] 
Sent: Tuesday, July 06, 2010 4:28 PM
To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Connect OveroWater with Pinto_TH to a linux
computer

Hi,

On Tue, Jul 6, 2010 at 2:14 PM, arm_555 <arm@...> wrote:
>
> Thank you for the respond, but according to getting started page
> http://www.gumstix.net/images/overo_snapshot_19.pdf. It says Connect a
> mini-B to standard A USB cable from USB console port to a USB port on your
> computer (green LED will illuminate). The computer will detect the
> connection and the COM will mount , but the green LED on my pinto-th board
> did not show up and there was no connection to the computer. What do you
> think went wrong?

The getting started guide was written with a Summit board in mind, not a
pinto.

The pinto only has the console available as logic level serial, not
USB like the other daughtercards.

-- 
Dave Hylands
Shuswap, BC, Canada
http://www.DaveHylands.com/

----------------------------------------------------------------------------
--
This SF.net email is sponsored by Sprint
What will you do first with EVO, the first 4G phone?
Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
_______________________________________________
gumstix-users mailing list
gumstix-users@...
https://lists.sourceforge.net/lists/listinfo/gumstix-users

No virus found in this incoming message.
Checked by AVG - http://www.avg.com 
Version: 9.0.830 / Virus Database: 271.1.1/2975 - Release Date: 07/06/10
01:36:00