Webmin

Thanks for the new patch ..

I'd like to verify this a bit more closely though. Could you 
send me the output of the 'status dir', 'status client' and
'status storage' commands run at the Bacula console on your
system, showing some successful and failed jobs? I suspect
that it is different from my system..

 - Jamie

On 21/Mar/2008 00:44 Clément VERET wrote ..
> Errr... I've just seen that there was a little problem with this patch
> : before applying it, the Bacula Module just displays you jobs that
> have the "Error" status ; after, it displays you only jobs that have
> the "OK" status (ooops...). That's particularly unuseful if you want
> to know the status of all jobs done by Bacula.
> 
> I send you the correction : I was wrong on a little part of the
> regular expression (jobs in OK status display the quantity of data
> under the form '135.56 M', jobs in error status display '0' instead).
> 
> Sorry for the first wrong patch.
> 
> Regards.
> 
> 2008/2/27, Jamie Cameron <jcameron@...>:
> > Thanks for the patch! I will include this in the next Webmin release ..
> >
> >   - Jamie
> >
> >  On 27/Feb/2008 03:04 Clément VERET wrote ..
> >
> > > Hi everyone,
> >  >
> >  > I was playing with the bacula-backup module (and bacule by the way)
> >  > and I found what's look like a bug.
> >  >
> >  > Actually, it was impossible to see the completed jobs in the "Director
> >  > Status", "Storage Status" and "Client Status" pages.
> >  >
> >  > So I took a little bit of patience, and I corrected the regexp of this
> >  > modules concerning completed jobs.
> >  >
> >  > Unfortunatly, I wasn't able to test it on something else than a CentOS
> >  > 5.1/Webmin 1.40/Bacula 2.03 (EPEL Version actually).
> >  >
> >  > Hope this can help...
> >  >
> >  > P.S. : excuse my eventual typo, I'm learning Dvorak french keyboard
> >  > since last week :)
> >  > --
> >  > Clément Véret
> >
> > -------------------------------------------------------------------------
> >  This SF.net email is sponsored by: Microsoft
> >  Defy all challenges. Microsoft(R) Visual Studio 2008.
> >  http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > -
> >  Forwarded by the Webmin development list at webmin-devel@...
> >  To remove yourself from this list, go to
> >  http://lists.sourceforge.net/lists/listinfo/webadmin-devel
> >
> >
> 
> 
> -- 
> Clément Véret

2008/3/21, Jamie Cameron <jcameron@...>:
> Thanks for the new patch ..
>
>  I'd like to verify this a bit more closely though. Could you
>  send me the output of the 'status dir', 'status client' and
>  'status storage' commands run at the Bacula console on your
>  system, showing some successful and failed jobs? I suspect
>  that it is different from my system..

No problem :

*status director
bacula-01-dir Version: 2.0.3 (06 March 2007) i686-redhat-linux-gnu
redhat Enterp
                    rise release
Daemon started 21-mar-08 08:38, 14 Jobs run since started.
 Heap: bytes=40,750 max_bytes=51,634 bufs=199 max_bufs=241

Scheduled Jobs:
Level          Type     Pri  Scheduled          Name               Volume
================================================================================

      ===
Incremental    Backup    10  25-mar-08 21:00    SvgData            JN0001
====

Running Jobs:
No Jobs running.
====

Terminated Jobs:
 JobId  Level    Files      Bytes   Status   Finished        Name
====================================================================
     1  Full        250    22.41 M  OK       25-mar-08 02:25 SvgData
     2  Full          0         0   Cancel   25-mar-08 02:27 SvgData

====

(this is not an Error but a Cancel status, but the output is the same...)

*status storage=Tape
Connecting to Storage daemon Tape at bacula-01:9103

bacula-01-sd Version: 2.0.3 (06 March 2007) i686-redhat-linux-gnu
redhat Enterprise release
Daemon started 21-mar-08 08:42, 2 Jobs run since started.
 Heap: bytes=87,246 max_bytes=154,630 bufs=77 max_bufs=100

Running Jobs:
No Jobs running.
====

Jobs waiting to reserve a drive:
====

Terminated Jobs:
 JobId  Level    Files      Bytes   Status   Finished        Name
===================================================================
     1  Full        250    22.44 M  OK       25-mar-08 02:25 SvgData
     2  Full          0         0   Cancel   25-mar-08 02:27 SvgData
====

Device status:
Device "FileStorage" (/tmp) is not open.
Device "TapeDrive" (/dev/tape) open but no Bacula volume is currently mounted.
    Total Bytes Read=0 Blocks Read=0 Bytes/block=0
    Positioned at File=0 Block=0
====

In Use Volume status:
====

*status client
Automatically selected Client: bacula-01-fd
Connecting to Client bacula-01-fd at bacula-01:9102

bacula-01-fd Version: 2.0.3 (06 March 2007)  i686-redhat-linux-gnu
redhat Enterprise release
Daemon started 21-mar-08 08:00, 2 Jobs run since started.
 Heap: bytes=11,284 max_bytes=422,236 bufs=52 max_bufs=1,474
 Sizeof: boffset_t=8 size_t=4 debug=0 trace=0

Running Jobs:
Director connected at: 25-mar-08 02:30
No Jobs running.
====

Terminated Jobs:
 JobId  Level    Files      Bytes   Status   Finished        Name
======================================================================
     1  Full        250    22.41 M  OK       25-mar-08 02:25 SvgData
     2  Full          0         0   Cancel   25-mar-08 02:27 SvgData
====
-- 
Clément Véret

On 25/Mar/2008 01:51 Clément VERET wrote ..
> 2008/3/21, Jamie Cameron <jcameron@...>:
> > Thanks for the new patch ..
> >
> >  I'd like to verify this a bit more closely though. Could you
> >  send me the output of the 'status dir', 'status client' and
> >  'status storage' commands run at the Bacula console on your
> >  system, showing some successful and failed jobs? I suspect
> >  that it is different from my system..
> 
> No problem :
> 
> *status director
> bacula-01-dir Version: 2.0.3 (06 March 2007) i686-redhat-linux-gnu
> redhat Enterp
>                     rise release
> Daemon started 21-mar-08 08:38, 14 Jobs run since started.
>  Heap: bytes=40,750 max_bytes=51,634 bufs=199 max_bufs=241
> 
> Scheduled Jobs:
> Level          Type     Pri  Scheduled          Name               Volume
> ================================================================================
> 
>       ===
> Incremental    Backup    10  25-mar-08 21:00    SvgData            JN0001
> ====
> 
> Running Jobs:
> No Jobs running.
> ====
> 
> Terminated Jobs:
>  JobId  Level    Files      Bytes   Status   Finished        Name
> ====================================================================
>      1  Full        250    22.41 M  OK       25-mar-08 02:25 SvgData
>      2  Full          0         0   Cancel   25-mar-08 02:27 SvgData
> 
> ====
> 
> (this is not an Error but a Cancel status, but the output is the same...)
> 
> *status storage=Tape
> Connecting to Storage daemon Tape at bacula-01:9103
> 
> bacula-01-sd Version: 2.0.3 (06 March 2007) i686-redhat-linux-gnu
> redhat Enterprise release
> Daemon started 21-mar-08 08:42, 2 Jobs run since started.
>  Heap: bytes=87,246 max_bytes=154,630 bufs=77 max_bufs=100
> 
> Running Jobs:
> No Jobs running.
> ====
> 
> Jobs waiting to reserve a drive:
> ====
> 
> Terminated Jobs:
>  JobId  Level    Files      Bytes   Status   Finished        Name
> ===================================================================
>      1  Full        250    22.44 M  OK       25-mar-08 02:25 SvgData
>      2  Full          0         0   Cancel   25-mar-08 02:27 SvgData
> ====
> 
> Device status:
> Device "FileStorage" (/tmp) is not open.
> Device "TapeDrive" (/dev/tape) open but no Bacula volume is currently mounted.
>     Total Bytes Read=0 Blocks Read=0 Bytes/block=0
>     Positioned at File=0 Block=0
> ====
> 
> In Use Volume status:
> ====
> 
> *status client
> Automatically selected Client: bacula-01-fd
> Connecting to Client bacula-01-fd at bacula-01:9102
> 
> bacula-01-fd Version: 2.0.3 (06 March 2007)  i686-redhat-linux-gnu
> redhat Enterprise release
> Daemon started 21-mar-08 08:00, 2 Jobs run since started.
>  Heap: bytes=11,284 max_bytes=422,236 bufs=52 max_bufs=1,474
>  Sizeof: boffset_t=8 size_t=4 debug=0 trace=0
> 
> Running Jobs:
> Director connected at: 25-mar-08 02:30
> No Jobs running.
> ====
> 
> Terminated Jobs:
>  JobId  Level    Files      Bytes   Status   Finished        Name
> ======================================================================
>      1  Full        250    22.41 M  OK       25-mar-08 02:25 SvgData
>      2  Full          0         0   Cancel   25-mar-08 02:27 SvgData
> ====

Thanks - I will tweak the regexps to handle those formats.

 - Jamie

Here's a little more info on the issue.

We have the virtual hosts configs in a custom place.   Bill and I see 
that its adding  files in the custom directory, but we suspect the mods 
and deletes aren't looking in the custom directory, its just falling 
back to /etc/apache2/sites_enabled.

When we do imports, it doesn't work unless we copy the file into 
/etc/apache2/sites_enabled. 

John

Bill Moyers wrote:
> Hi, we have a minor problem with virtualmin which just requires occasional
> hand intervention. For some reason when we create virtual server aliases,
> the ServerAlias line in apache's vhosts/<parentdomain>.conf is not updated
> with the new alias. When a domain is created it does create the .conf
> file, and it seems from tracing through the code that it's just not
> looking there when it creates an alias, I'm not sure if maybe it's looking
> in apache's httpd.conf. I don't know if this is some idiosyncracy of our
> setup, if so sorry to bother you.
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> -
> Forwarded by the Webmin development list at webmin-devel@...
> To remove yourself from this list, go to
> http://lists.sourceforge.net/lists/listinfo/webadmin-devel
>   


-- 
John Gray                           gray@...
AgoraNet, Inc.                      (302) 224-2475
314 E. Main Street, Suite 1         (302) 224-2552 (fax)
Newark, De 19711                    http://www.agora-net.com

On 10/Mar/2008 07:43 Bill Moyers wrote ..
> Hi, we have a minor problem with virtualmin which just requires occasional
> hand intervention. For some reason when we create virtual server aliases,
> the ServerAlias line in apache's vhosts/<parentdomain>.conf is not updated
> with the new alias. When a domain is created it does create the .conf
> file, and it seems from tracing through the code that it's just not
> looking there when it creates an alias, I'm not sure if maybe it's looking
> in apache's httpd.conf. I don't know if this is some idiosyncracy of our
> setup, if so sorry to bother you.

I've haven't seen that one before - does this happen all the time, 
or just occasionally?

 - Jamie

The behavior is consistent for a given operation.   It seems like its 
using virt_file for some things, and httpd_dir for other things.

virt_file is really a directory which has all the virtual host stanza 
files.  That's where I'd like it to be looking for any of virtual host 
operations.

John

Jamie Cameron wrote:
> On 10/Mar/2008 07:43 Bill Moyers wrote ..
>   
>> Hi, we have a minor problem with virtualmin which just requires occasional
>> hand intervention. For some reason when we create virtual server aliases,
>> the ServerAlias line in apache's vhosts/<parentdomain>.conf is not updated
>> with the new alias. When a domain is created it does create the .conf
>> file, and it seems from tracing through the code that it's just not
>> looking there when it creates an alias, I'm not sure if maybe it's looking
>> in apache's httpd.conf. I don't know if this is some idiosyncracy of our
>> setup, if so sorry to bother you.
>>     
>
> I've haven't seen that one before - does this happen all the time, 
> or just occasionally?
>
>  - Jamie
>
>   
-- 
John Gray                           gray@...
AgoraNet, Inc.                      (302) 224-2475
314 E. Main Street, Suite 1         (302) 224-2552 (fax)
Newark, De 19711                    http://www.agora-net.com

Here's a little more info, looks like setup_web calls get_website_file 
which use virt_file config var.  There are routines for locking that 
call get_website_file too.  But nobody else calls get_website_file.    
And I believe get_website_file has the proper logic.

The delete_web calls get_apache_virtual, which doesn't appear to arrive 
at the location of the virtual host file that same way.  
get_apache_virtual calls get_config_file (in the apache module) which 
doesn't use virt_file at all.  It seems to go directly to sties-enabled.

The same goes for most of the others (maybe all of the others).

John

John Gray wrote:
> The behavior is consistent for a given operation.   It seems like its 
> using virt_file for some things, and httpd_dir for other things.
>
> virt_file is really a directory which has all the virtual host stanza 
> files.  That's where I'd like it to be looking for any of virtual host 
> operations.
>
> John
>
> Jamie Cameron wrote:
>   
>> On 10/Mar/2008 07:43 Bill Moyers wrote ..
>>   
>>     
>>> Hi, we have a minor problem with virtualmin which just requires occasional
>>> hand intervention. For some reason when we create virtual server aliases,
>>> the ServerAlias line in apache's vhosts/<parentdomain>.conf is not updated
>>> with the new alias. When a domain is created it does create the .conf
>>> file, and it seems from tracing through the code that it's just not
>>> looking there when it creates an alias, I'm not sure if maybe it's looking
>>> in apache's httpd.conf. I don't know if this is some idiosyncracy of our
>>> setup, if so sorry to bother you.
>>>     
>>>       
>> I've haven't seen that one before - does this happen all the time, 
>> or just occasionally?
>>
>>  - Jamie
>>
>>   
>>     


-- 
John Gray                           gray@...
AgoraNet, Inc.                      (302) 224-2475
314 E. Main Street, Suite 1         (302) 224-2552 (fax)
Newark, De 19711                    http://www.agora-net.com

On the page System Settings -> Server templates -> Default settings ->
Apache website, is 'Create alias websites by' set to 'Add serveralias
to parent' ?

 - Jamie

On 10/Mar/2008 11:10 John Gray wrote ..
> Here's a little more info, looks like setup_web calls get_website_file 
> which use virt_file config var.  There are routines for locking that 
> call get_website_file too.  But nobody else calls get_website_file.    
> And I believe get_website_file has the proper logic.
> 
> The delete_web calls get_apache_virtual, which doesn't appear to arrive 
> at the location of the virtual host file that same way.  
> get_apache_virtual calls get_config_file (in the apache module) which 
> doesn't use virt_file at all.  It seems to go directly to sties-enabled.
> 
> The same goes for most of the others (maybe all of the others).
> 
> John
> 
> John Gray wrote:
> > The behavior is consistent for a given operation.   It seems like its 
> > using virt_file for some things, and httpd_dir for other things.
> >
> > virt_file is really a directory which has all the virtual host stanza 
> > files.  That's where I'd like it to be looking for any of virtual host 
> > operations.
> >
> > John
> >
> > Jamie Cameron wrote:
> >   
> >> On 10/Mar/2008 07:43 Bill Moyers wrote ..
> >>   
> >>     
> >>> Hi, we have a minor problem with virtualmin which just requires occasional
> >>> hand intervention. For some reason when we create virtual server aliases,
> >>> the ServerAlias line in apache's vhosts/<parentdomain>.conf is not updated
> >>> with the new alias. When a domain is created it does create the .conf
> >>> file, and it seems from tracing through the code that it's just not
> >>> looking there when it creates an alias, I'm not sure if maybe it's looking
> >>> in apache's httpd.conf. I don't know if this is some idiosyncracy of our
> >>> setup, if so sorry to bother you.
> >>>     
> >>>       
> >> I've haven't seen that one before - does this happen all the time, 
> >> or just occasionally?
> >>
> >>  - Jamie
> >>
> >>   
> >>     
> 
> 
> -- 
> John Gray                           gray@...
> AgoraNet, Inc.                      (302) 224-2475
> 314 E. Main Street, Suite 1         (302) 224-2552 (fax)
> Newark, De 19711                    http://www.agora-net.com
> 
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> -
> Forwarded by the Webmin development list at webmin-devel@...
> To remove yourself from this list, go to
> http://lists.sourceforge.net/lists/listinfo/webadmin-devel

Yes, that's how its set.

John

Jamie Cameron wrote:
> On the page System Settings -> Server templates -> Default settings ->
> Apache website, is 'Create alias websites by' set to 'Add serveralias
> to parent' ?
>
>  - Jamie
>
> On 10/Mar/2008 11:10 John Gray wrote ..
>   
>> Here's a little more info, looks like setup_web calls get_website_file 
>> which use virt_file config var.  There are routines for locking that 
>> call get_website_file too.  But nobody else calls get_website_file.    
>> And I believe get_website_file has the proper logic.
>>
>> The delete_web calls get_apache_virtual, which doesn't appear to arrive 
>> at the location of the virtual host file that same way.  
>> get_apache_virtual calls get_config_file (in the apache module) which 
>> doesn't use virt_file at all.  It seems to go directly to sties-enabled.
>>
>> The same goes for most of the others (maybe all of the others).
>>
>> John
>>
>> John Gray wrote:
>>     
>>> The behavior is consistent for a given operation.   It seems like its 
>>> using virt_file for some things, and httpd_dir for other things.
>>>
>>> virt_file is really a directory which has all the virtual host stanza 
>>> files.  That's where I'd like it to be looking for any of virtual host 
>>> operations.
>>>
>>> John
>>>
>>> Jamie Cameron wrote:
>>>   
>>>       
>>>> On 10/Mar/2008 07:43 Bill Moyers wrote ..
>>>>   
>>>>     
>>>>         
>>>>> Hi, we have a minor problem with virtualmin which just requires occasional
>>>>> hand intervention. For some reason when we create virtual server aliases,
>>>>> the ServerAlias line in apache's vhosts/<parentdomain>.conf is not updated
>>>>> with the new alias. When a domain is created it does create the .conf
>>>>> file, and it seems from tracing through the code that it's just not
>>>>> looking there when it creates an alias, I'm not sure if maybe it's looking
>>>>> in apache's httpd.conf. I don't know if this is some idiosyncracy of our
>>>>> setup, if so sorry to bother you.
>>>>>     
>>>>>       
>>>>>           
>>>> I've haven't seen that one before - does this happen all the time, 
>>>> or just occasionally?
>>>>
>>>>  - Jamie
>>>>
>>>>   
>>>>     
>>>>         
>> -- 
>> John Gray                           gray@...
>> AgoraNet, Inc.                      (302) 224-2475
>> 314 E. Main Street, Suite 1         (302) 224-2552 (fax)
>> Newark, De 19711                    http://www.agora-net.com
>>
>>
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by: Microsoft
>> Defy all challenges. Microsoft(R) Visual Studio 2008.
>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>> -
>> Forwarded by the Webmin development list at webmin-devel@...
>> To remove yourself from this list, go to
>> http://lists.sourceforge.net/lists/listinfo/webadmin-devel
>>     
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> -
> Forwarded by the Webmin development list at webmin-devel@...
> To remove yourself from this list, go to
> http://lists.sourceforge.net/lists/listinfo/webadmin-devel
>
>   


-- 
John Gray                           gray@...
AgoraNet, Inc.                      (302) 224-2475
314 E. Main Street, Suite 1         (302) 224-2552 (fax)
Newark, De 19711                    http://www.agora-net.com

I think the real issue here is this:  In Apache Webmin Config, there's a 
config option:

 "File or directory to add virtual servers to:"   
With  options  of:
httpd.conf 
or a user supplied value.

We have the user supplied option.  It does add them there.  But it won't 
maintain them there.   Try making some directory, set this option to 
point to it.  Add a server.  You'll see it in the directory.  Now try 
deleting and otherwise modify it.   Nothing.

John

John Gray wrote:
> Yes, that's how its set.
>
> John
>
> Jamie Cameron wrote:
>   
>> On the page System Settings -> Server templates -> Default settings ->
>> Apache website, is 'Create alias websites by' set to 'Add serveralias
>> to parent' ?
>>
>>  - Jamie
>>
>> On 10/Mar/2008 11:10 John Gray wrote ..
>>   
>>     
>>> Here's a little more info, looks like setup_web calls get_website_file 
>>> which use virt_file config var.  There are routines for locking that 
>>> call get_website_file too.  But nobody else calls get_website_file.    
>>> And I believe get_website_file has the proper logic.
>>>
>>> The delete_web calls get_apache_virtual, which doesn't appear to arrive 
>>> at the location of the virtual host file that same way.  
>>> get_apache_virtual calls get_config_file (in the apache module) which 
>>> doesn't use virt_file at all.  It seems to go directly to sties-enabled.
>>>
>>> The same goes for most of the others (maybe all of the others).
>>>
>>> John
>>>
>>> John Gray wrote:
>>>     
>>>       
>>>> The behavior is consistent for a given operation.   It seems like its 
>>>> using virt_file for some things, and httpd_dir for other things.
>>>>
>>>> virt_file is really a directory which has all the virtual host stanza 
>>>> files.  That's where I'd like it to be looking for any of virtual host 
>>>> operations.
>>>>
>>>> John
>>>>
>>>> Jamie Cameron wrote:
>>>>   
>>>>       
>>>>         
>>>>> On 10/Mar/2008 07:43 Bill Moyers wrote ..
>>>>>   
>>>>>     
>>>>>         
>>>>>           
>>>>>> Hi, we have a minor problem with virtualmin which just requires occasional
>>>>>> hand intervention. For some reason when we create virtual server aliases,
>>>>>> the ServerAlias line in apache's vhosts/<parentdomain>.conf is not updated
>>>>>> with the new alias. When a domain is created it does create the .conf
>>>>>> file, and it seems from tracing through the code that it's just not
>>>>>> looking there when it creates an alias, I'm not sure if maybe it's looking
>>>>>> in apache's httpd.conf. I don't know if this is some idiosyncracy of our
>>>>>> setup, if so sorry to bother you.
>>>>>>     
>>>>>>       
>>>>>>           
>>>>>>             
>>>>> I've haven't seen that one before - does this happen all the time, 
>>>>> or just occasionally?
>>>>>
>>>>>  - Jamie
>>>>>
>>>>>   
>>>>>     
>>>>>         
>>>>>           
>>> -- 
>>> John Gray                           gray@...
>>> AgoraNet, Inc.                      (302) 224-2475
>>> 314 E. Main Street, Suite 1         (302) 224-2552 (fax)
>>> Newark, De 19711                    http://www.agora-net.com
>>>
>>>
>>> -------------------------------------------------------------------------
>>> This SF.net email is sponsored by: Microsoft
>>> Defy all challenges. Microsoft(R) Visual Studio 2008.
>>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>>> -
>>> Forwarded by the Webmin development list at webmin-devel@...
>>> To remove yourself from this list, go to
>>> http://lists.sourceforge.net/lists/listinfo/webadmin-devel
>>>     
>>>       
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by: Microsoft
>> Defy all challenges. Microsoft(R) Visual Studio 2008.
>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>> -
>> Forwarded by the Webmin development list at webmin-devel@...
>> To remove yourself from this list, go to
>> http://lists.sourceforge.net/lists/listinfo/webadmin-devel
>>
>>   
>>     
>
>
>   


-- 
John Gray                           gray@...
AgoraNet, Inc.                      (302) 224-2475
314 E. Main Street, Suite 1         (302) 224-2552 (fax)
Newark, De 19711                    http://www.agora-net.com

Those options don't really matter for alias domains though - in the
default mode (which you are using), aliases are implemented by adding
a ServerAlias entry to the target domain's <virtualhost> block. This
is done starting at line 41 in feature-web.pl .

Also, I re-checked this on my test system, and it worked fine..

 - Jamie

On 11/Mar/2008 07:21 John Gray wrote ..
> I think the real issue here is this:  In Apache Webmin Config, there's a 
> config option:
> 
>  "File or directory to add virtual servers to:"   
> With  options  of:
> httpd.conf 
> or a user supplied value.
> 
> We have the user supplied option.  It does add them there.  But it won't 
> maintain them there.   Try making some directory, set this option to 
> point to it.  Add a server.  You'll see it in the directory.  Now try 
> deleting and otherwise modify it.   Nothing.
> 
> John
> 
> John Gray wrote:
> > Yes, that's how its set.
> >
> > John
> >
> > Jamie Cameron wrote:
> >   
> >> On the page System Settings -> Server templates -> Default settings ->
> >> Apache website, is 'Create alias websites by' set to 'Add serveralias
> >> to parent' ?
> >>
> >>  - Jamie
> >>
> >> On 10/Mar/2008 11:10 John Gray wrote ..
> >>   
> >>     
> >>> Here's a little more info, looks like setup_web calls get_website_file 
> >>> which use virt_file config var.  There are routines for locking that 
> >>> call get_website_file too.  But nobody else calls get_website_file.    
> >>> And I believe get_website_file has the proper logic.
> >>>
> >>> The delete_web calls get_apache_virtual, which doesn't appear to arrive 
> >>> at the location of the virtual host file that same way.  
> >>> get_apache_virtual calls get_config_file (in the apache module) which 
> >>> doesn't use virt_file at all.  It seems to go directly to sties-enabled.
> >>>
> >>> The same goes for most of the others (maybe all of the others).
> >>>
> >>> John
> >>>
> >>> John Gray wrote:
> >>>     
> >>>       
> >>>> The behavior is consistent for a given operation.   It seems like its 
> >>>> using virt_file for some things, and httpd_dir for other things.
> >>>>
> >>>> virt_file is really a directory which has all the virtual host stanza 
> >>>> files.  That's where I'd like it to be looking for any of virtual host 
> >>>> operations.
> >>>>
> >>>> John
> >>>>
> >>>> Jamie Cameron wrote:
> >>>>   
> >>>>       
> >>>>         
> >>>>> On 10/Mar/2008 07:43 Bill Moyers wrote ..
> >>>>>   
> >>>>>     
> >>>>>         
> >>>>>           
> >>>>>> Hi, we have a minor problem with virtualmin which just requires occasional
> >>>>>> hand intervention. For some reason when we create virtual server aliases,
> >>>>>> the ServerAlias line in apache's vhosts/<parentdomain>.conf is not updated
> >>>>>> with the new alias. When a domain is created it does create the .conf
> >>>>>> file, and it seems from tracing through the code that it's just not
> >>>>>> looking there when it creates an alias, I'm not sure if maybe it's looking
> >>>>>> in apache's httpd.conf. I don't know if this is some idiosyncracy of our
> >>>>>> setup, if so sorry to bother you.
> >>>>>>     
> >>>>>>       
> >>>>>>           
> >>>>>>             
> >>>>> I've haven't seen that one before - does this happen all the time, 
> >>>>> or just occasionally?
> >>>>>
> >>>>>  - Jamie
> >>>>>
> >>>>>   
> >>>>>     
> >>>>>         
> >>>>>           
> >>> -- 
> >>> John Gray                           gray@...
> >>> AgoraNet, Inc.                      (302) 224-2475
> >>> 314 E. Main Street, Suite 1         (302) 224-2552 (fax)
> >>> Newark, De 19711                    http://www.agora-net.com
> >>>
> >>>
> >>> -------------------------------------------------------------------------
> >>> This SF.net email is sponsored by: Microsoft
> >>> Defy all challenges. Microsoft(R) Visual Studio 2008.
> >>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> >>> -
> >>> Forwarded by the Webmin development list at webmin-devel@...
> >>> To remove yourself from this list, go to
> >>> http://lists.sourceforge.net/lists/listinfo/webadmin-devel
> >>>     
> >>>       
> >> -------------------------------------------------------------------------
> >> This SF.net email is sponsored by: Microsoft
> >> Defy all challenges. Microsoft(R) Visual Studio 2008.
> >> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> >> -
> >> Forwarded by the Webmin development list at webmin-devel@...
> >> To remove yourself from this list, go to
> >> http://lists.sourceforge.net/lists/listinfo/webadmin-devel
> >>
> >>   
> >>     
> >
> >
> >   
> 
> 
> -- 
> John Gray                           gray@...
> AgoraNet, Inc.                      (302) 224-2475
> 314 E. Main Street, Suite 1         (302) 224-2552 (fax)
> Newark, De 19711                    http://www.agora-net.com
> 
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> -
> Forwarded by the Webmin development list at webmin-devel@...
> To remove yourself from this list, go to
> http://lists.sourceforge.net/lists/listinfo/webadmin-devel

On 06/Mar/2008 23:35 Ivan Garcia wrote ..
<blockquote type="cite">
Hi everybody, is it possible centralize the crontab management and DHCP leases for many servers using only one Webmin server? Does the cluster allow to do this? Do we need to install Webmin in all the remote servers or webmin will connect internally trought SSH and manage Cron and DHCP? <br />
<br />If it's not implemented, can you give us an example of something similar already done in Webmin?<br /><br />
</blockquote><p>Webmin does have a Cluster Cron Jobs module that can run commands on multiple systems, although they do all need to have webmin installed.<br /><br />What do you want to do with a DHCP cluster though? Are you looking for a way to have multiple redundant servers with the same configs .. and if so, is that even possible without them stepping on each others' toes due to differences in the lease files?<br /><br />&nbsp;- Jamie</p><p><br />
</p>

Hello Jamie,

Currently the DHCP leases funciton of Webmin works locally with the
dchp.leases file and the dhcpd.conf (for configuration and static hosts),
could our local Webmin server connect internally via ssh to other linux
servers to read and modify these files in order to be able to list and
configure their DHCP?

These could be done in 2 ways:
1 - Using a webmin cluster:
    - Advantage: No need to store their passwords(in case that we share the
same user/password in all the cluster)
    - Disadvantage: We need to install webmin in all the other remote DHCP
servers.
2 -Connect to the remote DHCP servers via SSH:
   - Advantage: No need to install webmin on them.
   - Note(to Confirm): If we create an root user in the remote DHCP servers
with the same password than our current webmin administrator, then we don't
need to store passwords in our Webmin.

That's the reason I would sugest the 2nd way. Let me know your feedback
about it.

By the way, is there any already implemented webmin module that connects
internally trought ssh to another sever(no webmin) to view or modify any
configuration?

Best Regards.
Ivan.

On Sat, Mar 8, 2008 at 3:02 AM, Jamie Cameron <jcameron@...> wrote:

> On 06/Mar/2008 23:35 Ivan Garcia wrote ..
>
> Hi everybody, is it possible centralize the crontab management and DHCP
> leases for many servers using only one Webmin server? Does the cluster allow
> to do this? Do we need to install Webmin in all the remote servers or webmin
> will connect internally trought SSH and manage Cron and DHCP?
>
> If it's not implemented, can you give us an example of something similar
> already done in Webmin?
>
> Webmin does have a Cluster Cron Jobs module that can run commands on
> multiple systems, although they do all need to have webmin installed.
>
> What do you want to do with a DHCP cluster though? Are you looking for a
> way to have multiple redundant servers with the same configs .. and if so,
> is that even possible without them stepping on each others' toes due to
> differences in the lease files?
>
>  - Jamie
>
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> -
> Forwarded by the Webmin development list at webmin-devel@...
> To remove yourself from this list, go to
> http://lists.sourceforge.net/lists/listinfo/webadmin-devel
>
>

<p>Hi Ivan,<br /><br />I would tend to favour option 1, as that is the way all the other Webmin cluster modules work - there is no dependency on SSH or need to configure it, instead the remote system just has to be added in the Webmin Servers Index module.<br /><br />In this case, would you want all these DHCP servers to share the same configuration or leases? If not, you could just install Webmin on each system and login to them remotely from a single PC to configure their DHCP servers independently ..<br /><br />&nbsp;- Jamie<br /></p><p>
On 07/Mar/2008 22:05 Ivan Garcia wrote ..
</p><blockquote type="cite">
Hello Jamie, <br /><br />Currently the DHCP leases funciton of Webmin works locally with the dchp.leases file and the dhcpd.conf (for configuration and static hosts), could our local Webmin server connect internally via ssh to other linux servers to read and modify these files in order to be able to list and configure their DHCP?<br />
<br />These could be done in 2 ways:<br />1 - Using a webmin cluster:<br />&nbsp;&nbsp;&nbsp; - Advantage: No need to store their passwords(in case that we share the same user/password in all the cluster)<br />&nbsp;&nbsp;&nbsp; - Disadvantage: We need to install webmin in all the other remote DHCP servers.<br />
2 -Connect to the remote DHCP servers via SSH:<br />&nbsp;&nbsp; - Advantage: No need to install webmin on them.<br />&nbsp;&nbsp; - Note(to Confirm): If we create an root user in the remote DHCP servers with the same password than our current webmin administrator, then we don't need to store passwords in our Webmin.<br />
<br />That's the reason I would sugest the 2nd way. Let me know your feedback about it.<br /><br />By the way, is there any already implemented webmin module that connects internally trought ssh to another sever(no webmin) to view or modify any configuration?<br />
<br />Best Regards.<br />Ivan.<br /><br /><div class="gmail_quote">On Sat, Mar 8, 2008 at 3:02 AM, Jamie Cameron &lt;<a href="reply_mail.cgi?new=1&amp;to=jcameron%40webmin%2Ecom">jcameron@...; wrote:<br /><blockquote style="border-left: 1px solid #cccccc; margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote">

On 06/Mar/2008 23:35 Ivan Garcia wrote ..
<div class="Ih2E3d"><blockquote type="cite">
Hi everybody, is it possible centralize the crontab management and DHCP leases for many servers using only one Webmin server? Does the cluster allow to do this? Do we need to install Webmin in all the remote servers or webmin will connect internally trought SSH and manage Cron and DHCP? <br />

<br />If it's not implemented, can you give us an example of something similar already done in Webmin?<br /><br />
</blockquote></div><p>Webmin does have a Cluster Cron Jobs module that can run commands on multiple systems, although they do all need to have webmin installed.<br /><br />What do you want to do with a DHCP cluster though? Are you looking for a way to have multiple redundant servers with the same configs .. and if so, is that even possible without them stepping on each others' toes due to differences in the lease files?<br />
<br />&nbsp;- Jamie</p><p><br />
</p>
<br />-------------------------------------------------------------------------<br />
This SF.net email is sponsored by: Microsoft<br />
Defy all challenges. Microsoft(R) Visual Studio 2008.<br />
<a target="_blank" href="http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/">http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/</a><br />-<br />
Forwarded by the Webmin development list at <a href="reply_mail.cgi?new=1&amp;to=webmin%2Ddevel%40webmin%2Ecom">webmin-devel@... />
To remove yourself from this list, go to<br />
<a target="_blank" href="http://lists.sourceforge.net/lists/listinfo/webadmin-devel">http://lists.sourceforge.net/lists/listinfo/webadmin-devel</a><br />
<br /></blockquote></div><br />
</blockquote><br />

Hi Jamie,

the DHCP servers can have a different configuration, the suggestion of
connecting via SSh is because we have around 23 DHCP servers to mantain and
install webmin in all of them can be tedious if I'm not wrong.
Anyway, in the case we decide to create a webmin cluster in all of them,
could we list all the DHCP leases from a single centralized page? I also
woud like to show the samba Windows Users logged using that
machine-IP(analizing the samba log file) so it could be a powerful
monitoring centralized page.

Resuming: We would like to create a page like this:

Centralized DHCP Leases:

- Localhost:
   IP,                    MAC , Samba User, HostName,          Active, Lease
duration
--------------------------------------------------------------------------------------------------------------------
  192.168.0.2 , ff:ff:ff:ff:ff ,      sandra        samba-laptop     YES
1day                    (Remove Lease) (Make static)
   etc

-Branch1 (10.1.5.1)

   IP,                    MAC , Samba User, HostName,          Active, Lease
duration
--------------------------------------------------------------------------------------------------------------------
  192.168.3.1 , ff:ff:ff:ff:ee ,      peter        peter-desktop     YES
4hours                   (Remove Lease) (Make static)


etc.

I hope you understand my idea.

Best Regards.


On Sat, Mar 8, 2008 at 2:08 PM, Jamie Cameron <jcameron@...> wrote:

> Hi Ivan,
>
> I would tend to favour option 1, as that is the way all the other Webmin
> cluster modules work - there is no dependency on SSH or need to configure
> it, instead the remote system just has to be added in the Webmin Servers
> Index module.
>
> In this case, would you want all these DHCP servers to share the same
> configuration or leases? If not, you could just install Webmin on each
> system and login to them remotely from a single PC to configure their DHCP
> servers independently ..
>
>  - Jamie
>
> On 07/Mar/2008 22:05 Ivan Garcia wrote ..
>
> Hello Jamie,
>
> Currently the DHCP leases funciton of Webmin works locally with the
> dchp.leases file and the dhcpd.conf (for configuration and static hosts),
> could our local Webmin server connect internally via ssh to other linux
> servers to read and modify these files in order to be able to list and
> configure their DHCP?
>
> These could be done in 2 ways:
> 1 - Using a webmin cluster:
>     - Advantage: No need to store their passwords(in case that we share
> the same user/password in all the cluster)
>     - Disadvantage: We need to install webmin in all the other remote DHCP
> servers.
> 2 -Connect to the remote DHCP servers via SSH:
>    - Advantage: No need to install webmin on them.
>    - Note(to Confirm): If we create an root user in the remote DHCP
> servers with the same password than our current webmin administrator, then
> we don't need to store passwords in our Webmin.
>
> That's the reason I would sugest the 2nd way. Let me know your feedback
> about it.
>
> By the way, is there any already implemented webmin module that connects
> internally trought ssh to another sever(no webmin) to view or modify any
> configuration?
>
> Best Regards.
> Ivan.
>
> On Sat, Mar 8, 2008 at 3:02 AM, Jamie Cameron <jcameron@... href="http://reply_mail.cgi?new=1&to=jcameron%40webmin%2Ecom" target="_new">http://reply_mail.cgi?new=1&to=jcameron%40webmin%2Ecom>>
> wrote:
>
> > On 06/Mar/2008 23:35 Ivan Garcia wrote ..
> >
> > Hi everybody, is it possible centralize the crontab management and DHCP
> > leases for many servers using only one Webmin server? Does the cluster allow
> > to do this? Do we need to install Webmin in all the remote servers or webmin
> > will connect internally trought SSH and manage Cron and DHCP?
> >
> > If it's not implemented, can you give us an example of something similar
> > already done in Webmin?
> >
> > Webmin does have a Cluster Cron Jobs module that can run commands on
> > multiple systems, although they do all need to have webmin installed.
> >
> > What do you want to do with a DHCP cluster though? Are you looking for a
> > way to have multiple redundant servers with the same configs .. and if so,
> > is that even possible without them stepping on each others' toes due to
> > differences in the lease files?
> >
> >  - Jamie
> >
> >
> >
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > -
> > Forwarded by the Webmin development list at webmin-devel@... href="http://reply_mail.cgi?new=1&to=webmin%2Ddevel%40webmin%2Ecom" target="_new">http://reply_mail.cgi?new=1&to=webmin%2Ddevel%40webmin%2Ecom>
> > To remove yourself from this list, go to
> > http://lists.sourceforge.net/lists/listinfo/webadmin-devel
> >
> >
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> -
> Forwarded by the Webmin development list at webmin-devel@...
> To remove yourself from this list, go to
> http://lists.sourceforge.net/lists/listinfo/webadmin-devel
>
>

On 07/Mar/2008 22:39 Ivan Garcia wrote ..
<blockquote type="cite">
Hi Jamie, <br /><br />the DHCP servers can have a different configuration, the suggestion of connecting via SSh is because we have around 23 DHCP servers to mantain and install webmin in all of them can be tedious if I'm not wrong. <br /></blockquote><p>Not really .. if your servers all support RPM packages, you can install Webmin on them via SSH with a single command like :<br />ssh root@... rpm -U http://www.webmin.com/download/rpm/webmin-current.rpm<br /><br />This will set it up to allow logins by root with the Unix root password.<br /></p><blockquote type="cite"><p>
Anyway, in the case we decide to create a webmin cluster in all of them, could we list all the DHCP leases from a single centralized page? I also woud like to show the samba Windows Users logged using that machine-IP(analizing the samba log file) so it could be a powerful monitoring centralized page. <br />
</p></blockquote>That could certainly be implemented, as the remote servers already provide functions to get the Samba users and DHCP leases. But it's not in the current release of Webmin ..<br /><p>&nbsp;- Jamie<br /></p><blockquote type="cite"><p>Resuming: We would like to create a page like this:<br /><br />Centralized DHCP Leases:<br /><br />- Localhost:<br />&nbsp;&nbsp; IP,&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; MAC , Samba User, HostName,&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Active, Lease duration<br />--------------------------------------------------------------------------------------------------------------------<br />
&nbsp; <a href="http://192.168.0.2">192.168.0.2</a> , ff:ff:ff:ff:ff ,&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; sandra&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; samba-laptop&nbsp;&nbsp;&nbsp;&nbsp; YES&nbsp;&nbsp;&nbsp;&nbsp; 1day&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; (Remove Lease) (Make static)<br />&nbsp;&nbsp; etc<br /><br />-Branch1 (<a href="http://10.1.5.1">10.1.5.1</a>)<br />
<br />
&nbsp;&nbsp; IP,&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; MAC , Samba User, HostName,&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Active, Lease duration<br />
--------------------------------------------------------------------------------------------------------------------<br />&nbsp; <a href="http://192.168.3.1">192.168.3.1</a> , ff:ff:ff:ff:ee ,&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; peter &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; peter-desktop &nbsp;&nbsp;&nbsp; YES &nbsp;&nbsp; 4hours&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; (Remove Lease) (Make static)<br />
<br /><br />etc.<br /><br />I hope you understand my idea.<br /><br />Best Regards.<br /><br /><br /></p><div class="gmail_quote">On Sat, Mar 8, 2008 at 2:08 PM, Jamie Cameron &lt;<a href="reply_mail.cgi?new=1&amp;to=jcameron%40webmin%2Ecom">jcameron@...; wrote:<br />
<blockquote style="border-left: 1px solid #cccccc; margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote"><p>Hi Ivan,<br /><br />I would tend to favour option 1, as that is the way all the other Webmin cluster modules work - there is no dependency on SSH or need to configure it, instead the remote system just has to be added in the Webmin Servers Index module.<br />
<br />In this case, would you want all these DHCP servers to share the same configuration or leases? If not, you could just install Webmin on each system and login to them remotely from a single PC to configure their DHCP servers independently ..<br />
<br />&nbsp;- Jamie<br /></p><p>
On 07/Mar/2008 22:05 Ivan Garcia wrote ..
</p><div><div></div><div class="Wj3C7c"><blockquote type="cite">
Hello Jamie, <br /><br />Currently the DHCP leases funciton of Webmin works locally with the dchp.leases file and the dhcpd.conf (for configuration and static hosts), could our local Webmin server connect internally via ssh to other linux servers to read and modify these files in order to be able to list and configure their DHCP?<br />

<br />These could be done in 2 ways:<br />1 - Using a webmin cluster:<br />&nbsp;&nbsp;&nbsp; - Advantage: No need to store their passwords(in case that we share the same user/password in all the cluster)<br />&nbsp;&nbsp;&nbsp; - Disadvantage: We need to install webmin in all the other remote DHCP servers.<br />

2 -Connect to the remote DHCP servers via SSH:<br />&nbsp;&nbsp; - Advantage: No need to install webmin on them.<br />&nbsp;&nbsp; - Note(to Confirm): If we create an root user in the remote DHCP servers with the same password than our current webmin administrator, then we don't need to store passwords in our Webmin.<br />

<br />That's the reason I would sugest the 2nd way. Let me know your feedback about it.<br /><br />By the way, is there any already implemented webmin module that connects internally trought ssh to another sever(no webmin) to view or modify any configuration?<br />

<br />Best Regards.<br />Ivan.<br /><br /><div class="gmail_quote">On Sat, Mar 8, 2008 at 3:02 AM, Jamie Cameron &lt;<a target="_blank" href="http://reply_mail.cgi?new=1&amp;to=jcameron%40webmin%2Ecom">jcameron@...>; wrote:<br />
<blockquote class="gmail_quote" style="border-left: 1px solid #cccccc; margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">

On 06/Mar/2008 23:35 Ivan Garcia wrote ..
<div><blockquote type="cite">
Hi everybody, is it possible centralize the crontab management and DHCP leases for many servers using only one Webmin server? Does the cluster allow to do this? Do we need to install Webmin in all the remote servers or webmin will connect internally trought SSH and manage Cron and DHCP? <br />


<br />If it's not implemented, can you give us an example of something similar already done in Webmin?<br /><br />
</blockquote></div><p>Webmin does have a Cluster Cron Jobs module that can run commands on multiple systems, although they do all need to have webmin installed.<br /><br />What do you want to do with a DHCP cluster though? Are you looking for a way to have multiple redundant servers with the same configs .. and if so, is that even possible without them stepping on each others' toes due to differences in the lease files?<br />

<br />&nbsp;- Jamie</p><p><br />
</p>
<br />-------------------------------------------------------------------------<br />
This SF.net email is sponsored by: Microsoft<br />
Defy all challenges. Microsoft(R) Visual Studio 2008.<br />
<a target="_blank" href="http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/">http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/</a><br />-<br />
Forwarded by the Webmin development list at <a target="_blank" href="http://reply_mail.cgi?new=1&amp;to=webmin%2Ddevel%40webmin%2Ecom">webmin-devel@...> />
To remove yourself from this list, go to<br />
<a target="_blank" href="http://lists.sourceforge.net/lists/listinfo/webadmin-devel">http://lists.sourceforge.net/lists/listinfo/webadmin-devel</a><br />
<br /></blockquote></div><br />
</blockquote><br />
</div></div><br />-------------------------------------------------------------------------<br />
This SF.net email is sponsored by: Microsoft<br />
Defy all challenges. Microsoft(R) Visual Studio 2008.<br />
<a target="_blank" href="http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/">http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/</a><br />-<br />
Forwarded by the Webmin development list at <a href="reply_mail.cgi?new=1&amp;to=webmin%2Ddevel%40webmin%2Ecom">webmin-devel@... />
To remove yourself from this list, go to<br />
<a target="_blank" href="http://lists.sourceforge.net/lists/listinfo/webadmin-devel">http://lists.sourceforge.net/lists/listinfo/webadmin-devel</a><br />
<br /></blockquote></div><br />
</blockquote><br />

> That could certainly be implemented, as the remote servers already provide
> functions to get the Samba users and DHCP leases. But it's not in the
> current release of Webmin ..
>

Do you mean in the development version of Webmin there is already
functionality to get the Samba users from the DHCP leases? How to try that
out?

Best Regards.

On 08/Mar/2008 21:05 Ivan Garcia wrote ..
<blockquote type="cite">
<br /><div class="gmail_quote"><blockquote style="border-left: 1px solid #cccccc; margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote">That could certainly be implemented, as the remote servers already provide functions to get the Samba users and DHCP leases. But it's not in the current release of Webmin ..<br />
</blockquote><div><br />Do you mean in the development version of Webmin there is already functionality to get the Samba users from the DHCP leases? How to try that out?<br /><br /></div></div></blockquote>No, I just mean that Webmin already has information about samba users and DHCP leases - and they could be collected and combined from multiple systems, but this would have to be done by a custom module.<br /><br />&nbsp;- Jamie<br /><br />

On 04/Mar/2008 10:04 Marco Rebsamen wrote ..
> 
> Hi
> 
> I was always wondering why i got multiple entrys for a single host, when i 
> list the active Leses. As i read in the man page of the leases file, an 
> additional entry is addet when a host renews or aqquires an Adress.
> 
> Wouldn't it be possible to just show ONE entry for every Host ?

That is actually what is supposed to happen - only entries for which
the end time has not already passed should be displayed. Does your leases
file contain more than one lease that is valid for the current time for
each host?

 - Jamie

Yes... As I understand the leasfile manpage there's always a new entry for 
every action the client sends. So if the client extends its lease it adds a 
new entry:

192.168.1.191	wave-master	2008/03/04 20:27:22	2008/03/04 21:57:22
192.168.1.191	wave-master	2008/03/04 21:12:22	2008/03/04 22:42:22

I've got a leastime of 1 1/2h, so i got these 2 entrys for the extension...



Am Dienstag, 4. März 2008 21:23:45 schrieb Jamie Cameron:
> On 04/Mar/2008 10:04 Marco Rebsamen wrote ..
>
> > Hi
> >
> > I was always wondering why i got multiple entrys for a single host, when
> > i list the active Leses. As i read in the man page of the leases file, an
> > additional entry is addet when a host renews or aqquires an Adress.
> >
> > Wouldn't it be possible to just show ONE entry for every Host ?
>
> That is actually what is supposed to happen - only entries for which
> the end time has not already passed should be displayed. Does your leases
> file contain more than one lease that is valid for the current time for
> each host?
>
>  - Jamie
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> -
> Forwarded by the Webmin development list at webmin-devel@...
> To remove yourself from this list, go to
> http://lists.sourceforge.net/lists/listinfo/webadmin-devel
>
> --
> Diese Nachricht wurde auf Viren und andere gefährliche Inhalte untersucht
> und ist - aktuelle Virenscanner vorausgesetzt - sauber.
> For all your IT requirements visit: http://www.transtec.co.uk



--
Diese Nachricht wurde auf Viren und andere gefährliche Inhalte untersucht
und ist - aktuelle Virenscanner vorausgesetzt - sauber.
For all your IT requirements visit: http://www.transtec.co.uk