slackel-main Mailing List for slackel

Hi

I am on "Linux Slackel.synergy.local 5.15.12 #1 SMP PREEMPT Wed Dec 29 12:53:24 CST 2021 x86_64 Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz GenuineIntel GNU/Linux".
Somehow I messed up the repositories of slackpkg, slapt and sourcery.

Please help me to fix those using the correct repos for Slackel.


Regards

Nataraj 

After entering the password...it does nothing!

I also tried it at konsole. Same results. After entering the kdesu
password, it just drops me at the bash.
G.

http://www.slackel.gr/forum/viewtopic.php?f=7&t=580

(Slackel Startup Guide) All 3 links are dead! (404 Not Found).

Bye!  :-)
G.

Καλή Χρονιά Δημήτρη!!!  ;-)
(Ακαδημαϊκή κλπ).
Γιώργος.

Hi, Didier.

source file for project is here 
http://www.slackel.gr/repo/source/slackel-source/slackel-live-usb-installer-1.0/

You need the SLKBUILD for building the package and also the source 
package 
http://www.slackel.gr/repo/source/slackel-source/slackel-live-usb-installer-1.0/instonusb-1.0.tar.bz2 


extract it.  The install_iso_on_usb.sh bash script is called which do 
the installation to usb stick. In this file there are also functions for 
further development for adding persistent file creation encrypting 
persistent file in the future.

I tried to make the tool to work with both slackel and salix isos which 
is done. So, i tested it in a usb using vfat for installing 
slackellive-openbox-7.1.iso (32 bit) and salixlive64-xfce-14.2.1.iso (64bit)

In both cases usb booted in live environment.

Have a good day

Dimitris


Στις 8/3/19 11:01 π.μ., ο Didier Spaier έγραψε:
> Hello Dimitris,
>
> I just completed the translation into French of this resource on
> Transifex but need to read the source script to check its accuracy.
> Where is it?
>
> Best,
>
> Didier

Granted correct to gparted


Στις 23/08/2018 03:56 μμ, ο Dimitris Tzemos έγραψε:
> http://www.slackel.gr/forum/viewtopic.php?f=4&t=194#p289
> Always format with granted or cgdisk a partition where another distro 
> was installed. Be sure to unmount partition before format it. If it is 
> mounted.
>
>
> Στις Πέμ, 23 Αυγ 2018 - 15:16 ο χρήστης Dimitris Tzemos 
> <di...@gm... <mailto:di...@gm...>> έγραψε:
>
>     Hi
>     This is an old version. From what I remember there was no problem
>     with installation.
>     If it is the installation iso then the partition you will install
>     the slackel have to be clean. Just format it before run the
>     installer.
>     Because of spammers forum registration has been disabled. Can
>     register to forum and also send an email to dijemos@gmail. com
>     with the user name used for registration to manually enable the
>     account.
>     I suggest to download latest 7.1 beta openbox version. It is fast
>     and run fine.
>     Dimitris_tzemos
>     Δεν με ενοχλείς οπότε θέλεις στείλε  Email
>
>
>     Στις Πέμ, 23 Αυγ 2018 - 14:45 ο χρήστης Γιώργος Κωστόπουλος
>     <gio...@gm... <mailto:gio...@gm...>> έγραψε:
>
>         Hi! :-)
>
>         1) I just downloaded the last x64 KDE edition.
>         Checked SHA sig > OK -> burned to a DVD  -.> verified -> OK
>         ->  reboot
>         to it -> Installation.
>         Seems like the DVD has problems (despite the ISO and burner
>         verification).
>
>         It brings me (during the installation) a message that the time
>         zone
>         package is corrupted.
>
>         Is there any way to check all packages hashes?
>
>          2) Partition quick formatting seems to be broken.
>         It didn't format the selected partition. After installation I
>         could
>         locate files from previous installation (from another distro).
>
>         I'm not sure that this bug sould be reported here. I tried
>         Slackware
>         and it has the same problem.
>         Probably an upstream error.
>
>         3) Forum registration is broken and ticket tracker is disabled.
>         Δημήτρη σου 'χα στείλει σχετικό mail και παλιότερα.
>         Ελπίζω να μη σε πρήζω, με τα ίδια και τα ίδια! :-)
>
>         Bye! :-)
>         G.
>
>         ------------------------------------------------------------------------------
>         Check out the vibrant tech community on one of the world's most
>         engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>         _______________________________________________
>         Slackel-main mailing list
>         Sla...@li...
>         <mailto:Sla...@li...>
>         https://lists.sourceforge.net/lists/listinfo/slackel-main
>

http://www.slackel.gr/forum/viewtopic.php?f=4&t=194#p289
Always format with granted or cgdisk a partition where another distro was
installed. Be sure to unmount partition before format it. If it is mounted.


Στις Πέμ, 23 Αυγ 2018 - 15:16 ο χρήστης Dimitris Tzemos <di...@gm...>
έγραψε:

> Hi
> This is an old version. From what I remember there was no problem with
> installation.
> If it is the installation iso then the partition you will install the
> slackel have to be clean. Just format it before run the installer.
> Because of spammers forum registration has been disabled. Can register to
> forum and also send an email to dijemos@gmail. com with the user name
> used for registration to manually enable the account.
> I suggest to download latest 7.1 beta openbox version. It is fast and run
> fine.
> Dimitris_tzemos
> Δεν με ενοχλείς οπότε θέλεις στείλε  Email
>
>
> Στις Πέμ, 23 Αυγ 2018 - 14:45 ο χρήστης Γιώργος Κωστόπουλος <
> gio...@gm...> έγραψε:
>
>> Hi! :-)
>>
>> 1) I just downloaded the last x64 KDE edition.
>> Checked SHA sig > OK -> burned to a DVD  -.> verified -> OK ->  reboot
>> to it -> Installation.
>> Seems like the DVD has problems (despite the ISO and burner verification).
>>
>> It brings me (during the installation) a message that the time zone
>> package is corrupted.
>>
>> Is there any way to check all packages hashes?
>>
>>  2) Partition quick formatting seems to be broken.
>> It didn't format the selected partition. After installation I could
>> locate files from previous installation (from another distro).
>>
>> I'm not sure that this bug sould be reported here. I tried Slackware
>> and it has the same problem.
>> Probably an upstream error.
>>
>> 3) Forum registration is broken and ticket tracker is disabled.
>> Δημήτρη σου 'χα στείλει σχετικό mail και παλιότερα.
>> Ελπίζω να μη σε πρήζω, με τα ίδια και τα ίδια! :-)
>>
>> Bye! :-)
>> G.
>>
>>
>> ------------------------------------------------------------------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Slackel-main mailing list
>> Sla...@li...
>> https://lists.sourceforge.net/lists/listinfo/slackel-main
>>
>

Hi
This is an old version. From what I remember there was no problem with
installation.
If it is the installation iso then the partition you will install the
slackel have to be clean. Just format it before run the installer.
Because of spammers forum registration has been disabled. Can register to
forum and also send an email to dijemos@gmail. com with the user name used
for registration to manually enable the account.
I suggest to download latest 7.1 beta openbox version. It is fast and run
fine.
Dimitris_tzemos
Δεν με ενοχλείς οπότε θέλεις στείλε  Email


Στις Πέμ, 23 Αυγ 2018 - 14:45 ο χρήστης Γιώργος Κωστόπουλος <
gio...@gm...> έγραψε:

> Hi! :-)
>
> 1) I just downloaded the last x64 KDE edition.
> Checked SHA sig > OK -> burned to a DVD  -.> verified -> OK ->  reboot
> to it -> Installation.
> Seems like the DVD has problems (despite the ISO and burner verification).
>
> It brings me (during the installation) a message that the time zone
> package is corrupted.
>
> Is there any way to check all packages hashes?
>
>  2) Partition quick formatting seems to be broken.
> It didn't format the selected partition. After installation I could
> locate files from previous installation (from another distro).
>
> I'm not sure that this bug sould be reported here. I tried Slackware
> and it has the same problem.
> Probably an upstream error.
>
> 3) Forum registration is broken and ticket tracker is disabled.
> Δημήτρη σου 'χα στείλει σχετικό mail και παλιότερα.
> Ελπίζω να μη σε πρήζω, με τα ίδια και τα ίδια! :-)
>
> Bye! :-)
> G.
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Slackel-main mailing list
> Sla...@li...
> https://lists.sourceforge.net/lists/listinfo/slackel-main
>

Hi! :-)

1) I just downloaded the last x64 KDE edition.
Checked SHA sig > OK -> burned to a DVD  -.> verified -> OK ->  reboot
to it -> Installation.
Seems like the DVD has problems (despite the ISO and burner verification).

It brings me (during the installation) a message that the time zone
package is corrupted.

Is there any way to check all packages hashes?

 2) Partition quick formatting seems to be broken.
It didn't format the selected partition. After installation I could
locate files from previous installation (from another distro).

I'm not sure that this bug sould be reported here. I tried Slackware
and it has the same problem.
Probably an upstream error.

3) Forum registration is broken and ticket tracker is disabled.
Δημήτρη σου 'χα στείλει σχετικό mail και παλιότερα.
Ελπίζω να μη σε πρήζω, με τα ίδια και τα ίδια! :-)

Bye! :-)
G.

 Hi,
After 14 years with RedHat 7 & Fedora 6 my power supply died and I was
forced to buy a new box. I tried more than 10 distros, one worse than
the other. Fedora does not allow you access to a command line, you can
not install knoppix and cento, scientific linux does not allow you to
disable bluetooth and install KDE, mint provides non-working gcc and
vi. Just to name a few.
I was attracted by the Greek name "mageia" and installed it, just to
have an editor and a an openoffice. The thing provdes gdb, ld, ldd, cpp
but no gcc. This is strange. I cannot find a way to contact anyone frommageia.
What I need first and foremost is a working gcc. I can install all other
stuff I need if I have gcc. Then, I need the C shell, I have dozens of
scripts written in C, many go back to the 1980s from my time with Unix.
Essential is also the ability to install wine, I have dozens of *.exe
files, technical stuff that have no linux versions, I have wiped out
windowz. And, I need KDE. And vi.
Looking around for a system that would satisfy me I was atracted by the
Greek name of Slackel's creator. I got the latest advertised version
and using "rufus" on a windowz box I created an ISO image on a USB
stick. Slackel looks promising and I tried to install it.
Here starts the trouble. I use six partitions, /, /usr, /usr/local, /var, /tmp,/home; boot and swap go without mentioning.
I have a one Tbyte disk, 300 Gbytes of which are taken by mageia which
I will keep until I have something else; 600 Gbytes are free to be used.
Now, Slackel's installer ignores the large uncommited space and insists
on installing in mageia's /home partition. And I see no way of changing
it. Further, this installer seems to want to have just one ext3 partition
plus a swap area. For safety reasons I need the six partitions.
If I am doing something wrong, what is it, please!!??
Other questions I would like to ask are:
Slackel does not have rpm. Is there anything equivalent? I guess, I can
install and use rpm!!??
It looks like Slackel does not include bluetooth which seems strange.
I thought google & facebook forced all distros to include it which is
essentially a spy-tool. I do not want to have bluetooth, my box is
in a Faraday cage and I heavily filter and isolate the power cord and
all cables. google and facebook are the danger, not the government.
Another point is the ability to print. There is no lp or lpr installed
and from the gui I can only print to a pdf file. What is the problem!!??
There is a ".operator" file in the home subdir. What is this for,
please!!??
I appreciate the ability to have the C shell but I find only csh.login
in the /etc subdir. Normally, there are two more files there, csh.cshrc
and one more whose name does not come to mind right now.
Finally, the keyboard layouts. KDE provides the abillity to change the
layout. I write mainly in English but also often in German and lessin French, Spanish and Greek. I could not find the way to change thekeybord layout.
I very much appreciate the Greek polytonikon system.
A response, any response will be greatly appreciated.
I thank you!

Spyros.

can do the same from gslapt gui



On 02/06/2016 01:56 μμ, Jeffrey Needle wrote:
> Where is udev?  I can't find it in the system, and I can't install apps
> like Calibre without it.  Can someone help?  Many thanks again!
>
>
> ------------------------------------------------------------------------------
> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
> patterns at an interface-level. Reveals which users, apps, and protocols are
> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
> J-Flow, sFlow and other flows. Make informed decisions using capacity
> planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
> _______________________________________________
> Slackel-main mailing list
> Sla...@li...
> https://lists.sourceforge.net/lists/listinfo/slackel-main

there is no udev it is eudev.

To install calibre

sudo slapt-get -u

sudo slapt-get -i calibre




On 02/06/2016 01:56 μμ, Jeffrey Needle wrote:
> Where is udev?  I can't find it in the system, and I can't install apps
> like Calibre without it.  Can someone help?  Many thanks again!
>
>
> ------------------------------------------------------------------------------
> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
> patterns at an interface-level. Reveals which users, apps, and protocols are
> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
> J-Flow, sFlow and other flows. Make informed decisions using capacity
> planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
> _______________________________________________
> Slackel-main mailing list
> Sla...@li...
> https://lists.sourceforge.net/lists/listinfo/slackel-main

You dont to access the file at root level

it is in users level

just type leafpad ~/.config/fbpanel/default



On 02/06/2016 11:40 μμ, Jeffrey Needle wrote:
> Thanks.  I'd love to do these things, but I need to access the file at 
> root level.  Could I trouble you to tell me how to start Leafpad as 
> root?  Or is there some other editor I need to invoke?  Sorry to be so 
> dense.  Thanks again.
>
> On Thu, Jun 2, 2016 at 8:36 PM Dimitris Tzemos <di...@gm... 
> <mailto:di...@gm...>> wrote:
>
>     edit file ~/.config/fbpanel/default
>
>     Find line 376 # Digital Clock
>     Plugin {
>          type = dclock
>          config {
>
>              ShowSeconds = false
>              HoursView = 24
>              TooltipFmt = %A %x
>              #Action = xmessage Please define some command &
>          }
>     }
>
>     full time change ShowSeconds = false to ShowSeconds = true
>
>     TooltipFmt = %A %x can change it as you like e.g. %D %F etc
>
>     Add
>     ClockFmt = <b>%I:%M</b> or change i as you like. before ShowSeconds =
>     false line
>
>
>     On the same file line 203 and bellow can change it as you like e.g.
>     add thunderbird
>       button {
>                  icon = thunderbird
>                  tooltip = Mail client
>                  action = thunderbird
>              }
>
>     add google-chrome
>
>          button {
>                  icon = product_logo_64
>                  tooltip = Google Chrome
>                  action = google-chrome-stable
>              }
>
>     Note: copy the icons to /usr/share/pixmaps to appear in panel.
>     sudo cp /opt/google/chrome/product_logo_64.png /usr/share/pixmaps/
>
>     On 02/06/2016 01:45 μμ, Jeffrey Needle wrote:
>     > Just downloaded the distro, 64-bit.  I need to customize the panel.
>     >
>     > 1.  How do I modify the time format?  I need date, full time, etc.
>     >
>     > 2.  How do I delete launchers and add new ones?  I need to add
>     > Google-Chrome and Thunderbird.
>     >
>     > Thanks.
>     >
>     >
>     >
>     ------------------------------------------------------------------------------
>     > What NetFlow Analyzer can do for you? Monitors network bandwidth
>     and traffic
>     > patterns at an interface-level. Reveals which users, apps, and
>     protocols are
>     > consuming the most bandwidth. Provides multi-vendor support for
>     NetFlow,
>     > J-Flow, sFlow and other flows. Make informed decisions using
>     capacity
>     > planning reports.
>     https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
>     > _______________________________________________
>     > Slackel-main mailing list
>     > Sla...@li...
>     <mailto:Sla...@li...>
>     > https://lists.sourceforge.net/lists/listinfo/slackel-main
>
>
>     ------------------------------------------------------------------------------
>     What NetFlow Analyzer can do for you? Monitors network bandwidth
>     and traffic
>     patterns at an interface-level. Reveals which users, apps, and
>     protocols are
>     consuming the most bandwidth. Provides multi-vendor support for
>     NetFlow,
>     J-Flow, sFlow and other flows. Make informed decisions using capacity
>     planning reports.
>     https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
>     _______________________________________________
>     Slackel-main mailing list
>     Sla...@li...
>     <mailto:Sla...@li...>
>     https://lists.sourceforge.net/lists/listinfo/slackel-main
>

sudo leafpad ~/.config/fbpanel/default

or

sudo geany ~/.config/fbpanel/default



On 02/06/2016 11:40 μμ, Jeffrey Needle wrote:
> Thanks.  I'd love to do these things, but I need to access the file at 
> root level.  Could I trouble you to tell me how to start Leafpad as 
> root?  Or is there some other editor I need to invoke?  Sorry to be so 
> dense.  Thanks again.
>
> On Thu, Jun 2, 2016 at 8:36 PM Dimitris Tzemos <di...@gm... 
> <mailto:di...@gm...>> wrote:
>
>     edit file ~/.config/fbpanel/default
>
>     Find line 376 # Digital Clock
>     Plugin {
>          type = dclock
>          config {
>
>              ShowSeconds = false
>              HoursView = 24
>              TooltipFmt = %A %x
>              #Action = xmessage Please define some command &
>          }
>     }
>
>     full time change ShowSeconds = false to ShowSeconds = true
>
>     TooltipFmt = %A %x can change it as you like e.g. %D %F etc
>
>     Add
>     ClockFmt = <b>%I:%M</b> or change i as you like. before ShowSeconds =
>     false line
>
>
>     On the same file line 203 and bellow can change it as you like e.g.
>     add thunderbird
>       button {
>                  icon = thunderbird
>                  tooltip = Mail client
>                  action = thunderbird
>              }
>
>     add google-chrome
>
>          button {
>                  icon = product_logo_64
>                  tooltip = Google Chrome
>                  action = google-chrome-stable
>              }
>
>     Note: copy the icons to /usr/share/pixmaps to appear in panel.
>     sudo cp /opt/google/chrome/product_logo_64.png /usr/share/pixmaps/
>
>     On 02/06/2016 01:45 μμ, Jeffrey Needle wrote:
>     > Just downloaded the distro, 64-bit.  I need to customize the panel.
>     >
>     > 1.  How do I modify the time format?  I need date, full time, etc.
>     >
>     > 2.  How do I delete launchers and add new ones?  I need to add
>     > Google-Chrome and Thunderbird.
>     >
>     > Thanks.
>     >
>     >
>     >
>     ------------------------------------------------------------------------------
>     > What NetFlow Analyzer can do for you? Monitors network bandwidth
>     and traffic
>     > patterns at an interface-level. Reveals which users, apps, and
>     protocols are
>     > consuming the most bandwidth. Provides multi-vendor support for
>     NetFlow,
>     > J-Flow, sFlow and other flows. Make informed decisions using
>     capacity
>     > planning reports.
>     https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
>     > _______________________________________________
>     > Slackel-main mailing list
>     > Sla...@li...
>     <mailto:Sla...@li...>
>     > https://lists.sourceforge.net/lists/listinfo/slackel-main
>
>
>     ------------------------------------------------------------------------------
>     What NetFlow Analyzer can do for you? Monitors network bandwidth
>     and traffic
>     patterns at an interface-level. Reveals which users, apps, and
>     protocols are
>     consuming the most bandwidth. Provides multi-vendor support for
>     NetFlow,
>     J-Flow, sFlow and other flows. Make informed decisions using capacity
>     planning reports.
>     https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
>     _______________________________________________
>     Slackel-main mailing list
>     Sla...@li...
>     <mailto:Sla...@li...>
>     https://lists.sourceforge.net/lists/listinfo/slackel-main
>

Thanks.  I'd love to do these things, but I need to access the file at root
level.  Could I trouble you to tell me how to start Leafpad as root?  Or is
there some other editor I need to invoke?  Sorry to be so dense.  Thanks
again.

On Thu, Jun 2, 2016 at 8:36 PM Dimitris Tzemos <di...@gm...> wrote:

> edit file ~/.config/fbpanel/default
>
> Find line 376 # Digital Clock
> Plugin {
>      type = dclock
>      config {
>
>          ShowSeconds = false
>          HoursView = 24
>          TooltipFmt = %A %x
>          #Action = xmessage Please define some command &
>      }
> }
>
> full time change ShowSeconds = false to ShowSeconds = true
>
> TooltipFmt = %A %x can change it as you like e.g. %D %F etc
>
> Add
> ClockFmt = <b>%I:%M</b> or change i as you like. before ShowSeconds =
> false line
>
>
> On the same file line 203 and bellow can change it as you like e.g.
> add thunderbird
>   button {
>              icon = thunderbird
>              tooltip = Mail client
>              action = thunderbird
>          }
>
> add google-chrome
>
>      button {
>              icon = product_logo_64
>              tooltip = Google Chrome
>              action = google-chrome-stable
>          }
>
> Note: copy the icons to /usr/share/pixmaps to appear in panel.
> sudo cp /opt/google/chrome/product_logo_64.png /usr/share/pixmaps/
>
> On 02/06/2016 01:45 μμ, Jeffrey Needle wrote:
> > Just downloaded the distro, 64-bit.  I need to customize the panel.
> >
> > 1.  How do I modify the time format?  I need date, full time, etc.
> >
> > 2.  How do I delete launchers and add new ones?  I need to add
> > Google-Chrome and Thunderbird.
> >
> > Thanks.
> >
> >
> >
> ------------------------------------------------------------------------------
> > What NetFlow Analyzer can do for you? Monitors network bandwidth and
> traffic
> > patterns at an interface-level. Reveals which users, apps, and protocols
> are
> > consuming the most bandwidth. Provides multi-vendor support for NetFlow,
> > J-Flow, sFlow and other flows. Make informed decisions using capacity
> > planning reports.
> https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
> > _______________________________________________
> > Slackel-main mailing list
> > Sla...@li...
> > https://lists.sourceforge.net/lists/listinfo/slackel-main
>
>
>
> ------------------------------------------------------------------------------
> What NetFlow Analyzer can do for you? Monitors network bandwidth and
> traffic
> patterns at an interface-level. Reveals which users, apps, and protocols
> are
> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
> J-Flow, sFlow and other flows. Make informed decisions using capacity
> planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
> _______________________________________________
> Slackel-main mailing list
> Sla...@li...
> https://lists.sourceforge.net/lists/listinfo/slackel-main
>

edit file ~/.config/fbpanel/default

Find line 376 # Digital Clock
Plugin {
     type = dclock
     config {

         ShowSeconds = false
         HoursView = 24
         TooltipFmt = %A %x
         #Action = xmessage Please define some command &
     }
}

full time change ShowSeconds = false to ShowSeconds = true

TooltipFmt = %A %x can change it as you like e.g. %D %F etc

Add
ClockFmt = <b>%I:%M</b> or change i as you like. before ShowSeconds = 
false line


On the same file line 203 and bellow can change it as you like e.g.
add thunderbird
  button {
             icon = thunderbird
             tooltip = Mail client
             action = thunderbird
         }

add google-chrome

     button {
             icon = product_logo_64
             tooltip = Google Chrome
             action = google-chrome-stable
         }

Note: copy the icons to /usr/share/pixmaps to appear in panel.
sudo cp /opt/google/chrome/product_logo_64.png /usr/share/pixmaps/

On 02/06/2016 01:45 μμ, Jeffrey Needle wrote:
> Just downloaded the distro, 64-bit.  I need to customize the panel.
>
> 1.  How do I modify the time format?  I need date, full time, etc.
>
> 2.  How do I delete launchers and add new ones?  I need to add
> Google-Chrome and Thunderbird.
>
> Thanks.
>
>
> ------------------------------------------------------------------------------
> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
> patterns at an interface-level. Reveals which users, apps, and protocols are
> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
> J-Flow, sFlow and other flows. Make informed decisions using capacity
> planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
> _______________________________________________
> Slackel-main mailing list
> Sla...@li...
> https://lists.sourceforge.net/lists/listinfo/slackel-main

Where is udev?  I can't find it in the system, and I can't install apps 
like Calibre without it.  Can someone help?  Many thanks again!

Just downloaded the distro, 64-bit.  I need to customize the panel.

1.  How do I modify the time format?  I need date, full time, etc.

2.  How do I delete launchers and add new ones?  I need to add 
Google-Chrome and Thunderbird.

Thanks.