Nagios Plugins

Hi all.

Is there a check_nt plugin version that returns OUTPUT in performance dat=
a format?

Regards,

Wilson

Hi all. 

I've upgraded from nagios-plugins 1.3.1 to nagios-plugins-1.4.0alpha1-1. =
But I got problems with check_nt. 

This is the command line: 

command_line $USER1$/check_nt -H $HOSTADDRESS$ -p 1248 -v USEDDISKSPACE -=
l $ARG1$ -w $ARG2$ -c $ARG3$ 

Now, one of the check commands: 

check_command check_nt_disk!C!90!95 

But all I'm getting is:

wrong -l argument 

The check_nt help says to use only the drive letter. Using the drive lett=
er followed by ":" I got: 

[root@... libexec]# ./check_nt -H 10.109.0.11 -p 1248 -v USEDDISKSPAC=
E -l C: -w 90 -c 95 C::\ - total: 2.93 Gb - used: 1.06 Gb (36%) - free 1.=
87 Gb (64%) 

Must I change all the check commands to check_nt_disk!C:!90!95 ??? Or the=
re is an other check_nt version? 

Regards, 

Wilson

Hello,

Which is best way to monitor Oracle server? via SNMP or NRPE?

An is there a good example or plugin to monitor Oracle via SNMP?

Thanks.

Folks,
Relatively new to nagios and  a little confused by the -s ( or -r/R) flags.
I understood they pattern matched a string from the content of a page.
However they appear to return a status of ok regardless of the string I
enter
Please see bellow

bash-2.03# ./check_http -I <IPADDRESS> -s "Ratings"
HTTP ok: HTTP/1.1 302 Found -   0.033 second response time |time=  0.033
bash-2.03# ./check_http -I  <IPADDRESS> -s "thisstringdoesnotexist"
HTTP ok: HTTP/1.1 302 Found -   0.031 second response time |time=  0.031
bash-2.03#

Am I being spectacularly dim here or is this a bug ?
version is ...

bash-2.03# ./check_http -V
check_http (nagios-plugins 1.3.0) 1.24
The nagios plugins come with ABSOLUTELY NO WARRANTY. You may redistribute
copies of the plugins under the terms of the GNU General Public License.
For more information about these matters, see the file named COPYING.
bash-2.03#

cheers


********************************************
 Mark Barnes
 Unix System Administrator
 ********************************************

**********************************************************************************
This email may contain confidential material. If you were not an
intended recipient, please notify the sender and delete all copies.
We may monitor email to and from our network.

hello

when i use check_procs -C <process> on AIX 5.1 it return 0 process .
With the ps command this process exist.
Where is the problem.
with check_procs version 1.3.1 i have the same problem but the proces i 
want to test is 'not parseable' ???

Thanks

Philippe LEBRETON

i want to use the check_flexlm command for license managers but it is not 
working.
normally using lmstat command i can find out the staistics about a license 
by using the following:

lmstat port no@... 

how can i implement it in nagios because in nagios it asks for the path to 
the file i.e. license.dat and does not use this.

can someone please explain about how to use it and how to write the 
command in the checkcommands.cfg file to use with nagios.

regards,
Subhadeep

hi,
i got ur id from nagios help group.
i am new to NAGIOS and find it very interesting.
thuogh i have studied documentation regarding NAGIOS
installation but i wasnt that much clear.

so could u just clear my following doubt.
1.i have installed nagios in one computer(say
computer1) and it has got no problem.This act as as
NAGIOS console or the NAGIOS server.

2.Now if i have to know the status of other computer 
(say computer 2)then
 do i have to installed Full nagios in that computer  
too(computer 2) or just the plugins NRPE.


i hope u will reply soon.


________________________________________________________________________
Yahoo! India Careers: Over 65,000 jobs online
Go to: http://yahoo.naukri.com/

I want to use the new plugin check_pop3.c submitted by Seamus Dean.

So, i copied check_pop3.c in /nagios-plugins-1.4.0alpha1/plugins and 
execute 'make' to compile it, but i have this error:
$ make check_pop3
gcc -g -O2  -L. -L/usr/local/ssl//lib  check_pop3.c   -o check_pop3
Undefined                       first referenced
 symbol                             in file
socket                              /var/tmp//ccEuubjD.o
gethostbyname                       /var/tmp//ccEuubjD.o
gethostbyaddr                       /var/tmp//ccEuubjD.o
connect                             /var/tmp//ccEuubjD.o
ld: fatal: Symbol referencing errors. No output written to check_pop3
collect2: ld returned 1 exit status
make: *** [check_pop3] Error 1

Can someone help me, please?

Carole.

what do u mean by status of the 2nd computer. what do you want to do 
actually?
if your 2nd computer is also connected on the same network you can access 
it through the 1st one itself.

regards,
Subhadeep

On Tue, 2004-07-20 at 21:11, M3 Freak wrote:
> Hi all,
> 
> I'm trying to use the "check_rpc" plugin to check the status of NFS
> running on a server.  I've read the documentation for the plugin and
> tested it in a terminal, like so:
> 
> /usr/lib/nagios/plugins/check_rpc -H localhost -C nfs
> /usr/lib/nagios/plugins/check_rpc -H localhost -C nfs -p 2049
> /usr/lib/nagios/plugins/check_rpc -H localhost -C nfs -p 2049 -u
> /usr/lib/nagios/plugins/check_rpc -H localhost -C nfs -p 2049 -t
> 
> No matter how I run it, the program returns this:
> 
> Can't fork for rpcinfo: No such file or directory
[snip]

Anyone have any ideas?  I would like to use the nfs plugin, but so far
no luck.  I would really appreciate any tips or hints.

Thanks,

Ranbir

-- 
Ranbir
Systems Aligned Inc.
 http://www.systemsaligned.com

I'm trying to get disk utilization info from Windows
2000 box using SNMP. I have compiled the plugin with
Net::SNMP support and I know it can be done with
check_disk_snmp.pl file but I'm not sure about the
syntax to use with this command and also I read
somewhere in this mailing list that this can't be done
on Windows boxes.

Any help would be appreciated.

Thank you
Ajit


	
		
__________________________________
Do you Yahoo!?
Vote for the stars of Yahoo!'s next ad campaign!
http://advision.webevents.yahoo.com/yahoo/votelifeengine/

cd .. && \
  /bin/sh /users/stage/frq03383/nagios/nagios-plugins-1.4.0alpha1/missing 
--run automake-1.7 --gnu  plugins/Makefile
configure.in:6: version mismatch.  This is Automake 1.7.8,
configure.in:6: but the definition used by this AM_INIT_AUTOMAKE
configure.in:6: comes from Automake 1.7.9.  You should recreate
configure.in:6: aclocal.m4 with aclocal and run automake again.
make[2]: *** [Makefile.in] Erreur 1
make[2]: Quitte le r\x{FFFF}\x{FFFF}pertoire 
`/users/stage/frq03383/nagios/nagios-plugins-1.4.0alpha1/plugins'
make[1]: *** [all-recursive] Erreur 1
make[1]: Quitte le r\x{FFFF}\x{FFFF}pertoire 
`/users/stage/frq03383/nagios/nagios-plugins-1.4.0alpha1'
make: *** [all] Erreur 2



i am trying to install nagios-plugins-1.4.0alpha1 with nagios-1.2 version 
and i get this error.

i have tried installing the other plugins and i always get an error. could 
someone tell me how to solve this error and/or which version of nagios 
should i use along with which plugin that will work properly. i am runing 
linux-fedora-code1 operating system.

thanks,
subhadeep

I wrote a perl script that takes all the arguments that are in the
default notify_by_email command and an additional argument of max number
of notifications.  If the max number becomes greater than the current
notification number, nothing goes out.  I then substituted that perl
script for the current notify_by_email piped printf command.

-=3DKevin=3D-

> -----Original Message-----
> From: nagiosplug-help-admin@...
[mailto:nagiosplug-help-
> admin@...] On Behalf Of Jonathan Soong
> Sent: Tuesday, July 20, 2004 9:47 PM
> To: Nagiosplug-help@...
> Subject: [Nagiosplug-help] too many alerts
>=20
> Hi guys
>=20
> I'm sure someone else has done this before.
>=20
> We just upgraded the switch that the machine nagios is on is connected
> to. I forgot to stop nagios before this happened and subsequently
> received about 35 SMS messages.
>=20
> Is there a way to limit the number of alerts that can be sent in a
given
> time frame?
>=20
> Cheers
>=20
> Jon
> --
> Jonathan Soong
> Information Services
> Institute of Medical and Veterinary Science (IMVS)
> Email:   jon.soong@...
> Web  :   http://www.imvs.sa.gov.au
> Tel  :   +61 8 82223095
> Fax  :   +61 8 82223147
>=20
>=20
>=20
>=20
> -------------------------------------------------------
> This SF.Net email is sponsored by BEA Weblogic Workshop
> FREE Java Enterprise J2EE developer tools!
> Get your free copy of BEA WebLogic Workshop 8.1 today.
> http://ads.osdn.com/?ad_id=3D4721&alloc_id=3D10040&op=3Dclick
> _______________________________________________
> Nagiosplug-help mailing list
> Nagiosplug-help@...
> https://lists.sourceforge.net/lists/listinfo/nagiosplug-help
> ::: Please include plugins version (-v) and OS when reporting any
issue.
> ::: Messages without supporting info will risk being sent to /dev/null

I'm running nagios 1.2 on a red hat enterprise 3 server with plugin
version 1.3.1 and nrpe 2.0 running on a unix test machine and nrpe_NT
running on a windows xp test machine. All my regular checks are working
but the nrpe checks are not.

        The NRPE NT checks all return "no output available" even though
they run successfully on the windows NRPE machine itself. The NRPE
checks returne "NRPE: Unable to read output" even though the
checks are successful on the Sun NRPE machine.
      I have no idea what is going wrong between them here, but any advice
would be appreciated. I haven't been working with linux/unix very
long, so please bare with me. Thank you and God bless.

Josh Wales

Hi guys

I'm sure someone else has done this before.

We just upgraded the switch that the machine nagios is on is connected 
to. I forgot to stop nagios before this happened and subsequently 
received about 35 SMS messages.

Is there a way to limit the number of alerts that can be sent in a given 
time frame?

Cheers

Jon
-- 
Jonathan Soong
Information Services
Institute of Medical and Veterinary Science (IMVS)
Email:   jon.soong@...
Web  :   http://www.imvs.sa.gov.au
Tel  :   +61 8 82223095
Fax  :   +61 8 82223147

On Tue, Jul 20, 2004 at 08:22:45PM -0400, Steve Rieger wrote:
> Is there a tool/plugin that will allow me to import a list of 1000 or more
> servers into nagios,=20
A simple perl / awk / shell script is usually up to the task. You can usual=
ly complete one in 5 lines or less.

-Jason Martin

--=20
Oxymoron: Standard deviation.
This message is PGP/MIME signed.