below is the requested output. also interesting is that i've completely
uninstalled the lirc package and yet the volume control on the remote
still affects pulseaudio
in addition to what you asked for, here is some modprobe lists just in
case it helps
modprobe -l | grep -i lirc
kernel/drivers/media/rc/keymaps/rc-lirc.ko
kernel/drivers/media/rc/lirc_dev.ko
kernel/drivers/media/rc/ir-lirc-codec.ko
kernel/drivers/staging/lirc/lirc_bt829.ko
kernel/drivers/staging/lirc/lirc_igorplugusb.ko
kernel/drivers/staging/lirc/lirc_imon.ko
kernel/drivers/staging/lirc/lirc_it87.ko
kernel/drivers/staging/lirc/lirc_ite8709.ko
kernel/drivers/staging/lirc/lirc_sasem.ko
kernel/drivers/staging/lirc/lirc_serial.ko
kernel/drivers/staging/lirc/lirc_sir.ko
kernel/drivers/staging/lirc/lirc_ttusbir.ko
kernel/drivers/staging/lirc/lirc_zilog.ko
modprobe -l | grep -i imon
kernel/drivers/media/rc/keymaps/rc-imon-mce.ko
kernel/drivers/media/rc/keymaps/rc-imon-pad.ko
kernel/drivers/media/rc/imon.ko
kernel/drivers/staging/lirc/lirc_imon.ko
ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event4) with:
Driver imon, table rc-imon-mce
Supported protocols: RC-6
Enabled protocols: RC-6
Repeat delay = 500 ms, repeat period = 33 ms
dmesg output is:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-8-generic (buildd@...) (gcc
version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11
03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005ff90000 (usable)
[ 0.000000] BIOS-e820: 000000005ff90000 - 000000005ff9e000 (ACPI
data)
[ 0.000000] BIOS-e820: 000000005ff9e000 - 000000005ffe0000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 000000005ffe0000 - 000000005ffee000
(reserved)
[ 0.000000] BIOS-e820: 000000005fff0000 - 0000000060000000
(reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000
(reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000
(reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000
(reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled
in hardware: non-PAE kernel!
[ 0.000000] NX (Execute Disable) protection: approximated by x86
segment limits
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M3N78-EM,
BIOS 0415 09/16/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] last_pfn = 0x5ff90 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @
1bfb000-1c00000
[ 0.000000] RAMDISK: 373b7000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 3677e000 - 373b6f7d
[ 0.000000] Move RAMDISK from 00000000373b7000 - 0000000037feff7c to
3677e000 - 373b6f7c
[ 0.000000] ACPI: RSDP 000fb6b0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 5ff90000 00044 (v01 091608 RSDT1442 20080916
MSFT 00000097)
[ 0.000000] ACPI: FACP 5ff90200 00084 (v01 091608 FACP1442 20080916
MSFT 00000097)
[ 0.000000] ACPI: DSDT 5ff90450 0AA8D (v01 A1043 A1043000 00000000
INTL 20051117)
[ 0.000000] ACPI: FACS 5ff9e000 00040
[ 0.000000] ACPI: APIC 5ff90390 00080 (v01 091608 APIC1442 20080916
MSFT 00000097)
[ 0.000000] ACPI: MCFG 5ff90410 0003C (v01 091608 OEMMCFG 20080916
MSFT 00000097)
[ 0.000000] ACPI: OEMB 5ff9e040 00072 (v01 091608 OEMB1442 20080916
MSFT 00000097)
[ 0.000000] ACPI: HPET 5ff9aee0 00038 (v01 091608 OEMHPET0 20080916
MSFT 00000097)
[ 0.000000] ACPI: INFO 5ff9e0c0 00124 (v01 091608 AMDINFO 20080916
MSFT 00000097)
[ 0.000000] ACPI: NVHD 5ff9e1f0 00284 (v01 091608 NVHDCP 20080916
MSFT 00000097)
[ 0.000000] ACPI: SSDT 5ff9af20 002CC (v01 A_M_I_ POWERNOW 00000001
AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 647MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0005ff90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0005ff90
[ 0.000000] On node 0 totalpages: 392990
[ 0.000000] free_area_init_node: node 0, pgdat c1784100, node_mem_map
f5b7e200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1296 pages used for memmap
[ 0.000000] HighMem zone: 164482 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high
edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high
edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e3000
[ 0.000000] PM: Registered nosave memory: 00000000000e3000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 60000000 (gap:
60000000:9ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f5400000 s28800 r0 d24448
u1048576
[ 0.000000] pcpu-alloc: s28800 r0 d24448 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 389918
[ 0.000000] Kernel command line:
root=UUID=e700594e-8b3f-4307-98e9-f9225c89a6a7 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 7861760 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0005ff90)
[ 0.000000] Memory: 1529068k/1572416k available (5188k kernel code,
42892k reserved, 2540k data, 700k init, 663112k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB)
[ 0.000000] .data : 0xc15112a1 - 0xc178c480 (2540 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15112a1 (5188 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f4808000 soft=f480a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2800.145 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.004005] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5600.29 BogoMIPS (lpj=11200580)
[ 0.004010] pid_max: default: 32768 minimum: 301
[ 0.004036] Security Framework initialized
[ 0.004055] AppArmor: AppArmor initialized
[ 0.004057] Yama: becoming mindful.
[ 0.004116] Mount-cache hash table entries: 512
[ 0.004248] Initializing cgroup subsys ns
[ 0.004252] ns_cgroup deprecated: consider using the 'clone_children'
flag without the ns_cgroup.
[ 0.004255] Initializing cgroup subsys cpuacct
[ 0.004260] Initializing cgroup subsys memory
[ 0.004269] Initializing cgroup subsys devices
[ 0.004271] Initializing cgroup subsys freezer
[ 0.004274] Initializing cgroup subsys net_cls
[ 0.004276] Initializing cgroup subsys blkio
[ 0.004307] CPU: Physical Processor ID: 0
[ 0.004310] CPU: Processor Core ID: 0
[ 0.004312] mce: CPU supports 5 MCE banks
[ 0.004323] using C1E aware idle routine
[ 0.008062] ACPI: Core revision 20110112
[ 0.014943] ftrace: allocating 23640 entries in 47 pages
[ 0.016073] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016544] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057038] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5400+
stepping 02
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] CPU 1 irqstacks, hard=f48d0000 soft=f48d2000
[ 0.060003] Booting Node 0, Processors #1
[ 0.008000] Initializing CPU#1
[ 0.144080] Brought up 2 CPUs
[ 0.144083] Total of 2 processors activated (11200.26 BogoMIPS).
[ 0.144313] devtmpfs: initialized
[ 0.145064] print_constraints: dummy:
[ 0.145123] Time: 20:26:39 Date: 05/14/11
[ 0.145161] NET: Registered protocol family 16
[ 0.145192] Trying to unpack rootfs image as initramfs...
[ 0.145279] EISA bus registered
[ 0.145283] node 0 link 0: io port [1000, ffffff]
[ 0.145286] node 0 link 0: io port [1000, 1fff]
[ 0.145288] TOM: 0000000080000000 aka 2048M
[ 0.145291] node 0 link 0: mmio [e0000000, efffffff]
[ 0.145294] node 0 link 0: mmio [a0000, bffff]
[ 0.145296] node 0 link 0: mmio [80000000, fe0bffff]
[ 0.145299] bus: [00, 07] on node 0 link 0
[ 0.145301] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.145303] bus: 00 index 1 [mem 0x80000000-0xffffffff]
[ 0.145305] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.145312] ACPI: bus type pci registered
[ 0.145380] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.145383] PCI: not using MMCONFIG
[ 0.146004] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.146006] PCI: Using configuration type 1 for base access
[ 0.146025] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.146027] mtrr: probably your BIOS does not setup all CPUs.
[ 0.146028] mtrr: corrected configuration.
[ 0.146882] bio: create slab <bio-0> at 0
[ 0.149254] ACPI: EC: Look up EC in DSDT
[ 0.150913] ACPI: Executed 1 blocks of module-level executable AML
code
[ 0.154576] ACPI: Interpreter enabled
[ 0.154581] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.154598] ACPI: Using IOAPIC for interrupt routing
[ 0.154615] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.155778] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in
ACPI motherboard resources
[ 0.155780] PCI: Using MMCONFIG for extended config space
[ 0.163844] ACPI: No dock devices found.
[ 0.163846] HEST: Table not found.
[ 0.163850] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.164037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.164196] pci_root PNP0A03:00: host bridge window [io
0x0000-0x0cf7]
[ 0.164198] pci_root PNP0A03:00: host bridge window [io
0x0d00-0xffff]
[ 0.164201] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.164203] pci_root PNP0A03:00: host bridge window [mem
0x000d0000-0x000dffff]
[ 0.164205] pci_root PNP0A03:00: host bridge window [mem
0x80000000-0xdfffffff]
[ 0.164207] pci_root PNP0A03:00: host bridge window [mem
0xf0000000-0xfebfffff]
[ 0.164245] pci 0000:00:00.0: [10de:0754] type 0 class 0x000500
[ 0.164463] pci 0000:00:01.0: [10de:075c] type 0 class 0x000601
[ 0.164470] pci 0000:00:01.0: reg 10: [io 0x0900-0x09ff]
[ 0.164506] pci 0000:00:01.1: [10de:0752] type 0 class 0x000c05
[ 0.164517] pci 0000:00:01.1: reg 10: [io 0x0e00-0x0e3f]
[ 0.164533] pci 0000:00:01.1: reg 20: [io 0x0600-0x063f]
[ 0.164539] pci 0000:00:01.1: reg 24: [io 0x0700-0x073f]
[ 0.164559] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.164565] pci 0000:00:01.1: PME# disabled
[ 0.164576] pci 0000:00:01.2: [10de:0751] type 0 class 0x000500
[ 0.164622] pci 0000:00:01.3: [10de:0753] type 0 class 0x000b40
[ 0.164639] pci 0000:00:01.3: reg 10: [mem 0xfcf80000-0xfcffffff]
[ 0.164745] pci 0000:00:01.4: [10de:0568] type 0 class 0x000500
[ 0.164812] pci 0000:00:02.0: [10de:077b] type 0 class 0x000c03
[ 0.164821] pci 0000:00:02.0: reg 10: [mem 0xfcf7e000-0xfcf7efff]
[ 0.164853] pci 0000:00:02.0: supports D1 D2
[ 0.164854] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.164857] pci 0000:00:02.0: PME# disabled
[ 0.164869] pci 0000:00:02.1: [10de:077c] type 0 class 0x000c03
[ 0.164880] pci 0000:00:02.1: reg 10: [mem 0xfcf7fc00-0xfcf7fcff]
[ 0.164915] pci 0000:00:02.1: supports D1 D2
[ 0.164917] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.164920] pci 0000:00:02.1: PME# disabled
[ 0.164938] pci 0000:00:04.0: [10de:077d] type 0 class 0x000c03
[ 0.164947] pci 0000:00:04.0: reg 10: [mem 0xfcf7d000-0xfcf7dfff]
[ 0.164978] pci 0000:00:04.0: supports D1 D2
[ 0.164980] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.164983] pci 0000:00:04.0: PME# disabled
[ 0.164995] pci 0000:00:04.1: [10de:077e] type 0 class 0x000c03
[ 0.165005] pci 0000:00:04.1: reg 10: [mem 0xfcf7f800-0xfcf7f8ff]
[ 0.165041] pci 0000:00:04.1: supports D1 D2
[ 0.165043] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.165046] pci 0000:00:04.1: PME# disabled
[ 0.165067] pci 0000:00:07.0: [10de:0774] type 0 class 0x000403
[ 0.165078] pci 0000:00:07.0: reg 10: [mem 0xfcf78000-0xfcf7bfff]
[ 0.165113] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.165116] pci 0000:00:07.0: PME# disabled
[ 0.165129] pci 0000:00:08.0: [10de:075a] type 1 class 0x000604
[ 0.165167] pci 0000:00:09.0: [10de:0ad0] type 0 class 0x000101
[ 0.165176] pci 0000:00:09.0: reg 10: [io 0xd480-0xd487]
[ 0.165180] pci 0000:00:09.0: reg 14: [io 0xd400-0xd403]
[ 0.165185] pci 0000:00:09.0: reg 18: [io 0xd080-0xd087]
[ 0.165189] pci 0000:00:09.0: reg 1c: [io 0xd000-0xd003]
[ 0.165194] pci 0000:00:09.0: reg 20: [io 0xcc00-0xcc0f]
[ 0.165198] pci 0000:00:09.0: reg 24: [mem 0xfcf76000-0xfcf77fff]
[ 0.165225] pci 0000:00:0a.0: [10de:0760] type 0 class 0x000200
[ 0.165235] pci 0000:00:0a.0: reg 10: [mem 0xfcf7c000-0xfcf7cfff]
[ 0.165240] pci 0000:00:0a.0: reg 14: [io 0xc880-0xc887]
[ 0.165245] pci 0000:00:0a.0: reg 18: [mem 0xfcf7f400-0xfcf7f4ff]
[ 0.165249] pci 0000:00:0a.0: reg 1c: [mem 0xfcf7f000-0xfcf7f00f]
[ 0.165272] pci 0000:00:0a.0: supports D1 D2
[ 0.165274] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.165278] pci 0000:00:0a.0: PME# disabled
[ 0.165291] pci 0000:00:0b.0: [10de:0569] type 1 class 0x000604
[ 0.165312] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.165314] pci 0000:00:0b.0: PME# disabled
[ 0.165367] pci 0000:00:10.0: [10de:0778] type 1 class 0x000604
[ 0.165535] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.165543] pci 0000:00:10.0: PME# disabled
[ 0.165627] pci 0000:00:12.0: [10de:075b] type 1 class 0x000604
[ 0.165794] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.165801] pci 0000:00:12.0: PME# disabled
[ 0.165883] pci 0000:00:13.0: [10de:077a] type 1 class 0x000604
[ 0.166051] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.166058] pci 0000:00:13.0: PME# disabled
[ 0.166103] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.166118] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.166132] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.166145] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.166208] pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive
decode)
[ 0.166211] pci 0000:00:08.0: bridge window [io 0xf000-0x0000]
(disabled)
[ 0.166215] pci 0000:00:08.0: bridge window [mem
0xfff00000-0x000fffff] (disabled)
[ 0.166218] pci 0000:00:08.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.166221] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.166223] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.166225] pci 0000:00:08.0: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 0.166228] pci 0000:00:08.0: bridge window [mem
0x000d0000-0x000dffff] (subtractive decode)
[ 0.166230] pci 0000:00:08.0: bridge window [mem
0x80000000-0xdfffffff] (subtractive decode)
[ 0.166232] pci 0000:00:08.0: bridge window [mem
0xf0000000-0xfebfffff] (subtractive decode)
[ 0.166254] pci 0000:02:00.0: [10de:0848] type 0 class 0x000300
[ 0.166261] pci 0000:02:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.166268] pci 0000:02:00.0: reg 14: [mem 0xf0000000-0xf7ffffff
64bit pref]
[ 0.166274] pci 0000:02:00.0: reg 1c: [mem 0xfa000000-0xfbffffff
64bit pref]
[ 0.166279] pci 0000:02:00.0: reg 24: [io 0xec00-0xec7f]
[ 0.166284] pci 0000:02:00.0: reg 30: [mem 0xfeae0000-0xfeafffff
pref]
[ 0.166308] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.166311] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
[ 0.166314] pci 0000:00:0b.0: bridge window [mem
0xfd000000-0xfeafffff]
[ 0.166317] pci 0000:00:0b.0: bridge window [mem
0xf0000000-0xfbffffff 64bit pref]
[ 0.166468] pci 0000:00:10.0: PCI bridge to [bus 03-03]
[ 0.166481] pci 0000:00:10.0: bridge window [io 0xf000-0x0000]
(disabled)
[ 0.166489] pci 0000:00:10.0: bridge window [mem
0xfff00000-0x000fffff] (disabled)
[ 0.166502] pci 0000:00:10.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.166654] pci 0000:00:12.0: PCI bridge to [bus 04-04]
[ 0.166668] pci 0000:00:12.0: bridge window [io 0xf000-0x0000]
(disabled)
[ 0.166675] pci 0000:00:12.0: bridge window [mem
0xfff00000-0x000fffff] (disabled)
[ 0.166689] pci 0000:00:12.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.166856] pci 0000:05:00.0: [197b:2380] type 0 class 0x000c00
[ 0.166874] pci 0000:05:00.0: reg 10: [mem 0xfebff800-0xfebfffff]
[ 0.166888] pci 0000:05:00.0: reg 14: [mem 0xfebff400-0xfebff47f]
[ 0.166924] pci 0000:05:00.0: reg 20: [mem 0xfebff000-0xfebff07f]
[ 0.166938] pci 0000:05:00.0: reg 24: [mem 0xfebfec00-0xfebfec7f]
[ 0.172031] pci 0000:00:13.0: PCI bridge to [bus 05-05]
[ 0.172044] pci 0000:00:13.0: bridge window [io 0xf000-0x0000]
(disabled)
[ 0.172052] pci 0000:00:13.0: bridge window [mem
0xfeb00000-0xfebfffff]
[ 0.172066] pci 0000:00:13.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.172106] pci_bus 0000:00: on NUMA node 0
[ 0.172109] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.172314] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.172361] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.172389] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT]
[ 0.172420] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.172455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[ 0.172566] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.180244] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0,
disabled.
[ 0.180327] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0,
disabled.
[ 0.180408] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,
disabled.
[ 0.180490] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0,
disabled.
[ 0.180572] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
[ 0.180653] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0,
disabled.
[ 0.180736] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0,
disabled.
[ 0.180818] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0,
disabled.
[ 0.180904] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0,
disabled.
[ 0.180985] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0,
disabled.
[ 0.181066] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0,
disabled.
[ 0.181147] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0,
disabled.
[ 0.181230] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
[ 0.181312] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0,
disabled.
[ 0.181393] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0,
disabled.
[ 0.181477] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0,
disabled.
[ 0.181562] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15
[ 0.181643] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0,
disabled.
[ 0.181725] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0,
disabled.
[ 0.181806] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0,
disabled.
[ 0.181887] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0,
disabled.
[ 0.181968] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0,
disabled.
[ 0.182050] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0,
disabled.
[ 0.182131] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0,
disabled.
[ 0.182212] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0,
disabled.
[ 0.182294] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0,
disabled.
[ 0.182375] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0,
disabled.
[ 0.182458] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0,
disabled.
[ 0.182539] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0,
disabled.
[ 0.182621] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0,
disabled.
[ 0.182702] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0,
disabled.
[ 0.182784] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0,
disabled.
[ 0.182866] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0,
disabled.
[ 0.182948] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0,
disabled.
[ 0.183030] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0,
disabled.
[ 0.183112] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0,
disabled.
[ 0.183196] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *14
[ 0.183280] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
[ 0.183364] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *14
[ 0.183448] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15
[ 0.183533] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *14
[ 0.183617] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.183702] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10
[ 0.183788] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.183879] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,
disabled.
[ 0.183963] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *11
[ 0.184061] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
[ 0.184167] vgaarb: device added: PCI:0000:02:00.0,decodes=io
+mem,owns=io+mem,locks=none
[ 0.184170] vgaarb: loaded
[ 0.184361] SCSI subsystem initialized
[ 0.184427] libata version 3.00 loaded.
[ 0.184473] usbcore: registered new interface driver usbfs
[ 0.184484] usbcore: registered new interface driver hub
[ 0.184509] usbcore: registered new device driver usb
[ 0.184733] wmi: Mapper loaded
[ 0.184734] PCI: Using ACPI for IRQ routing
[ 0.184739] PCI: pci_cache_line_size set to 64 bytes
[ 0.184822] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.184825] reserve RAM buffer: 000000005ff90000 - 000000005fffffff
[ 0.184914] NetLabel: Initializing
[ 0.184915] NetLabel: domain hash size = 128
[ 0.184916] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.184927] NetLabel: unlabeled traffic allowed by default
[ 0.184958] HPET: 3 timers in total, 0 timers will be used for
per-cpu timer
[ 0.184964] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.184968] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.188064] Switching to clocksource hpet
[ 0.191712] Switched to NOHz mode on CPU #0
[ 0.191736] Switched to NOHz mode on CPU #1
[ 0.194802] AppArmor: AppArmor Filesystem Enabled
[ 0.194834] pnp: PnP ACPI init
[ 0.194852] ACPI: bus type pnp registered
[ 0.194976] pnp 00:00: [bus 00-ff]
[ 0.194979] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.194981] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.194983] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.194985] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.194987] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.194989] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[ 0.194991] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.195073] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03
(active)
[ 0.195097] pnp 00:01: [dma 4]
[ 0.195099] pnp 00:01: [io 0x0000-0x000f]
[ 0.195101] pnp 00:01: [io 0x0081-0x0083]
[ 0.195103] pnp 00:01: [io 0x0087]
[ 0.195104] pnp 00:01: [io 0x0089-0x008b]
[ 0.195106] pnp 00:01: [io 0x008f]
[ 0.195108] pnp 00:01: [io 0x00c0-0x00df]
[ 0.195131] pnp 00:01: Plug and Play ACPI device, IDs PNP0200
(active)
[ 0.195138] pnp 00:02: [io 0x0061]
[ 0.195160] pnp 00:02: Plug and Play ACPI device, IDs PNP0800
(active)
[ 0.195167] pnp 00:03: [io 0x00f0-0x00ff]
[ 0.195182] pnp 00:03: [irq 13]
[ 0.195203] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04
(active)
[ 0.195698] pnp 00:04: [io 0x03f0-0x03f5]
[ 0.195700] pnp 00:04: [io 0x03f7]
[ 0.195708] pnp 00:04: [irq 6]
[ 0.195710] pnp 00:04: [dma 2]
[ 0.195756] pnp 00:04: Plug and Play ACPI device, IDs PNP0700
(active)
[ 0.196394] pnp 00:05: [io 0x0378-0x037f]
[ 0.196402] pnp 00:05: [irq 7]
[ 0.196404] pnp 00:05: [dma 0 disabled]
[ 0.196621] pnp 00:05: Plug and Play ACPI device, IDs PNP0400
(active)
[ 0.196893] pnp 00:06: [mem 0x000d0000-0x000d3fff window]
[ 0.196895] pnp 00:06: [mem 0x000d4000-0x000d7fff window]
[ 0.196898] pnp 00:06: [mem 0x000de000-0x000dffff window]
[ 0.196900] pnp 00:06: [io 0x0010-0x001f]
[ 0.196901] pnp 00:06: [io 0x0022-0x003f]
[ 0.196903] pnp 00:06: [io 0x0044-0x004d]
[ 0.196905] pnp 00:06: [io 0x0050-0x005f]
[ 0.196907] pnp 00:06: [io 0x0062-0x0063]
[ 0.196908] pnp 00:06: [io 0x0065-0x006f]
[ 0.196913] pnp 00:06: [io 0x0072-0x007f]
[ 0.196915] pnp 00:06: [io 0x0080]
[ 0.196916] pnp 00:06: [io 0x0084-0x0086]
[ 0.196918] pnp 00:06: [io 0x0088]
[ 0.196920] pnp 00:06: [io 0x008c-0x008e]
[ 0.196921] pnp 00:06: [io 0x0090-0x009f]
[ 0.196923] pnp 00:06: [io 0x00a2-0x00bf]
[ 0.196925] pnp 00:06: [io 0x00e0-0x00ef]
[ 0.196927] pnp 00:06: [io 0x04d0-0x04d1]
[ 0.196928] pnp 00:06: [io 0x0800-0x080f]
[ 0.196930] pnp 00:06: [io 0x0500-0x057f]
[ 0.196932] pnp 00:06: [io 0x0580-0x05ff]
[ 0.196934] pnp 00:06: [io 0x0800-0x087f]
[ 0.196935] pnp 00:06: [io 0x0880-0x08ff]
[ 0.196937] pnp 00:06: [io 0x0d00-0x0d7f]
[ 0.196939] pnp 00:06: [io 0x0d80-0x0dff]
[ 0.196941] pnp 00:06: [io 0x0900-0x097f]
[ 0.196942] pnp 00:06: [io 0x0980-0x09ff]
[ 0.196944] pnp 00:06: [mem 0x00000000-0xffffffff disabled]
[ 0.196946] pnp 00:06: [mem 0x00000000-0xffffffff disabled]
[ 0.196948] pnp 00:06: [mem 0xfed04000-0xfed04fff]
[ 0.196950] pnp 00:06: [mem 0xfee01000-0xfeefffff]
[ 0.196958] pnp 00:06: disabling [io 0x0900-0x097f] because it
overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 0.196961] pnp 00:06: disabling [io 0x0980-0x09ff] because it
overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 0.197036] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.197038] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.197041] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.197043] system 00:06: [io 0x0580-0x05ff] has been reserved
[ 0.197045] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.197048] system 00:06: [io 0x0880-0x08ff] has been reserved
[ 0.197050] system 00:06: [io 0x0d00-0x0d7f] has been reserved
[ 0.197053] system 00:06: [io 0x0d80-0x0dff] has been reserved
[ 0.197056] system 00:06: [mem 0x000d0000-0x000d3fff window] has been
reserved
[ 0.197058] system 00:06: [mem 0x000d4000-0x000d7fff window] has been
reserved
[ 0.197061] system 00:06: [mem 0x000de000-0x000dffff window] has been
reserved
[ 0.197064] system 00:06: [mem 0xfed04000-0xfed04fff] has been
reserved
[ 0.197066] system 00:06: [mem 0xfee01000-0xfeefffff] has been
reserved
[ 0.197069] system 00:06: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.197156] pnp 00:07: [mem 0xfed00000-0xfed00fff]
[ 0.197158] pnp 00:07: [irq 2 disabled]
[ 0.197166] pnp 00:07: [irq 8]
[ 0.197189] pnp 00:07: Plug and Play ACPI device, IDs PNP0103
(active)
[ 0.197208] pnp 00:08: [io 0x0070-0x0071]
[ 0.197234] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00
(active)
[ 0.197312] pnp 00:09: [io 0x0060]
[ 0.197314] pnp 00:09: [io 0x0064]
[ 0.197316] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.197318] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.197359] system 00:09: [mem 0xfec00000-0xfec00fff] could not be
reserved
[ 0.197361] system 00:09: [mem 0xfee00000-0xfee00fff] has been
reserved
[ 0.197364] system 00:09: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.197515] pnp 00:0a: [io 0x0000-0xffffffff disabled]
[ 0.197517] pnp 00:0a: [io 0x0230-0x023f]
[ 0.197519] pnp 00:0a: [io 0x0290-0x029f]
[ 0.197521] pnp 00:0a: [io 0x0a00-0x0a0f]
[ 0.197522] pnp 00:0a: [io 0x0a10-0x0a1f]
[ 0.197562] system 00:0a: [io 0x0230-0x023f] has been reserved
[ 0.197565] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 0.197567] system 00:0a: [io 0x0a00-0x0a0f] has been reserved
[ 0.197569] system 00:0a: [io 0x0a10-0x0a1f] has been reserved
[ 0.197572] system 00:0a: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.198022] pnp 00:0b: [io 0x03f8-0x03ff]
[ 0.198030] pnp 00:0b: [irq 4]
[ 0.198031] pnp 00:0b: [dma 0 disabled]
[ 0.198082] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501
(active)
[ 0.198119] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 0.198158] system 00:0c: [mem 0xe0000000-0xefffffff] has been
reserved
[ 0.198161] system 00:0c: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.198297] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.198299] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 0.198301] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 0.198303] pnp 00:0d: [mem 0x00100000-0x7fffffff]
[ 0.198305] pnp 00:0d: [mem 0xfec00000-0xffffffff]
[ 0.198358] system 00:0d: [mem 0x00000000-0x0009ffff] could not be
reserved
[ 0.198361] system 00:0d: [mem 0x000c0000-0x000cffff] could not be
reserved
[ 0.198363] system 00:0d: [mem 0x000e0000-0x000fffff] could not be
reserved
[ 0.198366] system 00:0d: [mem 0x00100000-0x7fffffff] could not be
reserved
[ 0.198368] system 00:0d: [mem 0xfec00000-0xffffffff] could not be
reserved
[ 0.198371] system 00:0d: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 0.198929] pnp: PnP ACPI: found 14 devices
[ 0.198931] ACPI: ACPI bus type pnp unregistered
[ 0.198934] PnPBIOS: Disabled by ACPI PNP
[ 0.235063] pci 0000:00:08.0: PCI bridge to [bus 01-01]
[ 0.235065] pci 0000:00:08.0: bridge window [io disabled]
[ 0.235069] pci 0000:00:08.0: bridge window [mem disabled]
[ 0.235071] pci 0000:00:08.0: bridge window [mem pref disabled]
[ 0.235075] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.235078] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
[ 0.235081] pci 0000:00:0b.0: bridge window [mem
0xfd000000-0xfeafffff]
[ 0.235084] pci 0000:00:0b.0: bridge window [mem
0xf0000000-0xfbffffff 64bit pref]
[ 0.235088] pci 0000:00:10.0: PCI bridge to [bus 03-03]
[ 0.235089] pci 0000:00:10.0: bridge window [io disabled]
[ 0.235099] pci 0000:00:10.0: bridge window [mem disabled]
[ 0.235105] pci 0000:00:10.0: bridge window [mem pref disabled]
[ 0.235118] pci 0000:00:12.0: PCI bridge to [bus 04-04]
[ 0.235119] pci 0000:00:12.0: bridge window [io disabled]
[ 0.235129] pci 0000:00:12.0: bridge window [mem disabled]
[ 0.235135] pci 0000:00:12.0: bridge window [mem pref disabled]
[ 0.235148] pci 0000:00:13.0: PCI bridge to [bus 05-05]
[ 0.235149] pci 0000:00:13.0: bridge window [io disabled]
[ 0.235159] pci 0000:00:13.0: bridge window [mem
0xfeb00000-0xfebfffff]
[ 0.235166] pci 0000:00:13.0: bridge window [mem pref disabled]
[ 0.235183] pci 0000:00:08.0: setting latency timer to 64
[ 0.235187] pci 0000:00:0b.0: setting latency timer to 64
[ 0.235336] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
[ 0.235349] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19
(level, low) -> IRQ 19
[ 0.235357] pci 0000:00:10.0: setting latency timer to 64
[ 0.235492] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
[ 0.235500] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18
(level, low) -> IRQ 18
[ 0.235508] pci 0000:00:12.0: setting latency timer to 64
[ 0.235643] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17
[ 0.235653] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 17
(level, low) -> IRQ 17
[ 0.235661] pci 0000:00:13.0: setting latency timer to 64
[ 0.235666] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.235668] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.235670] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.235672] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.235674] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
[ 0.235677] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.235679] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.235681] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.235683] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.235685] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.235687] pci_bus 0000:01: resource 8 [mem 0x80000000-0xdfffffff]
[ 0.235690] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.235692] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.235694] pci_bus 0000:02: resource 1 [mem 0xfd000000-0xfeafffff]
[ 0.235696] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xfbffffff
64bit pref]
[ 0.235699] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.235734] NET: Registered protocol family 2
[ 0.235793] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.236058] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.236595] TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.236843] TCP: Hash tables configured (established 131072 bind
65536)
[ 0.236845] TCP reno registered
[ 0.236848] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.236859] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.236950] NET: Registered protocol family 1
[ 0.237156] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 0.237252] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.237353] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.237460] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.237566] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 0.237745] pci 0000:02:00.0: Boot video device
[ 0.237750] PCI: CLS 64 bytes, default 64
[ 0.237959] cpufreq-nforce2: No nForce2 chipset.
[ 0.238080] audit: initializing netlink socket (disabled)
[ 0.238090] type=2000 audit(1305404799.232:1): initialized
[ 0.246331] highmem bounce pool size: 64 pages
[ 0.246335] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.247739] VFS: Disk quotas dquot_6.5.2
[ 0.247786] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.248355] fuse init (API version 7.16)
[ 0.248432] msgmni has been set to 1691
[ 0.248644] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.248667] io scheduler noop registered
[ 0.248668] io scheduler deadline registered
[ 0.248682] io scheduler cfq registered (default)
[ 0.249142] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.249166] pciehp: PCI Express Hot Plug Controller Driver version:
0.4
[ 0.249321] input: Power Button
as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.249326] ACPI: Power Button [PWRB]
[ 0.249377] input: Power Button
as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.249380] ACPI: Power Button [PWRF]
[ 0.249542] ACPI: acpi_idle registered with cpuidle
[ 0.252484] ERST: Table is not found!
[ 0.252566] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.272924] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.273013] isapnp: Scanning for PnP cards...
[ 0.393880] Freeing initrd memory: 12516k freed
[ 0.626625] isapnp: No Plug & Play device found
[ 0.784472] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.784784] Linux agpgart interface v0.103
[ 0.786042] brd: module loaded
[ 0.786556] loop: module loaded
[ 0.786656] i2c-core: driver [adp5520] using legacy suspend method
[ 0.786657] i2c-core: driver [adp5520] using legacy resume method
[ 0.786987] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 0.787004] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23
(level, low) -> IRQ 23
[ 0.787035] pata_acpi 0000:00:09.0: setting latency timer to 64
[ 0.787047] pata_acpi 0000:00:09.0: PCI INT A disabled
[ 0.787382] Fixed MDIO Bus: probed
[ 0.787419] PPP generic driver version 2.4.2
[ 0.787461] tun: Universal TUN/TAP device driver, 1.6
[ 0.787462] tun: (C) 1999-2004 Max Krasnyansky <maxk@...>
[ 0.787544] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 0.787732] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.787742] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22
(level, low) -> IRQ 22
[ 0.787755] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.787758] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.787793] ehci_hcd 0000:00:02.1: new USB bus registered, assigned
bus number 1
[ 0.788066] ehci_hcd 0000:00:02.1: debug port 1
[ 0.788075] ehci_hcd 0000:00:02.1: cache line size of 64 is not
supported
[ 0.788100] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfcf7fc00
[ 0.800016] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.800149] hub 1-0:1.0: USB hub found
[ 0.800153] hub 1-0:1.0: 6 ports detected
[ 0.800428] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
[ 0.800445] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21
(level, low) -> IRQ 21
[ 0.800462] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.800465] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.800502] ehci_hcd 0000:00:04.1: new USB bus registered, assigned
bus number 2
[ 0.800552] ehci_hcd 0000:00:04.1: debug port 1
[ 0.800559] ehci_hcd 0000:00:04.1: cache line size of 64 is not
supported
[ 0.800580] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfcf7f800
[ 0.812014] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.812124] hub 2-0:1.0: USB hub found
[ 0.812128] hub 2-0:1.0: 6 ports detected
[ 0.812207] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.812393] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[ 0.812404] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20
(level, low) -> IRQ 20
[ 0.812412] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.812415] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.812455] ohci_hcd 0000:00:02.0: new USB bus registered, assigned
bus number 3
[ 0.812498] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfcf7e000
[ 0.870090] hub 3-0:1.0: USB hub found
[ 0.870095] hub 3-0:1.0: 6 ports detected
[ 0.870308] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
[ 0.870312] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23
(level, low) -> IRQ 23
[ 0.870320] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.870323] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.870365] ohci_hcd 0000:00:04.0: new USB bus registered, assigned
bus number 4
[ 0.870413] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfcf7d000
[ 0.926094] hub 4-0:1.0: USB hub found
[ 0.926099] hub 4-0:1.0: 6 ports detected
[ 0.926169] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.926252] i8042: PNP: No PS/2 controller found. Probing ports
directly.
[ 0.926684] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.926689] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.926804] mousedev: PS/2 mouse device common for all mice
[ 0.926937] rtc_cmos 00:08: RTC can wake from S4
[ 0.932058] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.932111] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet
irqs
[ 0.932192] device-mapper: uevent: version 1.0.3
[ 0.932263] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07)
initialised: dm-devel@...
[ 0.932360] device-mapper: multipath: version 1.2.0 loaded
[ 0.932362] device-mapper: multipath round-robin: version 1.0.0
loaded
[ 0.932436] EISA: Probing bus 0 at eisa.0
[ 0.932438] EISA: Cannot allocate resource for mainboard
[ 0.932440] Cannot allocate resource for EISA slot 1
[ 0.932442] Cannot allocate resource for EISA slot 2
[ 0.932444] Cannot allocate resource for EISA slot 3
[ 0.932446] Cannot allocate resource for EISA slot 4
[ 0.932448] Cannot allocate resource for EISA slot 5
[ 0.932449] Cannot allocate resource for EISA slot 6
[ 0.932451] Cannot allocate resource for EISA slot 7
[ 0.932453] Cannot allocate resource for EISA slot 8
[ 0.932455] EISA: Detected 0 cards.
[ 0.932524] cpuidle: using governor ladder
[ 0.932526] cpuidle: using governor menu
[ 0.932763] TCP cubic registered
[ 0.932872] NET: Registered protocol family 10
[ 0.933343] NET: Registered protocol family 17
[ 0.933360] Registering the dns_resolver key type
[ 0.933381] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core
Processor 5400+ (2 cpu cores) (version 2.20.00)
[ 0.933424] powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0x8
[ 0.933426] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa
[ 0.933428] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc
[ 0.933430] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe
[ 0.933431] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10
[ 0.933433] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10
[ 0.933435] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12
[ 0.933474] powernow-k8: ph2 null fid transition 0x14
[ 0.933497] Using IPI No-Shortcut mode
[ 0.933586] PM: Hibernation image not present or could not be loaded.
[ 0.933597] registered taskstats version 1
[ 0.933932] Magic number: 11:541:447
[ 0.934061] rtc_cmos 00:08: setting system clock to 2011-05-14
20:26:40 UTC (1305404800)
[ 0.934064] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.934065] EDD information not available.
[ 0.934154] Freeing unused kernel memory: 700k freed
[ 0.934487] Write protecting the kernel text: 5192k
[ 0.934525] Write protecting the kernel read-only data: 2148k
[ 0.954954] <30>udev[64]: starting version 167
[ 1.026589] firewire_ohci 0000:05:00.0: PCI INT A -> Link[LN3A] ->
GSI 17 (level, low) -> IRQ 17
[ 1.026597] firewire_ohci 0000:05:00.0: setting latency timer to 64
[ 1.054228] forcedeth: Reverse Engineered nForce ethernet driver.
Version 0.64.
[ 1.054431] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 1.054436] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22
(level, low) -> IRQ 22
[ 1.054441] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.100101] firewire_ohci: Added fw-ohci device 0000:05:00.0, OHCI
v1.10, 4 IR + 4 IT contexts, quirks 0x10
[ 1.100393] firewire_ohci: isochronous cycle inconsistent
[ 1.107855] FDC 0 is a post-1991 82077
[ 1.112024] usb 1-2: new high speed USB device using ehci_hcd and
address 2
[ 1.117195] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3,
addr 00:23:54:4f:d1:f8
[ 1.117198] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit
lnktim msi desc-v3
[ 1.117229] ahci 0000:00:09.0: version 3.0
[ 1.117243] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23
(level, low) -> IRQ 23
[ 1.117292] ahci 0000:00:09.0: irq 40 for MSI/MSI-X
[ 1.117297] ahci 0000:00:09.0: controller can't do PMP, turning off
CAP_PMP
[ 1.117373] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps
0x3f impl IDE mode
[ 1.117376] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh
[ 1.117380] ahci 0000:00:09.0: setting latency timer to 64
[ 1.118587] scsi0 : ahci
[ 1.118711] scsi1 : ahci
[ 1.118779] scsi2 : ahci
[ 1.118855] scsi3 : ahci
[ 1.118927] scsi4 : ahci
[ 1.119001] scsi5 : ahci
[ 1.119131] ata1: SATA max UDMA/133 abar m8192@... port
0xfcf76100 irq 40
[ 1.119133] ata2: SATA max UDMA/133 abar m8192@... port
0xfcf76180 irq 40
[ 1.119136] ata3: SATA max UDMA/133 abar m8192@... port
0xfcf76200 irq 40
[ 1.119138] ata4: SATA max UDMA/133 abar m8192@... port
0xfcf76280 irq 40
[ 1.119140] ata5: SATA max UDMA/133 abar m8192@... port
0xfcf76300 irq 40
[ 1.119143] ata6: SATA max UDMA/133 abar m8192@... port
0xfcf76380 irq 40
[ 1.436024] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.436042] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.436059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.436072] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.436082] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.436094] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.444099] ata2.00: ATAPI: HL-DT-ST BD-RE WH10LS30, 1.00, max
UDMA/133
[ 1.448087] ata2.00: configured for UDMA/133
[ 1.464715] ata1.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 1.464718] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth
31/32)
[ 1.506575] ata1.00: configured for UDMA/133
[ 1.506712] scsi 0:0:0:0: Direct-Access ATA ST31500341AS
CC1H PQ: 0 ANSI: 5
[ 1.506893] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.506897] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks:
(1.50 TB/1.36 TiB)
[ 1.506936] sd 0:0:0:0: [sda] Write Protect is off
[ 1.506939] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.506956] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.515593] scsi 1:0:0:0: CD-ROM HL-DT-ST BD-RE WH10LS30
1.00 PQ: 0 ANSI: 5
[ 1.524618] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 1.524621] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.524721] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.524789] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.532182] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 1.532467] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.600115] firewire_core: created device fw0: GUID 001e8c0001988b89,
S400
[ 1.744020] usb 3-4: new full speed USB device using ohci_hcd and
address 2
[ 1.789404] firewire_core: created device fw1: GUID 00509400001c02b4,
S400
[ 1.882245] EXT3-fs: barriers not enabled
[ 1.892046] kjournald starting. Commit interval 5 seconds
[ 1.892079] EXT3-fs (sda2): mounted filesystem with ordered data mode
[ 2.272014] usb 3-5: new low speed USB device using ohci_hcd and
address 3
[ 27.787424] <30>udev[331]: starting version 167
[ 27.810584] Adding 1052252k swap on /dev/sda3. Priority:-1 extents:1
across:1052252k
[ 27.827468] lp: driver loaded but no devices found
[ 27.843016] it87: Found IT8712F chip at 0x290, revision 8
[ 27.843028] it87: VID is disabled (pins used for GPIO)
[ 27.843076] ACPI: resource it87 [io 0x0295-0x0296] conflicts with
ACPI region ECRE [io 0x290-0x2af]
[ 27.843079] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 27.854488] i2c i2c-0: nForce2 SMBus adapter at 0x600
[ 27.854495] ACPI: resource nForce2_smbus [io 0x0700-0x073f]
conflicts with ACPI region SM00 [io 0x700-0x73f]
[ 27.854497] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 27.866658] k8temp 0000:00:18.3: Temperature readouts might be wrong
- check erratum #141
[ 28.026069] Bluetooth: Core ver 2.15
[ 28.027941] NET: Registered protocol family 31
[ 28.027944] Bluetooth: HCI device and connection manager initialized
[ 28.027947] Bluetooth: HCI socket layer initialized
[ 28.030811] type=1400 audit(1305404827.593:2): apparmor="STATUS"
operation="profile_load" name="/sbin/dhclient" pid=526
comm="apparmor_parser"
[ 28.031117] type=1400 audit(1305404827.593:3): apparmor="STATUS"
operation="profile_load"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=526
comm="apparmor_parser"
[ 28.031315] type=1400 audit(1305404827.593:4): apparmor="STATUS"
operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script"
pid=526 comm="apparmor_parser"
[ 28.044225] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 28.060771] usbcore: registered new interface driver btusb
[ 28.085586] parport_pc 00:05: reported by Plug and Play ACPI
[ 28.085634] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 28.086945] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[ 28.088291] input: Video Bus
as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input2
[ 28.088422] ACPI: Video Device [IGPU] (multi-head: yes rom: no
post: no)
[ 28.115764] EXT3-fs (sda2): using internal journal
[ 28.188345] lp0: using parport0 (interrupt-driven).
[ 28.190324] shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
[ 28.205090] IR NEC protocol handler initialized
[ 28.208246] type=1400 audit(1305404827.773:5): apparmor="STATUS"
operation="profile_replace" name="/sbin/dhclient" pid=607
comm="apparmor_parser"
[ 28.208748] type=1400 audit(1305404827.773:6): apparmor="STATUS"
operation="profile_replace"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=607
comm="apparmor_parser"
[ 28.208949] type=1400 audit(1305404827.773:7): apparmor="STATUS"
operation="profile_replace"
name="/usr/lib/connman/scripts/dhclient-script" pid=607
comm="apparmor_parser"
[ 28.226998] IR RC5(x) protocol handler initialized
[ 28.238019] IR RC6 protocol handler initialized
[ 28.251161] IR JVC protocol handler initialized
[ 28.264112] IR Sony protocol handler initialized
[ 28.274430] lirc_dev: IR Remote Control driver registered, major 250
[ 28.277084] IR LIRC bridge handler initialized
[ 28.291548] type=1400 audit(1305404827.853:8): apparmor="STATUS"
operation="profile_load" name="/usr/sbin/ntpd" pid=538
comm="apparmor_parser"
[ 28.308423] input: iMON Panel, Knob and Mouse(15c2:ffdc)
as /devices/pci0000:00/0000:00:02.0/usb3/3-5/3-5:1.0/input/input3
[ 28.318970] Linux video capture interface: v2.00
[ 28.324309] EXT3-fs: barriers not enabled
[ 28.331319] kjournald starting. Commit interval 5 seconds
[ 28.331750] EXT3-fs (sda1): using internal journal
[ 28.331756] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 28.444076] imon 3-5:1.0: 0xffdc iMON LCD, MCE IR (id 0x9f)
[ 28.468726] type=1400 audit(1305404828.033:9): apparmor="STATUS"
operation="profile_replace" name="/usr/sbin/ntpd" pid=612
comm="apparmor_parser"
[ 28.472557] ppdev: user-space parallel port driver
[ 28.497116] hdpvr 1-2:1.0: firmware version 0x12 dated May 7 2009
23:27:43
[ 28.512165] Registered IR keymap rc-imon-mce
[ 28.512424] input: iMON Remote (15c2:ffdc)
as /devices/pci0000:00/0000:00:02.0/usb3/3-5/3-5:1.0/rc/rc0/input4
[ 28.512566] rc0: iMON Remote (15c2:ffdc)
as /devices/pci0000:00/0000:00:02.0/usb3/3-5/3-5:1.0/rc/rc0
[ 28.514103] nvidia: module license 'NVIDIA' taints kernel.
[ 28.514108] Disabling lock debugging due to kernel taint
[ 28.524199] imon 3-5:1.0: iMON device (15c2:ffdc, intf0) on usb<3:3>
initialized
[ 28.524240] usbcore: registered new interface driver imon
[ 28.611470] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[ 28.611476] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[ 28.611645] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 28.611650] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21
(level, low) -> IRQ 21
[ 28.611653] hda_intel: Disable MSI for Nvidia chipset
[ 28.611677] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 28.691207] hdpvr 1-2:1.0: device now attached to video0
[ 28.691280] usbcore: registered new interface driver hdpvr
[ 29.538632] JFS: nTxBlock = 8192, nTxLock = 65536
[ 29.721785] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
[ 29.721792] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 20
(level, low) -> IRQ 20
[ 29.721800] nvidia 0000:02:00.0: setting latency timer to 64
[ 29.721805] vgaarb: device changed decodes:
PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 29.722045] NVRM: loading NVIDIA UNIX x86 Kernel Module 270.41.06
Mon Apr 18 14:54:25 PDT 2011
[ 31.718752] type=1400 audit(1305404831.281:10): apparmor="STATUS"
operation="profile_load" name="/usr/share/gdm/guest-session/Xsession"
pid=881 comm="apparmor_parser"
[ 31.719385] type=1400 audit(1305404831.281:11): apparmor="STATUS"
operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=894
comm="apparmor_parser"
[ 31.864407] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 32.695952] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 32.695955] apm: disabled - APM is not SMP safe.
[ 42.824026] eth0: no IPv6 routers present
[ 68.268570] input: Mouseemu virtual keyboard
as /devices/virtual/input/input5
[ 68.268788] input: Mouseemu virtual mouse
as /devices/virtual/input/input6
[ 68.524089] Bluetooth: L2CAP ver 2.15
[ 68.524094] Bluetooth: L2CAP socket layer initialized
[ 68.536532] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 68.536538] Bluetooth: BNEP filters: protocol multicast
[ 68.545298] Bluetooth: SCO (Voice Link) ver 0.6
[ 68.545303] Bluetooth: SCO socket layer initialized
[ 68.617234] Bluetooth: RFCOMM TTY layer initialized
[ 68.617242] Bluetooth: RFCOMM socket layer initialized
[ 68.617245] Bluetooth: RFCOMM ver 1.11
[ 68.682543] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 429.416546] input: Logitech MX5500 Keyboard
as /devices/pci0000:00/0000:00:02.0/usb3/3-4/3-4:1.0/bluetooth/hci0/hci0:11/input7
[ 429.416800] generic-bluetooth 0005:046D:B30B.0001: input,hidraw0:
BLUETOOTH HID v1.00 Keyboard [Logitech MX5500 Keyboard] on
00:1A:7D:0A:C3:15
[19914.321620] input: Logitech MX Revolution Mouse
as /devices/pci0000:00/0000:00:02.0/usb3/3-4/3-4:1.0/bluetooth/hci0/hci0:11/input8
[19914.321790] generic-bluetooth 0005:046D:B007.0002: input,hidraw0:
BLUETOOTH HID v0.19 Mouse [Logitech MX Revolution Mouse] on
00:1A:7D:0A:C3:15
[20472.308479] input: Logitech MX5500 Keyboard
as /devices/pci0000:00/0000:00:02.0/usb3/3-4/3-4:1.0/bluetooth/hci0/hci0:12/input9
[20472.308591] generic-bluetooth 0005:046D:B30B.0003: input,hidraw1:
BLUETOOTH HID v1.00 Keyboard [Logitech MX5500 Keyboard] on
00:1A:7D:0A:C3:15
[20491.886149] forcedeth 0000:00:0a.0: eth0: link down
[20507.775944] forcedeth 0000:00:0a.0: eth0: link up
[20747.588954] show_signal_msg: 45 callbacks suppressed
[20747.588966] mythcommflag[3265]: segfault at a7bb3f44 ip 08070f35 sp
bfa73360 error 4 in mythcommflag[8048000+84000]
[20963.060492] mythpreviewgen[3801]: segfault at b3d8f190 ip 059810d8 sp
b2d2dd08 error 6 in libmythavcodec.so.52.86.1[5700000+3b0000]
[20963.515724] mythpreviewgen[3804]: segfault at b2999190 ip 07223c74 sp
b1937cfc error 6 in libmythavcodec.so.52.86.1[6fbf000+3b0000]
[20966.538239] mythpreviewgen[3851]: segfault at b4442190 ip 0107ac74 sp
b2bdfcfc error 6 in libmythavcodec.so.52.86.1[e16000+3b0000]
[20969.287061] mythpreviewgen[3932]: segfault at b28fd190 ip 0103fc74 sp
b189bcfc error 6 in libmythavcodec.so.52.86.1[ddb000+3b0000]
On Sat, 2011-05-14 at 14:25 -0400, Jarod Wilson wrote:
> On May 14, 2011, at 1:13 AM, greg wrote:
>
> > here is the output:
> >
> > ir-keytable -t
> > Testing events. Please, press CTRL-C to abort.
> > ^[[D^[[C^[[A^[[B
> > ^[[3~
> >
> > those first events are from the left/right/up/down keys. number keys give no output. some key gave a carriage return and the "clear" button on the remote gave another code
>
> Something is rather funky here. you're getting input layer events, but they
> are coming in on something other than rc0. Can you paste full dmesg output
> after a fresh boot?
>
>
> > also, the remote volume up/down does cause the pulseaudio volume to change but there is no output fro ir-keytable
>
> Seems to me there must be two receiver drivers loading.
>
>
> > one more thought, since this box has some history with previous versions of ubuntu and lirc i wonder if there could be some unusual config file left over and causing trouble?
>
> Don't think so, since ir-keytable -t isn't showing events. I'm reasonably sure
> there must be another device driver loading. What was the full output of just
> a plain 'ir-keytable'?
>
>
> >> -------Original Message-------
> >> From: Jarod Wilson <jarod@...>
> >> To: greg <greg@...>
> >> Cc: lirc-list@...
> >> Subject: Re: imon ffdc rc6 only recognizing some buttons
> >> Sent: 13 May '11 9:15pm
> >>
> >> On May 14, 2011, at 12:07 AM, greg wrote:
> >>
> >>> ir-keytable -t gives the same control codes as irw
> >>
> >> I meant quite literally, what output do you get. :) Can you paste
> >> the output from pressing up/down/left/right and a few number keys
> >> on your remote here?
> >>
> >>
> >>> you mentioned some udev scripts that might need to be cleaned up. i've browsed around and didnt see anything obvious. any hints on what to look for?
> >>
> >> Don't think that's the problem, since ir-keytable -r output looks to
> >> be correct.
> >>
> >>
> >>>> -------Original Message-------
> >>>> From: Jarod Wilson <jarod@...>
> >>>> To: greg <greg@...>
> >>>> Cc: lirc-list@...
> >>>> Subject: Re: imon ffdc rc6 only recognizing some buttons
> >>>> Sent: 13 May '11 7:46pm
> >>>>
> >>>> On May 13, 2011, at 10:22 PM, greg wrote:
> >>>>
> >>>>> i found a file under /etc/modprobe.d that was setting display type to vfd and removed it.
> >>>>>
> >>>>> here is output of: ir-keytable -r
> >>>> ...
> >>>>> scancode 0x800ff45b = KEY_RED (0x18e)
> >>>>> scancode 0x800ff45c = KEY_GREEN (0x18f)
> >>>>> scancode 0x800ff45d = KEY_YELLOW (0x190)
> >>>>> scancode 0x800ff45e = KEY_BLUE (0x191)
> >>>>> scancode 0x800ff466 = KEY_RED (0x18e)
> >>>>> scancode 0x800ff468 = KEY_YELLOW (0x190)
> >>>>> Enabled protocols: RC-6
> >>>>
> >>>> Gah. Actually, that all looks correct, so toss the theory I had out the
> >>>> window. What output do you get from 'ir-keytable -t' when you press
> >>>> some buttons on your remote?
> >>>>
> >>>>
> >>>>
> >>>>>> -------Original Message-------
> >>>>>> From: Jarod Wilson <jarod@...>
> >>>>>> To: greg <greg@...>
> >>>>>> Cc: lirc-list@...
> >>>>>> Subject: Re: imon ffdc rc6 only recognizing some buttons
> >>>>>> Sent: 13 May '11 6:50am
> >>>>>>
> >>>>>> On May 12, 2011, at 9:10 PM, greg wrote:
> >>>>>>
> >>>>>>> lirc is somewhat working but only the left/right/up/down buttons seem to
> >>>>>>> be recognized. irw echos various control characters for those 4 buttons
> >>>>>>> and nothing else for the other buttons.
> >>>>>>
> >>>>>> If you're seeing control characters, then you don't have lircd attaching
> >>>>>> to the correct input event device. You should see KEY_UP, KEY_DOWN, etc.
> >>>>>> if you have the right one.
> >>>>>>
> >>>>>>
> >>>>>>> this box and remote have been
> >>>>>>> in service for a few years and previously working well prior to Maverick
> >>>>>>> and the recent driver changes so i do not think it's a hardware issue.
> >>>>>>
> >>>>>> Yeah, doesn't sound like it.
> >>>>>>
> >>>>>>
> >>>>>>> thanks for any advice.
> >>>>>>> Greg
> >>>>>>>
> >>>>>>> here is a variety of background info on the box and config:
> >>>>>>> - antec fusion case with the imon ffdc usb receiver.
> >>>>>>> - phillips rc6 remote
> >>>>>>> - ubuntu natty 32 bit. kernel 2.6.38-8
> >>>>>>>
> >>>>>>> /etc/init.d/lirc changes:
> >>>>>>> i've commented out the stuff that "blats the protocol"
> >>>>>>
> >>>>>> Possibly not entirely. If you have the ir-keytable utility installed,
> >>>>>> I'm guessing you also have a udev rule that is doing some scribbling
> >>>>>> of keytable and/or protocol, possibly incorrectly with the imon
> >>>>>> devices...
> >>>>>>
> >>>>>> ...
> >>>>>>> [ 28.572614] imon 3-5:1.0: 0xffdc iMON LCD, MCE IR (id 0x9f)
> >>>>>>> [ 28.572618] imon 3-5:1.0: imon_set_display_type: overriding
> >>>>>>> display type to 1 via modparam
> >>>>>>
> >>>>>> Side note: you're overriding your display type from LCD to VFD.
> >>>>>>
> >>>>>> ...
> >>>>>>> ir-keytable output:
> >>>>>>> Found /sys/class/rc/rc0/ (/dev/input/event4) with:
> >>>>>>> Driver imon, table rc-imon-mce
> >>>>>>> Supported protocols: RC-6
> >>>>>>> Enabled protocols: RC-6
> >>>>>>> Repeat delay = 500 ms, repeat period = 33 ms
> >>>>>>
> >>>>>> ir-keytable -r output, please. It should confirm a suspicion I have.
> >>>>
> >>
> >>
> >> --
> >> Jarod Wilson
> >> jarod@...
> >>
> >>
> >>
> >>
>
|