Linux Infrared Remote Control

I have one linux box that can running lircemu or lircd.

And I have one windows box that running some lirc client programm 
(progdvb.com) that can connect to lirc linux server.

I dont have any IR devices nor linux, nor windows.

I want to control windows programm on win box from my linux machine from 
concole or from glircemu.

I run lircemu - but lircemu dont listen on 8765 port. Lircemu create 
socket /tmp/lircd - but I dont know how tell lircd to use it (read 
command from this socket) and send commands to all lircd clients.

What driver should I choose when I configure lircd?
(I dont have any IR devices)

How to tell lircd not use driver, but use socket, created by lircemu?

I compile lirc with lircd(sir)
then I run
lircd --device=/tmp/lircd -n --listen=8765
and connect to port 8765 from windows box:
lircd 0.6.6: accepted new client from 10.0.2.7
lircd 0.6.6: could not open /dev/lircd2
lircd 0.6.6: default_init(): No such device
lircd 0.6.6: caught signal
Terminated

Dont lircd undenstand socket, created by lircemu?

sorry for bad english
-- 
Sergey ICQ: 3391980
bane@...
http://slashzone.ru
WMID 032319388768 Z048530073762

Please help me=20
I have card zoltrix tv genie and radio but I must to find driver
Do you have to send me ?

thanks ,Stela Macedonia

Hi,

I need help getting the fly video 3000 remote to work.

Im using lirc-0.6.6 and when i configure it i select FlyVideo 98/FM 
/2000S (card=56). I think this is the right one but when i try to 
modprobe lirc_gpio i get the following output.

/lib/modules/2.4.20/v4l2/bttv.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, 
including invalid IO or IRQ parameters.
     You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20/v4l2/bttv.o: insmod /lib/modules/2.4.20/v4l2/bttv.o 
failed
/lib/modules/2.4.20/v4l2/bttv.o: insmod lirc_gpio failed


Im using the saa7134 driver, not the bttv one. i dont know what else to do.


Russell