JFF Network Management System (NMS)

Sorry for the flood of messages, but I really would like to get this running
on fedora core 1.  New problem, I've found a different install doc which
I've followed to find and download all the packages and I'm cross ref that
with the Debian install guide.  In the debian install guide it says to copy
tac_plus.conf from the docs directory, but there is no file with that
name...but I've found a file called tac_plus.cfg, but the /etc/tac_plus
directory does not exist for me to copy this file into due to the fact that
I have not installed tac_plus yet (no apt for this in fedora) and when I try
to build tac_plus as per the debian guide, I get an error stating that it
cant find libmysqlclient...unless I remove the --prefix=/usr switch and then
it configures OK, but on the make tac_plus it fails, so I edited the mysql.h
file and changed DB to db and and reran the entire build process only to
fail on the make tac_plus (funny, when I ran configure again, with the
--prefix, this time it worked...)...this is so frustrating.  Compared to the
debian install, this has been a total problem filled affair and I wish I
could just use debian again...but unfortunatly debian wont detect this stupd
Adapted 2400a raid controller...Could someone please give me some clear
guidance on a fedora install...Thanks.



-----Original Message-----
From: Jason Humes [mailto:jhumes@...] 
Sent: Friday, June 11, 2004 3:11 PM
To: 'jffnms-users@...'
Subject: RE: [jffnms-users] Installing on Fedora


For example, the debian install guide says to install libdbd-perl and if I
try to do an apt-get for this it fails...if I search for this, I cant find
it.  Also, in the more detailed part of the required packages for install,
it lists phplib (for example) and I cant apt-get or find this anywhere on
the net...yet when I installed JFFNMS on debian, I had no problem
apt-getting this...hrmm.  Thanks for any help.




-----Original Message-----
From: Jason Humes [mailto:jhumes@...] 
Sent: Friday, June 11, 2004 10:07 AM
To: 'Javier Szyszlican'; 'jffnms-users@...'
Subject: RE: [jffnms-users] Installing on Fedora


Hi
Thanks for the reply...so should I follow the Debian install guide and just
install the packages that I can find?  Thanks

-----Original Message-----
From: Javier Szyszlican [mailto:javier@...] 
Sent: Wednesday, June 09, 2004 4:23 PM
Cc: 'jffnms-users@...'
Subject: Re: [jffnms-users] Installing on Fedora


Hi Jason,

I think you can get most of your packages directly from Fedora, then get
rrdtool (if not already in Fedora from their site), and fping 
from rpmfind.net

Javier

Jason Humes wrote:
> Hi
> I'm going to be installing JFFNMS on Fedora and last time I tried to 
> do this I had very much trouble trying to find all of the required 
> pieces of software as listed in the JFFNMS install guide.  When I 
> installed on Debian, I had no problem using apt-get to install all the 
> packages, yet in Fedora, apt could not get all the packages and I had 
> a heck of a time searching the web for these.  Does anyone have any 
> ideas as to how to go about installing on Fedora, or where to get all 
> the required software.  Thanks
> 
> Jason
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by: GNOME Foundation
> Hackers Unite!  GUADEC: The world's #1 Open Source Desktop Event. 
> GNOME Users and Developers European Conference, 28-30th June in Norway 
> http://2004/guadec.org _______________________________________________
> jffnms-users mailing list
> jffnms-users@...
> https://lists.sourceforge.net/lists/listinfo/jffnms-users

-- 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Javier Szyszlican, Project Leader, JFFNMS
javier@...

I hope JFFNMS or I were helpful to you, if you
can, please donate at http://jffnms.org/donate



-------------------------------------------------------
This SF.Net email is sponsored by: GNOME Foundation
Hackers Unite!  GUADEC: The world's #1 Open Source Desktop Event. GNOME
Users and Developers European Conference, 28-30th June in Norway
http://2004/guadec.org _______________________________________________
jffnms-users mailing list
jffnms-users@...
https://lists.sourceforge.net/lists/listinfo/jffnms-users


-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
From Windows to Linux, servers to mobile, InstallShield X is the one
installation-authoring solution that does it all. Learn more and evaluate
today! http://www.installshield.com/Dev2Dev/0504
_______________________________________________
jffnms-users mailing list
jffnms-users@...
https://lists.sourceforge.net/lists/listinfo/jffnms-users


-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
From Windows to Linux, servers to mobile, InstallShield X is the one
installation-authoring solution that does it all. Learn more and evaluate
today! http://www.installshield.com/Dev2Dev/0504
_______________________________________________
jffnms-users mailing list
jffnms-users@...
https://lists.sourceforge.net/lists/listinfo/jffnms-users

Hi
Thanks for the reply...so should I follow the Debian install guide and just
install the packages that I can find?  Thanks

-----Original Message-----
From: Javier Szyszlican [mailto:javier@...] 
Sent: Wednesday, June 09, 2004 4:23 PM
Cc: 'jffnms-users@...'
Subject: Re: [jffnms-users] Installing on Fedora


Hi Jason,

I think you can get most of your packages directly from Fedora, then get
rrdtool (if not already in Fedora from their site), and fping 
from rpmfind.net

Javier

Jason Humes wrote:
> Hi
> I'm going to be installing JFFNMS on Fedora and last time I tried to 
> do this I had very much trouble trying to find all of the required 
> pieces of software as listed in the JFFNMS install guide.  When I 
> installed on Debian, I had no problem using apt-get to install all the 
> packages, yet in Fedora, apt could not get all the packages and I had 
> a heck of a time searching the web for these.  Does anyone have any 
> ideas as to how to go about installing on Fedora, or where to get all 
> the required software.  Thanks
> 
> Jason
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by: GNOME Foundation
> Hackers Unite!  GUADEC: The world's #1 Open Source Desktop Event. 
> GNOME Users and Developers European Conference, 28-30th June in Norway 
> http://2004/guadec.org _______________________________________________
> jffnms-users mailing list
> jffnms-users@...
> https://lists.sourceforge.net/lists/listinfo/jffnms-users

-- 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Javier Szyszlican, Project Leader, JFFNMS
javier@...

I hope JFFNMS or I were helpful to you, if you
can, please donate at http://jffnms.org/donate



-------------------------------------------------------
This SF.Net email is sponsored by: GNOME Foundation
Hackers Unite!  GUADEC: The world's #1 Open Source Desktop Event. GNOME
Users and Developers European Conference, 28-30th June in Norway
http://2004/guadec.org _______________________________________________
jffnms-users mailing list
jffnms-users@...
https://lists.sourceforge.net/lists/listinfo/jffnms-users

Hi,
It's the first time i'm using JFFMNS and I create a new Zone. I was able
to insert some hosts in, but when I try to add some interfaces on a host
the jff v0.75 create in "Interface Admin" a No Interface Type. I can't
understand why it doesn't create the new interface under Physical
Interfaces.

I create it clicking over "Host & interfaces" then "Hosts", view
interfaces and the Add from Interface Administrator.
It's the right procerdure?

Can you help me?

Thanks in advance.

Aldo Canepa
ADSL Manager

VILLAGE SRL=20
Via Brigata Liguria 3/21 - 16121 Genova
Tel. +39 010 5704878
Fax + 39 010 5957613
E-mail: acanepa@...
 http://www.village.it
 http://www.semplice.it
> ......................................................................
> ........
>=20

On Thursday 10 June 2004 12:56, LIMA David wrote:
> You have the same problem than me and other friends with some version of
> php4
>
> Try this to see If you have same thing
>
> #####################################################
> ### change www-data with you apache user
> #####################################################
> srv-deb:/# su www-data
> srv-deb:/$ php4 -q /opt/jffnms/engine/poller.php
>
> Warning: main(../conf/config.php): failed to open stream: No such file or
> directory in /opt/jffnms/engine/poller.php on line 22
>
> Warning: main(): Failed opening '../conf/config.php' for inclusion
> (include_path='.:/usr/share/php:/usr/share/pear') in
> /opt/jffnms/engine/poller.php on line 22 ==> doesn't work

Sure, doesn't work because php script have relative paths, no absolute
paths.

> srv-deb:/$ cd /opt/jffnms/engine/
> srv-deb:/opt/jffnms/engine$  
> Executing: /usr/bin/php4 -q /opt/jffnms/engine/poller.php 2 0 1 0 0 &
>
>  :  H   2 : Poller Start : 43 Items.
>  :  H   2 :  I   2 :  P   1 : reachability_start:ping(): 40c83c838c456 ->
>  : buffer(): 1 (time P:17.44 | 0.72) H   2 :  I   3 :  P  10 :
>  : verify_interface_number(): 1 -> verify_interface_number():
>  : interfacenumber not changed (time P:6.39 | 2.34) H   2 :  I   4 :  P  10
>  : : verify_interface_number(): 4 -> verify_interface_number():
>  : interfacenumber not changed (time P:43.65
>
> ==> wit works
>
> so change your crontab and put something like
>
> */5 * * * * www-data cd /opt/jffnms/engine/ && php4 -q poller.php
> >/dev/null 2>&1
>
> if the cront start on /opt/jffnms/engine it will work
>
> Hope that's help

I run cd /opt/jffnms/engine/ && php4 -q poller.php but i don't have
any output, appears to be ok... but i cant display any graph:
"The RRDTool files for Interface ID xxx (from Host ID xx), has not been
created by the Poller Process yet"
:(

> PS: I see that your mysql module isn't loaded, check your php.ini and
> install php4-mysql and php4-mysql-dev if you don't have it

I have php4-mysql debian packages installed, and extension=mysql.so
in the php.ini configuration, but php4 -m don show mysql module.

_/\   _|/ |> |> | [ |>_  /\__
   \_/ |\ |\ |\ | [ |\ \/    \_/\____     
  -(GnuPG Key ID:  1024D/E839344F)-

Is there a way to have JFFNMS catalog and display the 'show ver'
information of Cisco devices?

Thank You,

Greg Leggett
Thompson & Knight LLP
Network Administrator
--------------------------
Sent from my BlackBerry Wireless Handheld