Home / Browse / iTVC15 MPEG Capture Driver for Linux / Mail / Archive

Donate

iTVC15 MPEG Capture Driver for Linux

Email Archive: ivtv-devel (read-only)

2003:	_Jan	_Feb (245)	_Mar (714)	_Apr (690)	_May (946)	_Jun (454)	_Jul (398)	_Aug (339)	_Sep (328)	_Oct (609)	_Nov (742)	_Dec (843)
2004:	_Jan (1136)	_Feb (558)	_Mar (830)	_Apr (656)	_May (785)	_Jun (1148)	_Jul (729)	_Aug (547)	_Sep (1048)	_Oct (1240)	_Nov (762)	_Dec (615)
2005:	_Jan (784)	_Feb (836)	_Mar (1002)	_Apr (966)	_May (980)	_Jun (896)	_Jul (780)	_Aug (927)	_Sep (878)	_Oct	_Nov	_Dec


S	M	T	W	T	F	S
		1	2	3	4	5
		(35)	(43)	(29)	(14)	(26)
6	7	8	9	10	11	12
(32)	(42)	(40)	(49)	(60)	(41)	(19)
13	14	15	16	17	18	19
(33)	(47)	(44)	(38)	(46)	(19)	(27)
20	21	22	23	24	25	26
(36)	(23)	(24)	(34)	(35)	(42)	(9)
27	28	29	30	31
(17)	(31)	(35)	(18)	(14)

[ivtv-devel] Re: ivtv mplayer patch

From: Patrick @ Mythtv <mythtv@pd...> - 2005-03-30 21:05

Attachments: Message as HTML

I've installed the patched version and compiled it.
 
Did not yet tested it on my PVR350 out, but on my monitor.
The problem is that the remote control is n't working any more with mplayer.
 
gr
 
Patrick

[ivtv-devel] PVR 150MCE encoding/decoding problems in mythtv (ivtv 0.3.2p)

From: Haukur Hafsteinsson <haukur@ma...> - 2005-03-30 11:18

Attachments: Message as HTML

Hi All,

My system: 
866 MHz PIII 
256Mb ram 
Mythtv 0.17 
Kernel 2.6.11.5 
SuSE 9.2 

I am currently using the 0.3.2p version of the ivtv driver on my system. 
After installation with modprobe, I get a perfect video and sound with 
mplayer, when streaming from /dev/video0. If I then use mythtv, the 
picture sometimes has small rectangles with wrong color here and there 
(blocky picture), sound is ok. I know that there is not much cpu power 
available (about 10% idle), but I have reduced the bitrate in mythtv (cpu 
becomes 30-40% idle), but no result. If I then again use mplayer, it shows 
me the same corrupt picture as mythtv. I have to remove and insert the 
ivtv module to get it working again with mplayer. 

Any ideas?

Thanks 
Haukur.

Re: [ivtv-devel] PVR 150MCE encoding/decoding problems in mythtv (ivtv 0.3.2p)

From: Balaji Ramani <balaji@ne...> - 2005-03-30 14:24

If the picture is blocky, then it is most likely that your bitrate is too low
Try a setting of around 3000 or 4000 to get proper picture quality.

- Balaji

On Wednesday 30 March 2005 6:18 am, Haukur Hafsteinsson wrote:
> Hi All,
>
> My system:
> 866 MHz PIII
> 256Mb ram
> Mythtv 0.17
> Kernel 2.6.11.5
> SuSE 9.2
>
> I am currently using the 0.3.2p version of the ivtv driver on my system.
> After installation with modprobe, I get a perfect video and sound with
> mplayer, when streaming from /dev/video0. If I then use mythtv, the
> picture sometimes has small rectangles with wrong color here and there
> (blocky picture), sound is ok. I know that there is not much cpu power
> available (about 10% idle), but I have reduced the bitrate in mythtv (cpu
> becomes 30-40% idle), but no result. If I then again use mplayer, it shows
> me the same corrupt picture as mythtv. I have to remove and insert the
> ivtv module to get it working again with mplayer.
>
> Any ideas?
>
> Thanks
> Haukur.

Re: [ivtv-devel] PVR 150MCE encoding/decoding problems in mythtv (ivtv 0.3.2p)

From: Freaky <freaky@ba...> - 2005-03-30 17:32

Personally I have no experience with MythTV, but it sounds to me like a 
registry setting is being changed or something. If I were you I'd write 
down all the register settings just after loading the module and compare 
those with the registry settings after MythTV has loaded. You can 
monitor the registers with the ivtvctl util.

Good luck

Haukur Hafsteinsson wrote:
> 
> Hi All,
> 
> My system:
> 866 MHz PIII
> 256Mb ram
> Mythtv 0.17
> Kernel 2.6.11.5
> SuSE 9.2
> 
> I am currently using the 0.3.2p version of the ivtv driver on my system. 
> After installation with modprobe, I get a perfect video and sound with 
> mplayer, when streaming from /dev/video0. If I then use mythtv, the 
> picture sometimes has small rectangles with wrong color here and there 
> (blocky picture), sound is ok. I know that there is not much cpu power 
> available (about 10% idle), but I have reduced the bitrate in mythtv 
> (cpu becomes 30-40% idle), but no result. If I then again use mplayer, 
> it shows me the same corrupt picture as mythtv. I have to remove and 
> insert the ivtv module to get it working again with mplayer.
> 
> Any ideas?
> 
> Thanks
> Haukur.

[ivtv-devel] tuner audio while recording from composite

From: Joe Briggs <jbriggs@br...> - 2005-03-30 15:25

When I record from composite, I get BOTH audio from the line in as well
as audio from the last channel selected. Does anyone know how to correct
this?

Re: [ivtv-devel] tuner audio while recording from composite

From: Tyler Trafford <ttrafford@gm...> - 2005-03-30 16:07

Joe Briggs <jbriggs@...> wrote:
> When I record from composite, I get BOTH audio from the line in as well
> as audio from the last channel selected. Does anyone know how to correct
> this?

Right now, the best fix is to load wm8775 with the mixer=2 parameter. 
(Yeah, this isn't ideal.)
-- 
Tyler Trafford

Re: [ivtv-devel] tuner audio while recording from composite

From: Chris Kennedy <ckennedy@km...> - 2005-03-30 16:22

Hmm, this fixes my tuner input audio on the pvr150, isn't this something
easy to set for the NTSC tuner in the driver, I'm not sure if there's
another caveat there?

Thanks,
Chris
On Wed, Mar 30, 2005 at 11:06:56AM -0500, Tyler Trafford wrote:
> Joe Briggs <jbriggs@...> wrote:
> > When I record from composite, I get BOTH audio from the line in as well
> > as audio from the last channel selected. Does anyone know how to correct
> > this?
> 
> Right now, the best fix is to load wm8775 with the mixer=2 parameter. 
> (Yeah, this isn't ideal.)
> -- 
> Tyler Trafford
> 
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> ivtv-devel mailing list
> ivtv-devel@...
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel

-- 
---
 Chris Kennedy / ckennedy@...
  Engineer KMOS-TV/KTBG-FM
  Broadcasting Services Department
  Central Missouri State University

[ivtv-devel] ivtv max quality settings

From: Joe Briggs <jbriggs@br...> - 2005-03-30 12:55

Can anyone (especially Cory or Kevin) recommend encoding settings for
max low-bitrate quality (i.e., GOP size, bframes, cc, etc.)?
-- 
Joe Briggs
Briggs Media Systems
 http://www.briggsmedia.com
jbriggs@...
Tel: 603.232.3115 FAX 603.625.5809
Mobile: 603.493.2386

[ivtv-devel] [ivtv-devel]Re: Linux/MythTV drivers for 2nd gen PVR cards

From: Loredana Lacatus <lori.l@pl...> - 2005-03-30 09:38

Attachments: Message as HTML Message as HTML

Re: [ivtv-devel] [ivtv-devel]Re: Linux/MythTV drivers for 2nd gen PVR cards

From: Joe Briggs <jbriggs@br...> - 2005-03-30 11:28

Wow, sweet package this pluto! So will it support the PV-967 pvr?
http://www.provideo.com.tw/PV-967.htm

On Wed, 2005-03-30 at 04:38, Loredana Lacatus wrote:
> You can download the CX88 drivers at 
> 
>  
> 
> http://plutohome.com/support/index.php?section=packageDownload&pkid=338
> 
>  
> 
>  
> 
> Loredana Lacatus
> 
> Pluto
> 
> ..........................................................
> 
> Phone: (877) pluto-4-u ext. 110
> 
> Email: lori.l@...
> 
> Web: http://www.plutohome.com
> 
> 
> 
> ..........................................................
> 
> 
>  
> 
>

[ivtv-devel] PVR 150 Tuner Type Unknown

From: Andreas <gentryx@gm...> - 2005-03-30 10:24

Hi,

I've just installed the 0.3.2p drivers on my Gentoo Box with a PVR-150
PAL and was completely surprised: It instantly worked like a charm!
;-) I can record for hours and both, picture and sound, are just
perfect. Many thanks to all of you (and especially Chris)!

However, one problem remains: I can't switch the channels. When I load
the tveeprom module, i get a syslog messages like this:

  Mar 30 11:48:14 [kernel] tveeprom: tuner = <unknown> (idx = 97, type = 65543)

and when I run ptune-ui.pl, the log always says something like (for a complete log, see below):

  Mar 30 11:48:40 [kernel] tuner: tv freq set to 399.25
  Mar 30 11:48:40 [kernel] tuner: tuner type not set

Do you have any ideas? Thanks!

-Andreas


=== SOFTWARE SETUP ===

I've got a Gentoo with kernel 2.6.11 and installed the ivtv-drivers
0.3.2p via "make && make install". 

To load the modules, I run the following:

  #!/bin/bash
  echo "*** removing modules   ***"
  rmmod cx25840
  rmmod tuner
  rmmod wm8775
  rmmod ivtv
  echo "*** loading modules    ***"
  modprobe cx25840 debug=1
  modprobe tuner debug=1
  modprobe wm8775 debug=1
  modprobe ivtv ivtv_std=2 tuner=50
  echo "*** setting up devices ***"
  ivtvctl -d /dev/video0 -u 1 -f width=720,height=576 -p 6


=== HARDWARE SETUP ===

My card is a WinTV PVR 150 PAL-B/G 26034 REV C197. I've a high res
photo at http://jetzweb.de/ina/pict4976.jpg if that is any help.


=== SYSLOG ===

Mar 30 11:48:08 [kernel] ivtv: Removing Card #0.
Mar 30 11:48:09 [kernel] ivtv: Removed WinTV PVR 150, card #0
Mar 30 11:48:09 [kernel] tuner: Ignoring new-style parameters in presence of obsolete ones
Mar 30 11:48:09 [kernel] wm8775: Init
Mar 30 11:48:09 [kernel] ivtv: ==================== START INIT IVTV ====================
Mar 30 11:48:09 [kernel] ivtv: version 0.3.2 (p) loading
Mar 30 11:48:09 [kernel] ivtv: Linux version: 2.6.11-gentoo-r4 preempt K7 gcc-3.4
Mar 30 11:48:09 [kernel] ivtv: In case of problems please include the debug info
Mar 30 11:48:09 [kernel] ivtv: between the START INIT IVTV and END INIT IVTV lines when
Mar 30 11:48:09 [kernel] ivtv: mailing the ivtv-devel mailinglist.
Mar 30 11:48:09 [kernel] ivtv: Autodetected WinTV PVR 150 card
Mar 30 11:48:09 [kernel] ivtv: Found an iTVC16 based chip
Mar 30 11:48:09 [kernel] ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 3 (level, low) -> IRQ 3
Mar 30 11:48:09 [kernel] ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
Mar 30 11:48:09 [kernel] ivtv: i2c attach [client=tveeprom,ok]
Mar 30 11:48:14 [kernel] cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded.
Mar 30 11:48:14 [kernel] cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408
Mar 30 11:48:14 [kernel] cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84
Mar 30 11:48:14 [kernel] ivtv: i2c attach [client=cx25840[0],ok]
Mar 30 11:48:14 [kernel] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Mar 30 11:48:14 [kernel] ivtv: i2c attach [client=(tuner unset),ok]
Mar 30 11:48:14 [kernel] wm8775: starting probe for adapter ivtv i2c driver #0 (0x10005)
Mar 30 11:48:14 [kernel] wm8775: detecting client on address 0x36
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[0]=2e00
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[1]=0e00
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[2]=1600
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[3]=1800
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[4]=1a00
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[5]=1c00
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[6]=1e00
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[7]=2000
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[8]=2200
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[9]=2400
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[10]=2600
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[11]=2800
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[12]=2a00
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R23]=2e01 added Reset with default 1
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R7]=0e00 added TOD with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1600 added ADCHPD with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1620 added ADCWL with default 2
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1620 added ADCBCP with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1620 added ADCLRP with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1622 added ADCFMT with default 2
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=1800 added ADCMS with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=1800 added ADCOSR with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=1802 added ADCRATE with default 2
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=1a00 added AINPD with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=1a00 added ADCPD with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=1a00 added PWDN with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R14]=1c00 added ZCLA with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R14]=1ccf added LAG with default 207
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R15]=1e00 added ZCRA with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R15]=1ecf added RAG with default 207
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=2000 added LCSEL with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=207b added LCT with default 11
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=2200 added LCEN with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=2200 added ALCZC with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=2200 added HLD with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R18]=2430 added DCY with default 3
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R18]=2432 added ATK with default 2
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R19]=2600 added NGTH with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R19]=2600 added NGAT with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R20]=2820 added TRANWIN with default 2
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=2a00 added MUTELA with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=2a00 added MUTERA with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=2a01 added AMX with default 1
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[0]=2e01
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[1]=0e00
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[2]=1622
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[3]=1802
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[4]=1a00
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[5]=1ccf
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[6]=1ecf
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[7]=207b
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[8]=2200
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[9]=2432
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[10]=2600
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[11]=2826
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[12]=2a01
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[0]=2e00
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[1]=0e00
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[2]=1600
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[3]=1800
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[4]=1a00
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[5]=1c00
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[6]=1e00
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[7]=2000
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[8]=2200
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[9]=2400
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[10]=2600
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[11]=2800
Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[12]=2a00
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R23]=2e01 added Reset with default 1
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R7]=0e00 added TOD with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1600 added ADCHPD with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1620 added ADCWL with default 2
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1620 added ADCBCP with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1620 added ADCLRP with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1622 added ADCFMT with default 2
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=1800 added ADCMS with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=1800 added ADCOSR with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=1802 added ADCRATE with default 2
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=1a00 added AINPD with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=1a00 added ADCPD with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=1a00 added PWDN with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R14]=1c00 added ZCLA with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R14]=1ccf added LAG with default 207
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R15]=1e00 added ZCRA with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R15]=1ecf added RAG with default 207
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=2000 added LCSEL with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=207b added LCT with default 11
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=2200 added LCEN with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=2200 added ALCZC with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=2200 added HLD with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R18]=2430 added DCY with default 3
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R18]=2432 added ATK with default 2
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R19]=2600 added NGTH with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R19]=2600 added NGAT with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R20]=2820 added TRANWIN with default 2
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=2a00 added MUTELA with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=2a00 added MUTERA with default 0
Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=2a01 added AMX with default 1
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[0]=2e01
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[1]=0e00
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[2]=1622
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[3]=1802
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[4]=1a00
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[5]=1ccf
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[6]=1ecf
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[7]=207b
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[8]=2200
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[9]=2432
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[10]=2600
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[11]=2826
Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[12]=2a01
Mar 30 11:48:14 [kernel] wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02
Mar 30 11:48:14 [kernel] wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00
Mar 30 11:48:14 [kernel] wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03
Mar 30 11:48:14 [kernel] wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00
Mar 30 11:48:14 [kernel] wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00
Mar 30 11:48:14 [kernel] wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01
Mar 30 11:48:14 [kernel] wm8775: Updating register 0 (R23), config: 2e01 active: 2e00.
Mar 30 11:48:14 [kernel] wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00.
Mar 30 11:48:14 [kernel] wm8775: Updating register 2 (R11), config: 1622 active: 1621.
Mar 30 11:48:14 [kernel] wm8775: Updating register 3 (R12), config: 1802 active: 1902.
Mar 30 11:48:14 [kernel] wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00.
Mar 30 11:48:14 [kernel] wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf.
Mar 30 11:48:14 [kernel] wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf.
Mar 30 11:48:14 [kernel] wm8775: Skipping register 7 (R16), config: 207b active: 207b.
Mar 30 11:48:14 [kernel] wm8775: Skipping register 8 (R17), config: 2200 active: 2200.
Mar 30 11:48:14 [kernel] wm8775: Updating register 9 (R18), config: 2432 active: 2482.
Mar 30 11:48:14 [kernel] wm8775: Updating register 10 (R19), config: 2600 active: 2601.
Mar 30 11:48:14 [kernel] wm8775: Skipping register 11 (R20), config: 2826 active: 2826.
Mar 30 11:48:14 [kernel] wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f.
Mar 30 11:48:14 [kernel] ivtv: i2c attach [client=wm8775[0],ok]
Mar 30 11:48:14 [kernel] tveeprom: Hauppauge: model = 26034, rev = C197, serial# = 7765471
Mar 30 11:48:14 [kernel] tveeprom: tuner = <unknown> (idx = 97, type = 65543)
Mar 30 11:48:14 [kernel] tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x44, v4l2 = 0x00000e07)
Mar 30 11:48:14 [kernel] tveeprom: audio_processor = MSP3400C (type = 4)
Mar 30 11:48:14 [kernel] ivtv: Tuner Type 65543, Tuner formats 0x00000e07, Radio: yes, Model 0x008d1657, Revision 0xe28c64b8
Mar 30 11:48:14 [kernel] ivtv: PAL tuner detected
Mar 30 11:48:14 [kernel] ivtv: Radio detected
Mar 30 11:48:15 [kernel] ivtv: Encoder revision: 0x02040024
Mar 30 11:48:15 [kernel] ivtv: Encoder Firmware may be buggy, use version 0x02040011
Mar 30 11:48:15 [kernel] ivtv: Configuring WinTV PVR 150 card with 5 streams
Mar 30 11:48:15 [kernel] ivtv: Registered v4l2 device, streamtype 0 minor 0
Mar 30 11:48:15 [kernel] ivtv: Create DMA stream 0 using 1024 16384 byte buffers  0 kbytes total
Mar 30 11:48:15 [kernel] ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers  16777216 kbytes total
Mar 30 11:48:15 [kernel] ivtv: Registered v4l2 device, streamtype 1 minor 32
Mar 30 11:48:15 [kernel] ivtv: Create DMA stream 1
Mar 30 11:48:15 [kernel] ivtv: Allocate DMA stream 1
Mar 30 11:48:15 [kernel] ivtv: Registered v4l2 device, streamtype 2 minor 224
Mar 30 11:48:15 [kernel] ivtv: Create stream 2 using 40 52224 byte buffers  0 kbytes total
Mar 30 11:48:15 [kernel] ivtv: Allocate stream 2 using 40 52224 byte buffers  2097152 kbytes total
Mar 30 11:48:15 [kernel] ivtv: Registered v4l2 device, streamtype 3 minor 24
Mar 30 11:48:15 [kernel] ivtv: Create DMA stream 3 using 455 4608 byte buffers  0 kbytes total
Mar 30 11:48:15 [kernel] ivtv: Allocate DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
Mar 30 11:48:15 [kernel] ivtv: Registered v4l2 device, streamtype 4 minor 64
Mar 30 11:48:15 [kernel] ivtv: Create stream 4
Mar 30 11:48:15 [kernel] ivtv: Allocate stream 4
Mar 30 11:48:15 [kernel] ivtv: Setting Tuner 65543
Mar 30 11:48:15 [kernel] ivtv: ivtv_enc_thread: pid = 14857, itv = 0xe28bb3a0
Mar 30 11:48:15 [kernel] ivtv: Switching standard to PAL.
Mar 30 11:48:15 [kernel] ivtv: Initialized WinTV PVR 150, card #0
Mar 30 11:48:15 [kernel] ivtv: ====================  END INIT IVTV  ====================
Mar 30 11:48:17 [fetchmail] Authorization failure on gentry@... (previously authorized)_
Mar 30 11:48:17 [fetchmail] Query status=3 (AUTHFAIL)_
Mar 30 11:48:26 [fetchmail] sleeping at Wed Mar 30 11:48:26 2005_
Mar 30 11:48:35 [kernel] tuner: tv freq set to 343.25
Mar 30 11:48:35 [kernel] tuner: tuner type not set
Mar 30 11:48:40 [kernel] tuner: tv freq set to 399.25
Mar 30 11:48:40 [kernel] tuner: tuner type not set

Re: [ivtv-devel] PVR 150 Tuner Type Unknown

From: Andreas <gentryx@gm...> - 2005-03-30 10:53

Oh, shame on me. Just forget it, 'cause I forgot to remove the old
/lib/modules/2.6.11-gentoo-r4/kernel/drivers/media/video/tveeprom.ko
file from my kernel (. Now it's all working - yeah! 

Thanks!

-Andreas


On 12:24 Wed 30 Mar     , Andreas Schäfer wrote:
> Hi,
> 
> I've just installed the 0.3.2p drivers on my Gentoo Box with a PVR-150
> PAL and was completely surprised: It instantly worked like a charm!
> ;-) I can record for hours and both, picture and sound, are just
> perfect. Many thanks to all of you (and especially Chris)!
> 
> However, one problem remains: I can't switch the channels. When I load
> the tveeprom module, i get a syslog messages like this:
> 
>   Mar 30 11:48:14 [kernel] tveeprom: tuner = <unknown> (idx = 97, type = 65543)
> 
> and when I run ptune-ui.pl, the log always says something like (for a complete log, see below):
> 
>   Mar 30 11:48:40 [kernel] tuner: tv freq set to 399.25
>   Mar 30 11:48:40 [kernel] tuner: tuner type not set
> 
> Do you have any ideas? Thanks!
> 
> -Andreas
> 
> 
> === SOFTWARE SETUP ===
> 
> I've got a Gentoo with kernel 2.6.11 and installed the ivtv-drivers
> 0.3.2p via "make && make install". 
> 
> To load the modules, I run the following:
> 
>   #!/bin/bash
>   echo "*** removing modules   ***"
>   rmmod cx25840
>   rmmod tuner
>   rmmod wm8775
>   rmmod ivtv
>   echo "*** loading modules    ***"
>   modprobe cx25840 debug=1
>   modprobe tuner debug=1
>   modprobe wm8775 debug=1
>   modprobe ivtv ivtv_std=2 tuner=50
>   echo "*** setting up devices ***"
>   ivtvctl -d /dev/video0 -u 1 -f width=720,height=576 -p 6
> 
> 
> === HARDWARE SETUP ===
> 
> My card is a WinTV PVR 150 PAL-B/G 26034 REV C197. I've a high res
> photo at http://jetzweb.de/ina/pict4976.jpg if that is any help.
> 
> 
> === SYSLOG ===
> 
> Mar 30 11:48:08 [kernel] ivtv: Removing Card #0.
> Mar 30 11:48:09 [kernel] ivtv: Removed WinTV PVR 150, card #0
> Mar 30 11:48:09 [kernel] tuner: Ignoring new-style parameters in presence of obsolete ones
> Mar 30 11:48:09 [kernel] wm8775: Init
> Mar 30 11:48:09 [kernel] ivtv: ==================== START INIT IVTV ====================
> Mar 30 11:48:09 [kernel] ivtv: version 0.3.2 (p) loading
> Mar 30 11:48:09 [kernel] ivtv: Linux version: 2.6.11-gentoo-r4 preempt K7 gcc-3.4
> Mar 30 11:48:09 [kernel] ivtv: In case of problems please include the debug info
> Mar 30 11:48:09 [kernel] ivtv: between the START INIT IVTV and END INIT IVTV lines when
> Mar 30 11:48:09 [kernel] ivtv: mailing the ivtv-devel mailinglist.
> Mar 30 11:48:09 [kernel] ivtv: Autodetected WinTV PVR 150 card
> Mar 30 11:48:09 [kernel] ivtv: Found an iTVC16 based chip
> Mar 30 11:48:09 [kernel] ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 3 (level, low) -> IRQ 3
> Mar 30 11:48:09 [kernel] ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
> Mar 30 11:48:09 [kernel] ivtv: i2c attach [client=tveeprom,ok]
> Mar 30 11:48:14 [kernel] cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded.
> Mar 30 11:48:14 [kernel] cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408
> Mar 30 11:48:14 [kernel] cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84
> Mar 30 11:48:14 [kernel] ivtv: i2c attach [client=cx25840[0],ok]
> Mar 30 11:48:14 [kernel] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> Mar 30 11:48:14 [kernel] ivtv: i2c attach [client=(tuner unset),ok]
> Mar 30 11:48:14 [kernel] wm8775: starting probe for adapter ivtv i2c driver #0 (0x10005)
> Mar 30 11:48:14 [kernel] wm8775: detecting client on address 0x36
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[0]=2e00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[1]=0e00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[2]=1600
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[3]=1800
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[4]=1a00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[5]=1c00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[6]=1e00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[7]=2000
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[8]=2200
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[9]=2400
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[10]=2600
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[11]=2800
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[12]=2a00
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R23]=2e01 added Reset with default 1
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R7]=0e00 added TOD with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1600 added ADCHPD with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1620 added ADCWL with default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1620 added ADCBCP with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1620 added ADCLRP with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1622 added ADCFMT with default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=1800 added ADCMS with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=1800 added ADCOSR with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=1802 added ADCRATE with default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=1a00 added AINPD with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=1a00 added ADCPD with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=1a00 added PWDN with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R14]=1c00 added ZCLA with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R14]=1ccf added LAG with default 207
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R15]=1e00 added ZCRA with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R15]=1ecf added RAG with default 207
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=2000 added LCSEL with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=207b added LCT with default 11
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=2200 added LCEN with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=2200 added ALCZC with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=2200 added HLD with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R18]=2430 added DCY with default 3
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R18]=2432 added ATK with default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R19]=2600 added NGTH with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R19]=2600 added NGAT with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R20]=2820 added TRANWIN with default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=2a00 added MUTELA with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=2a00 added MUTERA with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=2a01 added AMX with default 1
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[0]=2e01
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[1]=0e00
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[2]=1622
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[3]=1802
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[4]=1a00
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[5]=1ccf
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[6]=1ecf
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[7]=207b
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[8]=2200
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[9]=2432
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[10]=2600
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[11]=2826
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[12]=2a01
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[0]=2e00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[1]=0e00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[2]=1600
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[3]=1800
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[4]=1a00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[5]=1c00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[6]=1e00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[7]=2000
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[8]=2200
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[9]=2400
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[10]=2600
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[11]=2800
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[12]=2a00
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R23]=2e01 added Reset with default 1
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R7]=0e00 added TOD with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1600 added ADCHPD with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1620 added ADCWL with default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1620 added ADCBCP with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1620 added ADCLRP with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=1622 added ADCFMT with default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=1800 added ADCMS with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=1800 added ADCOSR with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=1802 added ADCRATE with default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=1a00 added AINPD with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=1a00 added ADCPD with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=1a00 added PWDN with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R14]=1c00 added ZCLA with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R14]=1ccf added LAG with default 207
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R15]=1e00 added ZCRA with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R15]=1ecf added RAG with default 207
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=2000 added LCSEL with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=207b added LCT with default 11
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=2200 added LCEN with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=2200 added ALCZC with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=2200 added HLD with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R18]=2430 added DCY with default 3
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R18]=2432 added ATK with default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R19]=2600 added NGTH with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R19]=2600 added NGAT with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R20]=2820 added TRANWIN with default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=2a00 added MUTELA with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=2a00 added MUTERA with default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=2a01 added AMX with default 1
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[0]=2e01
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[1]=0e00
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[2]=1622
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[3]=1802
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[4]=1a00
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[5]=1ccf
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[6]=1ecf
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[7]=207b
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[8]=2200
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[9]=2432
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[10]=2600
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[11]=2826
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[12]=2a01
> Mar 30 11:48:14 [kernel] wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02
> Mar 30 11:48:14 [kernel] wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00
> Mar 30 11:48:14 [kernel] wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03
> Mar 30 11:48:14 [kernel] wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00
> Mar 30 11:48:14 [kernel] wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00
> Mar 30 11:48:14 [kernel] wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01
> Mar 30 11:48:14 [kernel] wm8775: Updating register 0 (R23), config: 2e01 active: 2e00.
> Mar 30 11:48:14 [kernel] wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00.
> Mar 30 11:48:14 [kernel] wm8775: Updating register 2 (R11), config: 1622 active: 1621.
> Mar 30 11:48:14 [kernel] wm8775: Updating register 3 (R12), config: 1802 active: 1902.
> Mar 30 11:48:14 [kernel] wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00.
> Mar 30 11:48:14 [kernel] wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf.
> Mar 30 11:48:14 [kernel] wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf.
> Mar 30 11:48:14 [kernel] wm8775: Skipping register 7 (R16), config: 207b active: 207b.
> Mar 30 11:48:14 [kernel] wm8775: Skipping register 8 (R17), config: 2200 active: 2200.
> Mar 30 11:48:14 [kernel] wm8775: Updating register 9 (R18), config: 2432 active: 2482.
> Mar 30 11:48:14 [kernel] wm8775: Updating register 10 (R19), config: 2600 active: 2601.
> Mar 30 11:48:14 [kernel] wm8775: Skipping register 11 (R20), config: 2826 active: 2826.
> Mar 30 11:48:14 [kernel] wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f.
> Mar 30 11:48:14 [kernel] ivtv: i2c attach [client=wm8775[0],ok]
> Mar 30 11:48:14 [kernel] tveeprom: Hauppauge: model = 26034, rev = C197, serial# = 7765471
> Mar 30 11:48:14 [kernel] tveeprom: tuner = <unknown> (idx = 97, type = 65543)
> Mar 30 11:48:14 [kernel] tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x44, v4l2 = 0x00000e07)
> Mar 30 11:48:14 [kernel] tveeprom: audio_processor = MSP3400C (type = 4)
> Mar 30 11:48:14 [kernel] ivtv: Tuner Type 65543, Tuner formats 0x00000e07, Radio: yes, Model 0x008d1657, Revision 0xe28c64b8
> Mar 30 11:48:14 [kernel] ivtv: PAL tuner detected
> Mar 30 11:48:14 [kernel] ivtv: Radio detected
> Mar 30 11:48:15 [kernel] ivtv: Encoder revision: 0x02040024
> Mar 30 11:48:15 [kernel] ivtv: Encoder Firmware may be buggy, use version 0x02040011
> Mar 30 11:48:15 [kernel] ivtv: Configuring WinTV PVR 150 card with 5 streams
> Mar 30 11:48:15 [kernel] ivtv: Registered v4l2 device, streamtype 0 minor 0
> Mar 30 11:48:15 [kernel] ivtv: Create DMA stream 0 using 1024 16384 byte buffers  0 kbytes total
> Mar 30 11:48:15 [kernel] ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers  16777216 kbytes total
> Mar 30 11:48:15 [kernel] ivtv: Registered v4l2 device, streamtype 1 minor 32
> Mar 30 11:48:15 [kernel] ivtv: Create DMA stream 1
> Mar 30 11:48:15 [kernel] ivtv: Allocate DMA stream 1
> Mar 30 11:48:15 [kernel] ivtv: Registered v4l2 device, streamtype 2 minor 224
> Mar 30 11:48:15 [kernel] ivtv: Create stream 2 using 40 52224 byte buffers  0 kbytes total
> Mar 30 11:48:15 [kernel] ivtv: Allocate stream 2 using 40 52224 byte buffers  2097152 kbytes total
> Mar 30 11:48:15 [kernel] ivtv: Registered v4l2 device, streamtype 3 minor 24
> Mar 30 11:48:15 [kernel] ivtv: Create DMA stream 3 using 455 4608 byte buffers  0 kbytes total
> Mar 30 11:48:15 [kernel] ivtv: Allocate DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
> Mar 30 11:48:15 [kernel] ivtv: Registered v4l2 device, streamtype 4 minor 64
> Mar 30 11:48:15 [kernel] ivtv: Create stream 4
> Mar 30 11:48:15 [kernel] ivtv: Allocate stream 4
> Mar 30 11:48:15 [kernel] ivtv: Setting Tuner 65543
> Mar 30 11:48:15 [kernel] ivtv: ivtv_enc_thread: pid = 14857, itv = 0xe28bb3a0
> Mar 30 11:48:15 [kernel] ivtv: Switching standard to PAL.
> Mar 30 11:48:15 [kernel] ivtv: Initialized WinTV PVR 150, card #0
> Mar 30 11:48:15 [kernel] ivtv: ====================  END INIT IVTV  ====================
> Mar 30 11:48:17 [fetchmail] Authorization failure on gentry@... (previously authorized)_
> Mar 30 11:48:17 [fetchmail] Query status=3 (AUTHFAIL)_
> Mar 30 11:48:26 [fetchmail] sleeping at Wed Mar 30 11:48:26 2005_
> Mar 30 11:48:35 [kernel] tuner: tv freq set to 343.25
> Mar 30 11:48:35 [kernel] tuner: tuner type not set
> Mar 30 11:48:40 [kernel] tuner: tv freq set to 399.25
> Mar 30 11:48:40 [kernel] tuner: tuner type not set
> 
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> ivtv-devel mailing list
> ivtv-devel@...
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
> 

--

Re: [ivtv-devel] PVR 150 Tuner Type Unknown

From: Marcel Meier <linux@me...> - 2005-03-30 11:23

Am Mittwoch, 30. M=E4rz 2005 12.24 schrieb Andreas Sch=E4fer:
> Hi,
>=20
> I've just installed the 0.3.2p drivers on my Gentoo Box with a PVR-150
> PAL and was completely surprised: It instantly worked like a charm!
> ;-) I can record for hours and both, picture and sound, are just
> perfect. Many thanks to all of you (and especially Chris)!
>=20
> However, one problem remains: I can't switch the channels. When I load
> the tveeprom module, i get a syslog messages like this:
>=20
>   Mar 30 11:48:14 [kernel] tveeprom: tuner =3D <unknown> (idx =3D 97, typ=
e =3D 65543)
>=20
> and when I run ptune-ui.pl, the log always says something like (for a com=
plete log, see below):
>=20
>   Mar 30 11:48:40 [kernel] tuner: tv freq set to 399.25
>   Mar 30 11:48:40 [kernel] tuner: tuner type not set
>=20
> Do you have any ideas? Thanks!
>=20
> -Andreas
>=20
>=20
> =3D=3D=3D SOFTWARE SETUP =3D=3D=3D
>=20
> I've got a Gentoo with kernel 2.6.11 and installed the ivtv-drivers
> 0.3.2p via "make && make install".=20
>=20
> To load the modules, I run the following:
>=20
>   #!/bin/bash
>   echo "*** removing modules   ***"
>   rmmod cx25840
>   rmmod tuner
>   rmmod wm8775
>   rmmod ivtv
>   echo "*** loading modules    ***"
>   modprobe cx25840 debug=3D1
>   modprobe tuner debug=3D1
>   modprobe wm8775 debug=3D1
>   modprobe ivtv ivtv_std=3D2 tuner=3D50
>   echo "*** setting up devices ***"
>   ivtvctl -d /dev/video0 -u 1 -f width=3D720,height=3D576 -p 6
>=20
>=20
> =3D=3D=3D HARDWARE SETUP =3D=3D=3D
>=20
> My card is a WinTV PVR 150 PAL-B/G 26034 REV C197. I've a high res
> photo at http://jetzweb.de/ina/pict4976.jpg if that is any help.
>=20
>=20
> =3D=3D=3D SYSLOG =3D=3D=3D
>=20
> Mar 30 11:48:08 [kernel] ivtv: Removing Card #0.
> Mar 30 11:48:09 [kernel] ivtv: Removed WinTV PVR 150, card #0
> Mar 30 11:48:09 [kernel] tuner: Ignoring new-style parameters in presence=
 of obsolete ones
> Mar 30 11:48:09 [kernel] wm8775: Init
> Mar 30 11:48:09 [kernel] ivtv: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D START INIT IVTV =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D
> Mar 30 11:48:09 [kernel] ivtv: version 0.3.2 (p) loading
> Mar 30 11:48:09 [kernel] ivtv: Linux version: 2.6.11-gentoo-r4 preempt K7=
 gcc-3.4
> Mar 30 11:48:09 [kernel] ivtv: In case of problems please include the deb=
ug info
> Mar 30 11:48:09 [kernel] ivtv: between the START INIT IVTV and END INIT I=
VTV lines when
> Mar 30 11:48:09 [kernel] ivtv: mailing the ivtv-devel mailinglist.
> Mar 30 11:48:09 [kernel] ivtv: Autodetected WinTV PVR 150 card
> Mar 30 11:48:09 [kernel] ivtv: Found an iTVC16 based chip
> Mar 30 11:48:09 [kernel] ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 3 (le=
vel, low) -> IRQ 3
> Mar 30 11:48:09 [kernel] ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
> Mar 30 11:48:09 [kernel] ivtv: i2c attach [client=3Dtveeprom,ok]
> Mar 30 11:48:14 [kernel] cx25840: FW image '/lib/modules/HcwMakoA.ROM' of=
 size 13883 loaded.
> Mar 30 11:48:14 [kernel] cx25840: FW image md5 digest: a6f6a90a3be338cdb8=
9d59e835798408
> Mar 30 11:48:14 [kernel] cx25840: FW image sha1 digest: ad2872fb98ad43b6c=
4afa45d239a57010edebe84
> Mar 30 11:48:14 [kernel] ivtv: i2c attach [client=3Dcx25840[0],ok]
> Mar 30 11:48:14 [kernel] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c =
driver #0
> Mar 30 11:48:14 [kernel] ivtv: i2c attach [client=3D(tuner unset),ok]
> Mar 30 11:48:14 [kernel] wm8775: starting probe for adapter ivtv i2c driv=
er #0 (0x10005)
> Mar 30 11:48:14 [kernel] wm8775: detecting client on address 0x36
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[0]=3D2e00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[1]=3D0e00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[2]=3D1600
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[3]=3D1800
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[4]=3D1a00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[5]=3D1c00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[6]=3D1e00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[7]=3D2000
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[8]=3D2200
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[9]=3D2400
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[10]=3D2600
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[11]=3D2800
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[12]=3D2a00
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R23]=3D2e01 added Reset wit=
h default 1
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R7]=3D0e00 added TOD with d=
efault 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=3D1600 added ADCHPD wi=
th default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=3D1600 added ADCMCLK w=
ith default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=3D1620 added ADCWL wit=
h default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=3D1620 added ADCBCP wi=
th default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=3D1620 added ADCLRP wi=
th default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=3D1622 added ADCFMT wi=
th default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=3D1800 added ADCMS wit=
h default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=3D1800 added ADCOSR wi=
th default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=3D1802 added ADCRATE w=
ith default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=3D1a00 added AINPD wit=
h default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=3D1a00 added ADCPD wit=
h default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=3D1a00 added PWDN with=
 default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R14]=3D1c00 added ZCLA with=
 default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R14]=3D1ccf added LAG with =
default 207
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R15]=3D1e00 added ZCRA with=
 default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R15]=3D1ecf added RAG with =
default 207
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=3D2000 added LCSEL wit=
h default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=3D2070 added MAXGAIN w=
ith default 7
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=3D207b added LCT with =
default 11
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=3D2200 added LCEN with=
 default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=3D2200 added ALCZC wit=
h default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=3D2200 added HLD with =
default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R18]=3D2430 added DCY with =
default 3
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R18]=3D2432 added ATK with =
default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R19]=3D2600 added NGTH with=
 default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R19]=3D2600 added NGAT with=
 default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R20]=3D2820 added TRANWIN w=
ith default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R20]=3D2826 added MAXATTEN =
with default 6
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=3D2a00 added LRBOTH wi=
th default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=3D2a00 added MUTELA wi=
th default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=3D2a00 added MUTERA wi=
th default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=3D2a01 added AMX with =
default 1
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[0]=3D2e01
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[1]=3D0e00
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[2]=3D1622
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[3]=3D1802
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[4]=3D1a00
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[5]=3D1ccf
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[6]=3D1ecf
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[7]=3D207b
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[8]=3D2200
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[9]=3D2432
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[10]=3D2600
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[11]=3D2826
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[12]=3D2a01
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[0]=3D2e00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[1]=3D0e00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[2]=3D1600
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[3]=3D1800
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[4]=3D1a00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[5]=3D1c00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[6]=3D1e00
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[7]=3D2000
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[8]=3D2200
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[9]=3D2400
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[10]=3D2600
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[11]=3D2800
> Mar 30 11:48:14 [kernel] wm8775: Offset reset.reg[12]=3D2a00
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R23]=3D2e01 added Reset wit=
h default 1
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R7]=3D0e00 added TOD with d=
efault 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=3D1600 added ADCHPD wi=
th default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=3D1600 added ADCMCLK w=
ith default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=3D1620 added ADCWL wit=
h default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=3D1620 added ADCBCP wi=
th default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=3D1620 added ADCLRP wi=
th default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R11]=3D1622 added ADCFMT wi=
th default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=3D1800 added ADCMS wit=
h default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=3D1800 added ADCOSR wi=
th default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R12]=3D1802 added ADCRATE w=
ith default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=3D1a00 added AINPD wit=
h default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=3D1a00 added ADCPD wit=
h default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R13]=3D1a00 added PWDN with=
 default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R14]=3D1c00 added ZCLA with=
 default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R14]=3D1ccf added LAG with =
default 207
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R15]=3D1e00 added ZCRA with=
 default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R15]=3D1ecf added RAG with =
default 207
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=3D2000 added LCSEL wit=
h default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=3D2070 added MAXGAIN w=
ith default 7
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R16]=3D207b added LCT with =
default 11
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=3D2200 added LCEN with=
 default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=3D2200 added ALCZC wit=
h default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R17]=3D2200 added HLD with =
default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R18]=3D2430 added DCY with =
default 3
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R18]=3D2432 added ATK with =
default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R19]=3D2600 added NGTH with=
 default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R19]=3D2600 added NGAT with=
 default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R20]=3D2820 added TRANWIN w=
ith default 2
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R20]=3D2826 added MAXATTEN =
with default 6
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=3D2a00 added LRBOTH wi=
th default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=3D2a00 added MUTELA wi=
th default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=3D2a00 added MUTERA wi=
th default 0
> Mar 30 11:48:14 [kernel] wm8775: Updating reg[R21]=3D2a01 added AMX with =
default 1
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[0]=3D2e01
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[1]=3D0e00
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[2]=3D1622
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[3]=3D1802
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[4]=3D1a00
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[5]=3D1ccf
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[6]=3D1ecf
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[7]=3D207b
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[8]=3D2200
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[9]=3D2432
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[10]=3D2600
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[11]=3D2826
> Mar 30 11:48:14 [kernel] wm8775: Final reset.reg[12]=3D2a01
> Mar 30 11:48:14 [kernel] wm8775: Setting register ADCFMT (7) to 1, R11.0.=
=2E1, old value 02
> Mar 30 11:48:14 [kernel] wm8775: Setting register ADCMS (8) to 1, R12.8..=
8, old value 00
> Mar 30 11:48:14 [kernel] wm8775: Setting register DCY (24) to 8, R18.4..7=
, old value 03
> Mar 30 11:48:14 [kernel] wm8775: Setting register NGAT (27) to 1, R19.0..=
0, old value 00
> Mar 30 11:48:14 [kernel] wm8775: Setting register LRBOTH (30) to 1, R21.8=
=2E.8, old value 00
> Mar 30 11:48:14 [kernel] wm8775: Setting register AMX (33) to 15, R21.0..=
3, old value 01
> Mar 30 11:48:14 [kernel] wm8775: Updating register 0 (R23), config: 2e01 =
active: 2e00.
> Mar 30 11:48:14 [kernel] wm8775: Skipping register 1 (R7), config: 0e00 a=
ctive: 0e00.
> Mar 30 11:48:14 [kernel] wm8775: Updating register 2 (R11), config: 1622 =
active: 1621.
> Mar 30 11:48:14 [kernel] wm8775: Updating register 3 (R12), config: 1802 =
active: 1902.
> Mar 30 11:48:14 [kernel] wm8775: Skipping register 4 (R13), config: 1a00 =
active: 1a00.
> Mar 30 11:48:14 [kernel] wm8775: Skipping register 5 (R14), config: 1ccf =
active: 1ccf.
> Mar 30 11:48:14 [kernel] wm8775: Skipping register 6 (R15), config: 1ecf =
active: 1ecf.
> Mar 30 11:48:14 [kernel] wm8775: Skipping register 7 (R16), config: 207b =
active: 207b.
> Mar 30 11:48:14 [kernel] wm8775: Skipping register 8 (R17), config: 2200 =
active: 2200.
> Mar 30 11:48:14 [kernel] wm8775: Updating register 9 (R18), config: 2432 =
active: 2482.
> Mar 30 11:48:14 [kernel] wm8775: Updating register 10 (R19), config: 2600=
 active: 2601.
> Mar 30 11:48:14 [kernel] wm8775: Skipping register 11 (R20), config: 2826=
 active: 2826.
> Mar 30 11:48:14 [kernel] wm8775: Updating register 12 (R21), config: 2a01=
 active: 2b0f.
> Mar 30 11:48:14 [kernel] ivtv: i2c attach [client=3Dwm8775[0],ok]
> Mar 30 11:48:14 [kernel] tveeprom: Hauppauge: model =3D 26034, rev =3D C1=
97, serial# =3D 7765471
> Mar 30 11:48:14 [kernel] tveeprom: tuner =3D <unknown> (idx =3D 97, type =
=3D 65543)
> Mar 30 11:48:14 [kernel] tveeprom: tuner fmt =3D PAL(D/K) (eeprom =3D 0x4=
4, v4l2 =3D 0x00000e07)
> Mar 30 11:48:14 [kernel] tveeprom: audio_processor =3D MSP3400C (type =3D=
 4)
> Mar 30 11:48:14 [kernel] ivtv: Tuner Type 65543, Tuner formats 0x00000e07=
, Radio: yes, Model 0x008d1657, Revision 0xe28c64b8
> Mar 30 11:48:14 [kernel] ivtv: PAL tuner detected
> Mar 30 11:48:14 [kernel] ivtv: Radio detected
> Mar 30 11:48:15 [kernel] ivtv: Encoder revision: 0x02040024
> Mar 30 11:48:15 [kernel] ivtv: Encoder Firmware may be buggy, use version=
 0x02040011
> Mar 30 11:48:15 [kernel] ivtv: Configuring WinTV PVR 150 card with 5 stre=
ams
> Mar 30 11:48:15 [kernel] ivtv: Registered v4l2 device, streamtype 0 minor=
 0
> Mar 30 11:48:15 [kernel] ivtv: Create DMA stream 0 using 1024 16384 byte =
buffers  0 kbytes total
> Mar 30 11:48:15 [kernel] ivtv: Allocate DMA stream 0 using 1024 16384 byt=
e buffers  16777216 kbytes total
> Mar 30 11:48:15 [kernel] ivtv: Registered v4l2 device, streamtype 1 minor=
 32
> Mar 30 11:48:15 [kernel] ivtv: Create DMA stream 1
> Mar 30 11:48:15 [kernel] ivtv: Allocate DMA stream 1
> Mar 30 11:48:15 [kernel] ivtv: Registered v4l2 device, streamtype 2 minor=
 224
> Mar 30 11:48:15 [kernel] ivtv: Create stream 2 using 40 52224 byte buffer=
s  0 kbytes total
> Mar 30 11:48:15 [kernel] ivtv: Allocate stream 2 using 40 52224 byte buff=
ers  2097152 kbytes total
> Mar 30 11:48:15 [kernel] ivtv: Registered v4l2 device, streamtype 3 minor=
 24
> Mar 30 11:48:15 [kernel] ivtv: Create DMA stream 3 using 455 4608 byte bu=
ffers  0 kbytes total
> Mar 30 11:48:15 [kernel] ivtv: Allocate DMA stream 3 using 455 4608 byte =
buffers  2097152 kbytes total
> Mar 30 11:48:15 [kernel] ivtv: Registered v4l2 device, streamtype 4 minor=
 64
> Mar 30 11:48:15 [kernel] ivtv: Create stream 4
> Mar 30 11:48:15 [kernel] ivtv: Allocate stream 4
> Mar 30 11:48:15 [kernel] ivtv: Setting Tuner 65543
> Mar 30 11:48:15 [kernel] ivtv: ivtv_enc_thread: pid =3D 14857, itv =3D 0x=
e28bb3a0
> Mar 30 11:48:15 [kernel] ivtv: Switching standard to PAL.
> Mar 30 11:48:15 [kernel] ivtv: Initialized WinTV PVR 150, card #0
> Mar 30 11:48:15 [kernel] ivtv: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D  END INIT IVTV  =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D
> Mar 30 11:48:17 [fetchmail] Authorization failure on gentry@... (=
previously authorized)_
> Mar 30 11:48:17 [fetchmail] Query status=3D3 (AUTHFAIL)_
> Mar 30 11:48:26 [fetchmail] sleeping at Wed Mar 30 11:48:26 2005_
> Mar 30 11:48:35 [kernel] tuner: tv freq set to 343.25
> Mar 30 11:48:35 [kernel] tuner: tuner type not set
> Mar 30 11:48:40 [kernel] tuner: tv freq set to 399.25
> Mar 30 11:48:40 [kernel] tuner: tuner type not set
>=20
>=20
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick
> _______________________________________________
> ivtv-devel mailing list
> ivtv-devel@...
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>=20
>=20


Look's like there is another unknown tuner Module missing.
The real Tunername is written on a sticker under the big Hauppauge sticker.
If you carefully peel the Sticker off, you could read the real Tunername.=20
With the modprobe ivtv line you set the tuner to "TCL_2002N" -> see tuner.h=
/c for complete list of currently know tuner's.
the configuration of this Tuner:
 {"TCL 2002N", TCL, NTSC,
  16 * 172.00, 16 * 448.00, 0x01, 0x02, 0x08, 0x8e, 732},

=46rom the v4l2 =3D 0x00000e07 I see you have a PAL (B/G) (D/K) Tuner so th=
ere is certainly something
wrong .=20

Regards Marcel

[ivtv-devel] Myth crashes after updating installing p drivers

From: James J Hayes III <JJHayesIII@ho...> - 2005-03-30 06:46

Just updated to latest ivtv drivers, and then updated my nvidia drivers, and
now myth crashes in the frontend and the setup

During setup, it freezes on the video sources section

Running the frontend, it freezes after the images are scaled...

There aren't any errors on the console, and things were working fine
before....

Any ideas?

Re: [ivtv-devel] Myth crashes after updating installing p drivers

From: David <myth@dg...> - 2005-03-30 10:36

James J Hayes III wrote:

>Just updated to latest ivtv drivers, and then updated my nvidia drivers, and
>now myth crashes in the frontend and the setup
>
>During setup, it freezes on the video sources section
>
>Running the frontend, it freezes after the images are scaled...
>
>There aren't any errors on the console, and things were working fine
>before....
>
>Any ideas?
>
>  
>
revert the nvidia driver

David

RE: [ivtv-devel] blocky picture with PVR150MCE

From: Rick Stewart <rick.stewart@pa...> - 2005-03-30 10:08

Yes, this is the best I can get from my PVR150MCE but only using the
composite input. The tuner input gives nothing but static.

I'm also using the 0.3.2p driver in a PAL country (New Zealand).

Sorry I can't be more helpful...

Cheers,

Rick

> -----Original Message-----
> From: ivtv-devel-admin@... 
> [mailto:ivtv-devel-admin@...] On Behalf Of 
> Peter Greis
> Sent: Wednesday, 30 March 2005 8:40 p.m.
> To: ivtv-devel@...
> Subject: [ivtv-devel] blocky picture with PVR150MCE
> 
> Hi All,
> 
> Working step by step to get my PVR150 working. As Marcel 
> noticed, here in Switzerland the card starts as PAL D/K, 
> which we have addressed by putting options tuner PAL=G in the 
> modprobe.conf (it needs to be PAL B/G)).
> 
> So now I get something that I can tune to, but the picture is 
> very blocky (like chunky pixels). Has anyone seen this 
> (0.3.2.p) ? Any ideas ?
> 
> regards,
> 
> -Peter
> 
> Peter Greis
> Zurich Switzerland
> +++ Be careful replying... the real address is 
> +++ "peter_greis[at]yahoo[dot]com" +++
> 
> 
> 		
> __________________________________
> Do you Yahoo!? 
> Yahoo! Small Business - Try our new resources site!
> http://smallbusiness.yahoo.com/resources/ 
> 
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from 
> real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> ivtv-devel mailing list
> ivtv-devel@...
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>

[ivtv-devel] blocky picture with PVR150MCE

From: Peter Greis <peter_greis@ya...> - 2005-03-30 08:40

Hi All,

Working step by step to get my PVR150 working. As
Marcel noticed, here in Switzerland the card starts as
PAL D/K, which we have addressed by putting options
tuner PAL=G in the modprobe.conf (it needs to be PAL
B/G)).

So now I get something that I can tune to, but the
picture is very blocky (like chunky pixels). Has
anyone seen this (0.3.2.p) ? Any ideas ?

regards,

-Peter

Peter Greis
Zurich Switzerland
+++ Be careful replying... the real address is "peter_greis[at]yahoo[dot]com" +++


		
__________________________________ 
Do you Yahoo!? 
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/

Re: [ivtv-devel] south park and vonage commercials, mpeg artifacts

From: Maverick <mavantix@gm...> - 2005-03-30 04:41

> Also, on the Vonage commercial (with that goofy kill bill 1 song in it
> whatever the real name is and the orange background) between 2% and 5% of

Whoa, at least get the band right... ;) It's "Woo Hoo" by the
5.6.7.8's, an all girl band from Japan. Leave it up to Quentin
Tarantino to use some weird songs.. hehe.

Your probably getting the artifacts because of the signal or the
text/color differences. It could be 'line curl' from your TV's
input/cables/myth box output too.

My Sony 65" Projection's "ClearEdge" technology makes mpeg look like
crap, disable that and it doesn't try and "correct" the edges and
*cough* surprisingly, the picture looks almost perfect. Well, as good
as 480x480 gets at 65" 16:9...

I agree, use commercial auto skip at the problem goes away... It's
also been know to save you tons on car insurance.

-Kenneth