Linux on the Nintendo GameCube and Wii

Update of /cvsroot/gc-linux/linux/arch/powerpc/platforms/embedded6xx
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv28930/arch/powerpc/platforms/embedded6xx

Modified Files:
	usbgecko_udbg.c wii.c 
Log Message:
Apply:
gc-linux+fix_cputable-2.6.27.patch
gcnfb+fix_mmap-2.6.27.patch
usbgecko_udbg+safeness.patch
rvl-sthcd+workaround_7005.patch


Index: usbgecko_udbg.c
===================================================================
RCS file: /cvsroot/gc-linux/linux/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -d -r1.3 -r1.4
--- usbgecko_udbg.c	15 Nov 2008 20:10:14 -0000	1.3
+++ usbgecko_udbg.c	25 Nov 2008 19:09:31 -0000	1.4
@@ -37,6 +37,9 @@
 
 #define EXI_DATA                0x10
 
+#define UG_READ_ATTEMPTS	100
+#define UG_WRITE_ATTEMPTS	100
+
 
 static void __iomem *ug_io_base;
 
@@ -106,7 +109,7 @@
  */
 static void ug_putc(char ch)
 {
-	int count = 16;
+	int count = UG_WRITE_ATTEMPTS;
 
 	if (!ug_io_base)
 		return;
@@ -158,7 +161,7 @@
  */
 static int ug_getc(void)
 {
-	int count = 16;
+	int count = UG_READ_ATTEMPTS;
 
 	if (!ug_io_base)
 		return -1;
@@ -214,10 +217,12 @@
 	reg = of_get_property(np, "reg", NULL);
 	if (reg) {
 		paddr = of_translate_address(np, reg);
-		if (paddr)
+		if (paddr) {
 			ug_io_base = ioremap(paddr, reg[1]);
+			return ug_io_base;
+		}
 	}
-	return ug_io_base;
+	return NULL;
 }
 
 /*
@@ -225,19 +230,30 @@
  */
 void __init ug_udbg_init(void)
 {
-	struct device_node *np;
+	struct device_node *np = NULL;
 	struct device_node *stdout;
 	const char *path;
 
-	ug_io_base = NULL;
+	if (ug_io_base)
+		udbg_printf("%s: early -> final\n", __func__);
+
+	if (!of_chosen) {
+		udbg_printf("%s: missing of_chosen\n", __func__);
+		goto done;
+	}
 
 	path = of_get_property(of_chosen, "linux,stdout-path", NULL);
-	if (!path)
-		return;
+	if (!path) {
+		udbg_printf("%s: missing %s property", __func__,
+			    "linux,stdout-path");
+		goto done;
+	}
 
 	stdout = of_find_node_by_path(path);
-	if (!stdout)
-		return;
+	if (!stdout) {
+		udbg_printf("%s: missing path %s", __func__, path);
+		goto done;
+	}
 
 	for(np = NULL;
 	    (np = of_find_compatible_node(np, NULL, "usbgecko,usbgecko")); )
@@ -245,18 +261,30 @@
 			break;
 
 	of_node_put(stdout);
-	if (!np)
-		return;
+	if (!np) {
+		udbg_printf("%s: stdout is not an usbgecko", __func__);
+		goto done;
+	}
 
-	ug_udbg_setup_io_base(np);
-	if (ug_is_adapter_present()) {
+	if (!ug_udbg_setup_io_base(np)) {
+		udbg_printf("%s: failed to setup io base", __func__);
+		goto done;
+	}
+
+	if (!ug_is_adapter_present()) {
+		udbg_printf("usbgecko_udbg: not found\n");
+		ug_io_base = NULL;
+	} else {
 		udbg_putc = ug_udbg_putc;
 		udbg_getc = ug_udbg_getc;
 		udbg_getc_poll = ug_udbg_getc_poll;
-		printk(KERN_INFO "usbgecko_udbg: ready\n");
+		udbg_printf("usbgecko_udbg: ready\n");
 	}
 
-	of_node_put(np);
+done:
+	if (np)
+		of_node_put(np);
+	return;
 }
 
 #ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO

Index: wii.c
===================================================================
RCS file: /cvsroot/gc-linux/linux/arch/powerpc/platforms/embedded6xx/wii.c,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -d -r1.2 -r1.3
--- wii.c	15 Nov 2008 20:10:14 -0000	1.2
+++ wii.c	25 Nov 2008 19:09:31 -0000	1.3
@@ -59,14 +59,14 @@
 	seq_printf(m, "machine\t\t: Nintendo Wii\n");
 }
 
-static void wii_setup_arch(void)
+static void __init wii_setup_arch(void)
 {
+	ug_udbg_init();
+	gcnvi_udbg_init();
 }
 
 static void __init wii_init_early(void)
 {
-	ug_udbg_init();
-	gcnvi_udbg_init();
 }
 
 static int __init wii_probe(void)

Update of /cvsroot/gc-linux/linux/arch/powerpc/kernel
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv28930/arch/powerpc/kernel

Modified Files:
	cputable.c 
Log Message:
Apply:
gc-linux+fix_cputable-2.6.27.patch
gcnfb+fix_mmap-2.6.27.patch
usbgecko_udbg+safeness.patch
rvl-sthcd+workaround_7005.patch


Index: cputable.c
===================================================================
RCS file: /cvsroot/gc-linux/linux/arch/powerpc/kernel/cputable.c,v
retrieving revision 1.4
retrieving revision 1.5
diff -u -d -r1.4 -r1.5
--- cputable.c	15 Nov 2008 20:10:14 -0000	1.4
+++ cputable.c	25 Nov 2008 19:09:31 -0000	1.5
@@ -640,11 +640,11 @@
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
 	},
-	{	/* 750CL "Broadway" (87200) */
-		.pvr_mask		= 0xffffffff,
-		.pvr_value		= 0x00087200,
-		.cpu_name		= "750CL",
-		.cpu_features		= CPU_FTRS_750CL,
+	{	/* 745/755 */
+		.pvr_mask		= 0xfffff000,
+		.pvr_value		= 0x00083000,
+		.cpu_name		= "745/755",
+		.cpu_features		= CPU_FTRS_750,
 		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
@@ -653,9 +653,9 @@
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
 	},
-	{	/* 750CL */
-		.pvr_mask		= 0xfffff0f0,
-		.pvr_value		= 0x00087010,
+	{	/* 750CL (and "Broadway") */
+		.pvr_mask		= 0xfffff000,
+		.pvr_value		= 0x00087000,
 		.cpu_name		= "750CL",
 		.cpu_features		= CPU_FTRS_750CL,
 		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
@@ -666,19 +666,6 @@
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
 	},
-	{	/* 745/755 */
-		.pvr_mask		= 0xfffff000,
-		.pvr_value		= 0x00083000,
-		.cpu_name		= "745/755",
-		.cpu_features		= CPU_FTRS_750,
-		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
-		.icache_bsize		= 32,
-		.dcache_bsize		= 32,
-		.num_pmcs		= 4,
-		.cpu_setup		= __setup_cpu_750,
-		.machine_check		= machine_check_generic,
-		.platform		= "ppc750",
-	},
 	{	/* 750FX rev 1.x */
 		.pvr_mask		= 0xffffff00,
 		.pvr_value		= 0x70000100,

Update of /cvsroot/gc-linux/linux/drivers/video
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv28930/drivers/video

Modified Files:
	gcnfb.c 
Log Message:
Apply:
gc-linux+fix_cputable-2.6.27.patch
gcnfb+fix_mmap-2.6.27.patch
usbgecko_udbg+safeness.patch
rvl-sthcd+workaround_7005.patch


Index: gcnfb.c
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/video/gcnfb.c,v
retrieving revision 1.20
retrieving revision 1.21
diff -u -d -r1.20 -r1.21
--- gcnfb.c	14 Sep 2008 19:20:31 -0000	1.20
+++ gcnfb.c	25 Nov 2008 19:09:31 -0000	1.21
@@ -713,16 +713,45 @@
 	return 0;
 }
 
+static int vifb_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+        unsigned long off;
+        unsigned long start;
+        u32 len;
+
+	off = vma->vm_pgoff << PAGE_SHIFT;
+
+        /* frame buffer memory */
+        start = info->fix.smem_start;
+        len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.smem_len);
+        start &= PAGE_MASK;
+        if ((vma->vm_end - vma->vm_start + off) > len)
+                return -EINVAL;
+        off += start;
+        vma->vm_pgoff = off >> PAGE_SHIFT;
+
+        /* this is an IO map, tell maydump to skip this VMA */
+        vma->vm_flags |= VM_IO | VM_RESERVED;
+
+	/* we share RAM between the cpu and the video hardware */
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+        if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
+                               vma->vm_end - vma->vm_start,
+			       vma->vm_page_prot))
+                return -EAGAIN;
+        return 0;
+}
+
+
 struct fb_ops vifb_ops = {
 	.owner = THIS_MODULE,
 	.fb_setcolreg = vifb_setcolreg,
 	.fb_pan_display = vifb_pan_display,
 	.fb_ioctl = vifb_ioctl,
-#ifdef CONFIG_FB_GAMECUBE_GX
-	.fb_mmap = gcngx_mmap,
-#endif
-	.fb_check_var = vifb_check_var,
 	.fb_set_par = vifb_set_par,
+	.fb_check_var = vifb_check_var,
+	.fb_mmap = vifb_mmap,
 	.fb_fillrect = cfb_fillrect,
 	.fb_copyarea = cfb_copyarea,
 	.fb_imageblit = cfb_imageblit,
@@ -857,6 +886,8 @@
 
 	dev_set_drvdata(dev, info);
 
+	vi_enable_interrupts(ctl, 0);
+
 	err = request_irq(ctl->irq, vi_irq_handler, 0, DRV_MODULE_NAME, dev);
 	if (err) {
 		drv_printk(KERN_ERR, "unable to register IRQ %u\n", ctl->irq);

Update of /cvsroot/gc-linux/linux/arch/powerpc/boot/dts
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv28930/arch/powerpc/boot/dts

Modified Files:
	wii.dts 
Log Message:
Apply:
gc-linux+fix_cputable-2.6.27.patch
gcnfb+fix_mmap-2.6.27.patch
usbgecko_udbg+safeness.patch
rvl-sthcd+workaround_7005.patch


Index: wii.dts
===================================================================
RCS file: /cvsroot/gc-linux/linux/arch/powerpc/boot/dts/wii.dts,v
retrieving revision 1.9
retrieving revision 1.10
diff -u -d -r1.9 -r1.10
--- wii.dts	15 Nov 2008 20:10:14 -0000	1.9
+++ wii.dts	25 Nov 2008 19:09:31 -0000	1.10
@@ -102,7 +102,7 @@
 			interrupts = <08>;
 			interrupt-parent = <&pic>;
 			xfb-start = <01698000>; /* end-of-mem1 - xfb-size */
-			xfb-size = <168000>;
+			xfb-size = <168000>;	/* 640x576x2 x 2 bytes */
 		};
 
 		resetswitch@... {

Update of /cvsroot/gc-linux/linux/drivers/usb/host
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv28930/drivers/usb/host

Modified Files:
	rvl-sthcd.c 
Log Message:
Apply:
gc-linux+fix_cputable-2.6.27.patch
gcnfb+fix_mmap-2.6.27.patch
usbgecko_udbg+safeness.patch
rvl-sthcd+workaround_7005.patch


Index: rvl-sthcd.c
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/usb/host/rvl-sthcd.c,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -d -r1.3 -r1.4
--- rvl-sthcd.c	15 Nov 2008 20:10:15 -0000	1.3
+++ rvl-sthcd.c	25 Nov 2008 19:09:31 -0000	1.4
@@ -78,7 +78,7 @@
 #define STHCD_MAX_CHUNK_SIZE	(2048)
 
 #define STHCD_PORT_MAX_RESETS	2	/* maximum number of consecutive
-					 * allowed for a port */
+					 * resets allowed for a port */
 #define STHCD_RESCAN_INTERVAL	5	/* seconds */
 
 #define starlet_ioh_sg_entry(sg, ptr) \
@@ -1064,7 +1064,7 @@
 		status = xfer_len;
 		xfer_len = 0;
 
-		if (status != -7004 && status != -7003) {
+		if (status != -7004 && status != -7003 && status != -7005) {
 			drv_printk(KERN_ERR, "request completed"
 				   " with error %d\n", status);
 			sthcd_pep_print(pep);
@@ -1077,8 +1077,8 @@
 			status = -EPIPE;
 			break;
 		case -7005:
-			/* endpoint shutdown? */
-			status = -ESHUTDOWN;
+			/* nak? */
+			status = -ECONNRESET;
 			break;
 		case -7008:
 		case -7022:
@@ -1768,6 +1768,7 @@
 	char pathname[32];
 	struct usb_device_descriptor *descriptor;
 	int fd;
+	int i;
 	int retval;
 
 	descriptor = starlet_ioh_kzalloc(USB_DT_DEVICE_SIZE);
@@ -1785,11 +1786,19 @@
 		goto done;
 	}
 	fd = retval;
-	retval = sthcd_usb_control_msg(fd, USB_REQ_GET_DESCRIPTOR,
-				      USB_DIR_IN,
-				      USB_DT_DEVICE << 8, 0,
-				      descriptor, USB_DT_DEVICE_SIZE,
-				      0);
+
+	for (i=0; i < 3; i++) {
+		retval = sthcd_usb_control_msg(fd, USB_REQ_GET_DESCRIPTOR,
+					      USB_DIR_IN,
+					      USB_DT_DEVICE << 8, 0,
+					      descriptor, USB_DT_DEVICE_SIZE,
+					      0);
+		if (retval != -7005)
+			break;
+		DBG("%s: attempt %d, retval=%d (%x)\n", __func__,
+		    i, retval, retval);
+	}
+
 	starlet_close(fd);
 
 	if (retval >= USB_DT_DEVICE_SIZE) {

Update of /cvsroot/gc-linux/linux/include/asm-ppc
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv24961

Removed Files:
	io.h ppc6xx.h ppcboot.h 
Log Message:
- merge 2.6.27


--- ppc6xx.h DELETED ---

--- io.h DELETED ---

--- ppcboot.h DELETED ---

Update of /cvsroot/gc-linux/linux/include/asm-powerpc
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv24903

Removed Files:
	starlet.h udbg.h 
Log Message:
- merge 2.6.27


--- starlet.h DELETED ---

--- udbg.h DELETED ---

Update of /cvsroot/gc-linux/linux/arch/powerpc/platforms
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/arch/powerpc/platforms

Modified Files:
	Kconfig.cputype 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


Index: Kconfig.cputype
===================================================================
RCS file: /cvsroot/gc-linux/linux/arch/powerpc/platforms/Kconfig.cputype,v
retrieving revision 1.4
retrieving revision 1.5
diff -u -d -r1.4 -r1.5
--- Kconfig.cputype	14 Sep 2008 19:20:27 -0000	1.4
+++ Kconfig.cputype	15 Nov 2008 20:10:14 -0000	1.5
@@ -42,12 +42,14 @@
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
 	select 4xx_SOC
+	select PPC_PCI_CHOICE
 
 config 44x
 	bool "AMCC 44x"
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
 	select 4xx_SOC
+	select PPC_PCI_CHOICE
 
 config E200
 	bool "Freescale e200"
@@ -84,9 +86,6 @@
 	  machines. When building a kernel that is supposed to run only
 	  on Cell, you should also select the POWER4_ONLY option.
 
-config 6xx
-	bool
-
 # this is temp to handle compat with arch=ppc
 config 8xx
 	bool
@@ -95,6 +94,11 @@
 	select FSL_EMB_PERFMON
 	bool
 
+config PPC_E500MC
+	bool "e500mc Support"
+	select PPC_FPU
+	depends on E500
+
 config PPC_FPU
 	bool
 	default y if PPC64
@@ -155,9 +159,25 @@
 
 	  If in doubt, say Y here.
 
+config VSX
+	bool "VSX Support"
+	depends on POWER4 && ALTIVEC && PPC_FPU
+	---help---
+
+	  This option enables kernel support for the Vector Scaler extensions
+	  to the PowerPC processor. The kernel currently supports saving and
+	  restoring VSX registers, and turning on the 'VSX enable' bit so user
+	  processes can execute VSX instructions.
+
+	  This option is only useful if you have a processor that supports
+	  VSX (P7 and above), but does not have any affect on a non-VSX
+	  CPUs (it does, however add code to the kernel).
+
+	  If in doubt, say Y here.
+
 config SPE
 	bool "SPE Support"
-	depends on E200 || E500
+	depends on E200 || (E500 && !PPC_E500MC)
 	default y
 	---help---
 	  This option enables kernel support for the Signal Processing
@@ -182,7 +202,7 @@
 
 config PPC_MM_SLICES
 	bool
-	default y if HUGETLB_PAGE
+	default y if HUGETLB_PAGE || PPC_64K_PAGES
 	default n
 
 config VIRT_CPU_ACCOUNTING

Update of /cvsroot/gc-linux/linux/drivers/net
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/drivers/net

Modified Files:
	Kconfig Makefile 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


Index: Makefile
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/net/Makefile,v
retrieving revision 1.27
retrieving revision 1.28
diff -u -d -r1.27 -r1.28
--- Makefile	14 Sep 2008 19:20:29 -0000	1.27
+++ Makefile	15 Nov 2008 20:10:15 -0000	1.28
@@ -4,7 +4,6 @@
 
 obj-$(CONFIG_E1000) += e1000/
 obj-$(CONFIG_E1000E) += e1000e/
-obj-$(CONFIG_IBM_EMAC) += ibm_emac/
 obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
 obj-$(CONFIG_IGB) += igb/
 obj-$(CONFIG_IXGBE) += ixgbe/
@@ -16,6 +15,7 @@
 obj-$(CONFIG_CAN) += can/
 obj-$(CONFIG_BONDING) += bonding/
 obj-$(CONFIG_ATL1) += atlx/
+obj-$(CONFIG_ATL1E) += atl1e/
 obj-$(CONFIG_GIANFAR) += gianfar_driver.o
 obj-$(CONFIG_TEHUTI) += tehuti.o
 
@@ -67,6 +67,7 @@
 obj-$(CONFIG_TIGON3) += tg3.o
 obj-$(CONFIG_BNX2) += bnx2.o
 obj-$(CONFIG_BNX2X) += bnx2x.o
+bnx2x-objs := bnx2x_main.o bnx2x_link.o
 spidernet-y += spider_net.o spider_net_ethtool.o
 obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
 obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
@@ -80,6 +81,7 @@
 obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
 obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
 obj-$(CONFIG_RIONET) += rionet.o
+obj-$(CONFIG_SH_ETH) += sh_eth.o
 
 #
 # end link order section
@@ -105,11 +107,11 @@
 endif
 obj-$(CONFIG_68360_ENET) += 68360enet.o
 obj-$(CONFIG_WD80x3) += wd.o 8390.o
-obj-$(CONFIG_EL2) += 3c503.o 8390.o
-obj-$(CONFIG_NE2000) += ne.o 8390.o
-obj-$(CONFIG_NE2_MCA) += ne2.o 8390.o
-obj-$(CONFIG_HPLAN) += hp.o 8390.o
-obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o
+obj-$(CONFIG_EL2) += 3c503.o 8390p.o
+obj-$(CONFIG_NE2000) += ne.o 8390p.o
+obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o
+obj-$(CONFIG_HPLAN) += hp.o 8390p.o
+obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
 obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
 obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
 obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
@@ -165,7 +167,6 @@
 obj-$(CONFIG_8139CP) += 8139cp.o
 obj-$(CONFIG_8139TOO) += 8139too.o
 obj-$(CONFIG_ZNET) += znet.o
-obj-$(CONFIG_LAN_SAA9730) += saa9730.o
 obj-$(CONFIG_CPMAC) += cpmac.o
 obj-$(CONFIG_DEPCA) += depca.o
 obj-$(CONFIG_EWRK3) += ewrk3.o
@@ -217,7 +218,6 @@
 obj-$(CONFIG_SMC911X) += smc911x.o
 obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
 obj-$(CONFIG_DM9000) += dm9000.o
-obj-$(CONFIG_FEC_8XX) += fec_8xx/
 obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o
 pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
 obj-$(CONFIG_MLX4_CORE) += mlx4/
@@ -237,6 +237,7 @@
 obj-$(CONFIG_USB_KAWETH)        += usb/
 obj-$(CONFIG_USB_PEGASUS)       += usb/
 obj-$(CONFIG_USB_RTL8150)       += usb/
+obj-$(CONFIG_USB_HSO)		+= usb/
 obj-$(CONFIG_USB_USBNET)        += usb/
 obj-$(CONFIG_USB_ZD1201)        += usb/
 

Index: Kconfig
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/net/Kconfig,v
retrieving revision 1.33
retrieving revision 1.34
diff -u -d -r1.33 -r1.34
--- Kconfig	14 Sep 2008 19:20:29 -0000	1.33
+++ Kconfig	15 Nov 2008 20:10:15 -0000	1.34
@@ -26,14 +26,6 @@
 # that for each of the symbols.
 if NETDEVICES
 
-config NETDEVICES_MULTIQUEUE
-	bool "Netdevice multiple hardware queue support"
-	---help---
-	  Say Y here if you want to allow the network stack to use multiple
-	  hardware TX queues on an ethernet device.
-
-	  Most people will say N here.
-
 config IFB
 	tristate "Intermediate Functional Block support"
 	depends on NET_CLS_ACT
@@ -217,7 +209,7 @@
 
 config MACB
 	tristate "Atmel MACB support"
-	depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9
+	depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91CAP9
 	select PHYLIB
 	help
 	  The Atmel MACB ethernet interface is found on many AT32 and AT91
@@ -342,15 +334,6 @@
 	  To compile this driver as a module, choose M here: the module
 	  will be called apne.
 
-config APOLLO_ELPLUS
-	tristate "Apollo 3c505 support"
-	depends on APOLLO
-	help
-	  Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
-	  If you don't have one made for Apollos, you can use one from a PC,
-	  except that your Apollo won't be able to boot from it (because the
-	  code in the ROM will be for a PC).
-
 config MAC8390
 	bool "Macintosh NS 8390 based ethernet cards"
 	depends on MAC
@@ -533,6 +516,19 @@
 
 	  If unsure, say N.
 
+config SH_ETH
+	tristate "Renesas SuperH Ethernet support"
+	depends on SUPERH && \
+		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763 || \
+		 CPU_SUBTYPE_SH7619)
+	select CRC32
+	select MII
+	select MDIO_BITBANG
+	select PHYLIB
+	help
+	  Renesas SuperH Ethernet device driver.
+	  This driver support SH7710, SH7712, SH7763 and SH7619.
+
 config SUNLANCE
 	tristate "Sun LANCE support"
 	depends on SBUS
@@ -835,14 +831,14 @@
 	  will be called smc-ultra32.
 
 config BFIN_MAC
-	tristate "Blackfin 527/536/537 on-chip mac support"
-	depends on NET_ETHERNET && (BF527 || BF537 || BF536)
+	tristate "Blackfin on-chip MAC support"
+	depends on NET_ETHERNET && (BF526 || BF527 || BF536 || BF537)
 	select CRC32
 	select MII
 	select PHYLIB
 	select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
 	help
-	  This is the driver for blackfin on-chip mac device. Say Y if you want it
+	  This is the driver for Blackfin on-chip mac device. Say Y if you want it
 	  compiled into the kernel. This driver is also available as a module
 	  ( = code which can be inserted in and removed from the running kernel
 	  whenever you want). The module will be called bfin_mac.
@@ -935,6 +931,23 @@
 	  To compile this driver as a module, choose M here.  The module
 	  will be called dm9000.
 
+config DM9000_DEBUGLEVEL
+	int "DM9000 maximum debug level"
+	depends on DM9000
+	default 4
+	help
+	  The maximum level of debugging code compiled into the DM9000
+	  driver.
+
+config DM9000_FORCE_SIMPLE_PHY_POLL
+	bool "Force simple NSR based PHY polling"
+	depends on DM9000
+	---help---
+	  This configuration forces the DM9000 to use the NSR's LinkStatus
+	  bit to determine if the link is up or down instead of the more
+	  costly MII PHY reads. Note, this will not work if the chip is
+	  operating with an external PHY.
+
 config ENC28J60
 	tristate "ENC28J60 support"
 	depends on EXPERIMENTAL && SPI && NET_ETHERNET
@@ -952,19 +965,11 @@
 	  Enable the verify after the buffer write useful for debugging purpose.
 	  If unsure, say N.
 
-config DM9000_DEBUGLEVEL
-	int "DM9000 maximum debug level"
-	depends on DM9000
-	default 4
-	help
-	  The maximum level of debugging code compiled into the DM9000
-	  driver.
-
 config SMC911X
 	tristate "SMSC LAN911[5678] support"
 	select CRC32
 	select MII
-	depends on ARCH_PXA || SH_MAGIC_PANEL_R2
+	depends on ARCH_PXA || SUPERH
 	help
 	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
 	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
@@ -1176,7 +1181,7 @@
 
 config NE2000
 	tristate "NE2000/NE1000 support"
-	depends on NET_ISA || (Q40 && m) || M32R || TOSHIBA_RBTX4927 || TOSHIBA_RBTX4938
+	depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
 	select CRC32
 	---help---
 	  If you have a network (Ethernet) card of this type, say Y and read
@@ -1252,7 +1257,6 @@
 	  To compile this driver as a module, choose M here. The module will
 	  be called ibmveth.
 
-source "drivers/net/ibm_emac/Kconfig"
 source "drivers/net/ibm_newemac/Kconfig"
 
 config NET_PCI
@@ -1295,20 +1299,6 @@
 	  To compile this driver as a module, choose M here. The module
 	  will be called amd8111e.
 
-config AMD8111E_NAPI
-	bool "Use RX polling (NAPI)"
-	depends on AMD8111_ETH
-	help
-	  NAPI is a new driver API designed to reduce CPU and interrupt load
-	  when the driver is receiving lots of packets from the card. It is
-	  still somewhat experimental and thus not yet enabled by default.
-
-	  If your estimated Rx load is 10kpps or more, or if the card will be
-	  deployed on potentially unfriendly networks (e.g. in a firewall),
-	  then say Y here.
-
-	  If in doubt, say N.
-
 config ADAPTEC_STARFIRE
 	tristate "Adaptec Starfire/DuraLAN support"
 	depends on NET_PCI && PCI
@@ -1323,20 +1313,6 @@
 	  To compile this driver as a module, choose M here: the module
 	  will be called starfire.  This is recommended.
 
-config ADAPTEC_STARFIRE_NAPI
-	bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
-	depends on ADAPTEC_STARFIRE && EXPERIMENTAL
-	help
-	  NAPI is a new driver API designed to reduce CPU and interrupt load
-	  when the driver is receiving lots of packets from the card. It is
-	  still somewhat experimental and thus not yet enabled by default.
-
-	  If your estimated Rx load is 10kpps or more, or if the card will be
-	  deployed on potentially unfriendly networks (e.g. in a firewall),
-	  then say Y here.
-
-	  If in doubt, say N.
-
 config AC3200
 	tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
 	depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
@@ -1679,7 +1655,7 @@
 
 config TLAN
 	tristate "TI ThunderLAN support"
-	depends on NET_PCI && (PCI || EISA) && !64BIT
+	depends on NET_PCI && (PCI || EISA)
 	---help---
 	  If you have a PCI Ethernet network card based on the ThunderLAN chip
 	  which is supported by this driver, say Y and read the
@@ -1719,26 +1695,6 @@
 
 	  If unsure, say Y.
 
-config VIA_RHINE_NAPI
-	bool "Use Rx Polling (NAPI)"
-	depends on VIA_RHINE
-	help
-	  NAPI is a new driver API designed to reduce CPU and interrupt load
-	  when the driver is receiving lots of packets from the card.
-
-	  If your estimated Rx load is 10kpps or more, or if the card will be
-	  deployed on potentially unfriendly networks (e.g. in a firewall),
-	  then say Y here.
-
-config LAN_SAA9730
-	bool "Philips SAA9730 Ethernet support"
-	depends on NET_PCI && PCI && MIPS_ATLAS
-	help
-	  The SAA9730 is a combined multimedia and peripheral controller used
-	  in thin clients, Internet access terminals, and diskless
-	  workstations.
-	  See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>.
-
 config SC92031
 	tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
 	depends on NET_PCI && PCI && EXPERIMENTAL
@@ -1893,7 +1849,6 @@
 	  Say Y here if you want to use the NE2000 compatible
 	  controller on the Renesas H8/300 processor.
 
-source "drivers/net/fec_8xx/Kconfig"
 source "drivers/net/fs_enet/Kconfig"
 
 endif # NET_ETHERNET
@@ -1981,20 +1936,6 @@
 	  To compile this driver as a module, choose M here. The module
 	  will be called e1000.
 
-config E1000_NAPI
-	bool "Use Rx Polling (NAPI)"
-	depends on E1000
-	help
-	  NAPI is a new driver API designed to reduce CPU and interrupt load
-	  when the driver is receiving lots of packets from the card. It is
-	  still somewhat experimental and thus not yet enabled by default.
-
-	  If your estimated Rx load is 10kpps or more, or if the card will be
-	  deployed on potentially unfriendly networks (e.g. in a firewall),
-	  then say Y here.
-
-	  If in doubt, say N.
-
 config E1000_DISABLE_PACKET_SPLIT
 	bool "Disable Packet Split for PCI express adapters"
 	depends on E1000
@@ -2023,9 +1964,6 @@
 	  To compile this driver as a module, choose M here. The module
 	  will be called e1000e.
 
-config E1000E_ENABLED
-	def_bool E1000E != n
-
 config IP1000
 	tristate "IP1000 Gigabit Ethernet support"
 	depends on PCI && EXPERIMENTAL
@@ -2057,6 +1995,15 @@
          To compile this driver as a module, choose M here. The module
          will be called igb.
 
+config IGB_LRO 
+	bool "Use software LRO"
+	depends on IGB && INET
+	select INET_LRO
+	---help---
+	  Say Y here if you want to use large receive offload. 
+
+	  If in doubt, say N.
+
 source "drivers/net/ixp2000/Kconfig"
 
 config MYRI_SBUS
@@ -2114,27 +2061,13 @@
 	  To compile this driver as a module, choose M here: the module
 	  will be called r8169.  This is recommended.
 
-config R8169_NAPI
-	bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
-	depends on R8169 && EXPERIMENTAL
-	help
-	  NAPI is a new driver API designed to reduce CPU and interrupt load
-	  when the driver is receiving lots of packets from the card. It is
-	  still somewhat experimental and thus not yet enabled by default.
-
-	  If your estimated Rx load is 10kpps or more, or if the card will be
-	  deployed on potentially unfriendly networks (e.g. in a firewall),
-	  then say Y here.
-
-	  If in doubt, say N.
-
 config R8169_VLAN
 	bool "VLAN support"
 	depends on R8169 && VLAN_8021Q
 	---help---
 	  Say Y here for the r8169 driver to support the functions required
 	  by the kernel 802.1Q code.
-	  
+
 	  If in doubt, say Y.
 
 config SB1250_MAC
@@ -2237,6 +2170,7 @@
 config TIGON3
 	tristate "Broadcom Tigon3 support"
 	depends on PCI
+	select PHYLIB
 	help
 	  This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
 
@@ -2292,6 +2226,19 @@
 	  the driver automatically distinguishes the models, you can
 	  safely enable this option even if you have a wireless-less model.
 
+config GELIC_WIRELESS_OLD_PSK_INTERFACE
+       bool "PS3 Wireless private PSK interface (OBSOLETE)"
+       depends on GELIC_WIRELESS
+       help
+          This option retains the obsolete private interface to pass
+          the PSK from user space programs to the driver.  The PSK
+          stands for 'Pre Shared Key' and is used for WPA[2]-PSK
+          (WPA-Personal) environment.
+          If WPA[2]-PSK is used and you need to use old programs that
+          support only this old interface, say Y.  Otherwise N.
+
+          If unsure, say N.
+
 config GIANFAR
 	tristate "Gianfar Ethernet"
 	depends on FSL_SOC
@@ -2301,10 +2248,6 @@
 	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
 	  and MPC86xx family of chips, and the FEC on the 8540.
 
-config GFAR_NAPI
-	bool "Use Rx Polling (NAPI)"
-	depends on GIANFAR
-
 config UCC_GETH
 	tristate "Freescale QE Gigabit Ethernet"
 	depends on QUICC_ENGINE
@@ -2313,10 +2256,6 @@
 	  This driver supports the Gigabit Ethernet mode of the QUICC Engine,
 	  which is available on some Freescale SOCs.
 
-config UGETH_NAPI
-	bool "Use Rx Polling (NAPI)"
-	depends on UCC_GETH
-
 config UGETH_MAGIC_PACKET
 	bool "Magic Packet detection support"
 	depends on UCC_GETH
@@ -2361,6 +2300,17 @@
 	  To compile this driver as a module, choose M here.  The module
 	  will be called atl1.
 
+config ATL1E
+	tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	select MII
+	help
+	  This driver supports the Atheros L1E gigabit ethernet adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl1e.
+
 endif # NETDEV_1000
 
 #
@@ -2406,18 +2356,11 @@
           Enables support for Chelsio's gigabit Ethernet PCI cards.  If you
           are using only 10G cards say 'N' here.
 
-config CHELSIO_T1_NAPI
-	bool "Use Rx Polling (NAPI)"
-	depends on CHELSIO_T1
-	default y
-	help
-	  NAPI is a driver API designed to reduce CPU and interrupt load
-	  when the driver is receiving lots of packets from the card.
-
 config CHELSIO_T3
 	tristate "Chelsio Communications T3 10Gb Ethernet support"
-	depends on PCI
+	depends on PCI && INET
 	select FW_LOADER
+	select INET_LRO
 	help
 	  This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
 	  adapters.
@@ -2445,7 +2388,8 @@
 
 config IXGBE
 	tristate "Intel(R) 10GbE PCI Express adapters support"
-	depends on PCI
+	depends on PCI && INET
+	select INET_LRO
 	---help---
 	  This driver supports Intel(R) 10GbE PCI Express family of
 	  adapters.  For more information on how to identify your adapter, go
@@ -2483,20 +2427,6 @@
 	  To compile this driver as a module, choose M here. The module
 	  will be called ixgb.
 
-config IXGB_NAPI
-	bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
-	depends on IXGB && EXPERIMENTAL
-	help
-	  NAPI is a new driver API designed to reduce CPU and interrupt load
-	  when the driver is receiving lots of packets from the card. It is
-	  still somewhat experimental and thus not yet enabled by default.
-
-	  If your estimated Rx load is 10kpps or more, or if the card will be
-	  deployed on potentially unfriendly networks (e.g. in a firewall),
-	  then say Y here.
-
-	  If in doubt, say N.
-
 config S2IO
 	tristate "S2IO 10Gbe XFrame NIC"
 	depends on PCI
@@ -2505,20 +2435,6 @@
 	  More specific information on configuring the driver is in 
 	  <file:Documentation/networking/s2io.txt>.
 
-config S2IO_NAPI
-	bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
-	depends on S2IO && EXPERIMENTAL
-	help
-	  NAPI is a new driver API designed to reduce CPU and interrupt load
-	  when the driver is receiving lots of packets from the card. It is
-	  still somewhat experimental and thus not yet enabled by default.
-
-	  If your estimated Rx load is 10kpps or more, or if the card will be
-	  deployed on potentially unfriendly networks (e.g. in a firewall),
-	  then say Y here.
-
-	  If in doubt, say N.
-
 config MYRI10GE
 	tristate "Myricom Myri-10G Ethernet support"
 	depends on PCI && INET
@@ -2583,6 +2499,7 @@
 	tristate "Broadcom NetXtremeII 10Gb support"
 	depends on PCI
 	select ZLIB_INFLATE
+	select LIBCRC32C
 	help
 	  This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
 	  To compile this driver as a module, choose M here: the module

Update of /cvsroot/gc-linux/linux/drivers/block
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/drivers/block

Modified Files:
	Kconfig Makefile rvl-stsd.c 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


Index: Makefile
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/block/Makefile,v
retrieving revision 1.20
retrieving revision 1.21
diff -u -d -r1.20 -r1.21
--- Makefile	13 Sep 2008 19:42:53 -0000	1.20
+++ Makefile	15 Nov 2008 20:10:14 -0000	1.21
@@ -36,5 +36,6 @@
 obj-$(CONFIG_VIODASD)		+= viodasd.o
 obj-$(CONFIG_BLK_DEV_SX8)	+= sx8.o
 obj-$(CONFIG_BLK_DEV_UB)	+= ub.o
+obj-$(CONFIG_BLK_DEV_HD)	+= hd.o
 
 obj-$(CONFIG_XEN_BLKDEV_FRONTEND)	+= xen-blkfront.o

Index: rvl-stsd.c
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/block/rvl-stsd.c,v
retrieving revision 1.4
retrieving revision 1.5
diff -u -d -r1.4 -r1.5
--- rvl-stsd.c	13 Sep 2008 19:42:53 -0000	1.4
+++ rvl-stsd.c	15 Nov 2008 20:10:14 -0000	1.5
@@ -21,8 +21,8 @@
 
 #define DEBUG
 
-#define DBG(fmt, arg...)	pr_debug(fmt, ##arg)
-//#define DBG(fmt, arg...)	drv_printk(KERN_ERR, fmt, ##arg)
+//#define DBG(fmt, arg...)	pr_debug(fmt, ##arg)
+#define DBG(fmt, arg...)	drv_printk(KERN_ERR, fmt, ##arg)
 
 #include <linux/blkdev.h>
 #include <linux/delay.h>
@@ -45,12 +45,13 @@
[...1260 lines suppressed...]
 static void stsd_exit_xfer(struct stsd_host *host)
 {
-	struct stsd_transfer *xfer = host->xfer;
+	struct stsd_xfer *xfer = host->xfer;
 
-	starlet_kfree(xfer->reply);
+	starlet_ioh_kfree(xfer->cmd);
+	starlet_ioh_kfree(xfer->reply);
 	starlet_kfree(host->xfer);
 }
 
@@ -1539,7 +2061,7 @@
 	host->max_phys_segments = 1;
 	blk_queue_max_phys_segments(queue, host->max_phys_segments);
 	blk_queue_max_hw_segments(queue, host->max_phys_segments);
-	blk_queue_max_sectors(queue, 16); /* 16 * 512 = 8K */
+	blk_queue_max_sectors(queue, STSD_MAX_SECTORS); /* 16 * 512 = 8K */
 	blk_queue_dma_alignment(queue, STARLET_IPC_DMA_ALIGN);
 	queue->queuedata = host;
 	host->queue = queue;

Index: Kconfig
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/block/Kconfig,v
retrieving revision 1.33
retrieving revision 1.34
diff -u -d -r1.33 -r1.34
--- Kconfig	13 Sep 2008 19:42:53 -0000	1.33
+++ Kconfig	15 Nov 2008 20:10:14 -0000	1.34
@@ -522,4 +522,16 @@
 	  This is the virtual block driver for virtio.  It can be used with
           lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
 
+config BLK_DEV_HD
+	bool "Very old hard disk (MFM/RLL/IDE) driver"
+	depends on HAVE_IDE
+	depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN
+	help
+	  This is a very old hard disk driver that lacks the enhanced
+	  functionality of the newer ones.
+
+	  It is required for systems with ancient MFM/RLL/ESDI drives.
+
+	  If unsure, say N.
+
 endif # BLK_DEV

Update of /cvsroot/gc-linux/linux/drivers/misc
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/drivers/misc

Modified Files:
	Kconfig Makefile gcn-mi.h 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


Index: Kconfig
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/misc/Kconfig,v
retrieving revision 1.12
retrieving revision 1.13
diff -u -d -r1.12 -r1.13
--- Kconfig	14 Sep 2008 19:20:29 -0000	1.12
+++ Kconfig	15 Nov 2008 20:10:14 -0000	1.13
@@ -99,11 +99,13 @@
 	  for your IBM server.
 
 config PHANTOM
-	tristate "Sensable PHANToM"
+	tristate "Sensable PHANToM (PCI)"
 	depends on PCI
 	help
 	  Say Y here if you want to build a driver for Sensable PHANToM device.
 
+	  This driver is only for PCI PHANToMs.
+
 	  If you choose to build module, its name will be phantom. If unsure,
 	  say N here.
 
@@ -201,17 +203,29 @@
         tristate "Fujitsu Laptop Extras"
         depends on X86
         depends on ACPI
+	depends on INPUT
         depends on BACKLIGHT_CLASS_DEVICE
         ---help---
 	  This is a driver for laptops built by Fujitsu:
 
 	    * P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks
 	    * Possibly other Fujitsu laptop models
+	    * Tested with S6410 and S7020
 
-	  It adds support for LCD brightness control.
+	  It adds support for LCD brightness control and some hotkeys.
 
 	  If you have a Fujitsu laptop, say Y or M here.
 
+config FUJITSU_LAPTOP_DEBUG
+	bool "Verbose debug mode for Fujitsu Laptop Extras"
+	depends on FUJITSU_LAPTOP
+	default n
+	---help---
+	  Enables extra debug output from the fujitsu extras driver, at the
+	  expense of a slight increase in driver size.
+
+	  If you are not sure, say N here.
+
 config TC1100_WMI
 	tristate "HP Compaq TC1100 Tablet WMI Extras (EXPERIMENTAL)"
 	depends on X86 && !X86_64
@@ -222,6 +236,18 @@
 	  This is a driver for the WMI extensions (wireless and bluetooth power
 	  control) of the HP Compaq TC1100 tablet.
 
+config HP_WMI
+       tristate "HP WMI extras"
+       depends on ACPI_WMI
+       depends on INPUT
+       depends on RFKILL
+       help
+         Say Y here if you want to support WMI-based hotkeys on HP laptops and
+	 to read data from WMI such as docking or ambient light sensor state.
+
+         To compile this driver as a module, choose M here: the module will
+         be called hp-wmi.
+
 config MSI_LAPTOP
         tristate "MSI Laptop Extras"
         depends on X86
@@ -241,6 +267,23 @@
 
 	  If you have an MSI S270 laptop, say Y or M here.
 
+config COMPAL_LAPTOP
+	tristate "Compal Laptop Extras"
+	depends on X86
+	depends on ACPI_EC
+	depends on BACKLIGHT_CLASS_DEVICE
+	---help---
+	  This is a driver for laptops built by Compal:
+
+	  Compal FL90/IFL90
+	  Compal FL91/IFL91
+	  Compal FL92/JFL92
+	  Compal FT00/IFT00
+
+	  It adds support for Bluetooth, WLAN and LCD brightness control.
+
+	  If you have an Compal FL9x/IFL9x/FT00 laptop, say Y or M here.
+
 config SONY_LAPTOP
 	tristate "Sony Laptop Extras"
 	depends on X86 && ACPI
@@ -272,6 +315,8 @@
 	select INPUT
 	select NEW_LEDS
 	select LEDS_CLASS
+	select NET
+	select RFKILL
 	---help---
 	  This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
 	  support for Fn-Fx key combinations, Bluetooth control, video
@@ -337,7 +382,7 @@
 	  If you are not sure, say Y here.
 
 config THINKPAD_ACPI_HOTKEY_POLL
-	bool "Suport NVRAM polling for hot keys"
+	bool "Support NVRAM polling for hot keys"
 	depends on THINKPAD_ACPI
 	default y
 	---help---
@@ -403,9 +448,11 @@
 
 config SGI_XP
 	tristate "Support communication between SGI SSIs"
-	depends on IA64_GENERIC || IA64_SGI_SN2
+	depends on NET
+	depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_64) && SMP
 	select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
 	select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
+	select SGI_GRU if (IA64_GENERIC || IA64_SGI_UV || X86_64) && SMP
 	---help---
 	  An SGI machine can be divided into multiple Single System
 	  Images which act independently of each other and have
@@ -413,4 +460,41 @@
 	  this feature will allow for direct communication between SSIs
 	  based on a network adapter and DMA messaging.
 
+config HP_ILO
+	tristate "Channel interface driver for HP iLO/iLO2 processor"
+	depends on PCI
+	default n
+	help
+	  The channel interface driver allows applications to communicate
+	  with iLO/iLO2 management processors present on HP ProLiant
+	  servers.  Upon loading, the driver creates /dev/hpilo/dXccbN files,
+	  which can be used to gather data from the management processor,
+	  via read and write system calls.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hpilo.
+
+config SGI_GRU
+	tristate "SGI GRU driver"
+	depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP
+	default n
+	select MMU_NOTIFIER
+	---help---
+	The GRU is a hardware resource located in the system chipset. The GRU
+	contains memory that can be mmapped into the user address space. This memory is
+	used to communicate with the GRU to perform functions such as load/store,
+	scatter/gather, bcopy, AMOs, etc.  The GRU is directly accessed by user
+	instructions using user virtual addresses. GRU instructions (ex., bcopy) use
+	user virtual addresses for operands.
+
+	If you are not running on a SGI UV system, say N.
+
+config SGI_GRU_DEBUG
+	bool  "SGI GRU driver debug"
+	depends on SGI_GRU
+	default n
+	---help---
+	This option enables addition debugging code for the SGI GRU driver. If
+	you are unsure, say N.
+
 endif # MISC_DEVICES

Index: Makefile
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/misc/Makefile,v
retrieving revision 1.8
retrieving revision 1.9
diff -u -d -r1.8 -r1.9
--- Makefile	14 Sep 2008 19:20:29 -0000	1.8
+++ Makefile	15 Nov 2008 20:10:14 -0000	1.9
@@ -5,13 +5,15 @@
 
 obj-$(CONFIG_IBM_ASM)		+= ibmasm/
 obj-$(CONFIG_HDPU_FEATURES)	+= hdpuftrs/
-obj-$(CONFIG_MSI_LAPTOP)     += msi-laptop.o
-obj-$(CONFIG_ACER_WMI)     += acer-wmi.o
 obj-$(CONFIG_ASUS_LAPTOP)	+= asus-laptop.o
 obj-$(CONFIG_EEEPC_LAPTOP)	+= eeepc-laptop.o
+obj-$(CONFIG_MSI_LAPTOP)	+= msi-laptop.o
+obj-$(CONFIG_COMPAL_LAPTOP)	+= compal-laptop.o
+obj-$(CONFIG_ACER_WMI)		+= acer-wmi.o
 obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
 obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
 obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
+obj-$(CONFIG_HP_WMI)		+= hp-wmi.o
 obj-$(CONFIG_TC1100_WMI)	+= tc1100-wmi.o
 obj-$(CONFIG_LKDTM)		+= lkdtm.o
 obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
@@ -26,5 +28,8 @@
 obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
 obj-$(CONFIG_KGDB_TESTS)	+= kgdbts.o
 obj-$(CONFIG_SGI_XP)		+= sgi-xp/
+obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
+obj-$(CONFIG_HP_ILO)		+= hpilo.o
 obj-$(CONFIG_GAMECUBE_GQR)	+= gcn-gqr.o
 obj-$(CONFIG_GAMECUBE_MI)	+= gcn-mi.o
+

Index: gcn-mi.h
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/misc/gcn-mi.h,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -d -r1.2 -r1.3
--- gcn-mi.h	17 Feb 2007 23:43:41 -0000	1.2
+++ gcn-mi.h	15 Nov 2008 20:10:14 -0000	1.3
@@ -1,9 +1,9 @@
 /*
- * arch/ppc/platforms/gcn-mi.h
+ * drivers/misc/gcn-mi.h
  *
  * Nintendo GameCube Memory Interface driver
- * Copyright (C) 2004-2005 The GameCube Linux Team
- * Copyright (C) 2004,2005 Albert Herranz
+ * Copyright (C) 2004-2008 The GameCube Linux Team
+ * Copyright (C) 2004,2005,2008 Albert Herranz
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License

Update of /cvsroot/gc-linux/linux/fs
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/fs

Modified Files:
	Kconfig Makefile 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


Index: Makefile
===================================================================
RCS file: /cvsroot/gc-linux/linux/fs/Makefile,v
retrieving revision 1.10
retrieving revision 1.11
diff -u -d -r1.10 -r1.11
--- Makefile	13 Sep 2008 19:42:57 -0000	1.10
+++ Makefile	15 Nov 2008 20:10:15 -0000	1.11
@@ -19,6 +19,7 @@
 obj-y +=	no-block.o
 endif
 
+obj-$(CONFIG_BLK_DEV_INTEGRITY) += bio-integrity.o
 obj-$(CONFIG_INOTIFY)		+= inotify.o
 obj-$(CONFIG_INOTIFY_USER)	+= inotify_user.o
 obj-$(CONFIG_EPOLL)		+= eventpoll.o
@@ -101,6 +102,7 @@
 obj-$(CONFIG_UFS_FS)		+= ufs/
 obj-$(CONFIG_EFS_FS)		+= efs/
 obj-$(CONFIG_JFFS2_FS)		+= jffs2/
+obj-$(CONFIG_UBIFS_FS)		+= ubifs/
 obj-$(CONFIG_AFFS_FS)		+= affs/
 obj-$(CONFIG_ROMFS_FS)		+= romfs/
 obj-$(CONFIG_QNX4FS_FS)		+= qnx4/
@@ -110,6 +112,7 @@
 obj-$(CONFIG_FUSE_FS)		+= fuse/
 obj-$(CONFIG_UDF_FS)		+= udf/
 obj-$(CONFIG_SUN_OPENPROMFS)	+= openpromfs/
+obj-$(CONFIG_OMFS_FS)		+= omfs/
 obj-$(CONFIG_JFS_FS)		+= jfs/
 obj-$(CONFIG_XFS_FS)		+= xfs/
 obj-$(CONFIG_9P_FS)		+= 9p/

Index: Kconfig
===================================================================
RCS file: /cvsroot/gc-linux/linux/fs/Kconfig,v
retrieving revision 1.12
retrieving revision 1.13
diff -u -d -r1.12 -r1.13
--- Kconfig	14 Sep 2008 19:20:31 -0000	1.12
+++ Kconfig	15 Nov 2008 20:10:15 -0000	1.13
@@ -470,6 +470,14 @@
 	  It is safe to say Y, as the clustering method is run-time
 	  selectable.
 
+config OCFS2_FS_STATS
+	bool "OCFS2 statistics"
+	depends on OCFS2_FS
+	default y
+	help
+	  This option allows some fs statistics to be captured. Enabling
+	  this option may increase the memory consumption.
+
 config OCFS2_DEBUG_MASKLOG
 	bool "OCFS2 logging support"
 	depends on OCFS2_FS
@@ -905,65 +913,7 @@
 
 menu "Pseudo filesystems"
 
-config PROC_FS
-	bool "/proc file system support" if EMBEDDED
-	default y
-	help
-	  This is a virtual file system providing information about the status
-	  of the system. "Virtual" means that it doesn't take up any space on
-	  your hard disk: the files are created on the fly by the kernel when
-	  you try to access them. Also, you cannot read the files with older
-	  version of the program less: you need to use more or cat.
-
-	  It's totally cool; for example, "cat /proc/interrupts" gives
-	  information about what the different IRQs are used for at the moment
-	  (there is a small number of Interrupt ReQuest lines in your computer
-	  that are used by the attached devices to gain the CPU's attention --
-	  often a source of trouble if two devices are mistakenly configured
-	  to use the same IRQ). The program procinfo to display some
-	  information about your system gathered from the /proc file system.
-
-	  Before you can use the /proc file system, it has to be mounted,
-	  meaning it has to be given a location in the directory hierarchy.
-	  That location should be /proc. A command such as "mount -t proc proc
-	  /proc" or the equivalent line in /etc/fstab does the job.
-
-	  The /proc file system is explained in the file
-	  <file:Documentation/filesystems/proc.txt> and on the proc(5) manpage
-	  ("man 5 proc").
-
-	  This option will enlarge your kernel by about 67 KB. Several
-	  programs depend on this, so everyone should say Y here.
-
-config PROC_KCORE
-	bool "/proc/kcore support" if !ARM
-	depends on PROC_FS && MMU
-
-config PROC_VMCORE
-        bool "/proc/vmcore support (EXPERIMENTAL)"
-        depends on PROC_FS && EXPERIMENTAL && CRASH_DUMP
-	default y
-        help
-        Exports the dump image of crashed kernel in ELF format.
-
-config PROC_SYSCTL
-	bool "Sysctl support (/proc/sys)" if EMBEDDED
-	depends on PROC_FS
-	select SYSCTL
-	default y
-	---help---
-	  The sysctl interface provides a means of dynamically changing
-	  certain kernel parameters and variables on the fly without requiring
-	  a recompile of the kernel or reboot of the system.  The primary
-	  interface is through /proc/sys.  If you say Y here a tree of
-	  modifiable sysctl entries will be generated beneath the
-          /proc/sys directory. They are explained in the files
-	  in <file:Documentation/sysctl/>.  Note that enabling this
-	  option will enlarge the kernel by at least 8 KB.
-
-	  As it is generally a good thing, you should say Y here unless
-	  building a kernel for install/rescue disks or your system is very
-	  limited in memory.
+source "fs/proc/Kconfig"
 
 config SYSFS
 	bool "sysfs file system support" if EMBEDDED
@@ -1386,6 +1336,9 @@
 
 endchoice
 
+# UBIFS File system configuration
+source "fs/ubifs/Kconfig"
+
 config CRAMFS
 	tristate "Compressed ROM file system support (cramfs)"
 	depends on BLOCK
@@ -1441,6 +1394,19 @@
 	  partition (the one containing the directory /) cannot be compiled as
 	  a module.
 
+config OMFS_FS
+	tristate "SonicBlue Optimized MPEG File System support"
+	depends on BLOCK
+	select CRC_ITU_T
+	help
+	  This is the proprietary file system used by the Rio Karma music
+	  player and ReplayTV DVR.  Despite the name, this filesystem is not
+	  more efficient than a standard FS for MPEG files, in fact likely
+	  the opposite is true.  Say Y if you have either of these devices
+	  and wish to mount its disk.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called omfs.  If unsure, say N.
 
 config HPFS_FS
 	tristate "OS/2 HPFS file system support"
@@ -1555,10 +1521,6 @@
           The recently released UFS2 variant (used in FreeBSD 5.x) is
           READ-ONLY supported.
 
-	  If you only intend to mount files from some other Unix over the
-	  network using NFS, you don't need the UFS file system support (but
-	  you need NFS file system support obviously).
-
 	  Note that this option is generally not needed for floppies, since a
 	  good portable way to transport files and directories between unixes
 	  (and even other operating systems) is given by the tar program ("man
@@ -1598,6 +1560,7 @@
 	  Say Y here to get to see options for network filesystems and
 	  filesystem-related networking code, such as NFS daemon and
 	  RPCSEC security modules.
+
 	  This option alone does not add any kernel code.
 
 	  If you say N, all options in this submenu will be skipped and
@@ -1606,76 +1569,92 @@
 if NETWORK_FILESYSTEMS
 
 config NFS_FS
-	tristate "NFS file system support"
+	tristate "NFS client support"
 	depends on INET
 	select LOCKD
 	select SUNRPC
 	select NFS_ACL_SUPPORT if NFS_V3_ACL
 	help
-	  If you are connected to some other (usually local) Unix computer
-	  (using SLIP, PLIP, PPP or Ethernet) and want to mount files residing
-	  on that computer (the NFS server) using the Network File Sharing
-	  protocol, say Y. "Mounting files" means that the client can access
-	  the files with usual UNIX commands as if they were sitting on the
-	  client's hard disk. For this to work, the server must run the
-	  programs nfsd and mountd (but does not need to have NFS file system
-	  support enabled in its kernel). NFS is explained in the Network
-	  Administrator's Guide, available from
-	  <http://www.tldp.org/docs.html#guide>, on its man page: "man
-	  nfs", and in the NFS-HOWTO.
-
-	  A superior but less widely used alternative to NFS is provided by
-	  the Coda file system; see "Coda file system support" below.
+	  Choose Y here if you want to access files residing on other
+	  computers using Sun's Network File System protocol.  To compile
+	  this file system support as a module, choose M here: the module
+	  will be called nfs.
 
-	  If you say Y here, you should have said Y to TCP/IP networking also.
-	  This option would enlarge your kernel by about 27 KB.
+	  To mount file systems exported by NFS servers, you also need to
+	  install the user space mount.nfs command which can be found in
+	  the Linux nfs-utils package, available from http://linux-nfs.org/.
+	  Information about using the mount command is available in the
+	  mount(8) man page.  More detail about the Linux NFS client
+	  implementation is available via the nfs(5) man page.
 
-	  To compile this file system support as a module, choose M here: the
-	  module will be called nfs.
+	  Below you can choose which versions of the NFS protocol are
+	  available in the kernel to mount NFS servers.  Support for NFS
+	  version 2 (RFC 1094) is always available when NFS_FS is selected.
 
-	  If you are configuring a diskless machine which will mount its root
-	  file system over NFS at boot time, say Y here and to "Kernel
-	  level IP autoconfiguration" above and to "Root file system on NFS"
-	  below. You cannot compile this driver as a module in this case.
-	  There are two packages designed for booting diskless machines over
-	  the net: netboot, available from
-	  <http://ftp1.sourceforge.net/netboot/>, and Etherboot,
-	  available from <http://ftp1.sourceforge.net/etherboot/>.
+	  To configure a system which mounts its root file system via NFS
+	  at boot time, say Y here, select "Kernel level IP
+	  autoconfiguration" in the NETWORK menu, and select "Root file
+	  system on NFS" below.  You cannot compile this file system as a
+	  module in this case.
 
-	  If you don't know what all this is about, say N.
+	  If unsure, say N.
 
 config NFS_V3
-	bool "Provide NFSv3 client support"
+	bool "NFS client support for NFS version 3"
 	depends on NFS_FS
 	help
-	  Say Y here if you want your NFS client to be able to speak version
-	  3 of the NFS protocol.
+	  This option enables support for version 3 of the NFS protocol
+	  (RFC 1813) in the kernel's NFS client.
 
 	  If unsure, say Y.
 
 config NFS_V3_ACL
-	bool "Provide client support for the NFSv3 ACL protocol extension"
+	bool "NFS client support for the NFSv3 ACL protocol extension"
 	depends on NFS_V3
 	help
-	  Implement the NFSv3 ACL protocol extension for manipulating POSIX
-	  Access Control Lists.  The server should also be compiled with
-	  the NFSv3 ACL protocol extension; see the CONFIG_NFSD_V3_ACL option.
+	  Some NFS servers support an auxiliary NFSv3 ACL protocol that
+	  Sun added to Solaris but never became an official part of the
+	  NFS version 3 protocol.  This protocol extension allows
+	  applications on NFS clients to manipulate POSIX Access Control
+	  Lists on files residing on NFS servers.  NFS servers enforce
+	  ACLs on local files whether this protocol is available or not.
+
+	  Choose Y here if your NFS server supports the Solaris NFSv3 ACL
+	  protocol extension and you want your NFS client to allow
+	  applications to access and modify ACLs on files on the server.
+
+	  Most NFS servers don't support the Solaris NFSv3 ACL protocol
+	  extension.  You can choose N here or specify the "noacl" mount
+	  option to prevent your NFS client from trying to use the NFSv3
+	  ACL protocol.
 
 	  If unsure, say N.
 
 config NFS_V4
-	bool "Provide NFSv4 client support (EXPERIMENTAL)"
+	bool "NFS client support for NFS version 4 (EXPERIMENTAL)"
 	depends on NFS_FS && EXPERIMENTAL
 	select RPCSEC_GSS_KRB5
 	help
-	  Say Y here if you want your NFS client to be able to speak the newer
-	  version 4 of the NFS protocol.
+	  This option enables support for version 4 of the NFS protocol
+	  (RFC 3530) in the kernel's NFS client.
 
-	  Note: Requires auxiliary userspace daemons which may be found on
-		http://www.citi.umich.edu/projects/nfsv4/
+	  To mount NFS servers using NFSv4, you also need to install user
+	  space programs which can be found in the Linux nfs-utils package,
+	  available from http://linux-nfs.org/.
 
 	  If unsure, say N.
 
+config ROOT_NFS
+	bool "Root file system on NFS"
+	depends on NFS_FS=y && IP_PNP
+	help
+	  If you want your system to mount its root file system via NFS,
+	  choose Y here.  This is common practice for managing systems
+	  without local permanent storage.  For details, read
+	  <file:Documentation/filesystems/nfsroot.txt>.
+
+	  Most people say N here.
+
 config NFSD
 	tristate "NFS server support"
 	depends on INET
@@ -1757,20 +1736,6 @@
 
 	  If unsure, say N.
 
-config ROOT_NFS
-	bool "Root file system on NFS"
-	depends on NFS_FS=y && IP_PNP
-	help
-	  If you want your Linux box to mount its whole root file system (the
-	  one containing the directory /) from some other computer over the
-	  net via NFS (presumably because your box doesn't have a hard disk),
-	  say Y. Read <file:Documentation/filesystems/nfsroot.txt> for
-	  details. It is likely that in this case, you also want to say Y to
-	  "Kernel level IP autoconfiguration" so that your box can discover
-	  its network address at boot time.
-
-	  Most people say N here.
-
 config LOCKD
 	tristate
 
@@ -1811,27 +1776,6 @@
 
 	  If unsure, say N.
 
-config SUNRPC_BIND34
-	bool "Support for rpcbind versions 3 & 4 (EXPERIMENTAL)"
-	depends on SUNRPC && EXPERIMENTAL
-	default n
-	help
-	  RPC requests over IPv6 networks require support for larger
-	  addresses when performing an RPC bind.  Sun added support for
-	  IPv6 addressing by creating two new versions of the rpcbind
-	  protocol (RFC 1833).
-
-	  This option enables support in the kernel RPC client for
-	  querying rpcbind servers via versions 3 and 4 of the rpcbind
-	  protocol.  The kernel automatically falls back to version 2
-	  if a remote rpcbind service does not support versions 3 or 4.
-	  By themselves, these new versions do not provide support for
-	  RPC over IPv6, but the new protocol versions are necessary to
-	  support it.
-
-	  If unsure, say N to get traditional behavior (version 2 rpcbind
-	  requests only).
-
 config RPCSEC_GSS_KRB5
 	tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
 	depends on SUNRPC && EXPERIMENTAL
@@ -1997,6 +1941,16 @@
 
 	  If unsure, say N.
 
+config CIFS_UPCALL
+	  bool "Kerberos/SPNEGO advanced session setup"
+	  depends on CIFS && KEYS
+	  help
+	    Enables an upcall mechanism for CIFS which accesses
+	    userspace helper utilities to provide SPNEGO packaged (RFC 4178)
+	    Kerberos tickets which are needed to mount to certain secure servers
+	    (for which more secure Kerberos authentication is required). If
+	    unsure, say N.
+
 config CIFS_XATTR
         bool "CIFS extended attributes"
         depends on CIFS
@@ -2049,17 +2003,6 @@
 	    (which is disabled by default). See the file fs/cifs/README 
 	    for more details.  If unsure, say N.
 
-config CIFS_UPCALL
-	  bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)"
-	  depends on CIFS_EXPERIMENTAL
-	  depends on KEYS
-	  help
-	    Enables an upcall mechanism for CIFS which accesses
-	    userspace helper utilities to provide SPNEGO packaged (RFC 4178)
-	    Kerberos tickets which are needed to mount to certain secure servers
-	    (for which more secure Kerberos authentication is required). If
-	    unsure, say N.
-
 config CIFS_DFS_UPCALL
 	  bool "DFS feature support (EXPERIMENTAL)"
 	  depends on CIFS_EXPERIMENTAL
@@ -2115,20 +2058,6 @@
 	  To compile the coda client support as a module, choose M here: the
 	  module will be called coda.
 
-config CODA_FS_OLD_API
-	bool "Use 96-bit Coda file identifiers"
-	depends on CODA_FS
-	help
-	  A new kernel-userspace API had to be introduced for Coda v6.0
-	  to support larger 128-bit file identifiers as needed by the
-	  new realms implementation.
-
-	  However this new API is not backward compatible with older
-	  clients. If you really need to run the old Coda userspace
-	  cache manager then say Y.
-
-	  For most cases you probably want to say N.
-
 config AFS_FS
 	tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
 	depends on INET && EXPERIMENTAL

Update of /cvsroot/gc-linux/linux/drivers/video
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/drivers/video

Modified Files:
	Kconfig Makefile 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


Index: Makefile
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/video/Makefile,v
retrieving revision 1.27
retrieving revision 1.28
diff -u -d -r1.27 -r1.28
--- Makefile	14 Sep 2008 19:20:31 -0000	1.27
+++ Makefile	15 Nov 2008 20:10:15 -0000	1.28
@@ -106,17 +106,21 @@
 obj-$(CONFIG_FB_MAXINE)		  += maxinefb.o
 obj-$(CONFIG_FB_METRONOME)        += metronomefb.o
 obj-$(CONFIG_FB_S1D13XXX)	  += s1d13xxxfb.o
+obj-$(CONFIG_FB_SH7760)		  += sh7760fb.o
 obj-$(CONFIG_FB_IMX)              += imxfb.o
 obj-$(CONFIG_FB_S3C2410)	  += s3c2410fb.o
 obj-$(CONFIG_FB_FSL_DIU)	  += fsl-diu-fb.o
+obj-$(CONFIG_FB_COBALT)           += cobalt_lcdfb.o
 obj-$(CONFIG_FB_PNX4008_DUM)	  += pnx4008/
 obj-$(CONFIG_FB_PNX4008_DUM_RGB)  += pnx4008/
 obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
 obj-$(CONFIG_FB_PS3)		  += ps3fb.o
 obj-$(CONFIG_FB_SM501)            += sm501fb.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
+obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
 obj-$(CONFIG_FB_OMAP)             += omap/
 obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
+obj-$(CONFIG_FB_CARMINE)          += carminefb.o
 obj-$(CONFIG_FB_GAMECUBE)	  += gcnfb.o
 obj-$(CONFIG_FB_GAMECUBE_GX)	  += gcngx.o
 

Index: Kconfig
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/video/Kconfig,v
retrieving revision 1.29
retrieving revision 1.30
diff -u -d -r1.29 -r1.30
--- Kconfig	14 Sep 2008 19:20:31 -0000	1.29
+++ Kconfig	15 Nov 2008 20:10:15 -0000	1.30
@@ -7,7 +7,7 @@
 
 source "drivers/char/agp/Kconfig"
 
-source "drivers/char/drm/Kconfig"
+source "drivers/gpu/drm/Kconfig"
 
 config VGASTATE
        tristate
@@ -1658,6 +1658,32 @@
 	  similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
 	  and maybe other boards.
 
+config FB_CARMINE
+	tristate "Fujitsu carmine frame buffer support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Fujitsu Carmine chip.
+	  The driver provides two independent frame buffer devices.
+
+choice
+	depends on FB_CARMINE
+	prompt "DRAM timing"
+	default FB_CARMINE_DRAM_EVAL
+
+config FB_CARMINE_DRAM_EVAL
+	bool "Eval board timings"
+	help
+	  Use timings which work on the eval card.
+
+config CARMINE_DRAM_CUSTOM
+	bool "Custom board timings"
+	help
+	  Use custom board timings.
+endchoice
+
 config FB_GAMECUBE
 	bool "Nintendo GameCube/Wii frame buffer"
 	depends on FB && GAMECUBE_COMMON
@@ -1855,6 +1881,16 @@
 
 	  If unsure, say N.
 
+config FB_SH_MOBILE_LCDC
+	tristate "SuperH Mobile LCDC framebuffer support"
+	depends on FB && SUPERH
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	default m
+	---help---
+	  Frame buffer driver for the on-chip SH-Mobile LCD controller.
+
 config FB_S3C2410
 	tristate "S3C2410 LCD framebuffer support"
 	depends on FB && ARCH_S3C2410
@@ -1966,6 +2002,23 @@
          This enables support for the Metronome display controller used on
          the E-Ink AM-200 EPD devkit.
 
+config FB_COBALT
+	tristate "Cobalt server LCD frame buffer support"
+	depends on FB && MIPS_COBALT
+
+config FB_SH7760
+       bool "SH7760/SH7763 LCDC support"
+       depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763)
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       help
+         Support for the SH7760/SH7763 integrated (D)STN/TFT LCD Controller.
+         Supports display resolutions up to 1024x1024 pixel, grayscale and
+         color operation, with depths ranging from 1 bpp to 8 bpp monochrome
+         and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
+         panels <= 320 pixel horizontal resolution.
+
 config FB_VIRTUAL
 	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
 	depends on FB

Update of /cvsroot/gc-linux/linux/arch/powerpc/configs
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/arch/powerpc/configs

Modified Files:
	gamecube_defconfig wii_defconfig 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


Index: wii_defconfig
===================================================================
RCS file: /cvsroot/gc-linux/linux/arch/powerpc/configs/wii_defconfig,v
retrieving revision 1.8
retrieving revision 1.9
diff -u -d -r1.8 -r1.9
--- wii_defconfig	14 Sep 2008 19:20:27 -0000	1.8
+++ wii_defconfig	15 Nov 2008 20:10:14 -0000	1.9
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Sun Sep 14 20:03:35 2008
+# Linux kernel version: 2.6.27
+# Sat Nov 15 20:35:35 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -33,12 +33,14 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -91,8 +93,9 @@
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_KALLSYMS is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -113,10 +116,17 @@
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 # CONFIG_PROC_PAGE_MONITOR is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -133,6 +143,7 @@
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -152,31 +163,34 @@
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 # CONFIG_STORCENTER is not set
 # CONFIG_MPC7448HPC2 is not set
 # CONFIG_PPC_HOLLY is not set
 # CONFIG_PPC_PRPMC2800 is not set
+# CONFIG_PPC_C2K is not set
 # CONFIG_GAMECUBE is not set
 CONFIG_WII=y
 CONFIG_FLIPPER_PIC=y
 CONFIG_GAMECUBE_COMMON=y
 CONFIG_GAMECUBE_RSW=y
+CONFIG_GAMECUBE_UDBG=y
 CONFIG_USBGECKO_UDBG=y
+# CONFIG_GAMECUBE_VIDEO_UDBG is not set
+CONFIG_WII_GPIO=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -228,6 +242,7 @@
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -235,6 +250,7 @@
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -255,23 +271,19 @@
 # Advanced setup
 #
 CONFIG_ADVANCED_OPTIONS=y
-CONFIG_LOWMEM_SIZE_BOOL=y
-CONFIG_LOWMEM_SIZE=0x01800000
+# CONFIG_LOWMEM_SIZE_BOOL is not set
+CONFIG_LOWMEM_SIZE=0x30000000
 # CONFIG_PAGE_OFFSET_BOOL is not set
 CONFIG_PAGE_OFFSET=0xc0000000
 # CONFIG_KERNEL_START_BOOL is not set
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE_BOOL=y
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START_BOOL=y
+# CONFIG_TASK_SIZE_BOOL is not set
+CONFIG_TASK_SIZE=0xc0000000
+# CONFIG_CONSISTENT_START_BOOL is not set
 CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE_BOOL=y
-CONFIG_CONSISTENT_SIZE=0x00010000
-
-#
-# Networking
-#
+# CONFIG_CONSISTENT_SIZE_BOOL is not set
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -344,8 +356,7 @@
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=y
-# CONFIG_BT_HCIUSB_SCO is not set
+CONFIG_BT_HCIBTUSB=y
 # CONFIG_BT_HCIUART is not set
 # CONFIG_BT_HCIBCM203X is not set
 # CONFIG_BT_HCIBPA10X is not set
@@ -380,12 +391,13 @@
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
 CONFIG_GAMECUBE_SD=y
 CONFIG_WII_SD=y
-CONFIG_WII_MEM2=y
+CONFIG_WII_MEM2=m
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -397,8 +409,9 @@
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-CONFIG_GAMECUBE_GQR=y
+CONFIG_GAMECUBE_GQR=m
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 CONFIG_HAVE_IDE=y
@@ -444,11 +457,11 @@
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -528,11 +541,14 @@
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_ANALOG is not set
 # CONFIG_JOYSTICK_A3D is not set
@@ -573,6 +589,7 @@
 # CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 CONFIG_GAMECUBE_SI=y
 
@@ -580,6 +597,7 @@
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -612,6 +630,22 @@
 #
 CONFIG_GAMECUBE_EXI=y
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -628,8 +662,10 @@
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -698,15 +734,7 @@
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -722,53 +750,17 @@
 # CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerMac requires I2C
-#
-
-#
-# ALSA PowerPC devices
-#
+CONFIG_SND_PPC=y
 CONFIG_SND_GAMECUBE=y
 CONFIG_SND_GAMECUBE_MIC=m
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
+# CONFIG_SND_USB is not set
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -788,7 +780,7 @@
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 
 #
 # Miscellaneous USB options
@@ -799,6 +791,7 @@
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB Host Controller Drivers
@@ -845,7 +838,6 @@
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -858,7 +850,6 @@
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -987,6 +978,7 @@
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -997,13 +989,12 @@
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1066,6 +1057,7 @@
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1090,8 +1082,10 @@
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
@@ -1101,22 +1095,36 @@
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set

Index: gamecube_defconfig
===================================================================
RCS file: /cvsroot/gc-linux/linux/arch/powerpc/configs/gamecube_defconfig,v
retrieving revision 1.4
retrieving revision 1.5
diff -u -d -r1.4 -r1.5
--- gamecube_defconfig	14 Sep 2008 19:20:27 -0000	1.4
+++ gamecube_defconfig	15 Nov 2008 20:10:14 -0000	1.5
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Sun Sep 14 19:49:21 2008
+# Linux kernel version: 2.6.27
+# Sat Nov 15 18:13:50 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -33,6 +33,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -91,8 +92,9 @@
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_KALLSYMS is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -113,10 +115,17 @@
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 # CONFIG_PROC_PAGE_MONITOR is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -133,6 +142,7 @@
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -152,31 +162,33 @@
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 # CONFIG_STORCENTER is not set
 # CONFIG_MPC7448HPC2 is not set
 # CONFIG_PPC_HOLLY is not set
 # CONFIG_PPC_PRPMC2800 is not set
+# CONFIG_PPC_C2K is not set
 CONFIG_GAMECUBE=y
 # CONFIG_WII is not set
 CONFIG_FLIPPER_PIC=y
 CONFIG_GAMECUBE_COMMON=y
 CONFIG_GAMECUBE_RSW=y
+CONFIG_GAMECUBE_UDBG=y
 CONFIG_USBGECKO_UDBG=y
+# CONFIG_GAMECUBE_VIDEO_UDBG is not set
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -228,6 +240,7 @@
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -235,6 +248,7 @@
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -255,23 +269,19 @@
 # Advanced setup
 #
 CONFIG_ADVANCED_OPTIONS=y
-CONFIG_LOWMEM_SIZE_BOOL=y
-CONFIG_LOWMEM_SIZE=0x01800000
+# CONFIG_LOWMEM_SIZE_BOOL is not set
+CONFIG_LOWMEM_SIZE=0x30000000
 # CONFIG_PAGE_OFFSET_BOOL is not set
 CONFIG_PAGE_OFFSET=0xc0000000
 # CONFIG_KERNEL_START_BOOL is not set
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE_BOOL=y
-CONFIG_TASK_SIZE=0x80000000
+# CONFIG_TASK_SIZE_BOOL is not set
+CONFIG_TASK_SIZE=0xc0000000
 # CONFIG_CONSISTENT_START_BOOL is not set
 CONFIG_CONSISTENT_START=0xff100000
 # CONFIG_CONSISTENT_SIZE_BOOL is not set
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -379,6 +389,7 @@
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 CONFIG_GAMECUBE_GQR=y
 # CONFIG_EEPROM_93CX6 is not set
@@ -397,7 +408,6 @@
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -490,6 +500,7 @@
 # CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 CONFIG_GAMECUBE_SI=y
 
@@ -497,6 +508,7 @@
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -512,8 +524,7 @@
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_USBGECKO=y
+# CONFIG_SERIAL_USBGECKO is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
@@ -530,6 +541,8 @@
 #
 CONFIG_GAMECUBE_EXI=y
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -546,8 +559,10 @@
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -620,15 +635,7 @@
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_GAMECUBE_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -644,46 +651,16 @@
 # CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerMac requires I2C
-#
-
-#
-# ALSA PowerPC devices
-#
+CONFIG_SND_PPC=y
 CONFIG_SND_GAMECUBE=y
-CONFIG_SND_GAMECUBE_MIC=y
-
-#
-# System on Chip audio support
-#
+CONFIG_SND_GAMECUBE_MIC=m
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -801,6 +778,7 @@
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -811,13 +789,12 @@
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -885,6 +862,7 @@
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -909,8 +887,10 @@
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
@@ -920,22 +900,36 @@
 CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set

Update of /cvsroot/gc-linux/linux/sound/ppc
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/sound/ppc

Modified Files:
	Kconfig 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


Index: Kconfig
===================================================================
RCS file: /cvsroot/gc-linux/linux/sound/ppc/Kconfig,v
retrieving revision 1.15
retrieving revision 1.16
diff -u -d -r1.15 -r1.16
--- Kconfig	26 Mar 2008 20:02:32 -0000	1.15
+++ Kconfig	15 Nov 2008 20:10:15 -0000	1.16
@@ -1,17 +1,17 @@
 # ALSA PowerMac drivers
 
-menu "ALSA PowerMac devices"
-	depends on SND!=n && PPC
-
-comment "ALSA PowerMac requires I2C"
-	depends on SND && I2C=n
+menuconfig SND_PPC
+	bool "PowerPC sound devices"
+	depends on PPC64 || PPC32
+	default y
+	help
+	  Support for sound devices specific to PowerPC architectures.
 
-comment "ALSA PowerMac requires INPUT"
-	depends on SND && INPUT=n
+if SND_PPC
 
 config SND_POWERMAC
 	tristate "PowerMac (AWACS, DACA, Burgundy, Tumbler, Keywest)"
-	depends on SND && I2C && INPUT && PPC_PMAC
+	depends on I2C && INPUT && PPC_PMAC
 	select SND_PCM
 	help
 	  Say Y here to include support for the integrated sound device.
@@ -32,14 +32,9 @@
 	  Note that you can turn on/off DRC manually even without this
 	  option.
 
-endmenu
-
-menu "ALSA PowerPC devices"
-	depends on SND!=n && ( PPC64 || PPC32 )
-
 config SND_PS3
 	tristate "PS3 Audio support"
-	depends on SND && PS3_PS3AV
+	depends on PS3_PS3AV
 	select SND_PCM
 	default m
 	help
@@ -58,7 +53,7 @@
 	depends on SND && GAMECUBE_COMMON
 	help
 	  Say Y here to include support for audio on the Nintendo GameCube/Wii.
-
+	  
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-gcn.
 
@@ -71,4 +66,4 @@
 	  
 	  If in doubt, say N here.
 
-endmenu
+endif	# SND_PPC

Update of /cvsroot/gc-linux/linux/drivers
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/drivers

Modified Files:
	Makefile 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


Index: Makefile
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/Makefile,v
retrieving revision 1.25
retrieving revision 1.26
diff -u -d -r1.25 -r1.26
--- Makefile	14 Sep 2008 19:20:28 -0000	1.25
+++ Makefile	15 Nov 2008 20:10:14 -0000	1.26
@@ -5,7 +5,7 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-obj-$(CONFIG_HAVE_GPIO_LIB)	+= gpio/
+obj-y				+= gpio/
 obj-$(CONFIG_PCI)		+= pci/
 obj-$(CONFIG_PARISC)		+= parisc/
 obj-$(CONFIG_RAPIDIO)		+= rapidio/
@@ -22,6 +22,9 @@
 # default.
 obj-y				+= char/
 
+# gpu/ comes after char for AGP vs DRM startup
+obj-y				+= gpu/
+
 obj-$(CONFIG_CONNECTOR)		+= connector/
 
 # i810fb and intelfb depend on char/agp/
@@ -54,6 +57,7 @@
 obj-$(CONFIG_PARIDE) 		+= block/paride/
 obj-$(CONFIG_TC)		+= tc/
 obj-$(CONFIG_USB)		+= usb/
+obj-$(CONFIG_USB_MUSB_HDRC)	+= usb/musb/
 obj-$(CONFIG_PCI)		+= usb/
 obj-$(CONFIG_USB_GADGET)	+= usb/gadget/
 obj-$(CONFIG_SERIO)		+= input/serio/
@@ -96,3 +100,4 @@
 obj-$(CONFIG_OF)		+= of/
 obj-$(CONFIG_SSB)		+= ssb/
 obj-$(CONFIG_VIRTIO)		+= virtio/
+obj-$(CONFIG_REGULATOR)		+= regulator/

Update of /cvsroot/gc-linux/linux/arch/powerpc
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/arch/powerpc

Modified Files:
	Kconfig Kconfig.debug 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


Index: Kconfig
===================================================================
RCS file: /cvsroot/gc-linux/linux/arch/powerpc/Kconfig,v
retrieving revision 1.4
retrieving revision 1.5
diff -u -d -r1.4 -r1.5
--- Kconfig	14 Sep 2008 19:20:17 -0000	1.4
+++ Kconfig	15 Nov 2008 20:10:13 -0000	1.5
@@ -53,6 +53,9 @@
 	bool
 	default y
 
+config HAVE_LATENCYTOP_SUPPORT
+	def_bool y
+
 config TRACE_IRQFLAGS_SUPPORT
 	bool
 	depends on PPC64
@@ -105,11 +108,20 @@
 config PPC
 	bool
 	default y
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FTRACE
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_IDE
-	select HAVE_OPROFILE
+	select HAVE_IOREMAP_PROT
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select HAVE_KPROBES
+	select HAVE_ARCH_KGDB
 	select HAVE_KRETPROBES
+	select HAVE_ARCH_TRACEHOOK
 	select HAVE_LMB
+	select HAVE_DMA_ATTRS if PPC64
+	select USE_GENERIC_SMP_HELPERS if SMP
+	select HAVE_OPROFILE
 
 config EARLY_PRINTK
 	bool
@@ -192,7 +204,7 @@
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200
+	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx
 
 config PPC_DCR_NATIVE
 	bool
@@ -308,8 +320,8 @@
 	  strongly in flux, so no good recommendation can be made.
 
 config CRASH_DUMP
-	bool "Build a kdump crash kernel (EXPERIMENTAL)"
-	depends on PPC_MULTIPLATFORM && PPC64 && EXPERIMENTAL
+	bool "Build a kdump crash kernel"
+	depends on PPC_MULTIPLATFORM && PPC64
 	help
 	  Build a kernel suitable for use as a kdump capture kernel.
 	  The kernel will be linked at a different address than normal, and
@@ -458,6 +470,19 @@
 	  some command-line options at build time by entering them here.  In
 	  most cases you will need to specify the root device here.
 
+config EXTRA_TARGETS
+	string "Additional default image types"
+	help
+	  List additional targets to be built by the bootwrapper here (separated
+	  by spaces).  This is useful for targets that depend of device tree
+	  files in the .dts directory.
+
+	  Targets in this list will be build as part of the default build
+	  target, or when the user does a 'make zImage' or a
+	  'make zImage.initrd'.
+
+	  If unsure, leave blank
+
 if !44x || BROKEN
 config ARCH_WANTS_FREEZER_CONTROL
 	def_bool y
@@ -538,15 +563,25 @@
 	help
 	  Freescale Localbus support
 
+config FSL_GTM
+	bool
+	depends on PPC_83xx || QUICC_ENGINE || CPM2
+	help
+	  Freescale General-purpose Timers support
+
 # Yes MCA RS/6000s exist but Linux-PPC does not currently support any
 config MCA
 	bool
 
+# Platforms that what PCI turned unconditionally just do select PCI
+# in their config node.  Platforms that want to choose at config
+# time should select PPC_PCI_CHOICE
+config PPC_PCI_CHOICE
+	bool
+
 config PCI
-	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
-		|| PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \
-		|| PPC_PS3 || 44x
-	default y if !40x && !CPM2 && !8xx && !PPC_MPC512x && !PPC_83xx \
+	bool "PCI support" if PPC_PCI_CHOICE
+	default y if !40x && !CPM2 && !8xx && !PPC_83xx \
 		&& !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON
 	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx
 	default PCI_QSPAN if !4xx && !CPM2 && 8xx
@@ -812,6 +847,7 @@
 config PPC_CLOCK
 	bool
 	default n
+	select HAVE_CLK
 
 config PPC_LIB_RHEAP
 	bool

Index: Kconfig.debug
===================================================================
RCS file: /cvsroot/gc-linux/linux/arch/powerpc/Kconfig.debug,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -d -r1.3 -r1.4
--- Kconfig.debug	14 Sep 2008 19:20:23 -0000	1.3
+++ Kconfig.debug	15 Nov 2008 20:10:14 -0000	1.4
@@ -41,52 +41,19 @@
 	  This option will add a small amount of overhead to all hypervisor
 	  calls.
 
-config DEBUGGER
-	bool "Enable debugger hooks"
+config CODE_PATCHING_SELFTEST
+	bool "Run self-tests of the code-patching code."
 	depends on DEBUG_KERNEL
-	help
-	  Include in-kernel hooks for kernel debuggers. Unless you are
-	  intending to debug the kernel, say N here.
-
-config KGDB
-	bool "Include kgdb kernel debugger"
-	depends on DEBUGGER && (BROKEN || PPC_GEN550 || 4xx)
-	select DEBUG_INFO
-	help
-	  Include in-kernel hooks for kgdb, the Linux kernel source level
-	  debugger.  See <http://kgdb.sourceforge.net/> for more information.
-	  Unless you are intending to debug the kernel, say N here.
-
-choice
-	prompt "Serial Port"
-	depends on KGDB
-	default KGDB_TTYS1
-
-config KGDB_TTYS0
-	bool "ttyS0"
-
-config KGDB_TTYS1
-	bool "ttyS1"
-
-config KGDB_TTYS2
-	bool "ttyS2"
-
-config KGDB_TTYS3
-	bool "ttyS3"
-
-endchoice
+	default n
 
-config KGDB_CONSOLE
-	bool "Enable serial console thru kgdb port"
-	depends on KGDB && 8xx || CPM2
-	help
-	  If you enable this, all serial console messages will be sent
-	  over the gdb stub.
-	  If unsure, say N.
+config FTR_FIXUP_SELFTEST
+	bool "Run self-tests of the feature-fixup code."
+	depends on DEBUG_KERNEL
+	default n
 
 config XMON
 	bool "Include xmon kernel debugger"
-	depends on DEBUGGER
+	depends on DEBUG_KERNEL
 	help
 	  Include in-kernel hooks for the xmon kernel monitor/debugger.
 	  Unless you are intending to debug the kernel, say N here.
@@ -116,6 +83,11 @@
 	  to say Y here, unless you're building for a memory-constrained
 	  system.
 
+config DEBUGGER
+	bool
+	depends on KGDB || XMON
+	default y
+
 config IRQSTACKS
 	bool "Use separate kernel stacks when processing interrupts"
 	help
@@ -125,7 +97,7 @@
 
 config VIRQ_DEBUG
 	bool "Expose hardware/virtual IRQ mapping via debugfs"
-	depends on DEBUG_FS && PPC_MERGE
+	depends on DEBUG_FS
 	help
 	  This option will show the mapping relationship between hardware irq
 	  numbers and virtual irq numbers. The mapping is exposed via debugfs

Update of /cvsroot/gc-linux/linux/include/linux
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/include/linux

Modified Files:
	fb.h 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


Index: fb.h
===================================================================
RCS file: /cvsroot/gc-linux/linux/include/linux/fb.h,v
retrieving revision 1.29
retrieving revision 1.30
diff -u -d -r1.29 -r1.30
--- fb.h	14 Sep 2008 19:20:32 -0000	1.29
+++ fb.h	15 Nov 2008 20:10:15 -0000	1.30
@@ -8,7 +8,6 @@
 
 /* Definitions of frame buffers						*/
 
-#define FB_MAJOR		29
 #define FB_MAX			32	/* sufficient for now */
 
 /* ioctls
@@ -125,6 +124,10 @@
 #define FB_ACCEL_XGI_VOLARI_V	47	/* XGI Volari V3XT, V5, V8      */
 #define FB_ACCEL_XGI_VOLARI_Z	48	/* XGI Volari Z7                */
 #define FB_ACCEL_OMAP1610	49	/* TI OMAP16xx                  */
+#define FB_ACCEL_TRIDENT_TGUI	50	/* Trident TGUI			*/
+#define FB_ACCEL_TRIDENT_3DIMAGE 51	/* Trident 3DImage		*/
+#define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
+#define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
 #define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
 #define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
 #define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
@@ -984,6 +987,9 @@
 
 /* drivers/video/fb_defio.c */
 extern void fb_deferred_io_init(struct fb_info *info);
+extern void fb_deferred_io_open(struct fb_info *info,
+				struct inode *inode,
+				struct file *file);
 extern void fb_deferred_io_cleanup(struct fb_info *info);
 extern int fb_deferred_io_fsync(struct file *file, struct dentry *dentry,
 				int datasync);

Update of /cvsroot/gc-linux/linux/drivers/usb/host
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/drivers/usb/host

Modified Files:
	Kconfig rvl-sthcd.c 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


Index: Kconfig
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/usb/host/Kconfig,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -d -r1.3 -r1.4
--- Kconfig	14 Sep 2008 19:20:31 -0000	1.3
+++ Kconfig	15 Nov 2008 20:10:15 -0000	1.4
@@ -308,7 +308,7 @@
 
 config USB_WII_HCD
 	tristate "Nintendo Wii HCD support"
-	depends on USB && WII && EXPERIMENTAL
+	depends on USB && WII && !HIGHMEM && EXPERIMENTAL
 	help
 	  The Nintendo Wii includes a USB 1.1 host controller that can be
 	  accessed through the API provided by the starlet subsystem.

Index: rvl-sthcd.c
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/usb/host/rvl-sthcd.c,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -d -r1.2 -r1.3
--- rvl-sthcd.c	13 Sep 2008 19:42:57 -0000	1.2
+++ rvl-sthcd.c	15 Nov 2008 20:10:15 -0000	1.3
@@ -20,6 +20,10 @@
  *
  */
 
+#ifdef CONFIG_HIGHMEM
+#error Sorry, this driver cannot currently work if HIGHMEM is y
+#endif
+
 #define DBG(fmt, arg...)	drv_printk(KERN_DEBUG, fmt, ##arg)
 
 #include <linux/device.h>
@@ -73,6 +77,9 @@
  */
 #define STHCD_MAX_CHUNK_SIZE	(2048)
 
+#define STHCD_PORT_MAX_RESETS	2	/* maximum number of consecutive
+					 * allowed for a port */
+#define STHCD_RESCAN_INTERVAL	5	/* seconds */
 
 #define starlet_ioh_sg_entry(sg, ptr) \
 	starlet_ioh_sg_set_buf((sg), (ptr), sizeof(*(ptr)))
@@ -82,31 +89,21 @@
 struct sthcd_port;
 struct sthcd_oh;
 
-enum {
-	__STHCD_UDEV_REOPEN = 0,
-	__STHCD_UDEV_ISAHUB,
-};
-
 /*
  * starlet USB device abstraction (udev).
  *
  */
 struct sthcd_udev {
-	unsigned long flags;
-#define STHCD_UDEV_ISAHUB	(1 << __STHCD_UDEV_ISAHUB)
-	/* REVISIT, not finally used */
-#define STHCD_UDEV_REOPEN	(1 << __STHCD_UDEV_REOPEN)
-
 	u16 idVendor;
 	u16 idProduct;
-	int fd;
+	int fd;				/* starlet file descriptor */
 
 	u16 devnum;			/* USB address set by kernel */
 
 	struct list_head node;		/* in list of connected devices */
-	struct sthcd_oh *oh;
+	struct sthcd_oh *oh;		/* parent Open Host controller */
 
-	struct list_head pep_list;	/* list of peps */
+	struct list_head pep_list;	/* list of private endpoints */
 };
 
 /*
@@ -121,6 +118,7 @@
 
 enum {
 	__STHCD_PORT_INUSE = 0,
+	__STHCD_PORT_DOOMED,
 };
 
 
@@ -131,8 +129,10 @@
 struct sthcd_port {
 	unsigned long flags;
 #define STHCD_PORT_INUSE	(1 << __STHCD_PORT_INUSE)
+#define STHCD_PORT_DOOMED	(1 << __STHCD_PORT_DOOMED)
 
 	u32 status_change;
+	unsigned nr_resets;
 
 	struct sthcd_udev udev;	/* one udev per port */
 };
@@ -143,14 +143,14 @@
  */
 struct sthcd_oh {
 	unsigned int index;
-	int fd;
+	int fd;					/* starlet file descriptor */
 
 	unsigned int max_devids;
 	struct sthcd_devid *new_devids;
 	struct sthcd_devid *devids;
-	unsigned int nr_devids;
+	unsigned int nr_devids;			/* actual no of devices */
 
-	struct sthcd_hcd *hcd;
+	struct sthcd_hcd *hcd;			/* parent Host Controller */
 };
 
 /*
@@ -162,11 +162,12 @@
 
 	struct sthcd_oh oh[2];
 
-	struct sthcd_port *ports;
+	struct sthcd_port *ports;	/* array of ports */
 	unsigned int nr_ports;
+
 	struct list_head device_list;	/* list of connected devices */
 
-	wait_queue_head_t rescan_waitq;
+	wait_queue_head_t rescan_waitq;	/* wait queue for the rescan task */
 	struct task_struct *rescan_task;
 };
 
@@ -224,8 +225,6 @@
 	void *io_buf;			/* data buffer */
 	size_t io_buf_len;		/* length of io_buf */
 
-	unsigned long serial;		/* transfer serial number */
-
 	int request;			/* ioctlv request */
 	union {
 		struct sthcd_bulk_intr_xfer_ctx *bulk_intr;
@@ -243,6 +242,7 @@
  *
  */
 
+#if 0
 static inline void print_buffer(void *buf, u32 size)
 {
 	int i;
@@ -253,7 +253,7 @@
 			);
 	}
 }
-
+#endif
 
 /*
  * Type conversion routines.
@@ -570,7 +570,7 @@
 	int error = 0;
 
 	if (!pep_is_enabled(pep)) {
-		error = -ENOSPC;
+		error = -ESHUTDOWN;
 		goto done;
 	}
 
@@ -647,7 +647,6 @@
  */
 static int sthcd_pep_setup_xfer(struct sthcd_pep *pep)
 {
-	static atomic_t serial;
 	struct urb *urb = pep->urb;
 	int request;
 	int error = 0;
@@ -674,9 +673,6 @@
 		pep->request = request;
 		starlet_ioh_sg_set_buf(&pep->io[0],
 					pep->io_buf, pep->io_buf_len);
-
-		atomic_inc(&serial);
-		pep->serial = atomic_read(&serial);
 	}
 
 	if (error < 0)
@@ -758,8 +754,9 @@
 	 */
 	if (usb_urb_dir_in(urb)) {
 		/* device -> host */
+		BUG_ON(!urb->transfer_buffer);
 		memcpy(urb->transfer_buffer + pep->io_xfer_offset,
-		       pep->io_buf, xfer_len);
+			       pep->io_buf, xfer_len);
 	}
 
 	pep->io_xfer_offset += xfer_len;
@@ -789,7 +786,7 @@
 	}
 
 	if (!pep_is_enabled(pep)) {
-		error = -ENOSPC;
+		error = -ESHUTDOWN;
 		goto done;
 	}
 
@@ -797,11 +794,13 @@
 	if (pep->io_buf_len > 0) {
 		if (usb_urb_dir_out(urb)) {
 			/* host -> device */
+			BUG_ON(!urb->transfer_buffer);
 			memcpy(pep->io_buf,
 			       urb->transfer_buffer + pep->io_xfer_offset,
 			       pep->io_buf_len);
 		}
 	}
+
 	starlet_ioh_sg_set_buf(&pep->io[0],
 				pep->io_buf, pep->io_buf_len);
 
@@ -827,9 +826,6 @@
 __releases(sthcd->lock) __acquires(sthcd->lock)
 {
 	struct usb_hcd *hcd = sthcd_to_hcd(sthcd);
-
-	if (status < 0)
-		DBG("%s: urb %p: status = %d\n", __func__, urb, status);
 	
 	/*
 	 * Release the hcd lock here as the callback may need to
@@ -889,12 +885,31 @@
  */
 static int sthcd_pep_send_urb(struct sthcd_pep *pep, struct urb *urb)
 {
+	struct sthcd_port *port = NULL;
+	struct sthcd_hcd *sthcd;
 	struct usb_ctrlrequest *req;
 	u16 typeReq, wValue;
 	int retval, fake;
 	int error;
 
+	/*
+	 * Unconditionally fail urbs targetted at doomed ports.
+	 */
+	if (pep->udev) {
+		port = udev_to_port(pep->udev);
+		if (test_bit(__STHCD_PORT_DOOMED, &port->flags)) {
+			error = -ENODEV;
+			goto done;
+		}
+	}
+
 	if (test_and_set_bit(__STHCD_PEP_XFERBUSY, &pep->flags)) {
+		/*
+		 * There is a pep xfer in progress.
+		 * Our urb is already queued on the usb device, so do nothing
+		 * here and rely on the pep xfer callback to do the actual
+		 * work when it's done with the current urb in flight.
+		 */
 		error = 0;
 		goto done;
 	}
@@ -926,9 +941,23 @@
 					   "address change %u->%u\n",
 					   urb->dev->devnum, wValue);
 	                }
-			/* we have an udev because the takein was successful */
+			/*
+			 * We are guaranteed to have an udev because the takein
+			 * was successful.
+			 */
 	                pep->udev->devnum = wValue;
 			urb->actual_length = 0;
+
+			/* clear the port reset count, we have an address */
+			if (wValue) {
+				/*
+				 * We need to retrieve the port again
+				 * as we might have entered the function
+				 * without an udev assigned to the pep.
+				 */
+				port = udev_to_port(pep->udev);
+				port->nr_resets = 0;
+			}
 			fake = 1;
 			break;
 		default:
@@ -937,9 +966,10 @@
 	}
 
 	if (fake) {
+		sthcd = pep->sthcd;
 		/* finish this fake urb synchronously... */
-		usb_hcd_unlink_urb_from_ep(sthcd_to_hcd(pep->sthcd), urb);
-		sthcd_giveback_urb(pep->sthcd, urb, 0);
+		usb_hcd_unlink_urb_from_ep(sthcd_to_hcd(sthcd), urb);
+		sthcd_giveback_urb(sthcd, urb, 0);
 		/* ... and proceed with the next urb, if applicable */
 		sthcd_pep_cond_send_next_urb(pep);
 	} else {
@@ -970,9 +1000,21 @@
 
 static void sthcd_pep_print(struct sthcd_pep *pep)
 {
-	DBG("%s: req %lu: io_buf=%p, io_buf_len=%u, io_xfer_offset=%u\n",
-		__func__,
-		pep->serial,
+	struct usb_device *udev;
+	u16 idVendor, idProduct;
+
+	idVendor = idProduct = 0xffff;
+	if (pep->urb) {
+		udev = pep->urb->dev;
+		if (udev) {
+			idVendor = le16_to_cpu(udev->descriptor.idVendor);
+			idProduct = le16_to_cpu(udev->descriptor.idProduct);
+		}
+	}
+	DBG("(%04X:%04X) request=%d,"
+	    " io_buf=%p, io_buf_len=%u, io_xfer_offset=%u\n",
+		idVendor, idProduct,
+		pep->request,
 		pep->io_buf,
 		pep->io_buf_len,
 		pep->io_xfer_offset);
@@ -987,6 +1029,7 @@
 	int xfer_len = req->result;
 	struct sthcd_pep *pep = req->done_data;
 	int status = 0;
+	struct sthcd_port *port;
 	struct sthcd_hcd *sthcd;
 	struct usb_hcd *hcd;
 	struct urb *urb;
@@ -1004,10 +1047,9 @@
 
 	urb = pep->urb;
 	if (!urb) {
-		/* urb was already dequeued */
-		drv_printk(KERN_INFO, "pep %p: request %lu already dequeued\n",
-			   pep, pep->serial);
 		/*
+		 * starlet completed an URB that was already dequeued.
+		 *
 		 * We must free here the memory used by the pep, including
 		 * I/O buffers, avoiding dereferencing any USB stack data
 		 * pointed by the pep, as it may be invalid now.
@@ -1022,28 +1064,42 @@
 		status = xfer_len;
 		xfer_len = 0;
 
-		if (status != -7004 && status != 7003) {
-			drv_printk(KERN_ERR, "req %lu: completed with"
-				   " error %d\n", pep->serial, status);
+		if (status != -7004 && status != -7003) {
+			drv_printk(KERN_ERR, "request completed"
+				   " with error %d\n", status);
+			sthcd_pep_print(pep);
 		}
 
 		switch(status) {
-		case -7005:
-			status = -ESHUTDOWN;
-			break;
 		case -7003:
 		case -7004:
 			/* endpoint stall */
 			status = -EPIPE;
 			break;
+		case -7005:
+			/* endpoint shutdown? */
+			status = -ESHUTDOWN;
+			break;
 		case -7008:
+		case -7022:
 		case -4:
-			set_bit(__STHCD_PEP_DISABLED, &pep->flags);
 			/* FALL-THROUGH */
 		default:
-			status = -EPIPE;
+			/*
+			 * We got an unknown, probably un-retryable, error.
+			 * Flag the port as unuseable. The associated
+			 * device will be disconnected ASAP.
+			 */
+			port = udev_to_port(pep->udev);
+			set_bit(__STHCD_PORT_DOOMED, &port->flags);
+			DBG("%s: error %d on port %d, doomed!\n", __func__,
+			    status, port - pep->sthcd->ports + 1);
+
+			/* also, do not use the pep for xfers anymore */
+			set_bit(__STHCD_PEP_DISABLED, &pep->flags);
+			status = -ENODEV;
+			break;
 		}
-		sthcd_pep_print(pep);
 	} else {
 		if (usb_pipecontrol(urb->pipe)) {
 			/*
@@ -1054,10 +1110,9 @@
 			 */
 			xfer_len -= sizeof(struct usb_ctrlrequest);
 			if (xfer_len < 0) {
-				drv_printk(KERN_ERR, "request %lu"
-					   " incomplete,"
+				drv_printk(KERN_ERR, "request incomplete,"
 					   " %d bytes short\n",
-					   pep->serial, -xfer_len);
+					   -xfer_len);
 				status = -EPIPE;
 				xfer_len = 0;
 			}
@@ -1414,20 +1469,32 @@
 
 	switch (typeReq) {
 	case GetPortStatus:	/* 0xA300 */
+		if (test_bit(__STHCD_PORT_DOOMED, &port->flags)) {
+			/* disconnect */
+			if (!!(port->status_change & USB_PORT_STAT_CONNECTION))
+				port->status_change |= 
+					(USB_PORT_STAT_C_CONNECTION<<16);
+			port->status_change &= ~USB_PORT_STAT_CONNECTION;
+		}
 		/* REVISIT wait 50ms before clearing the RESET state */
 		if (port->status_change & USB_PORT_STAT_RESET) {
-			spin_unlock_irqrestore(&sthcd->lock, flags);
-			
-			spin_lock_irqsave(&sthcd->lock, flags);
-			port->status_change = (USB_PORT_STAT_POWER |
-						USB_PORT_STAT_ENABLE |
-						USB_PORT_STAT_C_RESET << 16);
+			port->nr_resets++;
+			if (port->nr_resets > 2) {
+				DBG("%s: port %d was reset %u time(s),"
+				    " doomed!\n", __func__,
+				    wIndex+1, port->nr_resets);
+				set_bit(__STHCD_PORT_DOOMED, &port->flags);
+			}
+			if (!(port->status_change & USB_PORT_STAT_ENABLE))
+				port->status_change |= 
+						(USB_PORT_STAT_C_ENABLE << 16);
+			port->status_change &= ~USB_PORT_STAT_RESET;
+			port->status_change |= (USB_PORT_STAT_ENABLE |
+						(USB_PORT_STAT_C_RESET << 16));
 			port->udev.devnum = 0;
 		}
-		if (port->udev.oh)
-			port->status_change |= USB_PORT_STAT_CONNECTION;
-		((__le32 *) buf)[0] = cpu_to_le32(port->status_change);
 		retval = 4;
+		((__le32 *) buf)[0] = cpu_to_le32(port->status_change);
 		break;
 	case ClearPortFeature:	/* 0x2301 */
 		switch (wValue) {
@@ -1527,20 +1594,40 @@
 static int sthcd_hub_status_data(struct usb_hcd *hcd, char *buf)
 {
 	struct sthcd_hcd *sthcd = hcd_to_sthcd(hcd);
-	struct sthcd_port *port;
 	u16 *p = (u16 *)buf;
-	int i;
+	struct sthcd_port *port;
+	unsigned long flags;
+	int i, result;
+
+	if (!HC_IS_RUNNING(hcd->state))
+		return -ESHUTDOWN;
+
+#if 0
+	if (timer_pending(&hcd->rh_timer))
+		return 0;
+#endif
 
 	/* FIXME, this code assumes at least 9 and no more than 15 ports */
 	BUG_ON(sthcd->nr_ports > 15 || sthcd->nr_ports < 8);
 
+	spin_lock_irqsave(&sthcd->lock, flags);
+
 	port = sthcd->ports;
 	for(i = 0, *p = 0; i < sthcd->nr_ports; i++, port++) {
-		if ((port->status_change & 0xffff0000) != 0)
+		if ((port->status_change & 0xffff0000) != 0) {
 			*p |= 1 << (i+1);
+			/* REVISIT */
+			//break;
+		}
 	}
 	*p = le16_to_cpu(*p);
-	return (*p != 0)?2:0;
+	result = (*p != 0)?2:0;
+
+	spin_unlock_irqrestore(&sthcd->lock, flags);
+
+//	DBG("%s: poll cycle, changes=%04x\n", __func__, *p);
+
+	return result;
 }
 
 
@@ -1552,11 +1639,16 @@
 static int sthcd_oh_insert_udev(struct sthcd_oh *oh,
 				u16 idVendor, u16 idProduct)
 {
+	struct sthcd_hcd *sthcd = oh->hcd;
 	struct sthcd_udev *udev;
 	struct sthcd_port *port;
+	unsigned long flags;
 	int error;
+	
+	drv_printk(KERN_INFO, "inserting device %04X.%04X\n",
+		   idVendor, idProduct);
 
-	udev = sthcd_get_free_udev(oh->hcd);
+	udev = sthcd_get_free_udev(sthcd);
 	if (!udev) {
 		drv_printk(KERN_ERR, "no free udevs!\n");
 		return -EBUSY;
@@ -1564,11 +1656,15 @@
 
 	error = sthcd_udev_init(udev, oh, idVendor, idProduct);
 	if (!error) {
+		spin_lock_irqsave(&sthcd->lock, flags);
+
 		port = udev_to_port(udev);
-		/* connect */
-		port->status_change |= (USB_PORT_STAT_CONNECTION |
-					USB_PORT_STAT_C_CONNECTION << 16);
-		usb_hcd_poll_rh_status(sthcd_to_hcd(oh->hcd));
+		/* notify a connection event */
+		port->status_change = USB_PORT_STAT_POWER |
+					USB_PORT_STAT_CONNECTION |
+					(USB_PORT_STAT_C_CONNECTION<<16);
+
+		spin_unlock_irqrestore(&sthcd->lock, flags);
 	}
 	return error;
 }
@@ -1576,24 +1672,35 @@
 static int sthcd_oh_remove_udev(struct sthcd_oh *oh,
 				u16 idVendor, u16 idProduct)
 {
+	struct sthcd_hcd *sthcd = oh->hcd;
 	struct sthcd_udev *udev;
 	struct sthcd_port *port;
+	u32 old_status;
+	unsigned long flags;
 	int error = 0;
 
-	udev = sthcd_find_udev_by_ids(oh->hcd, idVendor, idProduct);
+	udev = sthcd_find_udev_by_ids(sthcd, idVendor, idProduct);
 	if (!udev) {
 		/* normally reached for ignored hubs */
 		error = -ENODEV;
 	} else {
+		drv_printk(KERN_INFO, "removing device %04X.%04X\n",
+			   idVendor, idProduct);
 		sthcd_udev_exit(udev);
+
+		spin_lock_irqsave(&sthcd->lock, flags);
+
 		port = udev_to_port(udev);
 		clear_bit(__STHCD_PORT_INUSE, &port->flags);
-		/* disconnect */
-		port->status_change = (USB_PORT_STAT_POWER |
-					USB_PORT_STAT_RESET |
-					USB_PORT_STAT_C_RESET << 16);
-		port->status_change |= (USB_PORT_STAT_C_CONNECTION << 16);
-		usb_hcd_poll_rh_status(sthcd_to_hcd(oh->hcd));
+		clear_bit(__STHCD_PORT_DOOMED, &port->flags);
+		port->nr_resets = 0;
+		/* notify a disconnection event */
+		old_status = port->status_change;
+		port->status_change = USB_PORT_STAT_POWER;
+		if ((old_status & USB_PORT_STAT_CONNECTION) != 0)
+			port->status_change |= (USB_PORT_STAT_C_CONNECTION<<16);
+
+		spin_unlock_irqrestore(&sthcd->lock, flags);
 	}
 	return error;
 }
@@ -1779,8 +1886,11 @@
 
 static int sthcd_oh_rescan(struct sthcd_oh *oh)
 {
+	static unsigned int poll_cycles = 0;
+	struct usb_hcd *hcd = sthcd_to_hcd(oh->hcd);
 	struct sthcd_devid *p;
 	int nr_new_devids, i;
+	int changes;
 	int error;
 
 	error = sthcd_get_device_list(oh->hcd, oh->fd, oh->new_devids,
@@ -1789,14 +1899,16 @@
 		return error;
 
 	nr_new_devids = error;
+	changes = 0;
 
 	for(i = 0; i < oh->nr_devids; i++) {
 		p = &oh->devids[i];
 		if (!sthcd_devid_find(oh->new_devids, nr_new_devids, p)) {
 			/* removal */
-			drv_printk(KERN_INFO, "removing device %04X.%04X\n",
-				   p->idVendor, p->idProduct);
-			sthcd_oh_remove_udev(oh, p->idVendor, p->idProduct);
+			error = sthcd_oh_remove_udev(oh, p->idVendor,
+						     p->idProduct);
+			if (!error)
+				changes++;
 		}
 	}
 
@@ -1808,11 +1920,10 @@
 						   p->idProduct);
 			if (error == 0) {
 				/* not a hub, register the usb device */
-				drv_printk(KERN_INFO,
-					   "inserting device %04X.%04X\n",
-					   p->idVendor, p->idProduct);
-				sthcd_oh_insert_udev(oh, p->idVendor,
-						     p->idProduct);
+				error = sthcd_oh_insert_udev(oh, p->idVendor,
+							     p->idProduct);
+				if (!error)
+					changes++;
 			} else {
 				drv_printk(KERN_INFO,
 					   "ignoring hub %04X.%04X\n",
@@ -1824,6 +1935,33 @@
 	memcpy(oh->devids, oh->new_devids, nr_new_devids * sizeof(*p));
 	oh->nr_devids = nr_new_devids;
 
+	/*
+	 * FIXME
+	 * We ask here the USB layer to explicitly poll for root hub changes
+	 * until we get at least two complete rescan cycles without changes.
+	 *
+	 * Otherwise, for unknown reasons, we end up missing the detection of
+	 * some devices, even if the insertion/removal of these devices is
+	 * properly signaled in port->status_change.
+	 */
+	if (changes) {
+#if 1
+		if (!poll_cycles) {
+			hcd->poll_rh = 1;
+			usb_hcd_poll_rh_status(hcd);
+		}
+		poll_cycles = 2;
+	} else {
+		if (!poll_cycles) {
+			hcd->poll_rh = 0;
+		} else {
+			poll_cycles--;
+		}
+#else
+		usb_hcd_poll_rh_status(hcd);
+#endif
+	}
+
 	return 0;
 }
 
@@ -1868,22 +2006,6 @@
 	oh->devids = NULL;
 }
 
-#if 0
-static void sthcd_oh_cond_reopen(struct sthcd_oh *oh)
-{
-	struct sthcd_hcd *sthcd = oh->hcd;
-	struct sthcd_udev *udev;
-
-	list_for_each_entry(udev, &sthcd->device_list, node) {
-		if (test_and_clear_bit(__STHCD_UDEV_REOPEN, &udev->flags)) {
-			sthcd_udev_open(udev);
-			sthcd_udev_resume(udev);
-			sthcd_udev_suspend(udev);
-		}
-	}
-}
-#endif
-
 static int sthcd_rescan_thread(void *arg)
 {
 	struct sthcd_hcd *sthcd = arg;
@@ -1902,10 +2024,9 @@
 	while(!kthread_should_stop()) {
 		sthcd_oh_rescan(oh);
 
-		/* sthcd_oh_cond_reopen(oh); */
-
-		/* re-check every 5 seconds */
-		sleep_on_timeout(&sthcd->rescan_waitq, 5*HZ);
+		/* re-check again after the configured interval */
+		sleep_on_timeout(&sthcd->rescan_waitq,
+				 STHCD_RESCAN_INTERVAL*HZ);
 	}
 	return 0;
 }
@@ -2046,8 +2167,6 @@
 	ep = urb->ep;
 	pep = ep_to_pep(ep);
 	if (pep && pep->urb == urb) {
-		DBG("%s: (pep %p, sn %lu, urb %p) urb in transit!\n", __func__,
-		    pep, pep->serial, urb);
 		/*
 		 * There is an urb in flight.
 		 *
@@ -2065,8 +2184,10 @@
 done:
 	spin_unlock_irqrestore(&sthcd->lock, flags);
 
+#if 0
 	if (error < 0)
 		DBG("%s: error=%d (%x)\n", __func__, error, error);
+#endif
 	return error;
 }
 
@@ -2090,7 +2211,7 @@
 		 *
 		 * Disable the private endpoint and take the urb out of it.
 		 * The callback function will take care of freeing the pep
-		 * when the IOS call completes.
+		 * when the starlet call completes.
 		 */
 		set_bit(__STHCD_PEP_DISABLED, &pep->flags);
 		sthcd_pep_takeout_urb(pep);

Update of /cvsroot/gc-linux/linux/drivers/usb
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/drivers/usb

Modified Files:
	Kconfig 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


Index: Kconfig
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/usb/Kconfig,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -d -r1.2 -r1.3
--- Kconfig	13 Sep 2008 19:42:57 -0000	1.2
+++ Kconfig	15 Nov 2008 20:10:15 -0000	1.3
@@ -96,16 +96,18 @@
 
 source "drivers/usb/core/Kconfig"
 
+source "drivers/usb/mon/Kconfig"
+
 source "drivers/usb/host/Kconfig"
 
+source "drivers/usb/musb/Kconfig"
+
 source "drivers/usb/class/Kconfig"
 
 source "drivers/usb/storage/Kconfig"
 
 source "drivers/usb/image/Kconfig"
 
-source "drivers/usb/mon/Kconfig"
-
 comment "USB port drivers"
 	depends on USB

Update of /cvsroot/gc-linux/linux/arch/ppc/configs
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/arch/ppc/configs

Removed Files:
	gamecube_defconfig 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


--- gamecube_defconfig DELETED ---

Update of /cvsroot/gc-linux/linux/arch/ppc
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/arch/ppc

Removed Files:
	Kconfig 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


--- Kconfig DELETED ---

Update of /cvsroot/gc-linux/linux/arch/powerpc/mm
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/arch/powerpc/mm

Added Files:
	pgtable_32.c 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


--- NEW FILE: pgtable_32.c ---
/*
 * This file contains the routines setting up the linux page tables.
 *  -- paulus
 *
 *  Derived from arch/ppc/mm/init.c:
 *    Copyright (C) 1995-1996 Gary Thomas (gdt@...)
 *
 *  Modifications by Paul Mackerras (PowerMac) (paulus@...)
 *  and Cort Dougan (PReP) (cort@...)
 *    Copyright (C) 1996 Paul Mackerras
 *
 *  Derived from "arch/i386/mm/init.c"
 *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
 *
 *  This program is free software; you can redistribute it and/or
 *  modify it under the terms of the GNU General Public License
 *  as published by the Free Software Foundation; either version
 *  2 of the License, or (at your option) any later version.
 *
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/highmem.h>

#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/fixmap.h>
#include <asm/io.h>

#include "mmu_decl.h"

unsigned long ioremap_base;
unsigned long ioremap_bot;
EXPORT_SYMBOL(ioremap_bot);	/* aka VMALLOC_END */

#if defined(CONFIG_6xx) || defined(CONFIG_POWER3)
#define HAVE_BATS	1
#endif

#if defined(CONFIG_FSL_BOOKE)
#define HAVE_TLBCAM	1
#endif

extern char etext[], _stext[];

#ifdef CONFIG_SMP
extern void hash_page_sync(void);
#endif

#ifdef HAVE_BATS
extern phys_addr_t v_mapped_by_bats(unsigned long va);
extern unsigned long p_mapped_by_bats(phys_addr_t pa);
void setbat(int index, unsigned long virt, phys_addr_t phys,
	    unsigned int size, int flags);

#else /* !HAVE_BATS */
#define v_mapped_by_bats(x)	(0UL)
#define p_mapped_by_bats(x)	(0UL)
#endif /* HAVE_BATS */

#ifdef HAVE_TLBCAM
extern unsigned int tlbcam_index;
extern unsigned long v_mapped_by_tlbcam(unsigned long va);
extern unsigned long p_mapped_by_tlbcam(unsigned long pa);
#else /* !HAVE_TLBCAM */
#define v_mapped_by_tlbcam(x)	(0UL)
#define p_mapped_by_tlbcam(x)	(0UL)
#endif /* HAVE_TLBCAM */

#ifdef CONFIG_PTE_64BIT
/* 44x uses an 8kB pgdir because it has 8-byte Linux PTEs. */
#define PGDIR_ORDER	1
#else
#define PGDIR_ORDER	0
#endif

pgd_t *pgd_alloc(struct mm_struct *mm)
{
	pgd_t *ret;

	ret = (pgd_t *)__get_free_pages(GFP_KERNEL|__GFP_ZERO, PGDIR_ORDER);
	return ret;
}

void pgd_free(struct mm_struct *mm, pgd_t *pgd)
{
	free_pages((unsigned long)pgd, PGDIR_ORDER);
}

__init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
{
	pte_t *pte;
	extern int mem_init_done;
	extern void *early_get_page(void);

	if (mem_init_done) {
		pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
	} else {
		pte = (pte_t *)early_get_page();
		if (pte)
			clear_page(pte);
	}
	return pte;
}

pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
{
	struct page *ptepage;

#ifdef CONFIG_HIGHPTE
	gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT | __GFP_ZERO;
#else
	gfp_t flags = GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO;
#endif

	ptepage = alloc_pages(flags, 0);
	if (!ptepage)
		return NULL;
	pgtable_page_ctor(ptepage);
	return ptepage;
}

void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
{
#ifdef CONFIG_SMP
	hash_page_sync();
#endif
	free_page((unsigned long)pte);
}

void pte_free(struct mm_struct *mm, pgtable_t ptepage)
{
#ifdef CONFIG_SMP
	hash_page_sync();
#endif
	pgtable_page_dtor(ptepage);
	__free_page(ptepage);
}

void __iomem *
ioremap(phys_addr_t addr, unsigned long size)
{
	return __ioremap(addr, size, _PAGE_NO_CACHE | _PAGE_GUARDED);
}
EXPORT_SYMBOL(ioremap);

void __iomem *
ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags)
{
	/* writeable implies dirty for kernel addresses */
	if (flags & _PAGE_RW)
		flags |= _PAGE_DIRTY | _PAGE_HWWRITE;

	/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
	flags &= ~(_PAGE_USER | _PAGE_EXEC | _PAGE_HWEXEC);

	return __ioremap(addr, size, flags);
}
EXPORT_SYMBOL(ioremap_flags);

void __iomem *
__ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
{
	unsigned long v, i;
	phys_addr_t p;
	int err;

	/* Make sure we have the base flags */
	if ((flags & _PAGE_PRESENT) == 0)
		flags |= _PAGE_KERNEL;

	/* Non-cacheable page cannot be coherent */
	if (flags & _PAGE_NO_CACHE)
		flags &= ~_PAGE_COHERENT;

	/*
	 * Choose an address to map it to.
	 * Once the vmalloc system is running, we use it.
	 * Before then, we use space going down from ioremap_base
	 * (ioremap_bot records where we're up to).
	 */
	p = addr & PAGE_MASK;
	size = PAGE_ALIGN(addr + size) - p;

	/*
	 * If the address lies within the first 16 MB, assume it's in ISA
	 * memory space
	 */
	if (p < 16*1024*1024)
		p += _ISA_MEM_BASE;

	/*
	 * Don't allow anybody to remap normal RAM that we're using.
	 * mem_init() sets high_memory so only do the check after that.
	 */
	if (mem_init_done && (p < virt_to_phys(high_memory))) {
		/*
		 * On some systems, though, we may want to remap normal RAM
		 * that we have memreserve'd at the device tree.
		 * But we can't do that safely if we are using BATs.
		 *
		 */
		if (!__map_without_bats) {
			printk("__ioremap(): phys addr 0x%llx is RAM lr %p\n",
			       (unsigned long long)p,
				 __builtin_return_address(0));
			return NULL;
		}
	}

	if (size == 0)
		return NULL;

	/*
	 * Is it already mapped?  Perhaps overlapped by a previous
	 * BAT mapping.  If the whole area is mapped then we're done,
	 * otherwise remap it since we want to keep the virt addrs for
	 * each request contiguous.
	 *
	 * We make the assumption here that if the bottom and top
	 * of the range we want are mapped then it's mapped to the
	 * same virt address (and this is contiguous).
	 *  -- Cort
	 */
	if ((v = p_mapped_by_bats(p)) /*&& p_mapped_by_bats(p+size-1)*/ )
		goto out;

	if ((v = p_mapped_by_tlbcam(p)))
		goto out;

	if (mem_init_done) {
		struct vm_struct *area;
		area = get_vm_area(size, VM_IOREMAP);
		if (area == 0)
			return NULL;
		v = (unsigned long) area->addr;
	} else {
		v = (ioremap_bot -= size);
	}

	/*
	 * Should check if it is a candidate for a BAT mapping
	 */

	err = 0;
	for (i = 0; i < size && err == 0; i += PAGE_SIZE)
		err = map_page(v+i, p+i, flags);
	if (err) {
		if (mem_init_done)
			vunmap((void *)v);
		return NULL;
	}

out:
	return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK));
}
EXPORT_SYMBOL(__ioremap);

void iounmap(volatile void __iomem *addr)
{
	/*
	 * If mapped by BATs then there is nothing to do.
	 * Calling vfree() generates a benign warning.
	 */
	if (v_mapped_by_bats((unsigned long)addr)) return;

	if (addr > high_memory && (unsigned long) addr < ioremap_bot)
		vunmap((void *) (PAGE_MASK & (unsigned long)addr));
}
EXPORT_SYMBOL(iounmap);

int map_page(unsigned long va, phys_addr_t pa, int flags)
{
	pmd_t *pd;
	pte_t *pg;
	int err = -ENOMEM;

	/* Use upper 10 bits of VA to index the first level map */
	pd = pmd_offset(pud_offset(pgd_offset_k(va), va), va);
	/* Use middle 10 bits of VA to index the second-level map */
	pg = pte_alloc_kernel(pd, va);
	if (pg != 0) {
		err = 0;
		/* The PTE should never be already set nor present in the
		 * hash table
		 */
		BUG_ON(pte_val(*pg) & (_PAGE_PRESENT | _PAGE_HASHPTE));
		set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT,
						     __pgprot(flags)));
	}
	return err;
}

/*
 * Map in all of physical memory starting at KERNELBASE.
 */
void __init mapin_ram(void)
{
	unsigned long v, s, f;
	phys_addr_t p;
	int ktext;

	s = mmu_mapin_ram();
	v = KERNELBASE + s;
	p = memstart_addr + s;
	for (; s < total_lowmem; s += PAGE_SIZE) {
		ktext = ((char *) v >= _stext && (char *) v < etext);
		f = ktext ?_PAGE_RAM_TEXT : _PAGE_RAM;
		map_page(v, p, f);
#ifdef CONFIG_PPC_STD_MMU_32
		if (ktext)
			hash_preload(&init_mm, v, 0, 0x300);
#endif
		v += PAGE_SIZE;
		p += PAGE_SIZE;
	}
}

/* Scan the real Linux page tables and return a PTE pointer for
 * a virtual address in a context.
 * Returns true (1) if PTE was found, zero otherwise.  The pointer to
 * the PTE pointer is unmodified if PTE is not found.
 */
int
get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, pmd_t **pmdp)
{
        pgd_t	*pgd;
	pud_t	*pud;
        pmd_t	*pmd;
        pte_t	*pte;
        int     retval = 0;

        pgd = pgd_offset(mm, addr & PAGE_MASK);
        if (pgd) {
		pud = pud_offset(pgd, addr & PAGE_MASK);
		if (pud && pud_present(*pud)) {
			pmd = pmd_offset(pud, addr & PAGE_MASK);
			if (pmd_present(*pmd)) {
				pte = pte_offset_map(pmd, addr & PAGE_MASK);
				if (pte) {
					retval = 1;
					*ptep = pte;
					if (pmdp)
						*pmdp = pmd;
					/* XXX caller needs to do pte_unmap, yuck */
				}
			}
		}
        }
        return(retval);
}

#ifdef CONFIG_DEBUG_PAGEALLOC

static int __change_page_attr(struct page *page, pgprot_t prot)
{
	pte_t *kpte;
	pmd_t *kpmd;
	unsigned long address;

	BUG_ON(PageHighMem(page));
	address = (unsigned long)page_address(page);

	if (v_mapped_by_bats(address) || v_mapped_by_tlbcam(address))
		return 0;
	if (!get_pteptr(&init_mm, address, &kpte, &kpmd))
		return -EINVAL;
	set_pte_at(&init_mm, address, kpte, mk_pte(page, prot));
	wmb();
	flush_HPTE(0, address, pmd_val(*kpmd));
	pte_unmap(kpte);

	return 0;
}

/*
 * Change the page attributes of an page in the linear mapping.
 *
 * THIS CONFLICTS WITH BAT MAPPINGS, DEBUG USE ONLY
 */
static int change_page_attr(struct page *page, int numpages, pgprot_t prot)
{
	int i, err = 0;
	unsigned long flags;

	local_irq_save(flags);
	for (i = 0; i < numpages; i++, page++) {
		err = __change_page_attr(page, prot);
		if (err)
			break;
	}
	local_irq_restore(flags);
	return err;
}


void kernel_map_pages(struct page *page, int numpages, int enable)
{
	if (PageHighMem(page))
		return;

	change_page_attr(page, numpages, enable ? PAGE_KERNEL : __pgprot(0));
}
#endif /* CONFIG_DEBUG_PAGEALLOC */

static int fixmaps;
unsigned long FIXADDR_TOP = 0xfffff000;
EXPORT_SYMBOL(FIXADDR_TOP);

void __set_fixmap (enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags)
{
	unsigned long address = __fix_to_virt(idx);

	if (idx >= __end_of_fixed_addresses) {
		BUG();
		return;
	}

	map_page(address, phys, pgprot_val(flags));
	fixmaps++;
}

void __this_fixmap_does_not_exist(void)
{
	WARN_ON(1);
}

Update of /cvsroot/gc-linux/linux/drivers/serial
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/drivers/serial

Modified Files:
	Kconfig Makefile 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


Index: Makefile
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/serial/Makefile,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -d -r1.3 -r1.4
--- Makefile	14 Sep 2008 19:20:30 -0000	1.3
+++ Makefile	15 Nov 2008 20:10:15 -0000	1.4
@@ -1,8 +1,6 @@
 #
 # Makefile for the kernel serial device drivers.
 #
-#  $Id$
-#
 
 obj-$(CONFIG_SERIAL_CORE) += serial_core.o
 obj-$(CONFIG_SERIAL_21285) += 21285.o
@@ -28,7 +26,11 @@
 obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
 obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
 obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
+obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
+obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o
 obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
+obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
+obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
 obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
 obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
 obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
@@ -40,7 +42,6 @@
 obj-$(CONFIG_SERIAL_68360) += 68360serial.o
 obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
 obj-$(CONFIG_SERIAL_MCF) += mcf.o
-obj-$(CONFIG_V850E_UART) += v850e_uart.o
 obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
 obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o

Index: Kconfig
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/serial/Kconfig,v
retrieving revision 1.4
retrieving revision 1.5
diff -u -d -r1.4 -r1.5
--- Kconfig	14 Sep 2008 19:20:30 -0000	1.4
+++ Kconfig	15 Nov 2008 20:10:15 -0000	1.5
@@ -1,8 +1,6 @@
 #
 # Serial device configuration
 #
-# $Id$
-#
 
 menu "Serial drivers"
 	depends on HAS_IOMEM
@@ -448,9 +446,9 @@
 	  your boot loader (lilo or loadlin) about how to pass options to the
 	  kernel at boot time.)
 
-config SERIAL_S3C2410
-	tristate "Samsung S3C2410/S3C2440/S3C2442/S3C2412 Serial port support"
-	depends on ARM && ARCH_S3C2410
+config SERIAL_SAMSUNG
+	tristate "Samsung SoC serial support"
+	depends on ARM && PLAT_S3C24XX
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -458,12 +456,18 @@
 	  provide all of these ports, depending on how the serial port
 	  pins are configured.
 
-	  Currently this driver supports the UARTS on the S3C2410, S3C2440,
-	  S3C2442, S3C2412 and S3C2413 CPUs.
+config SERIAL_SAMSUNG_DEBUG
+	bool "Samsung SoC serial debug"
+	depends on SERIAL_SAMSUNG
+	help
+	  Add support for debugging the serial driver. Since this is
+	  generally being used as a console, we use our own output
+	  routines that go via the low-level debug printascii()
+	  function.
 
-config SERIAL_S3C2410_CONSOLE
-	bool "Support for console on S3C2410 serial port"
-	depends on SERIAL_S3C2410=y
+config SERIAL_SAMSUNG_CONSOLE
+	bool "Support for console on Samsung SoC serial port"
+	depends on SERIAL_SAMSUNG=y
 	select SERIAL_CORE_CONSOLE
 	help
 	  Allow selection of the S3C24XX on-board serial ports for use as
@@ -476,6 +480,37 @@
 	  your boot loader about how to pass options to the kernel at
 	  boot time.)
 
+config SERIAL_S3C2400
+	tristate "Samsung S3C2410 Serial port support"
+	depends on ARM && SERIAL_SAMSUNG && CPU_S3C2400
+	default y if CPU_S3C2400
+	help
+	  Serial port support for the Samsung S3C2400 SoC
+
+config SERIAL_S3C2410
+	tristate "Samsung S3C2410 Serial port support"
+	depends on SERIAL_SAMSUNG && CPU_S3C2410
+	default y if CPU_S3C2410
+	help
+	  Serial port support for the Samsung S3C2410 SoC
+
+config SERIAL_S3C2412
+	tristate "Samsung S3C2412/S3C2413 Serial port support"
+	depends on SERIAL_SAMSUNG && CPU_S3C2412
+	default y if CPU_S3C2412
+	help
+	  Serial port support for the Samsung S3C2412 and S3C2413 SoC
+
+config SERIAL_S3C2440
+	tristate "Samsung S3C2440/S3C2442 Serial port support"
+	depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442)
+	default y if CPU_S3C2440
+	default y if CPU_S3C2442
+	help
+	  Serial port support for the Samsung S3C2440 and S3C2442 SoC
+
+
+
 config SERIAL_DZ
 	bool "DECstation DZ serial driver"
 	depends on MACH_DECSTATION && 32BIT
@@ -753,7 +788,7 @@
 
 config SERIAL_IMX
 	bool "IMX serial port support"
-	depends on ARM && ARCH_IMX
+	depends on ARM && (ARCH_IMX || ARCH_MXC)
 	select SERIAL_CORE
 	help
 	  If you have a machine based on a Motorola IMX CPU you
@@ -908,22 +943,6 @@
 	depends on SERIAL_IP22_ZILOG=y
 	select SERIAL_CORE_CONSOLE
 
-config V850E_UART
-	bool "NEC V850E on-chip UART support"
-	depends on V850E_MA1 || V850E_ME2 || V850E_TEG || V850E2_ANNA || V850E_AS85EP1
-	select SERIAL_CORE
-	default y
-
-config V850E_UARTB
-        bool
-	depends on V850E_UART && V850E_ME2
-	default y
-
-config V850E_UART_CONSOLE
-	bool "Use NEC V850E on-chip UART for console"
-	depends on V850E_UART
-	select SERIAL_CORE_CONSOLE
-
 config SERIAL_SH_SCI
 	tristate "SuperH SCI(F) serial port support"
 	depends on SUPERH || H8300

Update of /cvsroot/gc-linux/linux/drivers/rtc
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/drivers/rtc

Modified Files:
	Kconfig Makefile 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


Index: Makefile
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/rtc/Makefile,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -d -r1.3 -r1.4
--- Makefile	14 Sep 2008 19:20:30 -0000	1.3
+++ Makefile	15 Nov 2008 20:10:15 -0000	1.4
@@ -24,6 +24,7 @@
 obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc-cmos.o
 obj-$(CONFIG_RTC_DRV_DS1216)	+= rtc-ds1216.o
 obj-$(CONFIG_RTC_DRV_DS1302)	+= rtc-ds1302.o
+obj-$(CONFIG_RTC_DRV_DS1305)	+= rtc-ds1305.o
 obj-$(CONFIG_RTC_DRV_DS1307)	+= rtc-ds1307.o
 obj-$(CONFIG_RTC_DRV_DS1374)	+= rtc-ds1374.o
 obj-$(CONFIG_RTC_DRV_DS1511)	+= rtc-ds1511.o
@@ -35,6 +36,7 @@
 obj-$(CONFIG_RTC_DRV_GCN)	+= rtc-gcn.o
 obj-$(CONFIG_RTC_DRV_ISL1208)	+= rtc-isl1208.o
 obj-$(CONFIG_RTC_DRV_M41T80)	+= rtc-m41t80.o
+obj-$(CONFIG_RTC_DRV_M41T94)	+= rtc-m41t94.o
 obj-$(CONFIG_RTC_DRV_M48T59)	+= rtc-m48t59.o
 obj-$(CONFIG_RTC_DRV_M48T86)	+= rtc-m48t86.o
 obj-$(CONFIG_RTC_DRV_MAX6900)	+= rtc-max6900.o
@@ -42,6 +44,7 @@
 obj-$(CONFIG_RTC_DRV_OMAP)	+= rtc-omap.o
 obj-$(CONFIG_RTC_DRV_PCF8563)	+= rtc-pcf8563.o
 obj-$(CONFIG_RTC_DRV_PCF8583)	+= rtc-pcf8583.o
+obj-$(CONFIG_RTC_DRV_PL030)	+= rtc-pl030.o
 obj-$(CONFIG_RTC_DRV_PL031)	+= rtc-pl031.o
 obj-$(CONFIG_RTC_DRV_PPC)	+= rtc-ppc.o
 obj-$(CONFIG_RTC_DRV_R9701)	+= rtc-r9701.o

Index: Kconfig
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/rtc/Kconfig,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -d -r1.3 -r1.4
--- Kconfig	14 Sep 2008 19:20:29 -0000	1.3
+++ Kconfig	15 Nov 2008 20:10:15 -0000	1.4
@@ -273,6 +273,25 @@
 
 if SPI_MASTER
 
+config RTC_DRV_M41T94
+	tristate "ST M41T94"
+	help
+	  If you say yes here you will get support for the
+	  ST M41T94 SPI RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-m41t94.
+
+config RTC_DRV_DS1305
+	tristate "Dallas/Maxim DS1305/DS1306"
+	help
+	  Select this driver to get support for the Dallas/Maxim DS1305
+	  and DS1306 real time clock chips.  These support a trickle
+	  charger, alarms, and NVRAM in addition to the clock.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ds1305.
+
 config RTC_DRV_MAX6902
 	tristate "Maxim MAX6902"
 	help
@@ -479,6 +498,16 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called rtc-vr41xx.
 
+config RTC_DRV_PL030
+	tristate "ARM AMBA PL030 RTC"
+	depends on ARM_AMBA
+	help
+	  If you say Y here you will get access to ARM AMBA
+	  PrimeCell PL030 RTC found on certain ARM SOCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtc-pl030.
+
 config RTC_DRV_PL031
 	tristate "ARM AMBA PL031 RTC"
 	depends on ARM_AMBA
@@ -505,12 +534,13 @@
 	  this is powered by the backup power supply.
 
 config RTC_DRV_AT91SAM9
-	tristate "AT91SAM9x"
+	tristate "AT91SAM9x/AT91CAP9"
 	depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
 	help
-	  RTC driver for the Atmel AT91SAM9x internal RTT (Real Time Timer).
-	  These timers are powered by the backup power supply (such as a
-	  small coin cell battery), but do not need to be used as RTCs.
+	  RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT
+	  (Real Time Timer). These timers are powered by the backup power
+	  supply (such as a small coin cell battery), but do not need to
+	  be used as RTCs.
 
 	  (On AT91SAM9rl chips you probably want to use the dedicated RTC
 	  module and leave the RTT available for other uses.)
@@ -541,7 +571,7 @@
 
 config RTC_DRV_BFIN
 	tristate "Blackfin On-Chip RTC"
-	depends on BLACKFIN
+	depends on BLACKFIN && !BF561
 	help
 	  If you say yes here you will get support for the
 	  Blackfin On-Chip Real Time Clock.