One of two possible causes... If the PERIOD is too large to achieve the=20
maximum feedrate , a following error will be triggered with rapid moves. I=
don't think this the problem in your case..
The alternative is the PID gains set too high, which if you have just chang=
the UNITS and scales, is most likely. I would suggest using the=20
mill_mm_freq.ini as a starting point for your proposed machine.
On Wednesday 09 March 2005 18:55, David Winter wrote:
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0I have a small question, this happens with=
both 4.12 and
> 4.18 BDI
> If I edit the generic.ini file for metric and the max feedrate to be 100
> when I first switch on the machine I get a following error message which I
> cancel and then if I jog an axis after a short time I again get a followi=
> message. How can I have a following error with no feedback? Also, if I go
> into MDI mode, after homing the axes, and input G0 X100 and enter I get
> a message Linear Move out of range. I have set the software limits to
> -1000 and +1000. =A0I really want to use this software but it's doin' me =
> in. This should be really simple and I don't understand what I'm doing
Pieces of seven, pieces of seven - A parroty error.
"To err is human...to really f*** things up requires the root password."
=46rom a collection of quotes at http://www.indigo.org/quotes.html