DOSEMU for Linux

Bugs item #1602643, was opened at 2006-11-25 09:22
Message generated for change (Comment added) made by bartoldeman
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457447&aid=1602643&group_id=49784

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: japheth (japheth)
Assigned to: Nobody/Anonymous (nobody)
Summary: Regression in DosEmu 1.3.4

Initial Comment:

Hello,

I just compiled DosEmu 1.3.4 and noticed that some HX DPMI programs no longer work, which run with no problems in (the last) CVS DosEmu version from March 2006.

The symptom is that the dosemu session is terminated telling me that a Debug Exception has occured outside of dpmi client.

The HX Win32 emulation indeed sets the trace flag in the EFL copy on the locked stack inside a IRQ 1 or IRQ 9 handler and expects this flag causing a Debug Exception which then is to be handled by the DPMI client (it should not terminate DosEmu!). I remember I once wrote a  feature request about this issue, it was fixed by Stas then, but I cannot find it anymore.

I attached a test case.





----------------------------------------------------------------------

>Comment By: Bart Oldeman (bartoldeman)
Date: 2006-11-25 23:39

Message:
Logged In: YES 
user_id=176505
Originator: NO

TF was leaked from the DPMI client into DOSEMU. It should be fixed now:
http://dosemu.svn.sourceforge.net/viewvc/dosemu?view=rev&revision=1717
Please let me know if anything else is still wrong.

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457447&aid=1602643&group_id=49784

Bugs item #1602643, was opened at 2006-11-25 09:22
Message generated for change (Comment added) made by japheth
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457447&aid=1602643&group_id=49784

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: japheth (japheth)
Assigned to: Nobody/Anonymous (nobody)
Summary: Regression in DosEmu 1.3.4

Initial Comment:

Hello,

I just compiled DosEmu 1.3.4 and noticed that some HX DPMI programs no longer work, which run with no problems in (the last) CVS DosEmu version from March 2006.

The symptom is that the dosemu session is terminated telling me that a Debug Exception has occured outside of dpmi client.

The HX Win32 emulation indeed sets the trace flag in the EFL copy on the locked stack inside a IRQ 1 or IRQ 9 handler and expects this flag causing a Debug Exception which then is to be handled by the DPMI client (it should not terminate DosEmu!). I remember I once wrote a  feature request about this issue, it was fixed by Stas then, but I cannot find it anymore.

I attached a test case.





----------------------------------------------------------------------

>Comment By: japheth (japheth)
Date: 2006-11-26 06:59

Message:
Logged In: YES 
user_id=982058
Originator: YES


I'm getting this if I try to run the svn command:

#svn co https://svn.sourceforge.net/svnroot/dosemu/trunk dosemu
Fehler bei der Validierung des Serverzertifikats für
'https://svn.sourceforge.net:443':
 - Das Zertifikat ist nicht von einer vertrauenswürdigen Instanz
ausgestellt
   Überprüfen Sie den Fingerabduck, um das Zertifikat zu validieren!
Zertifikats-Informationen:
 - Hostname: *.sourceforge.net
 - Gültig: von Dec  8 13:40:07 2005 GMT bis Feb  7 13:40:07 2007 GMT
 - Aussteller: Equifax Secure Certificate Authority, Equifax, US
 - Fingerabdruck:
49:b8:cb:87:04:8c:49:39:45:83:dd:4c:cf:c7:54:57:b0:9e:84:5d
Ve(r)werfen, (t)emporär akzeptieren oder (p)ermanent akzeptieren? p
svn: PROPFIND Anfrage fehlgeschlagen auf '/svnroot/dosemu/trunk'
svn: PROPFIND von '/svnroot/dosemu/trunk': Could not read status line:
Secure connection truncated (https://svn.sourceforge.net)

translated to English is is something like: 

PROPFIND request failed at '/svnroot/dosemu/trunk'


----------------------------------------------------------------------

Comment By: Bart Oldeman (bartoldeman)
Date: 2006-11-25 23:39

Message:
Logged In: YES 
user_id=176505
Originator: NO

TF was leaked from the DPMI client into DOSEMU. It should be fixed now:
http://dosemu.svn.sourceforge.net/viewvc/dosemu?view=rev&revision=1717
Please let me know if anything else is still wrong.

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457447&aid=1602643&group_id=49784

Bugs item #1602643, was opened at 2006-11-25 09:22
Message generated for change (Comment added) made by bartoldeman
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457447&aid=1602643&group_id=49784

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: japheth (japheth)
Assigned to: Nobody/Anonymous (nobody)
Summary: Regression in DosEmu 1.3.4

Initial Comment:

Hello,

I just compiled DosEmu 1.3.4 and noticed that some HX DPMI programs no longer work, which run with no problems in (the last) CVS DosEmu version from March 2006.

The symptom is that the dosemu session is terminated telling me that a Debug Exception has occured outside of dpmi client.

The HX Win32 emulation indeed sets the trace flag in the EFL copy on the locked stack inside a IRQ 1 or IRQ 9 handler and expects this flag causing a Debug Exception which then is to be handled by the DPMI client (it should not terminate DosEmu!). I remember I once wrote a  feature request about this issue, it was fixed by Stas then, but I cannot find it anymore.

I attached a test case.





----------------------------------------------------------------------

>Comment By: Bart Oldeman (bartoldeman)
Date: 2006-11-26 11:27

Message:
Logged In: YES 
user_id=176505
Originator: NO

That cryptic message usually happens when the SF site is overloaded. You
could try again, or if it persists, I don't know, you could always try to
manually apply the patch from the URL I gave you.

----------------------------------------------------------------------

Comment By: japheth (japheth)
Date: 2006-11-26 06:59

Message:
Logged In: YES 
user_id=982058
Originator: YES


I'm getting this if I try to run the svn command:

#svn co https://svn.sourceforge.net/svnroot/dosemu/trunk dosemu
Fehler bei der Validierung des Serverzertifikats für
'https://svn.sourceforge.net:443':
 - Das Zertifikat ist nicht von einer vertrauenswürdigen Instanz
ausgestellt
   Überprüfen Sie den Fingerabduck, um das Zertifikat zu validieren!
Zertifikats-Informationen:
 - Hostname: *.sourceforge.net
 - Gültig: von Dec  8 13:40:07 2005 GMT bis Feb  7 13:40:07 2007 GMT
 - Aussteller: Equifax Secure Certificate Authority, Equifax, US
 - Fingerabdruck:
49:b8:cb:87:04:8c:49:39:45:83:dd:4c:cf:c7:54:57:b0:9e:84:5d
Ve(r)werfen, (t)emporär akzeptieren oder (p)ermanent akzeptieren? p
svn: PROPFIND Anfrage fehlgeschlagen auf '/svnroot/dosemu/trunk'
svn: PROPFIND von '/svnroot/dosemu/trunk': Could not read status line:
Secure connection truncated (https://svn.sourceforge.net)

translated to English is is something like: 

PROPFIND request failed at '/svnroot/dosemu/trunk'


----------------------------------------------------------------------

Comment By: Bart Oldeman (bartoldeman)
Date: 2006-11-25 23:39

Message:
Logged In: YES 
user_id=176505
Originator: NO

TF was leaked from the DPMI client into DOSEMU. It should be fixed now:
http://dosemu.svn.sourceforge.net/viewvc/dosemu?view=rev&revision=1717
Please let me know if anything else is still wrong.

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457447&aid=1602643&group_id=49784

Bugs item #1602643, was opened at 2006-11-25 09:22
Message generated for change (Comment added) made by japheth
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457447&aid=1602643&group_id=49784

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: japheth (japheth)
Assigned to: Nobody/Anonymous (nobody)
Summary: Regression in DosEmu 1.3.4

Initial Comment:

Hello,

I just compiled DosEmu 1.3.4 and noticed that some HX DPMI programs no longer work, which run with no problems in (the last) CVS DosEmu version from March 2006.

The symptom is that the dosemu session is terminated telling me that a Debug Exception has occured outside of dpmi client.

The HX Win32 emulation indeed sets the trace flag in the EFL copy on the locked stack inside a IRQ 1 or IRQ 9 handler and expects this flag causing a Debug Exception which then is to be handled by the DPMI client (it should not terminate DosEmu!). I remember I once wrote a  feature request about this issue, it was fixed by Stas then, but I cannot find it anymore.

I attached a test case.





----------------------------------------------------------------------

>Comment By: japheth (japheth)
Date: 2006-11-26 16:04

Message:
Logged In: YES 
user_id=982058
Originator: YES


Ok, thanks, some time later I was able to do a check out.
The regression also has vanished, the Debug Exception no longer occurs
:).


----------------------------------------------------------------------

Comment By: Bart Oldeman (bartoldeman)
Date: 2006-11-26 11:27

Message:
Logged In: YES 
user_id=176505
Originator: NO

That cryptic message usually happens when the SF site is overloaded. You
could try again, or if it persists, I don't know, you could always try to
manually apply the patch from the URL I gave you.

----------------------------------------------------------------------

Comment By: japheth (japheth)
Date: 2006-11-26 06:59

Message:
Logged In: YES 
user_id=982058
Originator: YES


I'm getting this if I try to run the svn command:

#svn co https://svn.sourceforge.net/svnroot/dosemu/trunk dosemu
Fehler bei der Validierung des Serverzertifikats für
'https://svn.sourceforge.net:443':
 - Das Zertifikat ist nicht von einer vertrauenswürdigen Instanz
ausgestellt
   Überprüfen Sie den Fingerabduck, um das Zertifikat zu validieren!
Zertifikats-Informationen:
 - Hostname: *.sourceforge.net
 - Gültig: von Dec  8 13:40:07 2005 GMT bis Feb  7 13:40:07 2007 GMT
 - Aussteller: Equifax Secure Certificate Authority, Equifax, US
 - Fingerabdruck:
49:b8:cb:87:04:8c:49:39:45:83:dd:4c:cf:c7:54:57:b0:9e:84:5d
Ve(r)werfen, (t)emporär akzeptieren oder (p)ermanent akzeptieren? p
svn: PROPFIND Anfrage fehlgeschlagen auf '/svnroot/dosemu/trunk'
svn: PROPFIND von '/svnroot/dosemu/trunk': Could not read status line:
Secure connection truncated (https://svn.sourceforge.net)

translated to English is is something like: 

PROPFIND request failed at '/svnroot/dosemu/trunk'


----------------------------------------------------------------------

Comment By: Bart Oldeman (bartoldeman)
Date: 2006-11-25 23:39

Message:
Logged In: YES 
user_id=176505
Originator: NO

TF was leaked from the DPMI client into DOSEMU. It should be fixed now:
http://dosemu.svn.sourceforge.net/viewvc/dosemu?view=rev&revision=1717
Please let me know if anything else is still wrong.

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457447&aid=1602643&group_id=49784

Support Requests item #1602085, was opened at 2006-11-24 03:45
Message generated for change (Comment added) made by bartoldeman
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457448&aid=1602085&group_id=49784

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: Install Problem (example)
Group: None
Status: Open
Priority: 5
Private: No
Submitted By: zhang (jy_zhang)
Assigned to: Nobody/Anonymous (nobody)
Summary: DOSEMU1.3.4 installation

Initial Comment:
make[1]: Entering directory `/home/admin/dosemu-1.3.4/src'
rm -rf ../tmp
mkdir -p -m 0755 /home/admin/dosemu-1.3.4/tmp/dosemu
/usr/bin/install -c -d /usr/local/share/dosemu
for i in `find ../commands/* -type f`; do \
  /usr/bin/install -c -m 0644 $i /home/admin/dosemu-1.3.4/tmp/dosemu; \
done
cd ../commands; for i in `find * -type l`; do \
  ln -sf generic.com /home/admin/dosemu-1.3.4/tmp/dosemu/$i; \
done
rm -rf /usr/local/share/dosemu/commands /usr/local/share/dosemu/freedos
rm -rf /usr/local/share/dosemu/drive_z /usr/local/share/dosemu/*.tgz
/usr/bin/install -c -d /etc/dosemu
cd ..; if [ -f dosemu-freedos-bin.tgz ]; then \
  rm -f /usr/local/share/dosemu/drive_z/tmp; \
  tar -C /usr/local/share/dosemu/.. --no-same-owner -xpzf dosemu-freedos-bin.tgz; \
  rm -f /usr/local/share/dosemu/FDchange.log; \
  rm -f /usr/local/share/dosemu/README.bindist; \
  mv /usr/local/share/dosemu/freedos /usr/local/share/dosemu/drive_z; \
  /usr/bin/install -c -m 0644 dist/config.sys /usr/local/share/dosemu/drive_z; \  /usr/bin/install -c -m 0644 dist/autoexec.bat /usr/local/share/dosemu/drive_z; \
  /usr/bin/install -c -m 0644 dist/config.emu /usr/local/share/dosemu/drive_z; \  /usr/bin/install -c -m 0644 dist/autoemu.bat /usr/local/share/dosemu/drive_z; \
  /usr/bin/install -c -d /etc/dosemu/drives; \
  if [ ! -e /etc/dosemu/drives/c ]; then \
    ln -sf /usr/local/share/dosemu/drive_z /etc/dosemu/drives/c; \
  fi; \
  if [ ! -e /etc/dosemu/drives/d ]; then \
    ln -sf /usr/local/share/dosemu/drive_z /etc/dosemu/drives/d; \
  fi; \
  rm -rf /usr/local/share/dosemu/drive_z/tmp; \
  ln -sf /tmp /usr/local/share/dosemu/drive_z/tmp; \
  # legacy symlink; \
  ln -sf drive_z /usr/local/share/dosemu/freedos; \
fi
/bin/bash: -c: line 1: syntax error: unexpected end of file
make[1]: *** [install] Error 2
make[1]: Leaving directory `/home/admin/dosemu-1.3.4/src'
make: *** [install] Error 2

please help me fix the problem.

----------------------------------------------------------------------

>Comment By: Bart Oldeman (bartoldeman)
Date: 2006-11-24 11:53

Message:
Logged In: YES 
user_id=176505
Originator: NO

Can you try to remove the line that says

	  # legacy symlink; \

in src/arch/linux/Makefile.main and try again?

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457448&aid=1602085&group_id=49784

Support Requests item #1575095, was opened at 2006-10-11 07:58
Message generated for change (Comment added) made by jenwalter
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457448&aid=1575095&group_id=49784

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
Status: Open
Priority: 5
Private: No
Submitted By: GarfielDJ (garfieldj)
Assigned to: Nobody/Anonymous (nobody)
Summary: ,,R" key is the same as ,,T" ?

Initial Comment:
Dear Dosemu Team !

I've started useing dosemu so long ago.

But Yesterday I've installeled in on a Gentoo linux (
nVidia VGA Card ) and if I press ,,R" key the dosemu
recognize that iti is ,,T".In the dosemus X window .

But In cosnsole mode it is OK. Evrywhere else is okey
the character , like in the KDE , Console etc.

Can u help me , to solve this problem ?

Regards !

----------------------------------------------------------------------

Comment By: jenwalter (jenwalter)
Date: 2006-11-20 20:11

Message:
Logged In: YES 
user_id=1650035
Originator: NO

I am working with ubuntu edgy eft (6.10) and I also have exactly the same
problem. The R key typed in dosemu X window is a T and the I key is a dot
(.). Accordingly to the problem description of garfieldj, I don't have
this problem in a terminal, editor or office window whatsoever on my
system. Only in dosemu. I use a german keyboard layout and all the other
keys are correct in the dosemu X window, even the specific german keys. I
have been using dosemu and freedos very successfully for years without a
problem. I have encountered this problem now after installing the new
ubuntu system on a new computer.

As I didn't find a solution in google, I urgently need help to solve this
problem and therefore would be very grateful for a solution to the
problem.

Best regards

Jens

----------------------------------------------------------------------

Comment By: Stuart Axon (stuaxo)
Date: 2006-11-14 17:06

Message:
Logged In: YES 
user_id=1132071

I had a similar thing in ubuntu - sorry no more details at
the moment, I'll see if it's still the case when my computer
is working properly again.

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457448&aid=1575095&group_id=49784

Support Requests item #1575095, was opened at 2006-10-11 09:58
Message generated for change (Comment added) made by bartm2
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457448&aid=1575095&group_id=49784

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
Status: Open
Priority: 5
Private: No
Submitted By: GarfielDJ (garfieldj)
Assigned to: Nobody/Anonymous (nobody)
Summary: ,,R" key is the same as ,,T" ?

Initial Comment:
Dear Dosemu Team !

I've started useing dosemu so long ago.

But Yesterday I've installeled in on a Gentoo linux (
nVidia VGA Card ) and if I press ,,R" key the dosemu
recognize that iti is ,,T".In the dosemus X window .

But In cosnsole mode it is OK. Evrywhere else is okey
the character , like in the KDE , Console etc.

Can u help me , to solve this problem ?

Regards !

----------------------------------------------------------------------

Comment By: Bart Martens (bartm2)
Date: 2006-11-21 07:02

Message:
Logged In: YES 
user_id=1650371
Originator: NO

I guess that this problem is fixed in Debian.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=389878
http://packages.qa.debian.org/d/dosemu/news/20061110T024949Z.html

Thanks to Bart Oldeman.


----------------------------------------------------------------------

Comment By: jenwalter (jenwalter)
Date: 2006-11-20 21:11

Message:
Logged In: YES 
user_id=1650035
Originator: NO

I am working with ubuntu edgy eft (6.10) and I also have exactly the same
problem. The R key typed in dosemu X window is a T and the I key is a dot
(.). Accordingly to the problem description of garfieldj, I don't have
this problem in a terminal, editor or office window whatsoever on my
system. Only in dosemu. I use a german keyboard layout and all the other
keys are correct in the dosemu X window, even the specific german keys. I
have been using dosemu and freedos very successfully for years without a
problem. I have encountered this problem now after installing the new
ubuntu system on a new computer.

As I didn't find a solution in google, I urgently need help to solve this
problem and therefore would be very grateful for a solution to the
problem.

Best regards

Jens

----------------------------------------------------------------------

Comment By: Stuart Axon (stuaxo)
Date: 2006-11-14 18:06

Message:
Logged In: YES 
user_id=1132071

I had a similar thing in ubuntu - sorry no more details at
the moment, I'll see if it's still the case when my computer
is working properly again.

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457448&aid=1575095&group_id=49784

Support Requests item #1575095, was opened at 2006-10-11 07:58
Message generated for change (Comment added) made by stuaxo
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457448&aid=1575095&group_id=49784

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
Status: Open
Priority: 5
Private: No
Submitted By: GarfielDJ (garfieldj)
Assigned to: Nobody/Anonymous (nobody)
Summary: ,,R" key is the same as ,,T" ?

Initial Comment:
Dear Dosemu Team !

I've started useing dosemu so long ago.

But Yesterday I've installeled in on a Gentoo linux (
nVidia VGA Card ) and if I press ,,R" key the dosemu
recognize that iti is ,,T".In the dosemus X window .

But In cosnsole mode it is OK. Evrywhere else is okey
the character , like in the KDE , Console etc.

Can u help me , to solve this problem ?

Regards !

----------------------------------------------------------------------

Comment By: Stuart Axon (stuaxo)
Date: 2006-11-24 00:53

Message:
Logged In: YES 
user_id=1132071
Originator: NO

This is ok in ubuntu dapper drake (prob due to debian fix) now. - Don´t
have access to a gentoo box to test

----------------------------------------------------------------------

Comment By: Bart Martens (bartm2)
Date: 2006-11-21 06:02

Message:
Logged In: YES 
user_id=1650371
Originator: NO

I guess that this problem is fixed in Debian.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=389878
http://packages.qa.debian.org/d/dosemu/news/20061110T024949Z.html

Thanks to Bart Oldeman.


----------------------------------------------------------------------

Comment By: jenwalter (jenwalter)
Date: 2006-11-20 20:11

Message:
Logged In: YES 
user_id=1650035
Originator: NO

I am working with ubuntu edgy eft (6.10) and I also have exactly the same
problem. The R key typed in dosemu X window is a T and the I key is a dot
(.). Accordingly to the problem description of garfieldj, I don't have
this problem in a terminal, editor or office window whatsoever on my
system. Only in dosemu. I use a german keyboard layout and all the other
keys are correct in the dosemu X window, even the specific german keys. I
have been using dosemu and freedos very successfully for years without a
problem. I have encountered this problem now after installing the new
ubuntu system on a new computer.

As I didn't find a solution in google, I urgently need help to solve this
problem and therefore would be very grateful for a solution to the
problem.

Best regards

Jens

----------------------------------------------------------------------

Comment By: Stuart Axon (stuaxo)
Date: 2006-11-14 17:06

Message:
Logged In: YES 
user_id=1132071

I had a similar thing in ubuntu - sorry no more details at
the moment, I'll see if it's still the case when my computer
is working properly again.

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457448&aid=1575095&group_id=49784

Support Requests item #1575095, was opened at 2006-10-11 09:58
Message generated for change (Comment added) made by bartm2
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457448&aid=1575095&group_id=49784

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
Status: Open
Priority: 5
Private: No
Submitted By: GarfielDJ (garfieldj)
Assigned to: Nobody/Anonymous (nobody)
Summary: ,,R" key is the same as ,,T" ?

Initial Comment:
Dear Dosemu Team !

I've started useing dosemu so long ago.

But Yesterday I've installeled in on a Gentoo linux (
nVidia VGA Card ) and if I press ,,R" key the dosemu
recognize that iti is ,,T".In the dosemus X window .

But In cosnsole mode it is OK. Evrywhere else is okey
the character , like in the KDE , Console etc.

Can u help me , to solve this problem ?

Regards !

----------------------------------------------------------------------

Comment By: Bart Martens (bartm2)
Date: 2006-11-24 07:29

Message:
Logged In: YES 
user_id=1650371
Originator: NO

I doubt that Bart Oldeman's fix in Debian is already in Ubuntu.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=389878
http://packages.qa.debian.org/d/dosemu/news/20061110T024949Z.html
http://changelogs.ubuntu.com/changelogs/pool/multiverse/d/dosemu/dosemu_1.2.2-5ubuntu1/changelog

I suggest Ubuntu users to report this in the Ubuntu bug tracking system,
to suggest to synchronize with Debian.

I suggest Gentoo users to have a look at this patch:
http://bugs.debian.org/cgi-bin/bugreport.cgi/patch389878.diff?bug=389878;msg=42;att=1


----------------------------------------------------------------------

Comment By: Stuart Axon (stuaxo)
Date: 2006-11-24 01:53

Message:
Logged In: YES 
user_id=1132071
Originator: NO

This is ok in ubuntu dapper drake (prob due to debian fix) now. - Don´t
have access to a gentoo box to test

----------------------------------------------------------------------

Comment By: Bart Martens (bartm2)
Date: 2006-11-21 07:02

Message:
Logged In: YES 
user_id=1650371
Originator: NO

I guess that this problem is fixed in Debian.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=389878
http://packages.qa.debian.org/d/dosemu/news/20061110T024949Z.html

Thanks to Bart Oldeman.


----------------------------------------------------------------------

Comment By: jenwalter (jenwalter)
Date: 2006-11-20 21:11

Message:
Logged In: YES 
user_id=1650035
Originator: NO

I am working with ubuntu edgy eft (6.10) and I also have exactly the same
problem. The R key typed in dosemu X window is a T and the I key is a dot
(.). Accordingly to the problem description of garfieldj, I don't have
this problem in a terminal, editor or office window whatsoever on my
system. Only in dosemu. I use a german keyboard layout and all the other
keys are correct in the dosemu X window, even the specific german keys. I
have been using dosemu and freedos very successfully for years without a
problem. I have encountered this problem now after installing the new
ubuntu system on a new computer.

As I didn't find a solution in google, I urgently need help to solve this
problem and therefore would be very grateful for a solution to the
problem.

Best regards

Jens

----------------------------------------------------------------------

Comment By: Stuart Axon (stuaxo)
Date: 2006-11-14 18:06

Message:
Logged In: YES 
user_id=1132071

I had a similar thing in ubuntu - sorry no more details at
the moment, I'll see if it's still the case when my computer
is working properly again.

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457448&aid=1575095&group_id=49784

Bugs item #1598964, was opened at 2006-11-18 19:49
Message generated for change (Comment added) made by bartoldeman
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457447&aid=1598964&group_id=49784

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: Paul Dunne (pdunne)
Assigned to: Nobody/Anonymous (nobody)
Summary: Failing to compile

Initial Comment:
When trying to build dosemu-1.3.4 on a stock slackware 11.0 dist, the
build fails with the following messages:

make[2]: Entering directory `/usr/local/src/dosemu-1.3.4/src/base/init'
bison -y -v -do parser.c  parser.y
make[2]: *** [parser.c] Broken pipe
make[2]: Leaving directory `/usr/local/src/dosemu-1.3.4/src/base/init'
make[1]: *** [base/init] Error 2
make[1]: Leaving directory `/usr/local/src/dosemu-1.3.4/src'
make: *** [default] Error 2


----------------------------------------------------------------------

>Comment By: Bart Oldeman (bartoldeman)
Date: 2006-11-18 20:11

Message:
Logged In: YES 
user_id=176505
Originator: NO

Googling around it looks like this usually happens if you do not have GNU
m4 installed;
it's not really a DOSEMU issue.
Please try to install m4 and try again.


----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457447&aid=1598964&group_id=49784

Bugs item #1598964, was opened at 2006-11-18 20:49
Message generated for change (Comment added) made by pdunne
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457447&aid=1598964&group_id=49784

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: Paul Dunne (pdunne)
Assigned to: Nobody/Anonymous (nobody)
Summary: Failing to compile

Initial Comment:
When trying to build dosemu-1.3.4 on a stock slackware 11.0 dist, the
build fails with the following messages:

make[2]: Entering directory `/usr/local/src/dosemu-1.3.4/src/base/init'
bison -y -v -do parser.c  parser.y
make[2]: *** [parser.c] Broken pipe
make[2]: Leaving directory `/usr/local/src/dosemu-1.3.4/src/base/init'
make[1]: *** [base/init] Error 2
make[1]: Leaving directory `/usr/local/src/dosemu-1.3.4/src'
make: *** [default] Error 2


----------------------------------------------------------------------

>Comment By: Paul Dunne (pdunne)
Date: 2006-11-18 22:08

Message:
Logged In: YES 
user_id=1648710
Originator: YES

$m4 --version
GNU M4 1.4.5
Written by Rene' Seindal.


----------------------------------------------------------------------

Comment By: Bart Oldeman (bartoldeman)
Date: 2006-11-18 21:11

Message:
Logged In: YES 
user_id=176505
Originator: NO

Googling around it looks like this usually happens if you do not have GNU
m4 installed;
it's not really a DOSEMU issue.
Please try to install m4 and try again.


----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=457447&aid=1598964&group_id=49784