DScaler Deinterlacer/Scaler

I have a Hauppauge WinTV Theater (878A right?) and I get some minor sound 
problems that you should be able to fix very easily I think.
When I set sound source to "tuner" I can hardly  hear the sound, I mostly 
hear a very load static.
If I set the source to "radio" however, the sound is perfect.
The problem is that if I do this the sound never shuts itself of when I 
quit.
The problem is so small that you should be able to fix it without much 
effort, making a routine that the audio is muted on the line-in on the 
"radio" input too and not only on the "tuner" input. This would seem very 
logical unless there is something about the way it is programmed that I 
don't know.
The problem, naturally, appears on both Hauppauges drivers aswell as 
BTwincap

_________________________________________________________________
Senaste nytt från motormarknaden http://motor.msn.se/

Bugs item #655963, was opened at 2002-12-18 22:07
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=107420&aid=655963&group_id=7420

Category: Hardware Related
Group: Intermittent
Status: Open
Priority: 5
Submitted By: Jeroen Baas (gijoke)
Assigned to: Nobody/Anonymous (nobody)
Summary: DScaler reboots: timeshift and BTWINCAP

Initial Comment:
DScaler crashes if you try to use the BTWINCAP driver
(btwincap.sourceforge.net) and start capturing.
It first shutsdown the application. sound continues. after 
about 10-20 seconds the system reboots.
I've tried 2 systemsetups: both same result.

Operating system: winxp
Card used: Terratec TV+ (878)
Driver: Btwincap 5.3.5

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=107420&aid=655963&group_id=7420

i can do it. and because i'm the US i'll be able to test it thoroughly.
Yamaguchi, i'll send you my postal address in a separate email.

regards,
ivan.

----- Original Message -----
From: "John Adcock" <John@...>
Date: Wed, 18 Dec 2002 14:05:51 -0000 
To: <deinterlace-discuss@...>
Subject: [Deinterlace-discuss] FWD: SAA7133 with Dscaler

> Does anyone want to take up this offer of a card in return for DScaler
> support?  I'm afraid I have too much on to promise anything concrete in
> return for this generous offer.
> 
> Thanks
> 
> John
> 
> > -----Original Message-----
> > From: Shin'ya Yamaguchi [mailto:yamaguchi@...] 
> > Sent: 17 December 2002 08:56
> > To: adcockj@...
> > Subject: SAA7133 with Dscaler
> > 
> > 
> > Dear John,
> > 
> > We are a TV card vendor in Japan.
> > 
> > We have begun to ship "PrimeTV 7133", a new Philips 
> > SAA713x-based products since last month, and already we sold 
> > over 5,000 set in Japanese market during one month. Our many 
> > customers request to support our card to work with Dscaler 
> > 4.xx. As result that I tested 4.1.2 maillist-only version 
> > myself, the chip is not detected (work under DirectShow 
> > mode), and cannot control TV tuner.
> > 
> > Our TV card product is made by a Taiwanese company Animation 
> > Technologies (known as LifeView brand), however, it's little 
> > bit different from LifeView's original FlyVideo 2000(SAA7130) 
> > or 3000(SAA7134), because our card is specially designed for 
> > Japanese market, using SAA7133(it support US BTSC/Japanese 
> > EIAJ MTS system) and TCL's Japanese-spec TV tuner 
> > unit(Intermediate Freq.: 58.75MHz, to prevent interference 
> > with IF harmonic and Japanese Channel 1 & 6).
> > 
> > I hope you could make our card work with Dscaler, and if you 
> > so, we would like to send a set of card.  Please mail your 
> > snail mailing address.
> > 
> > Best Regards,
> > --
> > Shin'ya Yamaguchi
> > R & D Dept. 2 / Planning & Public Relations Dept., 
> > NOVAC Co., Ltd.
> > E-mail : yamaguchi@...
> > WWW : http://www.novac.co.jp/
> > 
> > 
> > 
> 
> 
> -------------------------------------------------------
> This sf.net email is sponsored by:
> With Great Power, Comes Great Responsibility
> Learn to use your power at OSDN's High Performance Computing Channel
> http://hpc.devchannel.org/
> _______________________________________________
> Deinterlace-discuss mailing list
> Deinterlace-discuss@...
> https://lists.sourceforge.net/lists/listinfo/deinterlace-discuss

-- 
__________________________________________________________
Sign-up for your own FREE Personalized E-mail at Mail.com
http://www.mail.com/?sr=signup

Meet Singles
http://corp.mail.com/lavalife

> My forum ID is "AtNak".  Although this ID is not flagged as a
Developer,=20
Dan or Rob=20

Could you change this so that Atsushi and the other active developers
are correctly identified.

Thanks

John

Does anyone want to take up this offer of a card in return for DScaler
support?  I'm afraid I have too much on to promise anything concrete in
return for this generous offer.

Thanks

John

> -----Original Message-----
> From: Shin'ya Yamaguchi [mailto:yamaguchi@...
> Sent: 17 December 2002 08:56
> To: adcockj@...
> Subject: SAA7133 with Dscaler
>=20
>=20
> Dear John,
>=20
> We are a TV card vendor in Japan.
>=20
> We have begun to ship "PrimeTV 7133", a new Philips=20
> SAA713x-based products since last month, and already we sold=20
> over 5,000 set in Japanese market during one month. Our many=20
> customers request to support our card to work with Dscaler=20
> 4.xx. As result that I tested 4.1.2 maillist-only version=20
> myself, the chip is not detected (work under DirectShow=20
> mode), and cannot control TV tuner.
>=20
> Our TV card product is made by a Taiwanese company Animation=20
> Technologies (known as LifeView brand), however, it's little=20
> bit different from LifeView's original FlyVideo 2000(SAA7130)=20
> or 3000(SAA7134), because our card is specially designed for=20
> Japanese market, using SAA7133(it support US BTSC/Japanese=20
> EIAJ MTS system) and TCL's Japanese-spec TV tuner=20
> unit(Intermediate Freq.: 58.75MHz, to prevent interference=20
> with IF harmonic and Japanese Channel 1 & 6).
>=20
> I hope you could make our card work with Dscaler, and if you=20
> so, we would like to send a set of card.  Please mail your=20
> snail mailing address.
>=20
> Best Regards,
> --
> Shin'ya Yamaguchi
> R & D Dept. 2 / Planning & Public Relations Dept.,=20
> NOVAC Co., Ltd.
> E-mail : yamaguchi@...
> WWW : http://www.novac.co.jp/
>=20
>=20
>=20

Please update a new release of DScaler to support Manli TV Tuner card with SAA7130 chip.


SAA7130 Card [0]: 

Vendor ID: 0x1131 
Device ID: 0x7130 
Subsystem ID: 0x00001131 

Tuner type: LG TPI8PSB12P (PAL B/G) which works good if LG TPI8PSB11D (PAL B/G) is selected.

=============================================== 
SAA7130 Card - Register Dump: 

SAA7134_GPIO_GPMODE: 00006000 
SAA7134_GPIO_GPSTATUS: 00019f00 
SAA7134_ANALOG_IN_CTRL1: c3  ( c1 for composite or c6 for S-Video ) 
SAA7134_ANALOG_IO_SELECT: 01  ( 00 for Composite or S-Video )
SAA7134_VIDEO_PORT_CTRL0: 00000000 
SAA7134_VIDEO_PORT_CTRL4: 00000000
SAA7134_VIDEO_PORT_CTRL8: 00
SAA7134_I2S_OUTPUT_SELECT: 40
SAA7134_I2S_OUTPUT_FORMAT: 00 
SAA7134_I2S_OUTPUT_LEVEL: 00
SAA7134_I2S_AUDIO_OUTPUT: 00
SAA7134_TS_PARALLEL: 00
SAA7134_TS_PARALLEL_SERIAL: 00
SAA7134_TS_SERIAL0: 00
SAA7134_TS_SERIAL1: 00 
SAA7134_TS_DMA0: 00 
SAA7134_TS_DMA1: 00 
SAA7134_TS_DMA2: 00 
SAA7134_SPECIAL_MODE: 01 
end of dump