cruisecontrol

Bryan,

How do you plan to solve the problem of authenticating
build requestors?

Thanks,

/U

 -------------- Original message ----------------------
From: "Jeffrey Fredrick" <jeffrey.fredrick@...>
> This user/password won't effect the index.jsp, the web app, only the
> JMX interface.  So while it is true you won't have read access to the
> JMX pages you can probably see most of what you'd want from the web
> app.
> 
> Jtf
> 
> On 5/3/07, Ross, Bryan M <bryan.m.ross@...> wrote:
> > Thank you, Jeffrey. I think this is getting at what I am looking for. It
> > appears, though, that the user-id/password would be required to see the
> > status page. That's better than nothing, but the ideal solution would be
> > to let anyone see the page but prompt for id and password in the event
> > of an attempted build (i.e., push the build button). I essentially want
> > to allow everyone READ access to the JMX Web interface but EXECUTE
> > access to only those who enter the id and password.
> >
> > But this is still very helpful. Thanks.
> >
> > -----Original Message-----
> > From: Jeffrey Fredrick [mailto:jeffrey.fredrick@...]
> > Sent: Thursday, May 03, 2007 9:48 AM
> > To: cruisecontrol-user@...
> > Subject: Re: [Cruisecontrol-user] Password authentication for the status
> > page
> >
> > Run the build loop with the userid and password:
> >
> > http://cruisecontrol.sourceforge.net/main/install.html#startupcruisecont
> > rol
> >
> > Jtf
> >
> > On 5/3/07, Ross, Bryan M <bryan.m.ross@...> wrote:
> > > Is there a way to require password authentication to trigger a build
> > > via the cc web page? I want ALL users to be able to see the project
> > > but only a FEW to be authorized to click a "build" button and trigger
> > a build.
> > >
> > > I realize that I could possibly muddle with the index.jsp page, but I
> > > would rather not if there is a more elegant solution. I am using CVS
> > > and Maven for my project.
> > >
> >
> > --
> > http://www.developertesting.com/
> > http://www.junitfactory.com
> >
> > ------------------------------------------------------------------------
> > -
> > This SF.net email is sponsored by DB2 Express Download DB2 Express C -
> > the FREE version of DB2 express and take control of your XML. No limits.
> > Just data. Click to get it now.
> > http://sourceforge.net/powerbar/db2/
> > _______________________________________________
> > Cruisecontrol-user mailing list
> > Cruisecontrol-user@...
> > https://lists.sourceforge.net/lists/listinfo/cruisecontrol-user
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by DB2 Express
> > Download DB2 Express C - the FREE version of DB2 express and take
> > control of your XML. No limits. Just data. Click to get it now.
> > http://sourceforge.net/powerbar/db2/
> > _______________________________________________
> > Cruisecontrol-user mailing list
> > Cruisecontrol-user@...
> > https://lists.sourceforge.net/lists/listinfo/cruisecontrol-user
> >
> 
> 
> -- 
> http://www.developertesting.com/
> http://www.junitfactory.com
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Cruisecontrol-user mailing list
> Cruisecontrol-user@...
> https://lists.sourceforge.net/lists/listinfo/cruisecontrol-user

I installed the windows exe on an XP machine. It appeared to start up fine.
However, when I realized that I actually wanted to move it to another
machine, I was unable to un-install it. I have attempted to do so from the
Windows Start/Remove Programs. From there, the uninstall appears to have
worked - it no longer appears in the list of installed programs.

However, the service is still listed under the services manager, and no
files were deleted from the drive.

Does anyone have any suggestions? Rebuilding the machine is not an option.

Thanks,

Tammy 



CONFIDENTIAL AND PRIVILEGED INFORMATION NOTICE

This e-mail, and any attachments, may contain information that
is confidential, subject to copyright, or exempt from disclosure.
Any unauthorized review, disclosure, retransmission, 
dissemination or other use of or reliance on this information 
may be unlawful and is strictly prohibited.  

AVIS D'INFORMATION CONFIDENTIELLE ET PRIVILÉGIÉE

Le présent courriel, et toute pièce jointe, peut contenir de 
l'information qui est confidentielle, régie par les droits 
d'auteur, ou interdite de divulgation. Tout examen, 
divulgation, retransmission, diffusion ou autres utilisations 
non autorisées de l'information ou dépendance non autorisée 
envers celle-ci peut être illégale et est strictement interdite.

Guten Tag,

Does an SVN label incrementer already exist?

Tx,

/U

 -------------- Original message ----------------------
From: Gisbert Amm <gia@...>
> You can set the attribute "defaultLabel" of the labelincementer to your 
> tag in config.xml.
> 
> If you want to change the label dynamically, you need to implement your 
> own labelincementer similar to the P4ChangelistLabelIncrementer
> 
> See
> http://www.nabble.com/Setting-the-label-of-a-project-to-the-current-SVN-revision
> -number-tf1750703.html#a5161326
> 
> -Gisbert
> 
> P.S.: Is there any particular reason why you've sent your posting to the 
> list several times? If you've done it on purpose: This behaviour will 
> not result in a quicker response, rather people will get annoyed and 
> won't answer at all.
> 
> prasad kumar wrote:
> > Hi all,
> >  
> > After tagging the project say for ex:build_xxx,while sending the mails 
> > to concerned persons also the build name(build_xxx) should be tag 
> > name(build_xxx).but in my case instead of taking the tag 
> > name(build_xxx)  as build name it is taking some other name as build  
> > name(build_yyy)  and this build name(build_yyy) automatically 
> > incrementing say ex:build_yyy_1...so on.
> >  
> > *how can we change the tag name as build name?*
> > *do i need to configure in config.xml or in some other place?*
> >  
> >  
> > if any persons knows  and respond that's a great appreciation
> >  
> > thanks,
> > prasad
> >  
> > 
> > ------------------------------------------------------------------------
> > Check out what you're missing if you're not on Yahoo! Messenger 
> > <http://us.rd.yahoo.com/mail/in/ymessenger/*http://in.messenger.yahoo.com/>
> > 
> > 
> > ------------------------------------------------------------------------
> > 
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by DB2 Express
> > Download DB2 Express C - the FREE version of DB2 express and take
> > control of your XML. No limits. Just data. Click to get it now.
> > http://sourceforge.net/powerbar/db2/
> > 
> > 
> > ------------------------------------------------------------------------
> > 
> > _______________________________________________
> > Cruisecontrol-user mailing list
> > Cruisecontrol-user@...
> > https://lists.sourceforge.net/lists/listinfo/cruisecontrol-user
> 
> -- 
> Gisbert Amm
> Softwareentwickler Infrastruktur
> Telefon: (0721) 91374 - 4224
> Telefax: (0721) 91374 - 2740
> E-Mail: gisbert.amm@...
> Internet: http://www.1und1.de
> 
> 1&1 Internet AG
> Elgendorfer Strasse 57
> 56410 Montabaur
> 
> Amtsgericht Montabaur HRB 6484
> 
> Vorstand: Ralph Dommermuth, Matthias Ehrlich, Andreas Gauger 
> (Vorsitzender), Matthias Greve, Henning Ahlert, Achim Weiss, Robert 
> Hoffmann,
> Aufsichtsratsvorsitzender: Michael Scheeren
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Cruisecontrol-user mailing list
> Cruisecontrol-user@...
> https://lists.sourceforge.net/lists/listinfo/cruisecontrol-user

Hi,
I've set up cruise control on debian sarge and it works great.=20
I'm now trying to get the buildresult web up and running.
=20
I've installed tomcat5.5 on Debian.
I built the cruisecontrol.war and put it in the tomcat webapps dir.
When i try to access the link to a build
(http://my_server:8180/cruisecontrol/buildresults/myproject?log=3Dlog2007=
05081
50819Lbuild.7 I get this result:
=20
access denied (java.util.PropertyPermission cruisecontrol.rmiport read)=20
java.security.AccessControlException: access denied
(java.util.PropertyPermission cruisecontrol.rmiport read)
 at
java.security.AccessControlContext.checkPermission(AccessControlContext.j=
ava
:264)
 at
java.security.AccessController.checkPermission(AccessController.java:427)=

 at java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
 at =
java.lang.SecurityManager.checkPropertyAccess(SecurityManager.java:1285)
 at java.lang.System.getProperty(System.java:628)
 at org.apache.jsp.main_jsp._jspService(main_jsp.java:133)
 at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 at
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.jav=
a:3
34)
 at =
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
 at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 at sun.reflect.GeneratedMethodAccessor83.invoke(Unknown Source)
 at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorI=
mpl
java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at =
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
 at java.security.AccessController.doPrivileged(Native Method)
 at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
 at =
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:275)
 at
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java=
:16
1)
 at
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Applicat=
ion
FilterChain.java:245)
 at
org.apache.catalina.core.ApplicationFilterChain.access$0(ApplicationFilte=
rCh
ain.java:177)
 at
org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterCh=
ain
java:156)
 at java.security.AccessController.doPrivileged(Native Method)
 at
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilte=
rCh
ain.java:152)
 at
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve=
ja
va:213)
 at
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve=
ja
va:178)
 at
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:=
126
)
 at
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:=
105
)
 at
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.j=
ava
:107)
 at
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:14=
8)
 at
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869=
)
 at
org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.proce=
ssC
onnection(Http11BaseProtocol.java:664)
 at
org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.=
jav
a:527)
 at
org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowe=
rWo
rkerThread.java:80)
 at
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.=
jav
a:684)
 at java.lang.Thread.run(Thread.java:595)
=20
Can anyone help me?
=20
Best Regards,
Tommy

Hi All,

CruiseControl is hanging after running for a few hours. I didn't install a
new version
I had some problems with getting new versions of the source
(modificationset) before, but i think this has notting to do with the
problem i have now.

In the log file is see the next lines..:

[thread 2452 also had an error]
# [ timer expired, abort... ]
[thread 2112 also had an error]


Because it takes a while before the problem occurs, turning on debug will
produce lots and lots of logging code.. (i didn't do that yet)

Anyone an idea what's going wrong? ( i know.. i have minimal info at the
moment)...

Thanks in advance!

Dear List

To keep the current buildnumber after an upgrade we copied the .ser
files of the old installation to the new one.
It worked fine. Anyways i would like to know if there is a
better/correct way to achieve the same (without the JMX console).

Thanks
Dominic

Hi,

I added the debug flag in ant. Got the following message when parsing an
xml file. I guess that in 2.6 we changed to
Saxon8 didn't we?

Any more ideas?

Cheers,

//mikael

ScriptRunner  - [junitreport] Parsing file:
'/view/eraonel_cruise/vobs/rbs/sw/rbssw_boam/boam_subsys/boam_swb/boam_b
ldu/ant_build/coverage/TEST-se.ericsson.wcdma.rbs.boam.mao.rmo.node.tb.s
ut.RbsSynchronizationMoImplTest.xml'
[cc]May-08 14:51:59 ScriptRunner  -=20
[cc]May-08 14:51:59 ScriptRunner  - BUILD FAILED
[cc]May-08 14:51:59 ScriptRunner  -
/view/eraonel_cruise/vobs/rbs/sw/rbssw_boam/boam_subsys/boam_swb/boam_bl
du/ant_build/common.xml:460: java.lang.OutOfMemoryError
[cc]May-08 14:51:59 ScriptRunner  -     at
org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:1
15)
[cc]May-08 14:51:59 ScriptRunner  -     at
org.apache.tools.ant.Task.perform(Task.java:348)
[cc]May-08 14:51:59 ScriptRunner  -     at
org.apache.tools.ant.Target.execute(Target.java:357)
[cc]May-08 14:51:59 ScriptRunner  -     at
org.apache.tools.ant.Target.performTasks(Target.java:385)
[cc]May-08 14:51:59 ScriptRunner  -     at
org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[cc]May-08 14:51:59 ScriptRunner  -     at
org.apache.tools.ant.Project.executeTarget(Project.java:1298)
[cc]May-08 14:51:59 ScriptRunner  -     at
org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecut
or.java:41)
[cc]May-08 14:51:59 ScriptRunner  -     at
org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[cc]May-08 14:51:59 ScriptRunner  -     at
org.apache.tools.ant.Main.runBuild(Main.java:698)
[cc]May-08 14:51:59 ScriptRunner  -     at
org.apache.tools.ant.Main.startAnt(Main.java:199)
[cc]May-08 14:51:59 ScriptRunner  -     at
org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
[cc]May-08 14:51:59 ScriptRunner  -     at
org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
[cc]May-08 14:51:59 ScriptRunner  - Caused by:
java.lang.OutOfMemoryError
[cc]May-08 14:51:59 ScriptRunner  - --- Nested Exception ---
[cc]May-08 14:51:59 ScriptRunner  - java.lang.OutOfMemoryError
[cc]May-08 14:51:59 ScriptRunner  -=20
[cc]May-08 14:51:59 ScriptRunner  - Total time: 12 minutes 46 seconds

I'm having trouble with the ignoreFiles in the modificationset with 
Clearcase.  My nightly build checks-in a new build.number file "artifact" 
during the build so it always results in a modification being detected for the 
next build.  I need to suppress this modification from triggering a new build 
unnecessarily.   I'm using ClearCase UCM which is not handled by the 
ignoreFiles, so I'm trying to use the <compound> statement with <triggers> and 
base ClearCase to look first for check-ins on the integration stream/branch 
and ignore the build.number file.  But the ignoreFiles doesn't seem to work 
and a modification is always returned and the nightly build still happens.    
Below is the modficationset section from  my project file:

		<modificationset ignoreFiles="*/build.number"
					     quietperiod="300">
			<compound includeTriggerChanges="false">
				<triggers>
					<clearcase 
branch="${integration_stream}"
							   
viewpath="${view.dir}\ixm_practice"/>
					<clearcase 
branch="${integration_stream}"
							   
viewpath="${view.dir}\ixm_gui_practice"/>
					<clearcase 
branch="${integration_stream}"
							   
viewpath="${view.dir}\ixm_installs_practice"/>
		        </triggers>
		        <targets>
						<ucm
						
	stream="${integration_stream}"
							viewpath="${view.dir}
\ixm_practice"
							contributors="true"/>
						<ucm
						
	stream="${integration_stream}"
							viewpath="${view.dir}
\ixm_gui_practice"
							contributors="true"/>
						<ucm
						
	stream="${integration_stream}"
							viewpath="${view.dir}
\ixm_installs_practice"
							contributors="true"/>
							
		        </targets>
		    </compound>
		</modificationset>


I also tried using various glob patterns and even absolute pathnames in the 
ignoreFiles but it still returns a modification set. 

Thanks for advice/suggestions on what to try next,
Regards
-Greg

Hi,

I am using cc 2.6 bin. When I start my build I get the follwing error
when I create my junitreport.
Any ideas why? What is failing? I have tried the usual ANT_OPTS and
CC_OPTS.

Any ideas?

Cheers,

//mikael


2007-05-08 13:20:04,847 [SocketListener0-2] WARN  CruiseControl
Reporting App - /rss:
java.lang.NullPointerException
        at java.util.Calendar.setTime(Calendar.java:902)  =20
        at java.text.SimpleDateFormat.format(SimpleDateFormat.java:782)
        at java.text.SimpleDateFormat.format(SimpleDateFormat.java:775)
        at java.text.DateFormat.format(DateFormat.java:314)
        at org.apache.jsp.rss_jsp._jspService(rss_jsp.java:230)
        at
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
        at
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.ja
va:324)
        at
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
        at
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
        at
org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:427)
        at
org.mortbay.jetty.servlet.WebApplicationHandler.dispatch(WebApplicationH
andler.java:475)
        at
org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:556)
        at org.mortbay.http.HttpContext.handle(HttpContext.java:1563)
        at
org.mortbay.jetty.servlet.WebApplicationContext.handle(WebApplicationCon
text.java:623)
        at org.mortbay.http.HttpContext.handle(HttpContext.java:1515)
        at org.mortbay.http.HttpServer.service(HttpServer.java:956)
        at
org.mortbay.http.HttpConnection.service(HttpConnection.java:814)
        at
org.mortbay.http.HttpConnection.handleNext(HttpConnection.java:981)
        at
org.mortbay.http.HttpConnection.handle(HttpConnection.java:831)
        at
org.mortbay.http.SocketListener.handleConnection(SocketListener.java:244
)
        at
org.mortbay.util.ThreadedServer.handle(ThreadedServer.java:357)
        at
org.mortbay.util.ThreadPool$PoolThread.run(ThreadPool.java:534)
2007-05-08 13:20:23,667 [Thread-11] WARN  ScriptRunner     -    =20
2007-05-08 13:20:23,667 [Thread-11] WARN  ScriptRunner     - BUILD
FAILED
2007-05-08 13:20:23,667 [Thread-11] WARN  ScriptRunner     -
/view/eraonel_cruise/vobs/rbs/sw/rbssw_boam/boam_subsys/boam_swb/boam_bl
du/ant_build/common.xml:460: java.lang.OutOfMemoryError=20

The cvs log command (and the rlog for that matter) is run with two
timestamps, the time of the previous build and the time from the
current build and what is returned are the changes committed to the
repository in that interval. Local changes have no effect on the
results return.

If you point the bootstrapper at a file it will update the file.  If
you point it at a directory it will update that directory and all of
its children (recursively).

Jtf

On 5/7/07, lightbulb432 <veerukrishnan@...> wrote:
>
> When you use localworkingcopy, what does CruiseControl compare the current
> working copy to in order to decide whether a build from the modificationset
> is necessary?
>
> By the way, what would you use a cvsbootstrapper for, apart from getting
> your latest build file? Anything...?
>
> Jeffrey Fredrick-2 wrote:
> >
> > When you provide the localworkingcopy you are doing a "cvs log"
> > command; when you provide the cvsroot & module you're doing a "cvs
> > rlog" command.
> >
> > Consider a repository like this:
> >
> >   /cvsroot/moduleA/subdirB
> >                             /subdirC
> >
> > If in your local workspace you have moduleA and sbudirB but not
> > subdirC then the "cvs log" will NOT return changes in subdirC but "cvs
> > rlog" will.  Depending on your scenario this can be either a good
> > thing or a bad thing:
> >
> >   Good thing:  subdirC is a large directory that takes a long time to
> > poll but isn't used by the build target you are calling.  By skipping
> > this you avoid reporting changes you don't care about and the
> > modification check takes longer.
> >
> >   Bad thing:  subdirC was just added to your project and you don't
> > know it, so you don't have it locally.
> >
> > You can mitigate the "bad thing" case by using the cvsbootstrapper to
> > update your localworkspace (cvs update -dP) prior to building.
> >
> > Jtf
> >
> > On 5/7/07, lightbulb432 <veerukrishnan@...> wrote:
> >>
> >> When would you use the cvs localworkingcopy attribute as opposed to both
> >> cvsroot and module? I'm under the understanding that you'd only ever use
> >> the
> >> latter to trigger a build when the repository itself has changed. If you
> >> specify the path to the localworkingcopy instead, how would CruiseControl
> >> know when the repository has changed?
> >>
> >> Or have I misinterpreted this?
> >>

-- 
http://www.developertesting.com/
http://www.junitfactory.com