Bacula

I was wondering if there were options that could be given to the windows 
installation program of bacula.

What I'd like to do is create a bat file which could automate the 
installation of the program for my windows users who need a backup 
solution. This would prevent users from having to configure the file 
daemon on their computers.

For example, to specify the installation director and name of the fd I 
could write:

winbacula-1.34.6.exe -d c:\bacula -n workstation-001-fd

I am having trouble getting my SAIT autoloader to work with bacula.  in
particular I am getting:

./mtx-changer: line 112: mtx: command not found

when I try to run:

/mtx-changer /dev/sg3 load 1  /dev/nst0 0

any ideas, or is sait supported?  In addition if anyone has their sait
single drive or autoloader, I would appreciate the appropriate snippets
from the storage demon.  That might save me a bit of work.

hello

I get this error when I do a VolumeToCatalog verification of a backup of a 
win2K box, the backup itself successeds. All my other clients are Linux and 
seem to work fine during verification. Also the SD is located on a Multihomed 
machine and the win2k client is the only FD client on this interface, all the 
Linux clients are on another interface. The log is below

(could this be a firewall issue?)

26-Jan 04:09 BACKUP01: Start Verify JobId=272 Level=VolumeToCatalog Job=SPAZZ-
VERIFY.2005-01-26_01.00.09
26-Jan 04:09 BACKUP01: Verifying against JobId=267 Job=SPAZZ.2005-01-26_01.00.04
26-Jan 04:09 BACKUP01: Bootstrap records written 
to /var/bacula/working/restore.bsr
26-Jan 04:09 BACKUP01: 
26-Jan 04:09 BACKUP01: The job will require the following Volumes:
26-Jan 04:09 BACKUP01:    
26-Jan 04:09 BACKUP01:    HD-TUESDAY
26-Jan 04:09 BACKUP01: 
26-Jan 04:09 BACKUP01: SPAZZ-VERIFY.2005-01-26_01.00.09 Fatal error: No Volume 
names found for restore.
26-Jan 04:18 SPAZZ: SPAZZ-VERIFY.2005-01-26_01.00.09 Fatal 
error: ..\filed\../../filed/job.c:1572 Bad response to Read Data command. 
Wanted 3000 OK data
, got 3000 error

26-Jan 04:09 BACKUP01: SPAZZ-VERIFY.2005-01-26_01.00.09 Fatal error: No Job 
status returned from FD.
26-Jan 04:09 BACKUP01: SPAZZ-VERIFY.2005-01-26_01.00.09 Error: Bacula 1.36.1 
(26Nov04): 26-Jan-2005 04:09:26
  JobId:                  272
  Job:                    SPAZZ-VERIFY.2005-01-26_01.00.09
  FileSet:                FULL SYSTEM WINDOWS
  Verify Level:           VolumeToCatalog
  Client:                 SPAZZ
  Verify JobId:           267
  Verify Job:             SPAZZ
  Start time:             26-Jan-2005 04:09:23
  End time:               26-Jan-2005 04:09:26
  Files Expected:         51,212
  Files Examined:         0
  Non-fatal FD errors:    0
  FD termination status:  Error
  SD termination status:  Error
  Termination:            *** Verify Error ***

>>>>> On Tue, 25 Jan 2005 12:17:14 +0100, Leire Cristobo <lcristobo@...> said:

  Leire> and in messages appears the following lines:

  Leire> 25-Jan-2005 11:59 gorbea-dir: Begin pruning Jobs.
  Leire> 25-Jan-2005 11:59 gorbea-dir: Query failed: CREATE TABLE DelCandidates (JobId INTEGER UNSIGNED NOT NULL, PurgedFiles TINYINT, FileSetId INTEGER UNSIGNED, JobFiles INTEGER UNSIGNED, JobStatus BINARY(1)): ERR=Error writing file './bacula/DelCandidates.frm' (Errcode: 28)
  Leire> 25-Jan-2005 11:59 gorbea-dir: Begin pruning Files.
  Leire> 25-Jan-2005 11:59 gorbea-dir: No Files found to prune.
  Leire> 25-Jan-2005 11:59 gorbea-dir: End auto prune.

  Leire> And when I tried updating tables:
  Leire> /etc/bacula# ./update_bacula_tables
  Leire> Altering MySQL tables

  Leire> Depending on the size of your database,
  Leire> this script may take several minutes to run.

  Leire> ERROR 1060 at line 3: Duplicate column name 'InChanger'
  Leire> ERROR 1060 at line 4: Duplicate column name 'MediaAddressing'
  Leire> ERROR 1060 at line 5: Duplicate column name 'VolReadTime'
  Leire> ERROR 1060 at line 6: Duplicate column name 'VolWriteTime'
  Leire> ERROR 1060 at line 8: Duplicate column name 'Enabled'
  Leire> ERROR 1060 at line 9: Duplicate column name 'ScratchPoolId'
  Leire> ERROR 1060 at line 10: Duplicate column name 'RecyclePoolId'
  Leire> ERROR 3 at line 15: Error writing file './bacula/BaseFiles.frm' (Errcode: 28)
  Leire> ERROR 3 at line 25: Error writing file './bacula/UnsavedFiles.frm' (Errcode: 28)
  Leire> ERROR 1051 at line 33: Unknown table 'BaseFiles'
  Leire> ERROR 3 at line 35: Error writing file './bacula/BaseFiles.frm' (Errcode: 28)
  Leire> ERROR 1005 at line 44: Can't create table './bacula/Version' (errno: 28)
  Leire> ERROR 1017 at line 45: Can't find file: 'Version.MYD' (errno: 2)
  Leire> Update of Bacula MySQL tables succeeded.

The errno 28 means "No space left on device" on Linux, so maybe the filesystem
containing the MySQL database is full?

__Martin

Le mar 25/01/2005 à 19:29, Tim Oberfoell a écrit :
> Hello!
> 
> On Tuesday 25 January 2005 17:39, you wrote:
> > Hello,
> >
> > I am using Fedora Core 3 standard kernel 2.6.9-1.724_FC3smp x86_64 with
> > the standard reiserFS support.  Mounted it with acl and use the standard
> > getfacl and setfacl commands.  Here are some details though I am doing
> > my own research as well.
> >
> > RPMs:
> > reiserfs-utils-3.6.18-1
> > acl-2.2.23-5
> 
> I have no experience with ACL support on reiserfs, but a quick look at my 
> current kernelconfig does not show any ACL support, but maybe it's just a 
> patch.
> 
> Nevertheless if getfacl/sefacl and the libacl itself support reiserfs there is 
> a good chance that Bacula will support this filesystem too, because Bacula 
> uses this library.
> 
> The error message you posted before is an implementation problem, that occures 
> also on ext3 and xfs and it will be solved soon.

I hope so ;-)

> 
> Regards,
> Tim
> 
> > I guess I should have went with XFS for my data partition so things were
> > supported a bit better.  I have had some ALC related issues with Samba
> > as well.
> >
> > TTYL, Jeff
> >
> > Tim Oberfoell wrote:
> > >Hello Jeff,
> > >
> > >currently ACLs on a Reiser filesystem are not supported, only ext3 and
> > > xfs. Also there are some problems in the current implementation, but we
> > > are working on that.
> > >
> > >Maybe I'm able to extend the code to support ReiserFS. Can you please mail
> > > me which tool you are using to set/read the ACLs?
> > >
> > >At the moment my bachelor of science takes all my time, so please have a
> > >little patience.
> > >
> > >Regards,
> > >Tim
> > >
> > >On Monday 24 January 2005 15:04, Jeff Williams wrote:
> > >>Hello,
> > >>
> > >>Wondering if anyone else uses Bacula with ReiserFS and ACL support?  My
> > >>backups seem to be fine and my resotres restore the correct data but I
> > >>get the following errors during the restore:
> > >>
> > >>toronto-fd: drwx---r-x  19 jeff     Domain U    1512 2005-01-23 17:06:06
> > >>/tmp/bacula-restores/data/home/jeff/
> > >>24-Jan 08:43 toronto-fd: RestoreFiles.2005-01-24_08.36.01 Warning:
> > >>restore.c:330 Failure in the ACL of
> > >>/tmp/bacula-restores/data/home/jeff/! FD is not able to restore it!
> > >>24-Jan 08:43 toronto-fd: RestoreFiles.2005-01-24_08.36.01 Warning:
> > >>restore.c:339 Error! Can't restore ACL of directory:
> > >>/tmp/bacula-restores/data/home/jeff/! Maybe system does not support ACLs!
> > >>
> > >>
> > >>I know ReiserFS supports the ACLs (I use them) and I believe they are
> > >>Posix compliant.  Haven't looked at the Bacula code (yet), thought I
> > >>would ask if others have been sucessful.  I'll start wandering through
> > >>the code for ReiseFS ACL and Bacula once I get some extra time tonight.
> > >>
> > >>Thanks, Jeff
> > >>
> > >>

I'd use "update volume" in bconsole to select the pool and work through the=
 medialist (each volume) to make sure everything was setup correctly.

/Jens=20

> Thanks for the help, I didn't really notice that part.
> I did update from pools, but when I do list volumes the VolRetention=20
> shows values different than those were shown when I did update.
>=20
> Jens R. Victorin wrote:
>=20
> >Use "list volumes" in bconsole to check that your volumes have correct r=
etention periods etc. Remember that the values specified in the pool resour=
ce is used only when a new volume is added to the pool. If you change the v=
alues in the conf file you will have to update each volume belonging to the=
 pool as well.
> >
> >See: http://www.bacula.org/rel-manual/dirdconf.html#PoolResource
> >
> >/Jens
> >
> > =20
> >
> >>This is my pool section
> >>
> >>Pool {
> >> Name =3D "Daily"
> >> Pool Type =3D Backup
> >> Recycle =3D yes                       # Bacula can automatically recyc=
le=20
> >>Volumes
> >> AutoPrune =3D yes                     # Prune expired volumes
> >> Volume Retention =3D 31 days          # 1 months
> >> Volume Use Duration =3D 6 days        # 6 days and use the next tape
> >> Recycle Oldest Volume =3D yes
> >> Accept Any Volume =3D yes             # write on any volume in the poo=
l
> >>}
> >>
> >>doesn't this mean that it will be used for 6 days starting the count=20
> >>from the first write to volume (including that day) ?. It still wrote o=
n=20
> >>the same tape after more than 9 days now
> >>
> >>Jens R. Victorin wrote:
> >>
> >>   =20
> >>
> >>><< Ursprungsmeddelandet bifogat >>
> >>><< Original message attached >>
> >>>
> >>>It is working!=20
> >>>
> >>>/Jens
> >>>     =20
> >>>
> >
> > =20
> >
> >>>>>Hi,
> >>>>>
> >>>>>   I am trying to use the "Volume Use Duration" directive but it see=
ms=20
> >>>>>not to be working for me, I have a pool with the duration set to 6 d=
ays=20
> >>>>>and it is still used after more than a week.
> >>>>>  =20
> >>>>>
> >>>>>         =20
> >>>>>
> >>>>You are not asking anything. Is it deliberate?
> >>>>
> >>>>/Jens
> >>>>
> >>>>
> >>>>=20
> >>>>
> >>>>       =20
> >>>>
> >>>I had the question up there, does it work for anybody or is it just me=
 ?
> >>>
> >>>     =20
> >>>
> >
> >
> > =20
> >
>=20
> --=20
> Taymour A El Erian
> System Division Manager
> RHCE, CNA, MCSE, CCNA, LPIC
> TE Data
> E-mail: taymour.elerian@...
> Web:     http://www.tedata.net
> Tel:    +(202)-4166600
> Fax:=09+(202)-4166700
> Ext:    1101
>=20
>=20
>=20
>=20
> -------------------------------------------------------
> This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
> Tool for open source databases. Create drag-&-drop reports. Save time
> by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
> Download a FREE copy at http://www.intelliview.com/go/osdn_nl
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@...
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>