Anti-Spam SMTP Proxy Server

Yes version after build 12057 require some more memory.

You use a 64 bit perl - which requires ~ two times the memory of a 32 bit 
perl, without any advantage!  I run on 32 bit , 5 workers , all plugins, 
full config with sync, SNMP agent loaded with ~ 430MB RAM

Thomas



Von:    Doug Lytle <support@...>
An:     ASSP development mailing list <assp-test@...>
Datum:  27.03.2012 22:06
Betreff:        [Assp-test] Memory footprint



I upgrade this morning from ASSP 2.1.2 (12057) to 12085, around 2 hours 
later, the ASSP Virtual Machine, with 1GB memory was swapping something 
awful.

I eventually had to kill -9 assp.pl before I could do anything, doing a 
-TERM ended all the works except Worker 10000.

I then upgraded to 12087 (Current) and see the memory creep up.  For the 
last 7 days, I was sitting at 80% memory usage, the graphs are now 
showing 97%.  This is a very lightly loaded machine, 6 users total.

Is this to be expected?

The machine is running Debian 6
1GB memory
perl -v

This is perl, v5.10.1 (*) built for x86_64-linux-gnu-thread-multi
(with 56 registered patches, see perl -V for more detail)


Doug

-- 
Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary 
Safety, deserve neither Liberty nor Safety."


------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here 
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Assp-test mailing list
Assp-test@...
https://lists.sourceforge.net/lists/listinfo/assp-test




DISCLAIMER:
*******************************************************
This email and any files transmitted with it may be confidential, legally 
privileged and protected in law and are intended solely for the use of the 

individual to whom it is addressed.
This email was multiple times scanned for viruses. There should be no 
known virus in this email!
*******************************************************

You learn something new every day.

Would you recommend using a full 32bit operating system over a 64 bit 
operating system or is it just down the the perl version that makes a 
difference?

All the best,
Colin.

On 28/03/2012 18:17, Thomas Eckardt wrote:
> Yes version after build 12057 require some more memory.
>
> You use a 64 bit perl - which requires ~ two times the memory of a 32 bit
> perl, without any advantage!  I run on 32 bit , 5 workers , all plugins,
> full config with sync, SNMP agent loaded with ~ 430MB RAM
>
> Thomas
>
>
>
> Von:    Doug Lytle<support@...>
> An:     ASSP development mailing list<assp-test@...>
> Datum:  27.03.2012 22:06
> Betreff:        [Assp-test] Memory footprint
>
>
>
> I upgrade this morning from ASSP 2.1.2 (12057) to 12085, around 2 hours
> later, the ASSP Virtual Machine, with 1GB memory was swapping something
> awful.
>
> I eventually had to kill -9 assp.pl before I could do anything, doing a
> -TERM ended all the works except Worker 10000.
>
> I then upgraded to 12087 (Current) and see the memory creep up.  For the
> last 7 days, I was sitting at 80% memory usage, the graphs are now
> showing 97%.  This is a very lightly loaded machine, 6 users total.
>
> Is this to be expected?
>
> The machine is running Debian 6
> 1GB memory
> perl -v
>
> This is perl, v5.10.1 (*) built for x86_64-linux-gnu-thread-multi
> (with 56 registered patches, see perl -V for more detail)
>
>
> Doug
>
>
>
> ------------------------------------------------------------------------------
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here
> http://p.sf.net/sfu/sfd2d-msazure
>
>
> _______________________________________________
> Assp-test mailing list
> Assp-test@...
> https://lists.sourceforge.net/lists/listinfo/assp-test

Thomas, what OS do you run ASSP on?

Regards, 
 
Andrew



-----Original Message-----
From: Thomas Eckardt [mailto:Thomas.Eckardt@...] 
Sent: Wednesday, March 28, 2012 1:17 PM
To: ASSP development mailing list
Subject: [Assp-test] Antwort: Memory footprint

Yes version after build 12057 require some more memory.

You use a 64 bit perl - which requires ~ two times the memory of a 32 bit perl, without any advantage!  I run on 32 bit , 5 workers , all plugins, full config with sync, SNMP agent loaded with ~ 430MB RAM

Thomas



Von:    Doug Lytle <support@...>
An:     ASSP development mailing list <assp-test@...>
Datum:  27.03.2012 22:06
Betreff:        [Assp-test] Memory footprint



I upgrade this morning from ASSP 2.1.2 (12057) to 12085, around 2 hours later, the ASSP Virtual Machine, with 1GB memory was swapping something awful.

I eventually had to kill -9 assp.pl before I could do anything, doing a -TERM ended all the works except Worker 10000.

I then upgraded to 12087 (Current) and see the memory creep up.  For the last 7 days, I was sitting at 80% memory usage, the graphs are now showing 97%.  This is a very lightly loaded machine, 6 users total.

Is this to be expected?

The machine is running Debian 6
1GB memory
perl -v

This is perl, v5.10.1 (*) built for x86_64-linux-gnu-thread-multi (with 56 registered patches, see perl -V for more detail)


Doug

--
Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety."


------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here 
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Assp-test mailing list
Assp-test@...
https://lists.sourceforge.net/lists/listinfo/assp-test




DISCLAIMER:
*******************************************************
This email and any files transmitted with it may be confidential, legally 
privileged and protected in law and are intended solely for the use of the 

individual to whom it is addressed.
This email was multiple times scanned for viruses. There should be no 
known virus in this email!
*******************************************************

The Perl version only - at least this is only memory related.

Thomas




Von:    Colin <assp@...>
An:     assp-test@...
Datum:  28.03.2012 20:52
Betreff:        Re: [Assp-test] Antwort:  Memory footprint



You learn something new every day.

Would you recommend using a full 32bit operating system over a 64 bit 
operating system or is it just down the the perl version that makes a 
difference?

All the best,
Colin.

On 28/03/2012 18:17, Thomas Eckardt wrote:
> Yes version after build 12057 require some more memory.
>
> You use a 64 bit perl - which requires ~ two times the memory of a 32 
bit
> perl, without any advantage!  I run on 32 bit , 5 workers , all plugins,
> full config with sync, SNMP agent loaded with ~ 430MB RAM
>
> Thomas
>
>
>
> Von:    Doug Lytle<support@...>
> An:     ASSP development mailing list<assp-test@...>
> Datum:  27.03.2012 22:06
> Betreff:        [Assp-test] Memory footprint
>
>
>
> I upgrade this morning from ASSP 2.1.2 (12057) to 12085, around 2 hours
> later, the ASSP Virtual Machine, with 1GB memory was swapping something
> awful.
>
> I eventually had to kill -9 assp.pl before I could do anything, doing a
> -TERM ended all the works except Worker 10000.
>
> I then upgraded to 12087 (Current) and see the memory creep up.  For the
> last 7 days, I was sitting at 80% memory usage, the graphs are now
> showing 97%.  This is a very lightly loaded machine, 6 users total.
>
> Is this to be expected?
>
> The machine is running Debian 6
> 1GB memory
> perl -v
>
> This is perl, v5.10.1 (*) built for x86_64-linux-gnu-thread-multi
> (with 56 registered patches, see perl -V for more detail)
>
>
> Doug
>
>
>
> 
------------------------------------------------------------------------------
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here
> http://p.sf.net/sfu/sfd2d-msazure
>
>
> _______________________________________________
> Assp-test mailing list
> Assp-test@...
> https://lists.sourceforge.net/lists/listinfo/assp-test

------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here 
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Assp-test mailing list
Assp-test@...
https://lists.sourceforge.net/lists/listinfo/assp-test




DISCLAIMER:
*******************************************************
This email and any files transmitted with it may be confidential, legally 
privileged and protected in law and are intended solely for the use of the 

individual to whom it is addressed.
This email was multiple times scanned for viruses. There should be no 
known virus in this email!
*******************************************************

W2K3 and W2K8R2 and SLES/OES2

all with perl 5.12 (32 bit) or perl 5.14 (32 bit)

Thomas


Von:    "Dubas, Andrew" <adubas@...>
An:     ASSP development mailing list <assp-test@...>
Datum:  28.03.2012 21:31
Betreff:        Re: [Assp-test] Antwort:  Memory footprint




Thomas, what OS do you run ASSP on?

Regards, 
 
Andrew



-----Original Message-----
From: Thomas Eckardt [mailto:Thomas.Eckardt@...] 
Sent: Wednesday, March 28, 2012 1:17 PM
To: ASSP development mailing list
Subject: [Assp-test] Antwort: Memory footprint

Yes version after build 12057 require some more memory.

You use a 64 bit perl - which requires ~ two times the memory of a 32 bit 
perl, without any advantage!  I run on 32 bit , 5 workers , all plugins, 
full config with sync, SNMP agent loaded with ~ 430MB RAM

Thomas



Von:    Doug Lytle <support@...>
An:     ASSP development mailing list <assp-test@...>
Datum:  27.03.2012 22:06
Betreff:        [Assp-test] Memory footprint



I upgrade this morning from ASSP 2.1.2 (12057) to 12085, around 2 hours 
later, the ASSP Virtual Machine, with 1GB memory was swapping something 
awful.

I eventually had to kill -9 assp.pl before I could do anything, doing a 
-TERM ended all the works except Worker 10000.

I then upgraded to 12087 (Current) and see the memory creep up.  For the 
last 7 days, I was sitting at 80% memory usage, the graphs are now showing 
97%.  This is a very lightly loaded machine, 6 users total.

Is this to be expected?

The machine is running Debian 6
1GB memory
perl -v

This is perl, v5.10.1 (*) built for x86_64-linux-gnu-thread-multi (with 56 
registered patches, see perl -V for more detail)


Doug

--
Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary 
Safety, deserve neither Liberty nor Safety."


------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here 
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Assp-test mailing list
Assp-test@...
https://lists.sourceforge.net/lists/listinfo/assp-test




DISCLAIMER:
*******************************************************
This email and any files transmitted with it may be confidential, legally 
privileged and protected in law and are intended solely for the use of the 


individual to whom it is addressed.
This email was multiple times scanned for viruses. There should be no 
known virus in this email!
*******************************************************




------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here 
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Assp-test mailing list
Assp-test@...
https://lists.sourceforge.net/lists/listinfo/assp-test




DISCLAIMER:
*******************************************************
This email and any files transmitted with it may be confidential, legally 
privileged and protected in law and are intended solely for the use of the 

individual to whom it is addressed.
This email was multiple times scanned for viruses. There should be no 
known virus in this email!
*******************************************************

Michael,

>~From: \"\|~=>100

remove this line or add 

a-d-n-o-r

as first line to the file


The optimizer makes a mistake on the line    ~From: \"\|~=>100   and as 
result, the complete reges is unusable - I'll try to fix this

btw.: what oprimizer version do you use ? At least I use the latest 
modules and it is not working.

Thomas



Von:    Michael Thomas <mike@...>
An:     ASSP development mailing list <assp-test@...>
Datum:  27.03.2012 21:06
Betreff:        [Assp-test] Regex fails to trigger



Thomas,

ASSP version 2.1.2(12085)

Since approximately version 2.1.2  build (12057), the some regex fail to 
trigger. Containing a vertical bar or digits as in the examples below. 
In all cases, the recipient was NOT Spamlover or NoProcessing. There 
were no errors in the regex file. That is, the regex should have 
triggered.

The ~From: \"\|~=>100 is new, but the others have been in the file for a 
long time and used to trigger.

I have example messages set aside. If you need them, let me know how to 
send to you.

bombheadere
===============
Regex

Thomas,

Ahhh. The time frame would relate to when I entered that regex.

Regex::Optimizer 1.08 / 1.07

Michael Thomas
Mathbox
978-687-3300
Toll Free: 1-877-MATHBOX (1-877-628-4269)

On 3/28/2012 2:47 PM, Thomas Eckardt wrote:
> Michael,
>
>> ~From: \"\|~=>100
>
> remove this line or add
>
> a-d-n-o-r
>
> as first line to the file
>
>
> The optimizer makes a mistake on the line    ~From: \"\|~=>100   and as
> result, the complete reges is unusable - I'll try to fix this
>
> btw.: what oprimizer version do you use ? At least I use the latest
> modules and it is not working.
>
> Thomas
>
>
>
> Von:    Michael Thomas<mike@...>
> An:     ASSP development mailing list<assp-test@...>
> Datum:  27.03.2012 21:06
> Betreff:        [Assp-test] Regex fails to trigger
>
>
>
> Thomas,
>
> ASSP version 2.1.2(12085)
>
> Since approximately version 2.1.2  build (12057), the some regex fail to
> trigger. Containing a vertical bar or digits as in the examples below.
> In all cases, the recipient was NOT Spamlover or NoProcessing. There
> were no errors in the regex file. That is, the regex should have
> triggered.
>
> The ~From: \"\|~=>100 is new, but the others have been in the file for a
> long time and used to trigger.
>
> I have example messages set aside. If you need them, let me know how to
> send to you.
>
> bombheadere
> ===============
> Regex
>
>
>
>
> Message Text
>
>
>
>
>
> bombheadere
> ===============
> Regex (mail wrapping)
>
>
>
>
> Message Text
>
>
>
>
>
> bombdatare EX1
> ===============
> Regex
>
>
>
>
>
>
>
> Message MIME (mail wrapping)
> MIME is basically empty
>
>
>
>
>
>
>
>
>
>
> Message MIME (mail wrapping)
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> DISCLAIMER:
> *******************************************************
> This email and any files transmitted with it may be confidential, legally
> privileged and protected in law and are intended solely for the use of the
>
> individual to whom it is addressed.
> This email was multiple times scanned for viruses. There should be no
> known virus in this email!
> *******************************************************
>
>
>
>
>
>
>
> ------------------------------------------------------------------------------
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here
> http://p.sf.net/sfu/sfd2d-msazure
>
>
>
> _______________________________________________
> Assp-test mailing list
> Assp-test@...
> https://lists.sourceforge.net/lists/listinfo/assp-test

You may also try to replace the   \|  by \x7C  or  \124  and use the 
optimizer.

Thomas




Von:    Michael Thomas <mike@...>
An:     ASSP development mailing list <assp-test@...>
Datum:  28.03.2012 21:10
Betreff:        Re: [Assp-test] Antwort:  Regex fails to trigger



Thomas,

Ahhh. The time frame would relate to when I entered that regex.

Regex::Optimizer 1.08 / 1.07

Michael Thomas
Mathbox
978-687-3300
Toll Free: 1-877-MATHBOX (1-877-628-4269)

On 3/28/2012 2:47 PM, Thomas Eckardt wrote:
> Michael,
>
>> ~From: \"\|~=>100
>
> remove this line or add
>
> a-d-n-o-r
>
> as first line to the file
>
>
> The optimizer makes a mistake on the line    ~From: \"\|~=>100   and as
> result, the complete reges is unusable - I'll try to fix this
>
> btw.: what oprimizer version do you use ? At least I use the latest
> modules and it is not working.
>
> Thomas
>
>
>
> Von:    Michael Thomas<mike@...>
> An:     ASSP development mailing list<assp-test@...>
> Datum:  27.03.2012 21:06
> Betreff:        [Assp-test] Regex fails to trigger
>
>
>
> Thomas,
>
> ASSP version 2.1.2(12085)
>
> Since approximately version 2.1.2  build (12057), the some regex fail to
> trigger. Containing a vertical bar or digits as in the examples below.
> In all cases, the recipient was NOT Spamlover or NoProcessing. There
> were no errors in the regex file. That is, the regex should have
> triggered.
>
> The ~From: \"\|~=>100 is new, but the others have been in the file for a
> long time and used to trigger.
>
> I have example messages set aside. If you need them, let me know how to
> send to you.
>
> bombheadere
> ===============
> Regex
>
>
>
>
> Message Text
>
>
>
>
>
> bombheadere
> ===============
> Regex (mail wrapping)
>
>
>
>
> Message Text
>
>
>
>
>
> bombdatare EX1
> ===============
> Regex
>
>
>
>
>
>
>
> Message MIME (mail wrapping)
> MIME is basically empty
>
>
>
>
>
>
>
>
>
>
> Message MIME (mail wrapping)
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> DISCLAIMER:
> *******************************************************
> This email and any files transmitted with it may be confidential, 
legally
> privileged and protected in law and are intended solely for the use of 
the
>
> individual to whom it is addressed.
> This email was multiple times scanned for viruses. There should be no
> known virus in this email!
> *******************************************************
>
>
>
>
>
>
>
> 
------------------------------------------------------------------------------
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here
> http://p.sf.net/sfu/sfd2d-msazure
>
>
>
> _______________________________________________
> Assp-test mailing list
> Assp-test@...
> https://lists.sourceforge.net/lists/listinfo/assp-test


------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here 
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Assp-test mailing list
Assp-test@...
https://lists.sourceforge.net/lists/listinfo/assp-test




DISCLAIMER:
*******************************************************
This email and any files transmitted with it may be confidential, legally 
privileged and protected in law and are intended solely for the use of the 

individual to whom it is addressed.
This email was multiple times scanned for viruses. There should be no 
known virus in this email!
*******************************************************

Where do I download ASSP 2.1.2 (12057)?

Regards,
Pontus

-----Original Message-----
From: Doug Lytle [mailto:support@...] 
Sent: den 28 mars 2012 01:40
To: ASSP development mailing list
Subject: Re: [Assp-test] Memory footprint

Doug Lytle wrote:
> I upgrade this morning from ASSP 2.1.2 (12057)

I reverted back to 12057 and memory usage has stabilized.

Doug


--
Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary
Safety, deserve neither Liberty nor Safety."


----------------------------------------------------------------------------
--
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Assp-test mailing list
Assp-test@...
https://lists.sourceforge.net/lists/listinfo/assp-test

http://assp.cvs.sourceforge.net/viewvc/assp/assp2/

You can look at the historical versions of any file there.

Incidentally, I run minimum of 4GB memory for ASSP 2 and wouldn't try to 
fit it on 1GB. I/O is currently my bottleneck as I'm having problems 
with paravirtualisation but that is another story.

All the best,
Colin.


On 28/03/2012 09:28, Pontus Karlsson wrote:
> Where do I download ASSP 2.1.2 (12057)?
>
> Regards,
> Pontus
>
> -----Original Message-----
> From: Doug Lytle [mailto:support@...]
> Sent: den 28 mars 2012 01:40
> To: ASSP development mailing list
> Subject: Re: [Assp-test] Memory footprint
>
> Doug Lytle wrote:
>> I upgrade this morning from ASSP 2.1.2 (12057)
> I reverted back to 12057 and memory usage has stabilized.
>
> Doug
>
>
> --
> Ben Franklin quote:
>
> "Those who would give up Essential Liberty to purchase a little Temporary
> Safety, deserve neither Liberty nor Safety."
>
>
> ----------------------------------------------------------------------------
> --
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here
> http://p.sf.net/sfu/sfd2d-msazure
> _______________________________________________
> Assp-test mailing list
> Assp-test@...
> https://lists.sourceforge.net/lists/listinfo/assp-test
>
>
>
> ------------------------------------------------------------------------------
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here
> http://p.sf.net/sfu/sfd2d-msazure
> _______________________________________________
> Assp-test mailing list
> Assp-test@...
> https://lists.sourceforge.net/lists/listinfo/assp-test

Hi again!

Check!

Related question:
I'm running an older 2.1.1 version on the server I wanna upgrade version on
and when looking under "server information" at the "info and stats" page it
say that I run perl 5.010001, but I know for a fact that it's
5.10.1.(reading the perl -v output)
Is this just an old bug or does ASSP read perl version from somewhere else?
I would take the info from Perl -v before ASSP, but it makes me wonder...

Regards,
Pontus

-----Original Message-----
From: Colin [mailto:assp@...] 
Sent: den 28 mars 2012 10:38
To: assp-test@...
Subject: Re: [Assp-test] Memory footprint

http://assp.cvs.sourceforge.net/viewvc/assp/assp2/

You can look at the historical versions of any file there.

Incidentally, I run minimum of 4GB memory for ASSP 2 and wouldn't try to fit
it on 1GB. I/O is currently my bottleneck as I'm having problems with
paravirtualisation but that is another story.

All the best,
Colin.


On 28/03/2012 09:28, Pontus Karlsson wrote:
> Where do I download ASSP 2.1.2 (12057)?
>
> Regards,
> Pontus
>
> -----Original Message-----
> From: Doug Lytle [mailto:support@...]
> Sent: den 28 mars 2012 01:40
> To: ASSP development mailing list
> Subject: Re: [Assp-test] Memory footprint
>
> Doug Lytle wrote:
>> I upgrade this morning from ASSP 2.1.2 (12057)
> I reverted back to 12057 and memory usage has stabilized.
>
> Doug
>
>
> --
> Ben Franklin quote:
>
> "Those who would give up Essential Liberty to purchase a little 
> Temporary Safety, deserve neither Liberty nor Safety."
>
>
> ----------------------------------------------------------------------
> ------
> --
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here 
> http://p.sf.net/sfu/sfd2d-msazure 
> _______________________________________________
> Assp-test mailing list
> Assp-test@...
> https://lists.sourceforge.net/lists/listinfo/assp-test
>
>
>
> ----------------------------------------------------------------------
> --------
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here 
> http://p.sf.net/sfu/sfd2d-msazure 
> _______________________________________________
> Assp-test mailing list
> Assp-test@...
> https://lists.sourceforge.net/lists/listinfo/assp-test


----------------------------------------------------------------------------
--
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Assp-test mailing list
Assp-test@...
https://lists.sourceforge.net/lists/listinfo/assp-test

Ok, found this out myself, it's the same, sorry for the buzz!

Mvh Pontus

-----Original Message-----
From: Pontus Karlsson [mailto:pontus@...] 
Sent: den 28 mars 2012 11:47
To: 'ASSP development mailing list'
Subject: Re: [Assp-test] Memory footprint

Hi again!

Check!

Related question:
I'm running an older 2.1.1 version on the server I wanna upgrade version on
and when looking under "server information" at the "info and stats" page it
say that I run perl 5.010001, but I know for a fact that it's
5.10.1.(reading the perl -v output) Is this just an old bug or does ASSP
read perl version from somewhere else?
I would take the info from Perl -v before ASSP, but it makes me wonder...

Regards,
Pontus

-----Original Message-----
From: Colin [mailto:assp@...]
Sent: den 28 mars 2012 10:38
To: assp-test@...
Subject: Re: [Assp-test] Memory footprint

http://assp.cvs.sourceforge.net/viewvc/assp/assp2/

You can look at the historical versions of any file there.

Incidentally, I run minimum of 4GB memory for ASSP 2 and wouldn't try to fit
it on 1GB. I/O is currently my bottleneck as I'm having problems with
paravirtualisation but that is another story.

All the best,
Colin.


On 28/03/2012 09:28, Pontus Karlsson wrote:
> Where do I download ASSP 2.1.2 (12057)?
>
> Regards,
> Pontus
>
> -----Original Message-----
> From: Doug Lytle [mailto:support@...]
> Sent: den 28 mars 2012 01:40
> To: ASSP development mailing list
> Subject: Re: [Assp-test] Memory footprint
>
> Doug Lytle wrote:
>> I upgrade this morning from ASSP 2.1.2 (12057)
> I reverted back to 12057 and memory usage has stabilized.
>
> Doug
>
>
> --
> Ben Franklin quote:
>
> "Those who would give up Essential Liberty to purchase a little 
> Temporary Safety, deserve neither Liberty nor Safety."
>
>
> ----------------------------------------------------------------------
> ------
> --
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here 
> http://p.sf.net/sfu/sfd2d-msazure 
> _______________________________________________
> Assp-test mailing list
> Assp-test@...
> https://lists.sourceforge.net/lists/listinfo/assp-test
>
>
>
> ----------------------------------------------------------------------
> --------
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here 
> http://p.sf.net/sfu/sfd2d-msazure 
> _______________________________________________
> Assp-test mailing list
> Assp-test@...
> https://lists.sourceforge.net/lists/listinfo/assp-test


----------------------------------------------------------------------------
--
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Assp-test mailing list
Assp-test@...
https://lists.sourceforge.net/lists/listinfo/assp-test



----------------------------------------------------------------------------
--
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Assp-test mailing list
Assp-test@...
https://lists.sourceforge.net/lists/listinfo/assp-test

Colin wrote:
> Incidentally, I run minimum of 4GB memory for ASSP 2 and wouldn't try to
> fit it on 1GB.

The system is lightly loaded, with 12057, I'm running a steady 850MB.  
It's Debian as the guest and ESXI 5.0 (Free version) as the host

Doug


-- 
Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety."

5.010001 and 5.10.1 are the same - removed leading zeros.

perl -v

This is perl 5, version 14, subversion 1 (v5.14.1) built for 
MSWin32-x86-multi-thread
(with 1 registered patch, see perl -V for more detail)

perl -e "print $]"
5.014001

Thomas


Von:    "Pontus Karlsson" <pontus@...>
An:     "'ASSP development mailing list'" 
<assp-test@...>
Datum:  28.03.2012 11:48
Betreff:        Re: [Assp-test] Memory footprint



Hi again!

Check!

Related question:
I'm running an older 2.1.1 version on the server I wanna upgrade version 
on
and when looking under "server information" at the "info and stats" page 
it
say that I run perl 5.010001, but I know for a fact that it's
5.10.1.(reading the perl -v output)
Is this just an old bug or does ASSP read perl version from somewhere 
else?
I would take the info from Perl -v before ASSP, but it makes me wonder...

Regards,
Pontus

-----Original Message-----
From: Colin [mailto:assp@...] 
Sent: den 28 mars 2012 10:38
To: assp-test@...
Subject: Re: [Assp-test] Memory footprint

http://assp.cvs.sourceforge.net/viewvc/assp/assp2/

You can look at the historical versions of any file there.

Incidentally, I run minimum of 4GB memory for ASSP 2 and wouldn't try to 
fit
it on 1GB. I/O is currently my bottleneck as I'm having problems with
paravirtualisation but that is another story.

All the best,
Colin.


On 28/03/2012 09:28, Pontus Karlsson wrote:
> Where do I download ASSP 2.1.2 (12057)?
>
> Regards,
> Pontus
>
> -----Original Message-----
> From: Doug Lytle [mailto:support@...]
> Sent: den 28 mars 2012 01:40
> To: ASSP development mailing list
> Subject: Re: [Assp-test] Memory footprint
>
> Doug Lytle wrote:
>> I upgrade this morning from ASSP 2.1.2 (12057)
> I reverted back to 12057 and memory usage has stabilized.
>
> Doug
>
>
> --
> Ben Franklin quote:
>
> "Those who would give up Essential Liberty to purchase a little 
> Temporary Safety, deserve neither Liberty nor Safety."
>
>
> ----------------------------------------------------------------------
> ------
> --
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here 
> http://p.sf.net/sfu/sfd2d-msazure 
> _______________________________________________
> Assp-test mailing list
> Assp-test@...
> https://lists.sourceforge.net/lists/listinfo/assp-test
>
>
>
> ----------------------------------------------------------------------
> --------
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here 
> http://p.sf.net/sfu/sfd2d-msazure 
> _______________________________________________
> Assp-test mailing list
> Assp-test@...
> https://lists.sourceforge.net/lists/listinfo/assp-test


----------------------------------------------------------------------------
--
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Assp-test mailing list
Assp-test@...
https://lists.sourceforge.net/lists/listinfo/assp-test



------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here 
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Assp-test mailing list
Assp-test@...
https://lists.sourceforge.net/lists/listinfo/assp-test




DISCLAIMER:
*******************************************************
This email and any files transmitted with it may be confidential, legally 
privileged and protected in law and are intended solely for the use of the 

individual to whom it is addressed.
This email was multiple times scanned for viruses. There should be no 
known virus in this email!
*******************************************************

On 27/03/2012, at 5:09 PM, Thomas Eckardt wrote:

> Sys::MemInfo don't uses the AutoLoader - so Autosplit should not run ??
> 
> check:
> 
> is there a file 
> /Library/Perl/5.12/darwin-thread-multi-2level/auto/Sys/MemInfo/
> autosplit.ix ? - remove/rename it
> are there  files 
> /Library/Perl/5.12/darwin-thread-multi-2level/auto/Sys/MemInfo/*.al ? - 
> remove/rename them
> 
> after that - what files are in 
> /Library/Perl/5.12/darwin-thread-multi-2level/auto/Sys/MemInfo/   ?
> 
> Thomas

No autosplit  or .al files:

$ cd /Library/Perl/5.12/darwin-thread-multi-2level/auto/Sys/MemInfo/
$ ls -l
total 72
-r--r--r--  1 root  wheel      0  5 Oct 16:03 MemInfo.bs
-r-xr-xr-x  1 root  wheel  36076 27 Mar 10:16 MemInfo.bundle


James.

run the following command lines

perl -e 'use Sys::MemInfo; print Sys::MemInfo::totalmem();'
perl -e 'use Sys::MemInfo; print Sys::MemInfo::totalswap();'

I assume the first line will run the second not - I'm right ?

I'll try to find a workaround for that. It seems that 'totalswap()' is 
unsupported on your platform. How ever - I can't find any hint for that in 
the module docu.
Or .... ??? Is it possible that the running user has no permission to get 
system access to the OS - swap - functions ? Try root !

For now - switch off the module in the module config section of the GUI 
and restart assp.

Thomas




Von:    James Brown <jlbrown@...>
An:     ASSP development mailing list <assp-test@...>
Datum:  27.03.2012 08:21
Betreff:        Re: [Assp-test] Antwort: Re: Antwort: Clicking on 'SMTP 
Connections'    crashes ASSP -  Can't   locate Sys/MemInfo




On 27/03/2012, at 5:09 PM, Thomas Eckardt wrote:

> Sys::MemInfo don't uses the AutoLoader - so Autosplit should not run ??
> 
> check:
> 
> is there a file 
> /Library/Perl/5.12/darwin-thread-multi-2level/auto/Sys/MemInfo/
> autosplit.ix ? - remove/rename it
> are there  files 
> /Library/Perl/5.12/darwin-thread-multi-2level/auto/Sys/MemInfo/*.al ? - 
> remove/rename them
> 
> after that - what files are in 
> /Library/Perl/5.12/darwin-thread-multi-2level/auto/Sys/MemInfo/   ?
> 
> Thomas

No autosplit  or .al files:

$ cd /Library/Perl/5.12/darwin-thread-multi-2level/auto/Sys/MemInfo/
$ ls -l
total 72
-r--r--r--  1 root  wheel      0  5 Oct 16:03 MemInfo.bs
-r-xr-xr-x  1 root  wheel  36076 27 Mar 10:16 MemInfo.bundle


James.

------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here 
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Assp-test mailing list
Assp-test@...
https://lists.sourceforge.net/lists/listinfo/assp-test




DISCLAIMER:
*******************************************************
This email and any files transmitted with it may be confidential, legally 
privileged and protected in law and are intended solely for the use of the 

individual to whom it is addressed.
This email was multiple times scanned for viruses. There should be no 
known virus in this email!
*******************************************************

On 27/03/2012, at 5:36 PM, Thomas Eckardt wrote:

> run the following command lines
> 
> perl -e 'use Sys::MemInfo; print Sys::MemInfo::totalmem();'
> perl -e 'use Sys::MemInfo; print Sys::MemInfo::totalswap();'
> 
> I assume the first line will run the second not - I'm right ?
> 
You guessed it!

$ perl -e 'use Sys::MemInfo; print Sys::MemInfo::totalmem();'
4293013504
$ perl -e 'use Sys::MemInfo; print Sys::MemInfo::totalswap();'
Use of inherited AUTOLOAD for non-method Sys::MemInfo::totalswap() is deprecated at -e line 1.
Can't locate auto/Sys/MemInfo/totalswap.al in @INC (@INC contains: /Library/Perl/5.12/darwin-thread-multi-2level /Library/Perl/5.12 /Network/Library/Perl/5.12/darwin-thread-multi-2level /Network/Library/Perl/5.12 /Library/Perl/Updates/5.12.3/darwin-thread-multi-2level /Library/Perl/Updates/5.12.3 /System/Library/Perl/5.12/darwin-thread-multi-2level /System/Library/Perl/5.12 /System/Library/Perl/Extras/5.12/darwin-thread-multi-2level /System/Library/Perl/Extras/5.12 .) at -e line 1


> I'll try to find a workaround for that. It seems that 'totalswap()' is 
> unsupported on your platform. How ever - I can't find any hint for that in 
> the module docu.
> Or .... ??? Is it possible that the running user has no permission to get 
> system access to the OS - swap - functions ? Try root !

Tried it with 'sudo' at the front. No change.
> 
> For now - switch off the module in the module config section of the GUI 
> and restart assp.

Or just not press the 'SMTP Connections' button?

Thanks,

James.

Hello

the email below was not collected , and sending the request to asspblock@ the resend button is not available.
For what reason ASSP didn't collect it in /usr/local/assp/spam , such as all the email with a MessageScoringUpperLimit ?
Is probably correlated to the "weird" from-Address  ?


Mar-27-12 11:57:11 id-33284-03343 [URIBL] 67.228.50.51 <bounces+40111-c106-andreas.philippi=cubu.ro@...> to: andreas.philippi@... [scoring:8] -- URIBL neutral: 'sendgrid.org'(uribl.swinog.ch );
Mar-27-12 11:57:11 id-33284-03343 67.228.50.51 <bounces+40111-c106-andreas.philippi=cubu.ro@...> to: andreas.philippi@... Message-Score: added 8 for URIBL neutral: 'sendgrid.org'(uribl.swinog.ch ), total score for this message is now 8;
Mar-27-12 11:57:11 id-33284-03343 67.228.50.51 <bounces+40111-c106-andreas.philippi=cubu.ro@...> to: andreas.philippi@... Bayesian Check [scoring:48] - Prob: 1.00000 => spam;
Mar-27-12 11:57:11 id-33284-03343 67.228.50.51 <bounces+40111-c106-andreas.philippi=cubu.ro@...> to: andreas.philippi@... Message-Score: added 48 for Bayesian Probability: 1.00000, total score for this message is now 56;
Mar-27-12 11:57:11 id-33284-03343 [MessageScore] 67.228.50.51 <bounces+40111-c106-andreas.philippi=cubu.ro@...> to: andreas.philippi@... [spam found][blocked] -- totalscore(56) over MessageScoringUpperLimit -- [Anuntul tau pe jobber];


Thank you
Graziano