smartctl version 5.33 [i386-pc-mingw32] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD2500AB-00DYA0 Serial Number: WD-WMAEH1676221 Firmware Version: 15.05R15 User Capacity: 250,059,350,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Nov 11 13:38:27 2004 GMT Standard Time SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (7590) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 95) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 200 152 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 127 123 021 Pre-fail Always - 4191 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 50 5 Reallocated_Sector_Ct 0x0033 193 193 140 Pre-fail Always - 111 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 6794 10 Spin_Retry_Count 0x0013 100 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 253 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 50 194 Temperature_Celsius 0x0022 115 253 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 141 141 000 Old_age Always - 59 197 Current_Pending_Sector 0x0012 176 176 000 Old_age Always - 996 198 Offline_Uncorrectable 0x0012 197 161 000 Old_age Always - 139 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 145 155 051 Pre-fail Offline - 1843 SMART Error Log Version: 1 ATA Error Count: 101 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 101 occurred at disk power-on lifetime: 945 hours (39 days + 9 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 03 9d 12 e0 Error: Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 00 25 00 00 08 00 00 44d+06:27:36.700 NOP [Abort queued commands] 1c 00 12 00 00 0b 9d 00 44d+06:27:36.700 RECALIBRATE [RET-4] 00 00 e7 00 00 00 00 00 44d+06:27:36.700 NOP [Abort queued commands] 00 00 26 00 00 59 34 00 44d+06:27:36.700 NOP [Abort queued commands] 00 00 25 00 00 03 00 00 44d+06:27:36.700 NOP [Abort queued commands] Error 100 occurred at disk power-on lifetime: 945 hours (39 days + 9 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 03 9d 12 e0 Error: Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 00 25 00 00 08 00 00 44d+06:27:34.800 NOP [Abort queued commands] 00 00 e7 00 00 00 00 00 44d+06:27:34.800 NOP [Abort queued commands] 00 00 26 00 00 59 34 00 44d+06:27:34.800 NOP [Abort queued commands] 00 00 25 00 00 03 00 00 44d+06:27:34.800 NOP [Abort queued commands] 1c 00 12 00 00 03 9d 00 44d+06:27:34.800 RECALIBRATE [RET-4] Error 99 occurred at disk power-on lifetime: 945 hours (39 days + 9 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 28 03 9d 12 e0 Error: Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 00 25 00 00 28 00 00 44d+06:27:27.000 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 44d+06:27:27.000 NOP [Abort queued commands] 00 00 e7 00 00 00 00 00 44d+06:27:27.000 NOP [Abort queued commands] 00 00 65 00 00 93 a9 00 44d+06:27:27.000 NOP [Abort queued commands] 00 00 25 00 00 2b 00 00 44d+06:27:27.000 NOP [Abort queued commands] Error 98 occurred at disk power-on lifetime: 945 hours (39 days + 9 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 28 03 9d 12 e0 Error: Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 00 25 00 00 28 00 00 44d+06:27:25.050 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 44d+06:27:25.050 NOP [Abort queued commands] 00 00 e7 00 00 00 00 00 44d+06:27:25.050 NOP [Abort queued commands] 00 00 25 00 00 2b 00 00 44d+06:27:25.050 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 44d+06:27:25.050 NOP [Abort queued commands] Error 97 occurred at disk power-on lifetime: 945 hours (39 days + 9 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 2b 03 9d 12 e0 Error: Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 00 25 00 00 2b 00 00 44d+06:27:19.250 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 44d+06:27:19.250 NOP [Abort queued commands] 00 00 e7 00 00 00 00 00 44d+06:27:19.250 NOP [Abort queued commands] 1c 00 12 00 00 00 9d 00 44d+06:27:19.250 RECALIBRATE [RET-4] 00 00 35 00 00 08 00 00 44d+06:27:19.250 NOP [Abort queued commands] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 241 470981891 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.