On 04/14/2010 11:53 PM, Jarod Wilson wrote:
On Wed, Apr 14, 2010 at 4:58 PM, Jongi <email@example.com> wrote:
I am running Debian Unstable, kernel 22.214.171.124 with lirc and
lirc-modules-source version (0.8.6-1~c0.sidux.13). This was done in order to
be able to compile lirc under the kernel.
This is the card in question -
lsusb reports it as follows:
Bus 003 Device 002: ID 185b:3020 Compro
So when I installed I decided to try modprobe lirc_mceusb2. lsmod reports
# lsmod | grep mce
lirc_mceusb 11881 0
lirc_dev 9749 1 lirc_mceusb
usbcore 137017 5 lirc_mceusb,usbhid,ohci_hcd,ehci_hcd
However there is no lircd.conf file for the remote.
You sure 'bout that? The standard mce config ought to work for just
about any rc6 mce remote.
Well thank you good sir. I suppose it makes sense that if a card is
picked up by a certain module it makes sense to use the remote config
for that module rather than for each individual card to its own conf
So I added /usr/sbin/lircd -d /dev/lirc0 to /etc/rc.local
I also copped /etc/lirc/lircd.conf to ~
But from the MCE MythTV wiki, it seems this may be an issue
- IR Receiver is supported
- IR Transmitter is not supported
So I guess my question becomes can I use this as an lirc_mceusb2 device?