tfmegatron - 2005-11-10

Hi,

I am running 2.6.14 currently on debian sid with D-link DWL-G510 Revision B. With versions ndiswrapper-1.3rc1 and later this all seems to be the same. I can scan for my ap and see it along with all the correct settings but the link quality is 0/100. I cannot connect to it. I can't adjust the essid, channel, mac address. Although I can use this same card perfectly in windows xp. I have a laptop using a broadcom card and these kernel versions and ndiswrapper versions work fine. I use driver NetA3AB.inf and A3AB.sys. Although I cannot seem to get debug to work correctly.

Here is my ndiswrapper-buginfo:

utils:
-rwxr-xr-x 1 root root 27235 Nov 9 15:30 /sbin/loadndisdriver
-rwxr-xr-x 1 root root 21476 Nov 9 15:30 /usr/sbin/ndiswrapper

kernel:
Linux version 2.6.14 (root@desktop.cybertron) (gcc version 4.0.3 20051023 (prerelease) (Debian 4.0.2-3)) #1 PREEMPT Fri Oct 28 16:35:28 PDT 2005
kernel sources are in /lib/modules/2.6.14/build

module information:
module(s):
-rw-r--r-- 1 root root 209342 Nov 9 15:30 /lib/modules/2.6.14/misc/ndiswrapper.ko

gcc --version:
gcc (GCC) 4.0.3 20051023 (prerelease) (Debian 4.0.2-3)
Copyright (C) 2005 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

installed drivers:
/etc/ndiswrapper:
total 1
drwxr-xr-x 2 root root 680 Oct 29 09:48 neta3ab

/etc/ndiswrapper/neta3ab:
total 504
lrwxrwxrwx 1 root root 51 Oct 29 09:48 168C:0013.5.conf -> /etc/ndiswrapper/neta3ab/168C:0013:1186:3A12.5.conf
-rw-r--r-- 1 root root 561 Oct 29 09:48 168C:0013:1186:3A12.5.conf
-rw-r--r-- 1 root root 561 Oct 29 09:48 168C:0013:1186:3A13.5.conf
-rw-r--r-- 1 root root 548 Oct 29 09:48 168C:0013:1186:3A14.5.conf
-rw-r--r-- 1 root root 561 Oct 29 09:48 168C:0013:1186:3A17.5.conf
-rw-r--r-- 1 root root 561 Oct 29 09:48 168C:0013:1186:3A18.5.conf
-rw-r--r-- 1 root root 548 Oct 29 09:48 168C:0013:1186:3A63.5.conf
lrwxrwxrwx 1 root root 51 Oct 29 09:48 168C:001A.5.conf -> /etc/ndiswrapper/neta3ab/168C:001A:1186:3A15.5.conf
-rw-r--r-- 1 root root 571 Oct 29 09:48 168C:001A:1186:3A15.5.conf
-rw-r--r-- 1 root root 571 Oct 29 09:48 168C:001A:1186:3A16.5.conf
lrwxrwxrwx 1 root root 51 Oct 29 09:48 168C:001B.5.conf -> /etc/ndiswrapper/neta3ab/168C:001B:1186:3A19.5.conf
-rw-r--r-- 1 root root 548 Oct 29 09:48 168C:001B:1186:3A19.5.conf
-rw-r--r-- 1 root root 548 Oct 29 09:48 168C:001B:1186:3A22.5.conf
-rw-r--r-- 1 root root 450336 Oct 29 09:48 a3ab.sys
-r-xr-xr-x 1 root root 21800 Oct 29 09:48 neta3ab.inf
Reloading ndiswrapper...
ndiswrapper: device wlan0 removed
ACPI: PCI interrupt for device 0000:01:06.0 disabled
ndiswrapper version 1.5 loaded (preempt=yes,smp=no)
ndiswrapper: driver neta3ab (D-Link,03/16/2005,4.0.0.1413) loaded
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11
ndiswrapper: using irq 11
ndiswrapper (ExAllocatePoolWithTag:1090): Windows driver allocating too big a block at DISPATCH_LEVEL: 156820
wlan0: vendor: ''
wlan0: ndiswrapper ethernet device 00:11:95:c2:fd:eb using driver neta3ab, 168C:001A.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK