Ticket #46 (closed defect: wontfix)
With two channels LSI Raid, smartctl check always the first one.
| Reported by: | pgx | Owned by: | samm2 |
|---|---|---|---|
| Priority: | major | Milestone: | |
| Component: | all | Version: | 5.39 |
| Keywords: | megaraid linux | Cc: | dpgilbert |
Description
uname -a
Linux xforce 2.6.26-2-686 #1 SMP Fri Oct 23 23:43:53 UTC 2009 i686 GNU/Linux
smartctl -V
smartctl 5.39 2009-12-09 r2995 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net
smartctl comes with ABSOLUTELY NO WARRANTY. This is free
software, and you are welcome to redistribute it under
the terms of the GNU General Public License Version 2.
See http://www.gnu.org for further details.
smartmontools release 5.39 dated 2009-12-09 at 21:00:32 UTC
smartmontools SVN rev 2995 dated 2009-12-09 at 21:01:43
smartmontools build host: i686-pc-linux-gnu
smartmontools build configured: 2010-01-11 23:51:52 UTC
smartctl compile dated Jan 11 2010 at 23:52:24
smartmontools configure arguments: '--prefix=/usr' '--sysconfdir=/etc' '--mandir=/usr/share/man' '--with-initscriptdir=/etc/init.d' '--with-docdir=/usr/share/doc/smartmontools' '--with-selinux' 'CXXFLAGS=-g -O2' 'LDFLAGS=' 'CPPFLAGS=' 'CFLAGS=-g -O2 -fsigned-char -Wall -O2'
02:0e.0 RAID bus controller [0104]: Dell PowerEdge? Expandable RAID controller 4 [1028:0013] (rev 06)
Subsystem: Dell PowerEdge? Expandable RAID Controller 4e/Di [1028:016d]
Control: I/O- Mem+ BusMaster?+ SpecCycle?- MemWINV+ VGASnoop- ParErr?- Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr?- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (32000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f80f0000 (32-bit, prefetchable) [size=64K]
Region 2: Memory at fe9c0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent?=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [e0] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=4
Status: Dev=02:0e.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=1024 DMOST=4 DMCRS=16 RSCEM- 266MHz- 533MHz-
Kernel driver in use: megaraid
Kernel modules: megaraid_mbox
/usr/sbin/smartctl -a -d megaraid,0 -H /dev/sda : Disk Serial number: 3HW2DAL6
/usr/sbin/smartctl -a -d megaraid,1 -H /dev/sda : Disk Serial number: 3HW2DAP9
/usr/sbin/smartctl -a -d megaraid,0 -H /dev/sdb : Disk Serial number: 3HW2DAL6
/usr/sbin/smartctl -a -d megaraid,1 -H /dev/sdb : Disk Serial number: 3HW2DAP9
/usr/sbin/megactl -v
a0 PERC 4e/Di bios:H418 fw:513O chan:2 ldrv:2 rbld:30% batt:good
a0d0 68GiB RAID 1 1x2 optimal
row 0: a0c0t0 a0c0t1
a0d1 136GiB RAID 5 1x3 optimal
row 0: a0c1t2 a0c1t3 a0c1t4
a0c0t0 SEAGATE ST373453LC 68GiB a0d0 online
a0c0t1 SEAGATE ST373453LC 68GiB a0d0 online
a0c1t2 SEAGATE ST373453LC 68GiB a0d1 online
a0c1t3 SEAGATE ST373453LC 68GiB a0d1 online
a0c1t4 SEAGATE ST373453LC 68GiB a0d1 online
/usr/sbin/smartctl -d megaraid,2 -H /dev/sdb
smartctl 5.39 2009-12-09 r2995 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net
Smartctl open device: /dev/sdb [megaraid_disk_02] failed: INQUIRY failed