Fedora10kvm
From xcat
Directions for setting up xCAT on a Fedora 10 server, and enabling it to use kvm.
Contents |
Pre-install
Before installing, these decisions need to be made:
- Internal IP of headnode - referred to as (xcat_int_ip)
- External IP (internet connected) of headnode - referred to as (xcat_ext_ip)
- External DNS server IP - referred to as (dns_ext_ip)
- Cluster domain - referred to as (cluster_dom)
Network wiring
This setup assumes your xCAT node has eth0 plugged into an existing network, connected to the internet and using DHCP. Eth1 is attached to the switch that the compute nodes are attached to.
Install the operating system
A basic Desktop install will do fine. Turn off the Firewall and SELinux to be able to access the node from your network (most xCAT servers are already behind a company firewall). Install all updates.
Install xCAT
Add the xCAT package repositories
Note: These are for the latest snapshot release which include all the necessary features. It is expected that full support for these features will be in the xCAT 2.2 stable release. See the Download page for more info.
There is not yet a Fedora 10 repository, so we will use the redhat 5 repositroy. There is one dependancy that it does not fulfill, so it must be manually installed first:
wget http://xcat.sourceforge.net/yum/xcat-dep/fedora9/x86_64/conserver-8.1.16-8.x86_64.rpm rpm -i conserver-8.1.16-8.x86_64.rpm cd /etc/yum.repos.d wget http://xcat.sourceforge.net/yum/devel/core-snap/xCAT-core-snap.repo wget http://xcat.sourceforge.net/yum/xcat-dep/rh5/x86_64/xCAT-dep.repo yum clean metadata yum install xCAT
Verify the install
source /etc/profile.d/xcat.sh tabdump site
If the tabdump command works, xCAT is installed.
Setup Networking
Configure the Ethernet interfaces
vi /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 PEERDNS=no BOOTPROTO=dhcp HWADDR=00:14:5E:6B:18:21 ONBOOT=yes ifdown eth0 && ifup eth0 vi /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 BOOTPROTO=static HWADDR=00:14:5E:6B:18:22 ONBOOT=yes IPADDR=(xcat_int_ip) NETMASK=255.255.255.0 ifdown eth1 && ifup eth1
Configure the site table.
This will set the dns to forward requests for the 192.168.0.1 network, set the domain to cluster, set the master and nameserver to 192.168.0.1, and set eth1 to be the dhcp interface.
tabedit site #key,value,comments,disable "xcatdport","3001",, "xcatiport","3002",, "tftpdir","/tftpboot",, "master","10.10.10.100",, "domain","cluster",, "installdir","/install",, "timezone","America/Denver",, "nameservers","192.168.0.1",, "forwarders","192.168.0.1" "dhcpinterfaces","eth1" "ntpservers","0.north-america.pool.ntp.org"
Add the xCAT node and compute nodes to the hosts file
vi /etc/hosts 10.10.10.1 xcat 10.10.10.101 n01 10.10.10 ...
Setup the mac table
n01,eth0,00:11:22:33:44:55:66 n02,eth0,00:11:22:33:44:55:67 ...
Setup the networks table
tabedit networks
There should be an entry for each network the nodes need to access. In this case, DNS is forwarded to the 192.168.0.1 server:
tabedit networks #netname,net,mask,mgtifname,gateway,dhcpserver,tftpserver,nameservers,dynamicrange,nodehostname,comments,disable ,"10.10.10.0","255.255.255.0","eth1","10.10.10.1","10.10.10.1","10.10.10.1","192.168.0.1","10.10.10.200-10.10.10.250",,, ,"192.168.0.0","255.255.0.0","eth0",,,,"192.168.0.1",,,,
Build the DHCP file
makedhcp -n service dhcpd restart
Setup DNS
Be sure to remove bind-chroot if you're using a centos 5.2 install
(or any other system that uses it for that matter!)
xCat doesn't work with bind-chroot, just the regular bind!
yum remove bind-chroot
Edit resolv.conf
vi /etc/resolv.conf set "search cluster" set "nameserver 10.10.10.1"
Build the DNS server
makedns service named start
Setup the xCAT tables
The Site table - this table defines your xCAT environment
Setup the nodelist table
tabedit nodelist "n01","compute,all",,, "n01-ipmi","ipmi,all",,, "n02","compute,all",,, ...
Setup the nodehm table
tabedit nodehm "n01","ipmi","ipmi",,,,,,,,,, "n02","ipmi","ipmi",,,,,,,,,, ...
Setup the noderes,passwd,chain and nodetype tables
chtab node=compute noderes.netboot=pxe noderes.tftpserver=10.10.10.100 noderes.nfsserver=10.10.10.100 noderes.installnic=eth0 noderes.primarynic=eth0 chtab key=system passwd.username=root passwd.password=cluster chtab node=compute nodetype.os=centos5.2 nodetype.arch=x86_64 nodetype.profile=compute nodetype.nodetype=osi chtab node=compute chain.chain="runcmd=standby" chain.ondiscover=nodediscover
Setup Images -do this for the DVD and ISO and '''NOT''' the cd!
copycds CentOS-5.2-i386-bin-DVD.iso
Create the PXE boot files
mknb x86_64
Install the node!
rinstall n01
Advanced features
To create a netboot image:
cd /opt/xcat/share/xcat/netboot/centos
./genimage -i eth0 -n e1000,bnx2 -o centos5.2 -p compute
cd /install/netboot/centos5.2/x86_64/compute/rootimg/etc/
cp fstab fstab.ORIG
vi fstab
add these lines:
compute_x86_64 / tmpfs rw 0 1
none /tmp tmpfs defaults,size=10m 0 2
none /var/tmp tmpfs defaults,size=10m 0 2
- wq
packimage -o centos5.2 -p compute -a x86_64
nodeset (nodename) netboot
rpower (nodename) boot
