On recent linux distributions, FreeCAD is generally easy to build, since all dependencies are usually provided by the package manager. It basically involves 3 steps:
1) Getting the FreeCAD source code 2) Getting the dependencies (packages FreeCAD depends upon) 3) Compiling with "cmake . && make"
Below, you'll find detailed explanations of the whole process and particularities you might encounter. If you find anything wrong or out-of-date in the text below (Linux distributions change often), or if you use a distribution which is not listed, please help us correcting it.
Getting the source
Before you can compile FreeCAD, you need the source code. There are 3 ways to get it:
The quickest and best way to get the code is to clone the read-only git repository (you need the git package installed):
git clone git://free-cad.git.sourceforge.net/gitroot/free-cad/free-cad freecad
This will place a copy of the latest version of the FreeCAD source code in a new directory called "freecad". The first time you try connecting to the free-cad.git.sourceforge.net host, you will receive a message asking to authenticate the sourceforge SSH key, which is normally safe to accept (you can check their SSH keys on the sourceforge website if you are not sure)
There is an always up to date FreeCAD repository on Gihub: github.com/FreeCAD/FreeCAD_sf_master
Alternatively you can download a source package, but they could be already quite old so it's always better to get the latest sources via git or subversion. Depending on your distribution, there are several ways to obtain a source package:
Official FreeCAD source packages (distribution-independent): https://sourceforge.net/projects/free-cad/files/FreeCAD%20Source/ Debian: http://packages.debian.org/source/sid/freecad Ubuntu: http://packages.ubuntu.com/source/precise/freecad
Getting the dependencies
To compile FreeCAD under Linux you have to install all libraries mentioned in Third Party Libraries first. On recent distributions, this is generally just a matter of installing a couple of packages:
Debian and Ubuntu
On Debian-based systems (Debian, Ubuntu, Mint, etc...) it is quite easy to get all needed dependencies installed. Most of the libraries are available via apt-get or synaptic package manager. Below are listed all packgages you need to install. Note that if you don't use the most recent version of your distribution, some of the packages below might be missing from your repositories. In that case, look in the #Older and non-conventional distributions section below.
build-essential cmake python libtool libcoin60-dev libsoqt4-dev libxerces-c-dev libboost-dev libboost-filesystem-dev libboost-regex-dev libboost-program-options-dev libboost-signals-dev libboost-thread-dev libqt4-dev libqt4-opengl-dev qt4-dev-tools python-dev either: libopencascade-dev (official opencascade version) or: liboce*-dev (opencascade community edition) oce-draw gfortran libeigen3-dev libqtwebkit-dev libode-dev swig libzipios++-dev
Optionally you can also install these extra packages:
libsimage-dev (to make Coin to support additional image file formats) checkinstall (to register your installed files into your system's package manager, so yo can easily uninstall later) python-pivy (needed for the 2D Drafting module) python-qt4 (needed for the 2D Drafting module) doxygen and libcoin60-doc (if you intend to generate source code documentation) libspnav-dev (for 3Dconnexion devices support like the Space Navigator or Space Pilot)
You need the following packages:
cmake doxygen swig gcc-gfortran gettext dos2unix desktop-file-utils libXmu-devel freeimage-devel mesa-libGLU-devel OCE-devel python python-devel boost-devel tbb-devel eigen3-devel qt-devel qt-webkit-devel ode-devel xerces-c xerces-c-devel opencv-devel smesh-devel coin2-devel soqt-devel
libspnav-devel (for 3Dconnexion devices support like the Space Navigator or Space Pilot) pivy ( https://bugzilla.redhat.com/show_bug.cgi?id=458975 Pivy is not mandatory but needed for the Draft module )
Building FreeCAD with coin3 is still more hassle on Fedora, since only coin2 is provided in the official repos, but if you wish so anyway, you can avoid to rebuild all the coin3 / soqt / pivy suite by installing coin3-ready packages from http://www.zultron.com/rpm-repo/
You need the following packages to build FreeCAD:
dev-cpp/eigen dev-games/ode dev-libs/boost dev-libs/xerces-c dev-python/pivy dev-python/PyQt4 media-libs/coin media-libs/SoQt sci-libs/opencascade-6.5 sys-libs/zlib virtual/fortran x11-libs/qt-gui x11-libs/qt-opengl x11-libs/qt-svg x11-libs/qt-webkit x11-libs/qt-xmlpatterns dev-lang/swig-2.0.4-r1 app-admin/eselect-python-20091230 dev-lang/python-2.7.2-r3 dev-util/cmake-2.8.4 sys-apps/findutils-4.4.0
Since latest opencascade is not available, you might want to compile opencascade too, hence the following additional libaries are needed:
media-libs/ftgl virtual/opengl x11-libs/libXmu dev-lang/tcl-8.5.9 dev-lang/tk-8.5.9-r1 dev-tcltk/itcl-3.4_beta1 dev-tcltk/itk-3.4_pre20090417 dev-tcltk/tix-8.4.3 x11-libs/gl2ps sys-devel/automake-1.11 sys-devel/autoconf-2.68 sys-devel/libtool dev-java/java-config-2.1.11-r3
You need the following packages:
gcc cmake OpenCASCADE-devel libXerces-c-devel python-devel libqt4-devel python-qt4 Coin-devel SoQt-devel boost-devel libode-devel libQtWebKit-devel libeigen3-devel gcc-fortran
For FreeCAD 0.13 unstable you need to add Eigen3 and swig libraries, that don't seem to be in standard repos. You can get them with one-click install here:
Eigen3: http://software.opensuse.org/search?q=eigen3&baseproject=openSUSE%3A12.1&lang=en&exclude_debug=true swig: http://software.opensuse.org/search?q=swig&baseproject=openSUSE%3A12.1&lang=en&exclude_debug=true
Also, note that Eigen3 Library from Factory Education was causing problems sometimes, so use the one from KDE 4.8 Extra repo
Older and non-conventional distributions
On other distributions, we have very few feedback from users, so it might be harder to find the required packages. Try first locating the required libraries mentioned in Third Party Libraries. Beware that some of them might have a slightly different package name in your distribution (such as name, libname, name-dev, name-devel, etc...).
You also need the GNU gcc compiler version equal or above 3.0.0. g++ is also needed because FreeCAD is completely written in C++. During the compilation some Python scripts get executed. So the Python interpreter has to work properly. To avoid any linker problems during the build process it is also a good idea to have the library paths either in your LD_LIBRARY_PATH variable or in your ld.so.conf file. This is normally already the case in recent distributions.
For more details have also a look to README.Linux in your sources.
Below is additional help for a couple of libraries that might not be present in your distribution repositories
The Eigen3 library is now required by the Sketcher module. This library is only available starting from Ubuntu 11.10 repositories. For prior Ubuntu releases, you can either download it from here and install it manually, or add the FreeCAD Daily Builds PPA to your software sources before installing it through one of the means listed below.
OpenCASCADE community edition (OCE)
OpenCasCade has recently been forked into a Community edition, which is much, much easier to build. FreeCAD can use any version installed on your system, either the "official" edition or the community edition. The OCE website contains detailed build instructions.
OpenCASCADE official version
Note: You are advised to use the OpenCasCade community edition above, which is easier to build, but this one works too.
Not all Linux distributions have an official OpenCASCADE package in their repositories. You have to check yourself for your distribution if one is available. At least from Debian Lenny and Ubuntu Intrepid on an official .deb package is provided. For older Debian or Ubuntu releases you may get unofficial packages from here. To build your own private .deb packages follow these steps:
wget http://lyre.mit.edu/~powell/opencascade/opencascade_6.2.0.orig.tar.gz wget http://lyre.mit.edu/~powell/opencascade/opencascade_6.2.0-7.dsc wget http://lyre.mit.edu/~powell/opencascade/opencascade_6.2.0-7.diff.gz
dpkg-source -x opencascade_6.2.0-7.dsc
# Install OCC build-deps sudo apt-get install build-essential devscripts debhelper autoconf automake libtool bison libx11-dev tcl8.4-dev tk8.4-dev libgl1-mesa-dev libglu1-mesa-dev java-gcj-compat-dev libxmu-dev
#Build Opencascade packages. This takes hours and requires # at least 8 GB of free disk space cd opencascade-6.2.0 ; debuild
# Install the resulting library debs sudo dpkg -i libopencascade6.2-0_6.2.0-7_i386.deb libopencascade6.2-dev_6.2.0-7_i386.deb
Alternatively, you can download and compile the latest version from opencascade.org:
Install the package normally, be aware that the installer is a java program that requires the official java runtime edition from Sun (package name: sun-java6-jre), not the open-source java (gij) that is bundled with Ubuntu. Install it if needed:
sudo apt-get remove gij sudo apt-get install sun-java6-jre
Be careful, if you use gij java with other things like a browser plugin, they won't work anymore. If the installer doesn't work, try:
java -cp path_to_file_setup.jar <-Dtemp.dir=path_to_tmp_directory> run
Once the package is installed, go into the "ros" directory inside the opencascade dir, and do
./configure --with-tcl=/usr/lib/tcl8.4 --with-tk=/usr/lib/tk8.4
Now you can build. Go back to the ros folder and do:
It will take a long time, maybe several hours.
When it is done, just install by doing
sudo make install
The library files will be copied into /usr/local/lib which is fine because there they will be found automatically by any program. Alternatively, you can also do
which will do the same as make install but create an entry in your package management system so you can easily uninstall later. Now clean up the enormous temporary compilation files by doing
Possible error 1: If you are using OCC version 6.2, it is likely that the compiler will stop right after the beginning of the "make" operation. If it happens, edit the "configure" script, locate the CXXFLAGS="$CXXFLAGS " statement, and replace it by CXXFLAGS="$CXXFLAGS -ffriend-injection -fpermissive". Then do the configure step again.
Possible error 2: Possibly several modules (WOKSH, WOKLibs, TKWOKTcl, TKViewerTest and TKDraw) will complain that they couldn't find the tcl/tk headers. In that case, since the option is not offered in the configure script, you will have to edit manually the makefile of each of those modules: Go into adm/make and into each of the bad modules folders. Edit the Makefile, and locate the lines CSF_TclLibs_INCLUDES = -I/usr/include and CSF_TclTkLibs_INCLUDES = -I/usr/include and add /tcl8.4 and /tk8.4 to it so they read: CSF_TclLibs_INCLUDES = -I/usr/include/tcl8.4 and CSF_TclTkLibs_INCLUDES = -I/usr/include/tk8.4
The SoQt library must be compiled against Qt4, which is the case in most recent distributions. But at the time of writing this article there were only SoQt4 packages for Debian itself available but not for all Ubuntu versions. To get the packages built do the following steps:
wget http://ftp.de.debian.org/debian/pool/main/s/soqt/soqt_1.4.1.orig.tar.gz wget http://ftp.de.debian.org/debian/pool/main/s/soqt/soqt_1.4.1-6.dsc wget http://ftp.de.debian.org/debian/pool/main/s/soqt/soqt_1.4.1-6.diff.gz dpkg-source -x soqt_1.4.1-6.dsc sudo apt-get install doxygen devscripts fakeroot debhelper libqt3-mt-dev qt3-dev-tools libqt4-opengl-dev cd soqt-1.4.1 debuild sudo dpkg -i libsoqt4-20_1.4.1-6_i386.deb libsoqt4-dev_1.4.1-6_i386.deb libsoqt-dev-common_1.4.1-6_i386.deb
If you are on a 64bit system, you will probably need to change i386 by amd64.
Pivy is not needed to build FreeCAD or to run it, but it is needed for the 2D Drafting module to work. If you are not going to use that module, you won't need pivy. At the time of writing, Pivy is very new and might not have made its way into your distribution repository. If you cannot find Pivy in your distribution's packages repository, you can grab debian/ubuntu packages on the FreeCAD download page:
or compile pivy yourself:
cMake is a newer build system which has the big advantage of being common for different target systems (Linux, Windows, MacOSX, etc). FreeCAD is now using the cMake system as its main building system. Compiling with cMake is usually very simple and happens in 2 steps. In the first step, cMake checks that every needed programs and libraries are present on your system and sets up all that's necessary for the subsequent compilation. You are given a few alternatives detailed below, but FreeCAD comes with sensible defaults. The second step is the compiling itself, which produces the FreeCAD executable.
Since FreeCAD is a heavy application, compiling can take a bit of time (about 10 minutes on a fast machine, 30 minutes on a slow one)
FreeCAD can be built in-source, which means that all the files resulting from the compilation stay in the same folder as the source code. This is fine if you are just looking at FreeCAD, and want to be able to remove it easily by just deleting that folder. But in case you are planning to compile it often, you are advised to make an out-of-source build, which offers many more advantages. The following commands will compile freecad:
cd freecad (the folder where you cloned the freecad source) cmake . make
Your FreeCAD executable will then reside in the "bin" folder, and you can launch it with:
If you intend to follow the fast evolution of FreeCAD, building in a separate folder is much more convenient. Everytime you update the source code, cMake will then intelligently distinguish which files have changed, and recompile only what is needed. Out-of-source builds are specially handy when using the Git system, because you can easily try other branches without confusing the build system. To build out-of-source, simply create a build directory, distinct from your freecad source folder, and, from the build folder, point cMake to the source folder:
mkdir freecad-build cd freecad-build cmake ../freecad (or whatever the path is to your FreeCAD source folder) make
The FreeCAD executable will then reside in the "bin" directory (within your freecad-build directory).
There are a number of experimental or unfinished modules you may have to build if you want to work on them. To do so, you need to set the proper options for the configuration phase. Do it either on the command line, passing -D <var>:<type>=<value> options to cMake or using one of the availables gui-frontends (eg for Debian, packages cmake-qt-gui or cmake-curses-gui).
As an example, to configure on the command line with the Assembly module built, issue:
cmake -D FREECAD_BUILD_ASSEMBLY:BOOL=ON path-to-freecad-root
Possible options are listed in FreeCAD's root CmakeLists.txt file.
Autotools is in the process of being deprecated in favor of cMake, but at the moment it is still available to build FreeCAD. You must have automake and libtool installed on your system; on Debian/Ubuntu:
aptitude install automake libtool
If you got the sources with git or subversion, then the very first step must be
that creates the configure script and more. For the build process itself we provide a configure script. Just type
To get everything configured. If you want an overview of all options you can specify, you can type
Normally you need none of them - unless you have one of your libraries installed in a really uncommon directory. After configuration has finished, compiling FreeCAD is as simple as
If any error occurs while building from sources, please double-check this page and README.Linux file, then you could jump to the Bug Tracker on SourceForge, choose Any for status and click the Browse button to see previous reports on compile problems. After having built FreeCAD successfully, do
to install it onto your machine. The default install directory is
It will be installed in a FreeCAD folder in your home folder, so you don't need root privileges. Instead of make install, you can also do
In this way FreeCAD will be installed by your package management system, so you can uninstall it easily later. But since all of FreeCAD installation resides into one single directory, just removing the FreeCAD directory is a valid way to uninstall too.
Qt designer plugin
If you want to develop Qt stuff for FreeCAD, you'll need the Qt Designer plugin that provides all custom widgets of FreeCAD. Go to
So far we don't provide a makefile -- but calling
creates it. Once that's done, calling
will create the library libFreeCAD_widgets.so. To make this library known to Qt Designer you have to copy the file to $QTDIR/plugin/designer
If you feel bold enough to dive in the code, you could take advantage to build and consult Doxygen generated FreeCAD's Source documentation
Making a debian package
If you plan to build a Debian package out of the sources you need to install those packages first:
dh-make devscripts lintian (optional, used for checking if packages are standard-compliant)
To build a package open a console, simply go to the FreeCAD directory and call
Once the package is built, you can use lintian to check if the package contains errors
lintian your-fresh-new-freecad-package.deb (replace by the name of the package you just created)
Note for 64bit systems
When building FreeCAD for 64-bit there is a known issue with the OpenCASCADE 64-bit package. To get FreeCAD running properly you might need to run the ./configure script with the additional define _OCC64 set:
For Debian based systems this workaround is not needed when using the prebuilt package because there the OpenCASCADE package is built to set internally this define. Now you just need to compile FreeCAD the same way as described above.
The configure script of FreeCAD makes use of several automake macros that are sometimes not installed with their packages: bnv_have_qt.m4, coin.m4, and soqt.m4. If needed (error while configuring), google for them and you will find them easily. They are just simple scripts that you need to put in your /usr/share/aclocal folder.
To build & install FreeCAD on Fedora 13, a few tips and tricks are needed:
- Install a bunch of required packages, most are available from the Fedora 13 repositories
- Download and build xerces
- Download and build OpenCascade. Need to point it to xmu: ./configure --with-xmu-include=/usr/include/X11/Xmu --with-xmu-library=/usr/lib
- Download and build Pivy. You have to remove 2 references to non existent "SoQtSpaceball.h" from pivy/interfaces/soqt.i Commenting out those two lines allow the build & install to work.
- Configure Freecad. You will need to point it to a few things: ./configure --with-qt4-include=/usr/include --with-qt4-bin=/usr/lib/qt4/bin --with-occ-lib=/usr/local/lib --with-occ-include=/usr/local/inc --with-xercesc-lib=/usr/local/lib
- make - hits a problem where the build is breaking because the ldflags for soqt are set to "-LNONE" which made libtool barf. My hackish workaround was to modify /usr/lib/Coin2/conf/soqt-default.cfg so that the ldflags are "" instead of "-LNONE". After this -> success !
- make install
In Ubuntu Lucid, you don't need the qtwebkit-dev, since it is included into qt4-dev.
Automatic build scripts
Here is all what you need for a complete build of FreeCAD. It's a one-script-approach and works on a fresh installed distro. The commands will ask for root password (for installation of packages) and sometime to acknowledge a fingerprint for an external repository server or https-subversion repository. This scripts should run on 32 and 64 bit versions. They are written for distinct version, but are also likely to run on a later version with or without minor changes.
If you have such a script for your preferred distro, please send it! We will incorporate it into this article.
Note that this script starts by adding the FreeCAD Daily Builds PPA repository so it can proceed with the Eigen3 library (libeigen3-dev) installation. If you already have this library installed on your system, you can remove the first line.
Ubuntu 10.04 LTS - Lucid Lynx / Ubuntu 10.10 Maverick Meerkat / Ubuntu 11.04 Natty Narwhal
sudo add-apt-repository ppa:freecad-maintainers/freecad-daily && sudo apt-get update sudo apt-get install build-essential python libcoin60-dev libsoqt4-dev \ libxerces-c2-dev libboost-dev libboost-date-time-dev libboost-filesystem-dev \ libboost-graph-dev libboost-iostreams-dev libboost-program-options-dev \ libboost-serialization-dev libboost-signals-dev libboost-regex-dev libboost-thread-dev \ libqt4-dev qt4-dev-tools python2.7-dev libopencascade-dev libsoqt4-dev \ libode-dev subversion cmake libeigen2-dev libsimage-dev python-qt4 \ libtool autotools-dev automake bison flex gfortran libeigen3-dev libqtwebkit-dev git # checkout the latest source git clone git://free-cad.git.sourceforge.net/gitroot/free-cad/free-cad freecad # go to source dir cd freecad # build configuration cmake . # build FreeCAD make # test FreeCAD cd bin ./FreeCAD -t 0
# use FreeCAD ./FreeCAD
# Update latest version
# go to source dir cd freecad # Update source git pull # build configuration cmake . # build FreeCAD make
No external Repositories are needed to compile FreeCAD 0.13 with this release. However, there is an imcompatability with python3-devel which needs to be removed. FreeCAD can be compiled from GIT similar to in OpenSUSE 12.2
# install needed packages for development sudo zypper install gcc cmake OpenCASCADE-devel libXerces-c-devel \ python-devel libqt4-devel python-qt4 Coin-devel SoQt-devel boost-devel \ libode-devel libQtWebKit-devel libeigen3-devel gcc-fortran git swig
For FreeCAD 0.13 unstable you need to add Eigen3 and swig libraries, that don't seem to be in standard repos. You can get them with one-click install here:
# install needed packages for development sudo zypper install gcc cmake OpenCASCADE-devel libXerces-c-devel \ python-devel libqt4-devel python-qt4 Coin-devel SoQt-devel boost-devel \ libode-devel libQtWebKit-devel libeigen3-devel gcc-fortran git # create new dir, and go into it mkdir FreeCAD-Compiled cd FreeCAD-Compiled # get the source git clone git://free-cad.git.sourceforge.net/gitroot/free-cad/free-cad # Now you will have subfolder in this location called free-cad. It contains the source # make another dir for compilation, and go into it mkdir FreeCAD-Build1 cd FreeCAD-Build1 # build configuration cmake ../free-cad # build FreeCAD make # test FreeCAD cd bin ./FreeCAD -t 0
Since you are using git, next time you wish to compile you do not have to clone everything, just pull from git and compile once more
# go into free-cad dir created earlier cd free-cad # pull git pull # get back to previous dir cd .. # Now repeat last few steps from before. # make another dir for compilation, and go into it mkdir FreeCAD-Build2 cd FreeCAD-Build2 # build configuration cmake ../free-cad # build FreeCAD make # test FreeCAD cd bin ./FreeCAD -t 0
This script is not working at the moment because:
- libXerces-c-devel seams to be disappeared ....
# install needed packages for development sudo zypper install gcc cmake subversion OpenCASCADE-devel \ libXerces-c-devel python-devel libqt4-devel python-qt4 \ Coin-devel SoQt-devel boost-devel libode-devel libQtWebKit-devel \ libeigen2-devel gcc-fortran # get the source git clone git://free-cad.git.sourceforge.net/gitroot/free-cad/free-cad freecad # go to source dir cd freecad # build configuration cmake . # build FreeCAD nice make # test FreeCAD cd bin ./FreeCAD -t 0
# additional repository (for OpenCascade) sudo zypper -p http://packman.unixheads.com/suse/11.1/ # install needed packages for development sudo zypper install gcc cmake subversion OpenCASCADE-devel \ libXerces-c-devel python-devel libqt4-devel python-qt4 \ Coin-devel SoQt-devel boost-devel libode-devel libQtWebKit-devel \ libeigen2-devel # get the source git clone git://free-cad.git.sourceforge.net/gitroot/free-cad/free-cad freecad # go to source dir cd freecad # build configuration cmake . # build FreeCAD nice make # test FreeCAD cd bin ./FreeCAD -t 0
# get the needed tools and libs sudo apt-get install build-essential python libcoin60-dev libsoqt4-dev \ libxerces-c2-dev libboost-dev libboost-date-time-dev libboost-filesystem-dev \ libboost-graph-dev libboost-iostreams-dev libboost-program-options-dev \ libboost-serialization-dev libboost-signals-dev libboost-regex-dev \ libqt4-dev qt4-dev-tools python2.5-dev \ libsimage-dev libopencascade-dev \ libsoqt4-dev libode-dev subversion cmake libeigen2-dev python-pivy \ libtool autotools-dev automake gfortran # checkout the latest source git clone git://free-cad.git.sourceforge.net/gitroot/free-cad/free-cad freecad # go to source dir cd freecad # build configuration cmake . # build FreeCAD make # test FreeCAD cd bin ./FreeCAD -t 0
Updating the source code
FreeCAD development happens fast, everyday or so there are bug fixes or new features. The cmake systems allows you to intelligently update the source code, and only recompile what has changed, making subsequent compilations very fast. Updating the source code with git or subversion is very easy:
cd freecad (or where you cloned the source code the first time) git pull (if you are using git)
Move into the appropriate build directory and run cmake again (as cmake updates the version number data for the Help menu, ...about FreeCAD), however you do not need to add the path to source code after "cmake", just a space and a dot:
cd ../freecad-build (or wherever your build directory is located) cmake . make